scholarly journals Phytoremediation of soils polluted with heavy metals in the vicinity of the Zenica steel mill in Bosnia and Herzegovina: potential for using native flora

2021 ◽  
Vol 11 (1) ◽  
pp. 31-37
Author(s):  
Senad Murtić ◽  
Hamdija Čivić ◽  
Emina Sijahović ◽  
Ćerima Zahirović ◽  
Emir Šahinović ◽  
...  
2016 ◽  
Vol 857 ◽  
pp. 358-362 ◽  
Author(s):  
Aeslina Abdul Kadir ◽  
Mohd Ruzaini Abd Jalil ◽  
Mohd Mustafa Al Bakri Abdullah

Brick is one of the most common masonry units as a building material due to its properties. Many attempts have been made to incorporate different types of sludge waste into brick such as marble sludge, stone sludge, water treatment sludge, sewage sludge, desalination sludge, textile laundry sludge, ceramic sludge and steel mill sludge. SMS is waste that produced from steel manufacturing industry. This sludge is normally disposed at a hazardous waste landfill site. The objective of this study is to investigate the properties of sludge waste incorporated in fired clay brick. The characteristic of heavy metals in steel mill sludge were determined by using XRF. Characteristic of steel mill sludge shows that some of the heavy metals in steel mill sludge shows higher concentration by following this descending order Zn>Cu>Pb>Sn>Cr>Ba. Four different mixing ratios of steel mill sludge at (0%, 5%, 10%, 15%) were incorporated into fired clay brick to obtain the properties and compared with control brick and standards. In this study, physical and mechanical properties such as shrinkage, density, initial rate of suction and compressive strength test were conducted in the laboratory. Through this study, the results indicate that addition of 5% steel mill sludge into bricks shows the best quality of brick with high compressive strength (16.78N/mm2) and low initial rate of suction (3.80 g/mm2). Nevertheless, the density and shrinkage for all bricks still comply with the requirement and suitable for different work applications. Furthermore, by incorporating sludge waste into fired clay brick could provide an environmental friendly way of disposal method.


2021 ◽  
Vol 72 (4) ◽  
pp. 268-279
Author(s):  
Maida Šljivić Husejnović ◽  
Saša Janković ◽  
Dragica Nikolić ◽  
Biljana Antonijević

Abstract The aim of this study was to assess the risk of human exposure to lead (Pb), cadmium (Cd), and mercury (Hg) through agricultural soil by considering both uncertainty and variability in key exposure parameters. For this reason we collected soil samples from 29 locations in the Tuzla Canton (Bosnia and Herzegovina) and measured their metal levels with inductively coupled plasma atomic emission or absorption spectrometry (ICP-AES and ICP-AAS, respectively). The levels of Pb ranged from 13.33 to 1692.33 mg/kg, of Cd from 0.05 to 3.67 mg/kg, and of Hg from 0.02 to 2.73 mg/kg. To estimate cancer and non-cancer risks we used deterministic and semi-probabilistic methods. Lead was found to involve higher health risk than the other two heavy metals. Its hazard index (HI) decreased between population groups (children>women>men) and exposure routes (ingestion>skin contact>inhalation). Our Monte Carlo simulations indicated that Pb HIs for both adult populations had a 0.6 % probability to exceed the threshold value of 1, while in children this probability was 14.2 %. Cd and Hg showed no probability to exceed the threshold in any scenario. Our simulation results raise concern about possible adverse health effects of heavy metals from soil, especially in children. It is very important to continue monitoring environmental pollution and assess human health risk, not only with respect to soil, but also with other important environmental compartments, such as air and water.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jasmina Djedjibegovic ◽  
A. Marjanovic ◽  
D. Tahirovic ◽  
K. Caklovica ◽  
A. Turalic ◽  
...  

2016 ◽  
Vol 857 ◽  
pp. 347-351
Author(s):  
Aeslina Abdul Kadir ◽  
Muhammad Khuzaimy Kamarul Halim ◽  
Noor Amira Sarani ◽  
Mohd Mustafa Al Bakri Abdullah

The reuse of sludge in clay brick material is a long-term approach to sludge disposal for economic and environmental sustainability. In this study, steel mill sludge collected from Kluang, Johor was used to be investigated to replace clay as brick material. The raw material has been characterized using X Ray Fluorescent (XRF) analysis. The optimum moisture content (OMC) and maximum dry density (MDD) of the soil used was performed by using Standard Proctor Compaction Test in order to verify percentages of water used during brick manufacturing. Brick were manufactured into different percentages which are control brick (0%) and steel mill sludge brick with 5%, 10% and 15% of steel mill sludge waste. Manufactured brick was dried and fired in a furnace at 1050 °C. The results showed that zinc (Zn) and copper (Cu) are the higher heavy metal concentrations detected in steel mill sludge. Meanwhile, leachability test showed that heavy metals leached from steel mill sludge brick are low under permissible limit and complied with United States Environmental Protection Agency (USEPA).


Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 143
Author(s):  
Barbara Godzik

In Poland, the first studies using mosses as indicators of the heavy metal air pollution level were carried out in national parks already in the 1970s. They were continued later in 10-year intervals. In 1990, when Poland join the European Heavy Metals Deposition Program, the entire area of the country was included in such research. Moss surveys were repeated at five-year intervals, to varying degrees. Pleurozium schreberi samples were collected from 150 (1990) to over 300 sites (1995 and 2015) throughout the country, either in selected regions diversified in terms of both the level of industrialization and urbanization (2001 and 2015), or only in national parks (2005). On a small scale, changes in the level of heavy metals were recorded in the period from 1975 to 2014 in the Niepołomice Forest located near Kraków. Concentrations of ten heavy metals were constantly monitored. Additionally, in some moss surveys, other elements or compounds, such as 137cesium, PAHs and nitrogen were analyzed. During the 1990s, in all of Europe, there was a significant decrease in the level of heavy metals. In Poland, the spatial patterns of metal accumulation in mosses were similar throughout the entire study period: The southern part of the country, more industrialized and densely populated, is still the most polluted, and the northeastern part belongs to the cleanest regions. In the Niepołomice Forest, emissions from the big steel mill and from the Kraków agglomeration had the greatest impact on pollution from the 1970s to the 1990s, but lately the impact of local emission sources is more visible. Compared to other European countries, Poland and neighboring countries of Central Europe are at the forefront of the most polluted areas in Europe.


2021 ◽  
Vol 67 (No. 9) ◽  
pp. 533-540
Author(s):  
Senad Murtić ◽  
Ćerima Zahirović ◽  
Hamdija Čivić ◽  
Emina Sijahović ◽  
Josip Jurković ◽  
...  

This study evaluated the phytoremediation potential of eight native plant species on heavy metal polluted soils along the Spreča river valley (the northeast region of Bosnia and Herzegovina). Plants selected for screening were: ryegrass (Lolium perenne L.), common nettle (Urtica dioica L.), mugwort (Artemisia vulgaris L.), wild mint (Mentha arvensis L.), white clover (Trifolium repens L.), alfalfa (Medicago sativa L.), dwarf nettle (Urtica urens L.) and yarrow (Achillea millefolium L.). All aboveground parts of selected native plants and their associated soil samples were collected and analysed for total concentration of Ni, Cr, Cd, Pb, Zn and Cu. The bioaccumulation factor for each element was also calculated. The levels of Cr (90.9–171.1 mg/kg) and Ni (80.1–390.5 mg/kg) in the studied soil plots were generally higher than limits prescribed by European standards, indicating that the soils in the Spreča river valley are polluted by Cr and Ni. Among the eight screened plant species, no hyperaccumulators for toxic heavy metals Ni, Cr, Cd and Pb were identified. However, the concentrations of toxic heavy metals in the above-ground parts of Artemisia vulgaris L. and Trifolium repens L. were significantly higher than in the other studied plants, indicating that both plant species are useful for heavy metal removal.  


Author(s):  

The study is devoted to adventive macrophyte Lemna gibba L. (duckweed) adaptive reactions to pollution of water by heavy metals. Under the high technogenic impact on aquatic ecosystems, some invasive species quickly spread and crowd out of native flora. In this regard, studies of the physiological and biochemical mechanisms of these species tolerance, contributing to their successful resettlement are of particular importance. The results of two years of research (July 2016–2017) on the study of accumulative abilities in relation to heavy metals (nickel, copper, zinc, manganese and iron) and some morphophysiological parameters of L. gibba – one of the adventive flora representatives of the Middle Urals is presented. Plant material and surface water samples were taken from two water bodies of the Sverdlovsk region, differing in levels of technogenic impact: the Iset River (Aramil town) and its tributary the Sysert River (Dvurechensk town). It was found that Cu, Ni and Mn concentration in the Iset River were on average 1.5 times and Zn – 4.0 times higher than that in the Sysert River. It was shown that the fronds of the studied macrophyte from the habitat with an increased water pollution (the Iset River) were distinguished by a more significant accumulation of metals, larger mesophyll cells, a higher content of photosynthetic pigments and increased activity of catalase and polyphenol oxidase enzymes compared to plants from the water body with a lower level of pollution (the Sysert River). It is concluded that the physiological and biochemical adaptations revealed in L. gibba increase its competitiveness and play an important role in the development of new territories, including technologically disturbed ones.


Sign in / Sign up

Export Citation Format

Share Document