Vibroacoustic Measurements and Simulations Applied to External Gear Pumps. An Integrated Simplified Approach

2016 ◽  
Vol 41 (2) ◽  
pp. 285-296 ◽  
Author(s):  
Eleonora Carletti ◽  
Giuseppe Miccoli ◽  
Francesca Pedrielli ◽  
Giorgio Parise
Keyword(s):  
Complex Dynamics ◽  
Gear Tooth ◽  
Fluid Pressure ◽  
Sound Intensity ◽  
Integrated Approach ◽  
Gear Pump ◽  
Simplified Approach ◽  
Noise Field ◽  
Gear Pumps ◽  
External Gear Pump

Abstract This paper describes the development phases of a numerical-experimental integrated approach aimed at obtaining sufficiently accurate predictions of the noise field emitted by an external gear pump by means of some vibration measurements on its external casing. Harmonic response methods and vibroacoustic analyses were considered as the main tools of this methodology. FFT acceleration spectra were experimentally acquired only in some positions of a 8.5 cc/rev external gear pump casing for some working conditions and considered as external excitation boundary conditions for a FE quite simplified vibroacoustic model. The emitted noise field was computed considering the pump as a ‘black box’, without taking into account the complex dynamics of the gear tooth meshing process and the consequent fluid pressure and load distribution. Sound power tests, based on sound intensity measurements, as well as sound pressure measurements in some positions around the pump casing were performed for validation purposes. The comparisons between numerical and experimental results confirmed the potentiality of this approach in offering a good compromise between noise prediction accuracy and reduction of experimental and modelling requirements.

Computer Prediction of Cyclic Excitation Sources for an External Gear Pump

1985 ◽  
Vol 199 (3) ◽  
pp. 175-180 ◽  
Author(s):  
K Foster ◽  
R Taylor ◽  
I M Bidhendi
Keyword(s):  
Computer Program ◽  
Gear Pump ◽  
Computer Prediction ◽  
Pressure Distributions ◽  
External Gear Pumps ◽  
Theoretical Predictions ◽  
Gear Pumps ◽  
External Gear Pump

A description is given of a computer program for investigating the performance of the external gear pumps under varying conditions with the special emphasis on the examination of pressure distributions within the pump, i.e. excitation forces for the vibration of the pump case and the variation in flow generated by the pump. Measurements are presented for the variation with time of tooth space pressure and the results are compared with the theoretical predictions from the computer program.

Experimental Investigation of Flowrate Irregularity in Rotary Gear Pumps

1992 ◽  
Author(s):  
G. Mimmi
Keyword(s):  
Experimental Investigation ◽  
Flow Rate ◽  
Experimental Tests ◽  
Periodic Variation ◽  
Experimental Results ◽  
Gear Pump ◽  
Gear Pumps ◽  
Hot Film ◽  
Instantaneous Flow Rate ◽  
External Gear Pump

Abstract In a previous paper the author proposed a method to reduce the periodic variation in flow rate for an external gear pump. To verify the experimental results, a series of experimental tests on a expressly realized gear pump, was carried out. The pump was equipped with relieving grooves milled into the side plates. The tests were done on a closed piping specifically realized and equipped for measuring the instantaneous flow rate of the fluid through a wedge-shaped hot film probe.

A gear pump based on harmonic gear drive

2013 ◽  
Vol 227 (12) ◽  
pp. 2844-2848 ◽  
Author(s):  
Hai-Lin Zhu ◽  
Peng Ning ◽  
Min Zou ◽  
Xingpei Qin ◽  
Jun Pan
Keyword(s):  
Service Life ◽  
Fluid Pressure ◽  
Gear Pump ◽  
Flow Pulsation ◽  
Flow Ripple ◽  
Gear Drive ◽  
Mutual Engagement ◽  
Gear Pumps ◽  
New Type ◽  
Total Discharge

Aimed at solving the problems of radial fluid pressure imbalance, bigger flow ripple and shorter service life that exists in traditional gear pumps, a new type of gear pump based on the principle of harmonic gear drive is put forth, where the function for pumping fluid is achieved by mutual engagement between flexible gear and rigid gear. The structural composition, principle and features of the new gear pump are described in this article. The new pump has two higher pressure cavities arranged symmetrically, which counteracts the fluid pressure and the pump could work longer. Its displacement is two times that of the conventional gear pump and the total discharge is bigger. Flow pulsation, vibration and noise in the new pump are evidently diminished, which make the operation smooth. The new gear pump has superiority in performance and could guide the development in gear pump technology.

The Flow Pulsation Analysis of an External Gear Pump

2011 ◽  
Vol 236-238 ◽  
pp. 2327-2331
Author(s):  
Yan Zhi Li ◽  
Li Huan Gao ◽  
Xiao Yang Tang
Keyword(s):  
Pulse Amplitude ◽  
Gear Pump ◽  
Flow Pulsation ◽  
Flow Ripple ◽  
Pump Flow ◽  
External Gear Pumps ◽  
Tooth Width ◽  
Different Types ◽  
Gear Pumps ◽  
External Gear Pump

In this paper, the theoretical flow ripple of an external gear pump is studied for pumps of similar size using different numbers of teeth on the driving and driven gears. External gear pumps with three different types of tooth profiles are studied. Nondimensional flowrates and fluctuation coefficients of gear pumps are discussed. By using the formula, flowrates can be calculated accurately and efficiently. Results indicate that: in the case of the same displacement (except teeth number and tooth width, other parameters of the gear pump are the same) the gear pump flow pulsation decreases with the increasing of the teeth number. We also concluded that changing tooth profiles on the driving and driven gear can get different pulse amplitude of the flow ripple.

Experimental Validation of a Model for the Dynamic Analysis of Gear Pumps

2013 ◽  
Author(s):  
Emiliano Mucchi ◽  
Giorgio Dalpiaz
Keyword(s):  
Experimental Validation ◽  
Gear Pump ◽  
Test Plate ◽  
Operational Conditions ◽  
Experimental Apparatus ◽  
Gear Pumps ◽  
Force Components ◽  
Set Up ◽  
The Time Domain ◽  
External Gear Pump

This paper concerns the experimental validation of an elastodynamic model of an external gear pump for steering systems in vehicles. The elastodynamic model takes into account the most important phenomena involved in the operation of this kind of machines. Two main sources of noise and vibration can be considered: pressure and gear meshing. An experimental apparatus has been set up for the measurements of the case accelerations and force components in operational conditions. The model was validated by comparison between simulations and experimental results concerning forces and moments: it deals with the external and inertia components acting on the gears, estimated by the model, and the reactions and inertia components on the pump case and the test plate, obtained by measurements. The validation is carried out comparing the level of the time synchronous average in the time domain and the waterfall maps in the frequency domain, with particular attention to identify system resonances. The validation results are globally satisfactory.

scholarly journals The Influence of Radial and Axial Gaps on Volumetric Efficiency of External Gear Pumps

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4468
Author(s):  
Paulina Szwemin ◽  
Wieslaw Fiebig
Keyword(s):  
Fluid Flow ◽  
Volumetric Efficiency ◽  
Operating Parameters ◽  
Gear Pump ◽  
Cfd Model ◽  
External Gear Pumps ◽  
Flow Phenomena ◽  
Gear Pumps ◽  
The Impact ◽  
External Gear Pump

The design of gear pumps and motors is focused on more efficient units which are possible to achieve using advanced numerical simulation techniques. The flow that appears inside the gear pump is very complex, despite the simple design of the pump itself. The identification of fluid flow phenomena in areas inside the pump, considering the entire range of operating parameters, is a major challenge. This paper presents the results of simulation studies of leakages in axial and radial gaps in an external gear pump carried out for different gap shapes and sizes, as well as various operating parameters. To investigate the processes that affect pump efficiency and visualize the fluid flow phenomena during the pump’s operation, a CFD model was built. It allows for a detailed analysis of the impact of the gears’ eccentricity on leakages and pressure build-up on the circumference. Performed simulations made it possible to indicate the relationship between leakages resulting from the axial and radial gap, which has not been presented so far. To verify the CFD model, experimental investigations on the volumetric efficiency of the external gear pump were carried out. Good convergence of results was obtained; therefore, the presented CFD model is a universal tool in the study of flow inside external gear pumps.

scholarly journals Design Multistage External Gear Pumps for Dry Sump Systems: Methodology and Application

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Davide Guerra ◽  
Marco Polastri ◽  
Mattia Battarra ◽  
Alessio Suman ◽  
Emiliano Mucchi ◽  
...  
Keyword(s):  
Fluid Dynamic ◽  
Gear Tooth ◽  
Design Procedure ◽  
Journal Bearings ◽  
Gear Pump ◽  
Operational Parameters ◽  
Systems Methodology ◽  
External Gear Pumps ◽  
Calculation Step ◽  
Gear Pumps

Thanks to their manufacturing simplicity, robustness, and consolidated design knowledge, external gear pumps are widely adopted in the automotive fields. With the purpose of leading the design procedure of these positive displacement machines, within this work, the authors integrate in a comprehensive tool the salient equations adopted for the design of the major gear pump features. The presented procedure is devoted to the design of multistage external gear pumps characterized by a singular floating driving shaft supported by fluid-dynamic journal bearings. Focusing the attention on the procedure flexibility, it has been structured in three iterative calculation phases. The core section of the methodology concerns the geometrical design of the involute gear tooth profile. It is oriented to ensure a proper volumetric displacement while complying with the space requirement and the tooth manufacturing limitations. Thus, through the analytical pressure loads estimation combined with the operational parameters, the second calculation step provides the design of the driving shaft and the relevant dimensions of the journal bearings. Finally, by means of a power loss approach, the third macrosection of the procedure leads to estimating the clearances between gear tip and housing. The potentials of the methodology are exposed by describing its applications to a case study of multistage gear pump employed in the dry sump lubrication system of an automotive heavy-duty engine. Each calculation step application is outlined with reference to the proposed analytical formulation and the results of the parameters calibration are presented. Within this context, the procedure is assessed by means of a CFD analysis. The results highlight the accuracy of the methodology on the estimation of the required delivery flow rate. Aside from being accurate, flexible, and reliable, the procedure stands out for being an innovative tool within the multistage gear pump framework.

A Numerical Procedure to Design the Optimal Axial Balance of Pressure Compensated Gear Machines

2014 ◽  
Author(s):  
Divya Thiagarajan ◽  
Andrea Vacca
Keyword(s):  
Numerical Procedure ◽  
Operating Conditions ◽  
Force Balance ◽  
Gear Pump ◽  
Power Losses ◽  
Outlet Port ◽  
External Gear Pumps ◽  
Gear Pumps ◽  
Force Components ◽  
External Gear Pump

This paper presents an innovative numerical procedure to determine the optimal balancing area of lateral bushes in external gear pumps or motors. In pressure compensated designs of external gear machines, the lateral bushes perform the important functions of sealing the tooth space volumes while they transfer fluid from the inlet to the outlet port. In normal operating conditions, a lubricating gap exists between the lateral bush and the gear permitting to minimize losses due to shear stress and leakage. These conditions are found by determining proper balancing areas at the side of the bushes not facing the gears, in which the pressure of the high pressure port is properly established. This problem is also known as “axial balance” of external gear machines. To determine the optimal axial balance which minimizes the power losses associated with the lubricating gap in all operating conditions, all the static and hydrodynamic forces acting on the lateral bushes have to be considered. This delicate aspect of external gear units design is usually addressed through empirical procedures; while in this paper an automatic numerical procedure is presented. The proposed method is based on the solution of the force balance of the lateral bushes, taking into account all force components, including the hydrodynamic terms due to the relative inclination between bushes and gears and material deformation. After detailing the procedure, the paper describes its potentials by showing the advantages arising from the optimization of the axial balance of a particular external gear pump for fluid power applications.

scholarly journals Experimental and Numerical Study on the Flow Ripple of Circular-arc Gear Pumps Considering the Center Distance Deviation

2021 ◽  
Author(s):  
Xiaoling Wei ◽  
Yongbao Feng ◽  
Zhenxin He ◽  
Ke Liu
Keyword(s):  
Pressure Pulsation ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Gear Tooth ◽  
Tooth Profile ◽  
Gear Pump ◽  
Circular Arc ◽  
Gear Pumps ◽  
Distance Deviation ◽  
Center Distance

Abstract Novel circular-arc gear pumps effectively solve the problems of oil trapping and flow pulsation experienced with traditional gear pumps. However, the center distance deviation associated with assembly and installation during gear pump processing has an important influence on the outlet pressure pulsation characteristics of circular-arc gear pumps. First, the circular-arc tooth profile equation, conjugate curve equation and meshing line equation were derived to design the circular-arc gear meshing and center distance deviation functions. Second, the circular-arc gear tooth profile was accurately obtained. Then, a pressure pulsation characteristic simulation model for the novel circular-arc gear pumps considering the center distance deviation was established. The results show that with the increase of center distance deviation, the outlet flow rate of the arc gear pump increases first and then decreases greatly. Moreover, the center distance deviation has little effect on the independent tooth cavity pressure. Finally, the proposed fluid dynamic model is used to simulate a commercial circular-arc gear pump, which was tested within this research for modeling validation purposes. The comparisons highlight the validity of the proposed simulation approach.

Efficiency of External Gear Pump

2021 ◽  
pp. 53-61
Author(s):  
N.L. Velikanov ◽  
V.A. Naumov
Keyword(s):  
Mechanical Efficiency ◽  
Fuel Oil ◽  
Pump Efficiency ◽  
Gear Pump ◽  
Technical Data ◽  
External Gear Pumps ◽  
Gear Pumps ◽  
Load Characteristics ◽  
External Gear Pump ◽  
Research Show

The purpose of the research was to analyze the load characteristics of external gear pumps. As the initial data, the results of factory tests of the NMSH and SH pumps, provided by HMS Livgidromash JSC, were used. The load characteristics of the gear pump NMSH32-10 were constructed, and the dependence of this pump efficiency on the dimensionless pressure and Hersey number was given. The efficiency of the SH 40-4 pump was recalculated according to the test data. Findings of research show that for diesel fuel and oil, the calculated efficiency differs from the values indicated in the technical data sheet by more than 25%, while for fuel oil they differ slightly. This testifies to the non-monotonic dependence between the SH 40-4 pump efficiency and the viscosity. In the entire investigated range of pressures, with an increase in the viscosity of the pumped liquid, the efficiency first increases and then noticeably decreases. The paper presents the dependence of the volumetric and mechanical efficiency of the SH 40-4 pump on the Hersey number at three values of the viscosity of the pumped liquid.

Sign in / Sign up

Export Citation Format

Share Document