scholarly journals New Trends in Geoproducts Development: Železné Hory National Geopark Case Study

2018 ◽  
Vol 7 (2) ◽  
pp. 179-195 ◽  
Author(s):  
Jan Doucek ◽  
Josef Zelenka

Abstract Geotourism is still a relatively new direction of tourism and its development is bound mainly to the territory of geoparks. Many geoparks try to develop different types of geo-products with a focus on different target groups. However, the nature of these products is very different and their development is evident mainly in the time scale. In the past, simple forms of interpretation and application of geoproducts were popular, whereas currently, modern technologies such as animations or augmented reality are thriving. This is mainly due to the better availability of technological equipment. At the same time, a number of geoparks boast of above-average interpreters, who are able to render and simplify difficult geological topics. This also applies to their ability to create of new geoproducts, where the need to abbreviate and condense information is evident. The results of the study show a positive trend in the use of modern methods in geoscience interpretation and in the creation of new geoproducts. At the same time, it is clear that without a modern concept it is very difficult to reach the current visitors. Therefore, such a concept is necessary in order to develop geoscientific issues, especially in the area of geoparks.

Author(s):  
Karamagioli Evika

Over the past few years the concepts of government and governance have been dramatically transformed. Not only is this due to increasing pressures and expectations that the way we are governed should reflect modern methods of efficiency and effectiveness, but also that government should be more open to democratic accountability. The following chapter will introduce the social impact dimension of e-democracy while proposing concrete directions and incentives that should be provided for engagement through electronic means. The intention is to highlight the fact that technology is the result of a combination of tools, social practices, social organizations, and cultural meanings. It not only represents social arrangements, but also has the potential to facilitate and / or limit different types of interaction.


Machines ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 29 ◽  
Author(s):  
Leonardo Frizziero ◽  
Alfredo Liverani ◽  
Gianni Caligiana ◽  
Giampiero Donnici ◽  
Luca Chinaglia

Today’s market drives companies to change, adapt, and compete. Many consumers are increasingly looking at price, without sacrificing quality. In order to be attractive to the customer, companies must be able to offer the required quality at the lowest possible price. The life cycle of many products has been shortened compared to the past because now technologies are evolving faster. For these reasons, it is important that companies reevaluate all the operations that are carried out within them, to optimize them and eventually adopt new technologies if they offer interesting opportunities. In this discussion, we first study the design for disassembly, a technique that can bring several advantages during the life cycle of a component, offering the possibility of reducing time and cost of disassembling a product, and better reuse of the different materials of which it is composed. Subsequently, augmented reality is discussed, and how this technology is exploited in the world, especially in the industrial sector. During the work, we discuss a case study, with the gearbox being the object of analysis. This allows us to apply the theoretical concepts illustrated in a concrete way, allowing for a better understanding of the topics.


2018 ◽  
Author(s):  
Karel Van Nieuwenhuyse

Torn between patriotic, civic and disciplinary aspirations. Evolving faces of Belgian and Flemish history education, from 1830 to the futureHistory education worldwide faces competing, rival visions and even contrasting expectations. Those expectations can be clustered in three main groups, each pursuing a different main goal for and a different approach towards studying the past: ‘nation-building and social cohesion’, ‘democratic participation and civic behavior’, and ‘disciplinary understanding’. This contribution examines how secondary school history education in Belgium (since its establishment in 1830) has been given shape, and how its main goals have evolved. Belgium (and later on Flanders) serves as an interesting case study, as the country testifies to a difficult, contested past, has evolved into a nation-state in decline, and is increasingly characterized by intercontinental immigration. Using the three clusters of rival expectations as an analytical framework, it is analyzed what the consecutive main goals for the school subject of history have been, which changes occurred throughout the past two centuries and why, and what have been the effects of these different types of history education on young people. The analysis allows to discern three main stages in the history of history education in Belgium/Flanders. For all three, the main goals are explained, and their effects examined. This contribution concludes with critically discussing the different aims, and, while reporting on the current reform of the school subject of history in Flanders, setting a fourth aim to the fore. Rozziew pomiędzy aspiracjami patriotycznymi, obywatelskimi i zrozumieniem dyscypliny. Ewolucja oblicza nauczania historii w szkołach Belgii i Flandrii od 1830 roku i jego przyszłośćNa całym świecie nauczanie historii napotyka konkurujące i rywalizujące ze sobą wyobrażenia, a nawet rodzi sprzeczne oczekiwania. Oczekiwania owe można ująć w trzy kompleksy zasadniczych zagadnień, przy czym każdy z nich ma inny główny cel studiowania przeszłości i inaczej do niego podchodzi; są to: „budowanie narodu i spójność społeczna”, „demokratyczna partycypacja i postawy obywatelskie” oraz „rozumienie dyscypliny”. Artykuł omawia, w jaki sposób kształtowało się nauczanie historii w szkołach średnich w Belgii (od jej powstania w 1830 roku) i jak ewoluowały jego główne cele. Belgia (a później Flandria) służy jako interesujący przypadek badawczy, gdyż kraj ten doświadczył trudnej, kontestowanej przeszłości, stał się państwem jednonarodowym w upadku i coraz bardziej właściwa mu jest międzykontynentalna imigracja. Wykorzystując wspomniane wyżej trzy kompleksy złożonych oczekiwań jako analityczne ramy badawcze, autor analizuje najistotniejsze zadania, które stoją przed przedmiotem szkolnym historia, następnie omawia zmiany, które zaszły w tym zakresie w minionych dwóch stuleciach i wyjaśnia ich przyczyny, a wreszcie docieka, jaki wpływ odmienne rodzaje nauczania historii wywarły na młodych ludzi. Analiza pozwala wyróżnić trzy zasadnicze etapy w dziejach nauczania historii w Belgii / Flandrii. Autor objaśnia, jakie główne cele stały przed wszystkimi trzema grupami i jakie przyniosły efekty. Artykuł zamyka krytyczna ocena omawianych celów oraz przedstawienie aktualnie mającej miejsce reformy przedmiotu szkolnego historia we Flandrii, a na końcu wskazanie czwartego celu: edukacji na przyszłość. [Trans. by Jacek Serwański]


2021 ◽  
Vol 102 (7) ◽  
pp. 20-25 ◽  
Author(s):  
Stephanie Brown ◽  
Annie Allen

In the past decade, research-practice partnerships (RPPs) have grown in number and reputation. Stephanie Brown and Annie Allen describe the varied ways partnerships facilitate more sustained and productive relationships between researchers and practitioners. They share key findings from a comparative case study of three different types of RPPs focused on mathematics instructional improvement conducted by the National Center for Research in Policy and Practice (NCRPP) and make recommendations for how partnerships can build more authentic bridges between research and practice.


Author(s):  
Yunlong Zhang ◽  
Dongfeng Wu

This study focuses on developing methodologies to predict the service life of a pavement marking material based on its retroreflectivity. Data from the 2002 National Transportation Product Evaluation Program (NTPEP) pavement marking material test deck in Mississippi are used for model development and model validation. The smoothing spline method and time series modeling are applied to estimate the service lives of different types of materials based on the assumption of a required minimum retroreflectivity value. The same models can also predict the retroreflectivity values at future times for a pavement marking product based on its retroreflectivity values in the past. The validation of the models shows satisfactory accuracy. As demonstrated in a case study, the predicted service lives of the marking materials can be used in life-cycle cost comparisons for selecting pavement marking material.


2021 ◽  
Vol 12 (1) ◽  
pp. 159-165
Author(s):  
Kritika Thakur ◽  
Sangeeta H Toshikhane ◽  
Dinesh Patil ◽  
Shikha Desai

Vata among tridosha is considered as the controller of everything in the Sharira. Vitated Vata itself effects the Dusyas which pervades the entire body or a part of it and gives rise to different types ailment is called Vatavyadhi. Pakshaghata is one of the important diseases of such criteria which is popularly known as Hemiplegia. A 60 years old male Patient, K/C/O of HTN Since 3 year & Stroke 3 Months ago complaining of Kinchita Vak-Aspastata (incomplete speech), Bhar-Vruddhi (Heaviness of left limbs), Vama bahu Karma alpata (Left upper limb weakness), Vama amsha sandhi stabhata (Left shoulder stiffness) since 3 Month. Patient was on various treatment methods for the past 2 months but did not get complete improvement. He came to Parul Ayurveda Hospital.  The patient was treated with Panchakarma procedure, Shamana Aushadhi and Physiotherapy. This study shows the effective result of Panchakarma treatment along with Shamana Aushadhi and Physiotherapy in Pakshaghata disease. It also helps to understand the pathophysiology of Pakshaghata through Ayurveda. In this study an attempt has been made to describe all Scientific effect of Panchakarma procedures, Shaman Aushadhis and effect of Physiotherapy has been explained in this case. 


Popular Music ◽  
2019 ◽  
Vol 38 (03) ◽  
pp. 457-480
Author(s):  
Michael Ahlers

AbstractThe article begins with a short history of German gangsta rap, followed by an overview of central theories and key concepts in hip-hop studies. It then focuses on a case study of a German gangsta rapper called Kollegah, who became one of Germany's most commercially successful artists of the past few years. The case study is divided into three parts: the first involves a deconstruction of both his artistic persona and his strategies of appropriating hip-hop cultures. This is followed by a closer look at two Kollegah productions, focusing on his rhyming and signifying skills. By adding a cursory qualitative media analysis of both Internet fan forums and print and television artefacts about Kollegah, very contradictory reactions can be depicted. The article is finally able to illustrate that this artist makes great use of a (typically German?) flavour of virtuosity and that he can draw from a very unique set of capital. Kollegah is viewed as representing a successful strategy of cultural appropriation and the use of different types of capital within the network of music business in its post-digital era.


2021 ◽  
Vol 20 ◽  
pp. 31-40
Author(s):  
Stanisław Szombara ◽  
Małgorzata Zontek

Augmented Reality (AR) is one of the modern technologies used for sharing 3D geospatial data. This article presents possible ways of enriching a mobile application containing information about 50 objects located in the city of Bielsko-Biała with an AR functionality. The application was created in two programs: Android Studio and Unity. The application allows to get to know historical objects of the city, encourages to visit them by adding virtual elements observed in the background of a real-time camera image from a mobile device. The article presents the statistics of the application usage and the results of a survey conducted among a group of testers. Feedback from application testers confirms the validity of using AR technology in the application. ROZSZERZONA RZECZYWISTOŚĆ W PREZENTACJI ZABYTKÓW MIASTA: APLIKACJA „BIELSKO-BIAŁA PRZEWODNIK AR”, STUDIUM PRZYPADKU Rzeczywistość Rozszerzona (Augmented Reality – AR) jest jedną z nowoczesnych technologii wykorzystywanych do udostępniania danych przestrzennych 3D. W artykule przedstawiono możliwe sposoby wzbogacenia aplikacji mobilnej o funkcjonalność AR. Aplikacja zawiera informacje o 50 obiektach zlokalizowanych na terenie miasta Bielska-Białej i została stworzona w dwóch programach: Android Studio oraz Unity. Aplikacja pozwala na poznanie zabytkowych obiektów miasta oraz zachęca do ich zwiedzania poprzez dodanie wirtualnych elementów obserwowanych w czasie rzeczywistym na tle obrazu z kamery urządzenia mobilnego. W artykule przedstawiono statystyki użytkowania aplikacji oraz wyniki ankiety przeprowadzonej wśród grupy testerów. Informacje zwrotne od testerów aplikacji potwierdzają zasadność zastosowania technologii AR w aplikacji.


2020 ◽  
Vol 5 (1) ◽  
pp. 83-96
Author(s):  
Deepak Chaudhary

This article analyses socioeconomic changes with reference to income, consumption, expenditure, health, and education of migrant households in relation to remittances flows. This study is based on a case study of Musaharniya village in Rajbiraj Municipality of Saptari District, Province 2, Nepal. It is found that remittances play a vital role in improving the socioeconomic condition, reducing poverty and bringing social and political awareness in the village. Those households whose family members are not abroad are poorer than those with migrant members abroad. Due to increasing incomes, their expenditure capacity has considerably risen over time. All migrant households have owned land whereas one-third of households were landless in the past. Access to modern technologies has significantly increased among remittance recipient households compared to non-remittances households. Remittances were also causing migration from rural to urban centres to some extent.


Author(s):  
U. Aebi ◽  
P. Rew ◽  
T.-T. Sun

Various types of intermediate-sized (10-nm) filaments have been found and described in many different cell types during the past few years. Despite the differences in the chemical composition among the different types of filaments, they all yield common structural features: they are usually up to several microns long and have a diameter of 7 to 10 nm; there is evidence that they are made of several 2 to 3.5 nm wide protofilaments which are helically wound around each other; the secondary structure of the polypeptides constituting the filaments is rich in ∞-helix. However a detailed description of their structural organization is lacking to date.


Sign in / Sign up

Export Citation Format

Share Document