scholarly journals Investigation of mixing time in liquid under influence of rotating magnetic field

2017 ◽  
Vol 38 (4) ◽  
pp. 555-565
Author(s):  
Alicja Przybył ◽  
Rafał Rakoczy ◽  
Maciej Konopacki ◽  
Marian Kordas ◽  
Radosław Drozd ◽  
...  

Abstract The aim of the study was to present an experimental investigation of the influence of the RMF on mixing time. The obtained results suggest that the homogenization time for the tested experimental set-up depending on the frequency of the RMF can be worked out by means of the relationship between the dimensionless mixing time number and the Reynolds number. It was shown that the magnetic field can be applied successfully to mixing liquids.

2012 ◽  
Vol 512-515 ◽  
pp. 1455-1458 ◽  
Author(s):  
Xin Zhi He ◽  
De Cai Li ◽  
Hai Na Zhang ◽  
Zhi Li Zhang

In order to meet the requirements of the static seal at large diameter in chemical industry, aerospace industry and military industry, we designed a magnetic fluid static seal at large diameter flange and set up a test rig. We studied the effect of magnetic fluid static seal on the test rig. Finally, we obtained the relationship between the anti-pressure capacity and the number of the seal stages. We also calculated the distribution of the magnetic field in the seal gap and the anti-pressure capacity in theory. The theoretical analysis and the experiment result indicate that the design of the magnetic fluid static seal at large diameter flange is feasible and can be used to meet the practical problems.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Abbas Moghanizadeh ◽  
Fakhreddin Ashrafizadeh ◽  
Jaleh Varshosaz ◽  
Mahshid Kharaziha ◽  
Antoine Ferreira

AbstractArtificial vascular treatment is an emerging interdisciplinary subject of medicine. Although the use of artificial vessels has led to many successful advancements, blood clotting remains a major challenge, especially in terms of mural clots created along the vessel wall that do not completely block the vessel. The main objective of this study is to present a method for declotting artificial vessels. This research introduces a novel thrombectomy technique in artificial vessels by employing nano-magnetic particles under a rotating magnetic field to remove mural clots in artificial vessels. A mathematical model describes the relationship between process parameters. In vitro tests confirm the feasibility of nano-magnetic thrombectomy in cleaning and declotting artificial vessels. The results show that the clot fragments are nano-sized, which eliminates the risk of distal emboli as a concern of using current atherectomy techniques. Meanwhile, no damage to the artificial vessels is observed. The results show that the frequency of rotating the magnetic field has the greatest effect on clot removal. The conceptual principles stated in this study also have the potential to be used in other vascular depositions, such as the accumulation of lipids, and calcification atherosclerosis.


2021 ◽  
pp. 151-151
Author(s):  
Ruihao Zhang ◽  
Sixian Wang ◽  
Shan Qing ◽  
Zhumei Luo ◽  
Zhang Xiaohui

This paper focuses on the convective heat transfer characteristics of Fe3O4 /Water magnetic nanofluids under laminar and turbulent conditions. After verifying the accuracy of the experimental apparatus, the effects of magnetic field strength, concentration, Reynolds number and temperature on the convective heat transfer coefficient have been studied. The convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions were studied in depth, and the influence of each factor on the heat transfer coefficient was analyzed by orthogonal experimental design method. Under the laminar flow conditions, the convective heat transfer of magnetic nanofluids performed best when the Reynolds number was 2000, the magnetic field strength was 600, the temperature was 30? and the concentration was 2%. And the convective heat transfer coefficient (h) increased by 3.96% than the distilled water in the same conditions. In turbulent state, the convective heat transfer of magnetic nanofluids performed the best when the Re was 6000, the magnetic field strength was 600, the temperature was 40? and the concentration was 2%. The h increased by 11.31% than the distilled water in the same Reynolds number and the magnetic field strength conditions.


The distortion of the lines of flow of an electric current in a thin metal plate by the action of a magnetic field was discovered in 1879. Hall attributed this to the action of the magnetic field on the molecular currents in the metal film, which were deflected to one side or the other and accompanied by a corresponding twist of the equipotential lines. This explanation did not pass without criticism, and another theory of the effect found by Hall was published in 1884. In that paper the author seeks to explain the effect by assuming a combination of certain mechanical strains and Peltier effects, a thermo-electric current being set up between the strained and the unstrained portions. The effect of such strain was to produce a reverse effect in some metals, and these were precisely the metals for which the Hall effect was found to reverse. Aluminium was the only exception. In other respects, however, as shown by Hall in a later paper, Bidwell's theory did not stand the test of experiment, and the results lend no support to his theory, while they are in complete accordance withe the explanation that the molecular currents are disturbed by the action of the magnetic field. On the electron theory of metallic conduction, the mechanism of the Hall effect is more obvious, but at present no satisfactory explanation of the reversal found in some metals is known. Further experiments have made it clear that there is a real deflection of the elementary currents, due to the application of the magnetic field, independent of any effect due to strain.


1981 ◽  
Vol 26 (3) ◽  
pp. 465-480 ◽  
Author(s):  
W. N. Hugrass ◽  
I. R. Jones ◽  
M. G. R. Phillips

An investigation of current production by means of a rotating magnetic field is made in an experiment in which the technique is used to generate a theta-pinch- like distribution of field and plasma. Detailed measurements are made of both the generated unidirectional azimuthal electron current and the penetration of the rotating field into the plasma. The experimental results support the theoretical prediction that a threshold value of the amplitude of the applied rotating field exists for setting the electrons into rotation.


2018 ◽  
Vol 185 ◽  
pp. 09006
Author(s):  
Alexander Tyatyushkin

Small steady-state deformational oscillations of a drop of magnetic liquid in a nonstationary uniform magnetic field are theoretically investigated. The drop is suspended in another magnetic liquid immiscible with the former. The Reynolds number is so small that the inertia can be neglected. The variation of the magnetic field is so slow that the quasi-stationary approximation for the magnetic field and the quasi-steady approximation for the flow may be used.


1993 ◽  
Vol 10 (4) ◽  
pp. 275-277
Author(s):  
J.O. Murphy ◽  
J.M. Lopez ◽  
C.P. Dyt

AbstractThe effect of varying magnetic field strength on the frequency of oscillatory motions for cellular multimode magnetoconvection has been investigated. In addition the influence of the thermal, viscous and magnetic diffusivities have been taken into account and the range of preferred horizontal scales established. The relationship between the period of oscillation and the magnetic field strength is determined.


Author(s):  
Kenichi Kamioka ◽  
Ryuichiro Yamane

The experiments are conducted on the magnetic fluid flow induced by the multi-pole rotating magnetic field in a circular cylinder. The numbers of poles are two, four, six, eight and twelve. The applied electric current and frequency are 2∼6 A and 20∼60 Hz, respectively. The peak velocity of the flow increases with the increase in the strength and the phase velocity of the magnetic field. As the increase in the number of poles, the flow shifts to the outer periphery.


2019 ◽  
Vol 2019 ◽  
pp. 1-18
Author(s):  
L. Wang ◽  
Q. M. Ren ◽  
J. C. Han ◽  
Y. D. Zhang

To eliminate the jump points of multipole angle values after subdivision at low temperature, the magnetic field and temperature field characteristics of a multipole magnetic encoder are analyzed in this study, and the effect of changes in magnetic field strength and temperature field on the precision of angle values is studied. To eliminate the jump point of multipole angle values caused by changes in the temperature field, the suppression method based on single-pole angle value fitting is proposed. The error between the single-pole and multipole angle values is tabulated by the oversampling linear interpolation method, and the precision of fitting single-pole to multipole angle values is effectively improved. The error of the angle value caused by changes in the temperature field is studied and analyzed, and the relationship between the jump angle values and the pole number of the multipole magnetic encoder is obtained. Furthermore, the jump point is compensated for by the jump range of the multipole angle values. Finally, the angle accuracy of the multipole magnetic encoder in a cryogenic chamber is experimentally verified. The experimental results show that the low-temperature jump point compensation method proposed for the multipole magnetic encoder in this paper can effectively suppress the jump of the angle values.


Sign in / Sign up

Export Citation Format

Share Document