Efficient Nonlinear Energy Harvesting with Wrinkled Piezoelectric Membranes

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
Igor Neri ◽  
Miquel López-Suárez
Keyword(s):  
Power Density ◽  
Mechanical Response ◽  
Excitation Amplitude ◽  
Electric Response ◽  
Noise Power ◽  
External Excitation ◽  
Piezoelectric Energy ◽  
Nonlinear Mechanical ◽  
Nonlinear Regimes ◽  
Nonlinear Energy

AbstractWe investigate the performance of a piezoelectric energy harvester with nonlinearity induced by wrinkles. Linear and nonlinear regimes are detected in the electric response of the device when sweeping the intensity of the external excitation. Those regimes are related to the activation of a nonlinear mechanical response that appears when increasing the excitation amplitude. The wrinkles have been found to improve the power density and the normalized power density, in a certain noise power range.

scholarly journals Comprehensive Review on Effective Strategies and Key Factors for High Performance Piezoelectric Energy Harvester at Low Frequency

2019 ◽  
Vol 16 (4) ◽  
pp. 7181-7210 ◽  
Author(s):  
N. H. H. A. Talib ◽  
H. Salleh ◽  
B. D. Youn ◽  
M. S. M. Resali
Keyword(s):  
Power Density ◽  
Output Power ◽  
High Performance ◽  
Energy Harvester ◽  
Material Selection ◽  
Rapid Development ◽  
Low Frequency ◽  
Excitation Amplitude ◽  
Piezoelectric Energy ◽  
Limited Application

In the past decade, there has been rapid development in piezoelectric energy harvester due to its limited application and low output power. This paper critically reviews the strategies implemented to improve the power density for low-frequency applications. These strategies include piezoelectric material selection as well as optimisations of shape, size and structure. The review also focuses on the recent advances in multi-modal, nonlinear and multi-directional energy harvesting. Based on the comprehensive summary of the normalised power density at 1g acceleration, it was found that most works fell in the second quadrant of low frequency and high power density. The maximum value was around 1mW/mm3 /g. Adding an extension of beam or spring to the conventional piezoelectric beam could enhance the normalised power density dramatically. Additionally, the multi-modal energy harvester exhibits broader bandwidth when its multiple resonance peaks get closer. The findings indicate that the anticipated performance of a piezoelectric harvester can be attained by achieving the trade-off between output power and bandwidth. To achieve high performance at low frequency, the following factors are essential: excellent material characteristics optimised geometry for high strain energy density, excellent flexibility, high excitation amplitude and broad bandwidth. 

scholarly journals Power Density Improvement of Piezoelectric Energy Harvesters via a Novel Hybridization Scheme with Electromagnetic Transduction

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 803
Author(s):  
Zhongjie Li ◽  
Chuanfu Xin ◽  
Yan Peng ◽  
Min Wang ◽  
Jun Luo ◽  
...  
Keyword(s):  
Power Density ◽  
Output Power ◽  
Energy Harvester ◽  
Hybrid Energy ◽  
Energy Harvesters ◽  
Piezoelectric Patch ◽  
Piezoelectric Energy ◽  
Electromagnetic Transduction ◽  
Self Powered ◽  
Power Densities

A novel hybridization scheme is proposed with electromagnetic transduction to improve the power density of piezoelectric energy harvester (PEH) in this paper. Based on the basic cantilever piezoelectric energy harvester (BC-PEH) composed of a mass block, a piezoelectric patch, and a cantilever beam, we replaced the mass block by a magnet array and added a coil array to form the hybrid energy harvester. To enhance the output power of the electromagnetic energy harvester (EMEH), we utilized an alternating magnet array. Then, to compare the power density of the hybrid harvester and BC-PEH, the experiments of output power were conducted. According to the experimental results, the power densities of the hybrid harvester and BC-PEH are, respectively, 3.53 mW/cm3 and 5.14 μW/cm3 under the conditions of 18.6 Hz and 0.3 g. Therefore, the power density of the hybrid harvester is 686 times as high as that of the BC-PEH, which verified the power density improvement of PEH via a hybridization scheme with EMEH. Additionally, the hybrid harvester exhibits better performance for charging capacitors, such as charging a 2.2 mF capacitor to 8 V within 17 s. It is of great significance to further develop self-powered devices.

The effects of nonlinear energy sink and piezoelectric energy harvester on aeroelastic instability of an airfoil

2021 ◽  
pp. 107754632199358
Author(s):  
Ali Fasihi ◽  
Majid Shahgholi ◽  
Saeed Ghahremani
Keyword(s):  
Energy Harvester ◽  
Equations Of Motion ◽  
Continuation Method ◽  
Dynamical Behavior ◽  
Harmonic Balance Method ◽  
Nonlinear Energy Sink ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Two Degree Of Freedom ◽  
Nonlinear Energy

The potential of absorbing and harvesting energy from a two-degree-of-freedom airfoil using an attachment of a nonlinear energy sink and a piezoelectric energy harvester is investigated. The equations of motion of the airfoil coupled with the attachment are solved using the harmonic balance method. Solutions obtained by this method are compared to the numerical ones of the pseudo-arclength continuation method. The effects of parameters of the integrated nonlinear energy sink-piezoelectric attachment, namely, the attachment location, nonlinear energy sink mass, nonlinear energy sink damping, and nonlinear energy sink stiffness on the dynamical behavior of the airfoil system are studied for both subcritical and supercritical Hopf bifurcation cases. Analyses demonstrate that absorbing vibration and harvesting energy are profoundly affected by the nonlinear energy sink parameters and the location of the attachment.

Modeling and Experimental Validations of a Piezoelectric Energy Harvester Under Combined Galloping and Base Excitations

2014 ◽  
Author(s):  
Amin Bibo ◽  
Abdessattar Abdelkefi ◽  
Mohammed F. Daqaq
Keyword(s):  
Bluff Body ◽  
Energy Harvester ◽  
Constitutive Relations ◽  
Excitation Frequency ◽  
Primary Resonance ◽  
Beam Theory ◽  
Excitation Amplitude ◽  
The Body ◽  
Base Excitation ◽  
Piezoelectric Energy

This paper develops an experimentally validated model of a piezoelectric energy harvester under combined aeroelastic-galloping and base excitations. To that end, an energy harvester consisting of a thin piezoelectric cantilever beam subjected to vibratory base excitation is considered. To permit galloping excitation, a bluff body is rigidly attached at the free end such that a net aerodynamic lift is generated as the incoming airflow separates on both sides of the body giving rise to limit cycle oscillations when the flow velocity exceeds a critical value. A nonlinear electromechanical distributed-parameter model of the harvester under the combined excitation is derived using the energy approach and by adopting the nonlinear Euler-Bernoulli beam theory, linear constitutive relations for the piezoelectric transduction, and the quasi-steady assumption for the aerodynamic loading. The partial differential equations of the system are discretized and a reduced-order-model is obtained. The mathematical model is validated by conducting a series of experiments with different loading conditions represented by wind speed, base excitation amplitude, and excitation frequency around the primary resonance.

Research on a high power density mechanical-electrical-hydraulic regenerative suspension system for high-speed tracked vehicles

2021 ◽  
pp. 095440702110610
Author(s):  
Chao Wang ◽  
Weijie Zhang ◽  
Guosheng Wang ◽  
Yong Guo
Keyword(s):  
Power Density ◽  
High Power ◽  
High Speed ◽  
Excitation Amplitude ◽  
Suspension System ◽  
Level Energy ◽  
High Power Density ◽  
Damping Force ◽  
Tracked Vehicles ◽  
Energy Regeneration

High power density energy regeneration is one of the effective solutions to solve the contradiction between improving the damping performance and energy consumption of active suspension. The hydraulic commutator is used to realize hydraulic rectification and hydraulic variable speed/pump/motor with few teeth difference gear pairs is used to match the speed, combined with permanent magnet motor power generation and power supply to put forward kilowatt level high power density mechanical-electrical-hydraulic regenerative suspension system for high-speed tracked vehicles. The mathematical model and fluid-solid-thermo-magnetic multiphysics coupling model are built to analyze the damping performance and regenerative characteristics of the system under passive and semi-active working conditions. The simulation results show that the damping force of the system increases with the increase of the road excitation amplitude and the semi-active control can be realized by adjusting the duty cycle with the PWM control rectifier module. The high power density mechanical-electrical-hydraulic regenerative suspension system can realize kilowatt level energy regeneration, and the regenerative efficiency is more than 50% under low-frequency excitation. The temperature rise of the system is low during operation, which is helpful to improve the reliability and service life.

Novel Soft Materials with Nonlinear Mechanical Response

2021 ◽  
Vol MA2021-02 (55) ◽  
pp. 1591-1591
Author(s):  
Takanori Sato ◽  
Yosuke Watanabe ◽  
Nahin Islam Shiblee ◽  
Ajit Khosla ◽  
Jun Ogawa ◽  
...  
Keyword(s):  
Mechanical Response ◽  
Soft Materials ◽  
Nonlinear Mechanical

scholarly journals On the Effects of Structural Coupling on Piezoelectric Energy Harvesting Systems Subject to Random Base Excitation

Aerospace ◽  
2020 ◽  
Vol 7 (7) ◽  
pp. 93
Author(s):  
Hamidreza Masoumi ◽  
Hamid Moeenfard ◽  
Hamed Haddad Khodaparast ◽  
Michael I. Friswell
Keyword(s):  
Energy Harvesting ◽  
Mechanical Response ◽  
Harmonic Excitation ◽  
Point Of View ◽  
Analytical Models ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Novel Approach ◽  
Band Limited ◽  
Multi Body

The current research investigates the novel approach of coupling separate energy harvesters in order to scavenge more power from a stochastic point of view. To this end, a multi-body system composed of two cantilever harvesters with two identical piezoelectric patches is considered. The beams are interconnected through a linear spring. Assuming a stochastic band limited white noise excitation of the base, the statistical properties of the mechanical response and those of the generated voltages are derived in closed form. Moreover, analytical models are derived for the expected value of the total harvested energy. In order to maximize the expected generated power, an optimization is performed to determine the optimum physical and geometrical characteristics of the system. It is observed that by properly tuning the harvester parameters, the energy harvesting performance of the structure is remarkably improved. Furthermore, using an optimized energy harvester model, this study shows that the coupling of the beams negatively affects the scavenged power, contrary to the effect previously demonstrated for harvesters under harmonic excitation. The qualitative and quantitative knowledge resulting from this analysis can be effectively employed for the realistic design and modelling of coupled multi-body structures under stochastic excitations.

Integration of a nonlinear energy sink and a piezoelectric energy harvester

2017 ◽  
Vol 38 (7) ◽  
pp. 1019-1030 ◽  
Author(s):  
Xiang Li ◽  
Yewei Zhang ◽  
Hu Ding ◽  
Liqun Chen
Keyword(s):  
Energy Harvester ◽  
Nonlinear Energy Sink ◽  
Piezoelectric Energy ◽  
Energy Sink ◽  
Nonlinear Energy

Experimental and Numerical Assessment of Both Slug and Vortex Induced Vibrations on a Spool Model

2020 ◽  
Author(s):  
Matthieu Minguez ◽  
Kevin Le Prin ◽  
Alain Liné ◽  
Vincent Lafon ◽  
François Pétrié ◽  
...  
Keyword(s):  
Slug Flow ◽  
Mechanical Response ◽  
Numerical Models ◽  
Induced Response ◽  
Flow Properties ◽  
External Excitation ◽  
Mechanical Responses ◽  
Vortex Induced Vibrations ◽  
Numerical Assessment ◽  
Slug Flows

Abstract The paper addresses the flow-induced response of a rigid spool/jumper. It mainly focuses on its mechanical response resulting from internal intermittent slug flows but also addresses potential coupling with an external excitation due to vortex shedding. These works provide quantitative experimental data that match quite well with existing empirical correlations in terms of slug flow properties. The repeatability of the measurement system has been experienced and underlines promising capabilities. The tests provide exhaustive complementary data regarding the slug flow properties (e.g. pocket length) which will be reused for numerical modelling purpose. The mechanical response of the spool is exhaustively addressed for different regular slug flows. Some correlations are proposed aiming at describing the mechanical responses. The coupling with an additional external current solicitation and Vortex Induced Vibrations (VIV) is discussed and characterized for some conditions. Finally, a discussion on the current Industry Best Practices is introduced in order to challenge the capability of the proposed approaches to described and recover such complex phenomenon. The comparisons underline the weak agreement between experiments and numerical models, opening discussion on the best way to address this physics and the next developments.

Sign in / Sign up

Export Citation Format

Share Document