Sodium alginate nanoparticles as a new transdermal vehicle of glucosamine sulfate for treatment of osteoarthritis

2017 ◽  
Vol 9 (3-4) ◽  
Author(s):  
Asmaa S. El-Houssiny ◽  
Azza A. Ward ◽  
Dina M. Mostafa ◽  
Salwa L. Abd-El-Messieh ◽  
Kamal N. Abdel-Nour ◽  
...  
Keyword(s):  
Side Effects ◽  
Surface Charge ◽  
Ex Vivo ◽  
In Vitro Release ◽  
Glucosamine Sulfate ◽  
Suspension Stability ◽  
Rat Skin ◽  
Release Studies ◽  
Vitro Release

AbstractGlucosamine sulfate (GS) has been used orally for the treatment of osteoarthritis (OA). However, it may be susceptible to the liver first pass phenomenon, which greatly affects its bioavailability, in addition to its side effects on the gastrointestinal tract. Alginate nanoparticles (Alg NPs) were investigated as a new drug carrier for transdermal delivery of GS to improve its effectiveness and reduce side effects. GS-Alg NPs were characterized by encapsulation efficiency, NP yield, particle size and surface charge properties. The in vitro release studies of GS and the ex vivo permeability through rat skin were determined using a UV-Vis spectrophotometer. GS-Alg NPs are within the nanometer range of size. High negative surface charge values are obtained and indicate the high suspension stability of the prepared formulation. The in vitro release studies showed that GS is released from Alg NPs in a sustained and prolonged manner. The ex vivo permeability of GS through rat skin is enhanced significantly after encapsulation in the negatively charged Alg NPs. We successfully reported a highly stable nanoparticlulate system using Alg NPs that permits the encapsulation of GS for topical administration, overcoming the disadvantages of oral administration.

Improved in vitro Release and ex vivo Permeation of Zotepine as Microemulsion Gel Formulation through Transdermal Application

2021 ◽  
Vol 14 (1) ◽  
pp. 5343-5352
Author(s):  
Akhila Keshoju ◽  
Dinesh Suram ◽  
Chandra Mouli Golla ◽  
Nagaraj B
Keyword(s):  
Ex Vivo ◽  
In Vitro Release ◽  
Gelling Agent ◽  
Prolonged Release ◽  
Rat Skin ◽  
Skin Delivery ◽  
Ex Vivo Permeation ◽  
Vitro Release ◽  
Microemulsion Gel

Zotepine is atypical antipsychotic drug with poor oral bioavailability due to first-pass metabolism and poor aqueous solubility. The objective of the current investigation was preparation and ex vivo characterization of Zotepine (ZT) loaded microemulsion (ZT-ME) and microemulsion gel (ZT-MEG) for enhanced transdermal delivery.  ZT-ME formulation was prepared with 7.5% oleic acid, 30% w/v of Tween80 and 30%w/v of absolute ethanol as oil, surfactant and cosurfactant, respectively. Optimized ZT-ME formulation was selected and converted to ZT-MEG using carbopol as gelling agent. ZT-ME and ZT-MEG subjected to in vitro release and ex vivo permeation studies through rat skin, comparison with ZT coarse suspension (ZT-CS). ZT-ME formulation showed desirable physicochemical properties and stable with dilution stress. Prepared ZT-MEG formulation has showed better rheological behaviour and good spreadability. ZT-ME and ZT-MEG showed prolonged release compared with ZT-CS formulation over 24 h. ZT-ME and ZT-MEG exhibited 5-folds and 3.5-folds in permeation through rat skin compared with ZT-CS formulation. Overall, ZT-MEG formulation could be considered as an alternative delivery approach for enhanced skin delivery. 

scholarly journals SELF-ASSEMBLED CHITOSAN NANOPARTICLES FOR PERCUTANEOUS DELIVERY OF CAFFEINE: PREPARATION, CHARACTERIZATION AND IN VITRO RELEASE STUDIES

2018 ◽  
Vol 10 (4) ◽  
pp. 172 ◽  
Author(s):  
Nik Amanina Farhanah Abu Hassan ◽  
Shariza Sahudin ◽  
Zahid Hussain ◽  
Mumtaz Hussain ◽  
Mumtaz Hussain
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Zeta Potential ◽  
Surface Charge ◽  
Process Parameters ◽  
In Vitro Release ◽  
Freeze Dried ◽  
Release Studies ◽  
Vitro Release

Objective: Chitosan (CS)–tripolyphosphate (TPP)–nanoparticles (NPs) have been extensively studied during the past few decades due to their well-recognized applicability in various fields. The present study attempts to optimise the development of these nanoparticles to enhance the percutaneous delivery of caffeine.Methods: CS-TPP-NPs were prepared via ionic cross-linking of CS and TPP and were characterized. The influence of several formulation conditions (CS: TPP mass ratio and concentration of caffeine) and process parameters (stirring speed, stirring time and ultra-sonication time) on the colloidal characteristics of CS-TPP-NPs were investigated and the resulting nanoparticles were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and x-ray diffraction (XRD) analyses. Physicochemical properties, including particle size, zeta potential and polydispersity index (PDI) were examined, and in vitro release studies were conducted to ascertain the release profile of caffeine from the nanoparticles. In addition, the colloidal stability of the prepared NPs was also assessed on storage.Results: Process parameters appeared to exert a significant effect on the physicochemical characteristics of the CS-TPP-NPs. The CS-TPP-NPs prepared under optimum conditions (CS concentration of 0.2 mg/ml, CS: TPP volume ratio of 25:12 ml, stirred at 700 rpm for 60 min, with 0.97 mg/ml caffeine concentration and treatment with low ultra-sonication for 30 min) had shown a mean particle size of ~143.43±1.69 nm, zeta potential of+43.13±1.10 mV, PDI of ~0.30±0.01. A drug loading capacity and encapsulation efficiency of 48.89% and 60.69%, respectively, were obtained. Cumulative release study for drug-loaded CS-NPs was significantly (p<0.001, paired t-test) higher (58.7% caffeine released) compared to control formulation (41.5% caffeine released) after 72 h. Stability studies conducted for 28 d showed that caffeine-loaded CS-NPs degraded much quicker when stored at 25 ⁰C than 4 ⁰C. It was also noted that caffeine-loaded CS-NPs in the freeze-dried form were unstable as the surface charge of nanoparticles dropped from positive zeta potential to-3.55 mV within 2 d at 4 ⁰C and at 25 ⁰C, surface charge dropped to-3.16 mV within 14 d of the experiment.Conclusion: Chitosan (CS)–tripolyphosphate (TPP)–nanoparticles (NPs) appear to be a promising strategy to achieve sustained percutaneous delivery of caffeine.

scholarly journals Development of Tizanidine HCl transdermal patches: In-vitro and Ex-vivo characterization

2019 ◽  
Vol 9 (1-s) ◽  
pp. 295-300
Author(s):  
Dr. Shayeda ◽  
Nusrat Ayesha
Keyword(s):  
Ex Vivo ◽  
In Vitro Release ◽  
Content Uniformity ◽  
Transdermal Patches ◽  
Ex Vivo Permeation ◽  
Release Studies ◽  
Transdermal Drug Delivery Systems ◽  
Folding Endurance ◽  
Vitro Release

The purpose of this work was to design and evaluate matrix type transdermal patches of Tizanidine hydrochloride using Hypromellose (HPMC E15) as polymer, dibutyl phthalate as plasticizer and citral as permeation enhancer. The DSC and FTIR results showed the compatibility of the excipients with the drug. These transdermal drug delivery systems were characterized for their thickness, folding endurance, content uniformity, tensile strength and in-vitro release studies of the drug from the polymeric matrix. In-vitro release studies and ex-vivo permeation were carried out with modified Franz diffusion cell using pH 5.8 & pH 7.4 phosphate buffers as receptor medium and it showed controlled release of drug. The results suggest that the formulation of TIZ may be useful in the development of a therapeutic system to deliver TIZ across the skin for a prolonged period, i.e. 24 hr. Keywords: Tizanidine Hydrochloride, Transdermal patch, HPMC E15, in-vitro & ex-vivo.

Preparation and in vitro Evaluation of Bioadhesive Microparticulate System

1970 ◽  
Vol 1 (3) ◽  
pp. 257-266
Author(s):  
Nagda C. D. ◽  
Chotai N. P. ◽  
Patel S. B. ◽  
Soni T. J ◽  
Patel U. L
Keyword(s):  
Drug Loading ◽  
In Vitro Release ◽  
Phenyl Acetic Acid ◽  
Solvent Evaporation Method ◽  
Elimination Half ◽  
Release Studies ◽  
Differential Scanning Colorimetry ◽  
Polymer Interactions ◽  
Vitro Release

Aceclofenac (ACE) is NSAIDs of a phenyl acetic acid class. It is indicated in arthritis and osteoarthritis, rheumatoid arthritis, ankylosing spondylitis. It has short elimination half life of 4 hours. The objective of the study is to design, characterize and evaluate bioadhesive microspheres of ACE employing carbopol (CP) as bioadhesive polymer. Bioadhesive microspheres of ACE were prepared by solvent evaporation method. The prepared microspheres were free flowing and spherical in shape and characterized for drug loading, mucoadhesion test, infrared spectroscopy (IR), differential scanning colorimetry (DSC) and scanning electron microscopy (SEM). The in-vitro release studies were performed using pH 6.8 phosphate buffer. The drug loaded microspheres in a ratio of 1:5 showed 47% of drug entrapment; percentage mucoadhesion was 81% and 89% release in 10 h. The infrared spectra and DSC showed stable character of aceclofenac in the drug loaded microspheres and revealed the absence of drug-polymer interactions. SEM studies showed that the microspheres are spherical and porous in nature. The in vitro release profiles from microspheres of different polymer-drug ratios followed Higuchi model.

Enhanced Oral Absorption of All-trans Retinoic Acid upon Encapsulation in Solid Lipid Nanoparticles

2020 ◽  
Vol 8 (6) ◽  
pp. 495-510
Author(s):  
Manoj Kumar ◽  
Garima Sharma ◽  
Dinesh Singla ◽  
Sukhjeet Singh ◽  
Vandita Kakkar ◽  
...  
Keyword(s):  
Retinoic Acid ◽  
Side Effects ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Solid Lipid ◽  
Trans Retinoic Acid ◽  
All Trans Retinoic Acid ◽  
Vitro Release

Background:: All-trans retinoic acid (ATRA) is widely employed in the treatment of various proliferative and inflammatory diseases. However, its therapeutic efficacy is imperiled due to its poor solubility and stability. Latter was surmounted by its incorporation into a solid matrix of lipidic nanoparticles (SLNs). Methods:: ATRA loaded SLNs (ATRA-SLNs) were prepared using a novel microemulsification technique (USPTO 9907758) and an optimal composition and were characterized in terms of morphology, differential scanning calorimetry (DSC), and powder X-ray diffraction studies (PXRD). In vitro release, oral plasma pharmacokinetics (in rats) and stability studies were also done. Results:: Rod-shaped ATRA-SLNs could successfully incorporate 3.7 mg/mL of ATRA, increasing its solubility (from 4.7 μg/mL) by 787 times, having an average particle size of 131.30 ± 5.0 nm and polydispersibility of 0.283. PXRD, DSC, and FTIR studies confirmed the formation of SLNs. Assay/total drug content and entrapment efficiency of ATRA-SLNs was 92.50 ± 2.10% and 84.60 ± 3.20% (n=6), respectively, which was maintained even on storage for one year under refrigerated conditions as an aqueous dispersion. In vitro release in 0.01 M phosphate buffer (pH 7.4) with 3% tween 80 was extended 12 times from 2h for free ATRA to 24 h for ATRA-SLNs depicting Korsmeyer Peppas release. Oral administration in rats showed 35.03 times enhanced bioavailability for ATRA-SLNs. Conclusion:: Present work reports preparation and evaluation of bioenhanced ATRA-SLNs containing a high concentration of ATRA (>15 times than that reported by others). Latter is attributed to the novel preparation process and intelligent selection of components. Lay Summary: All-trans retinoic acid (ATRA) shows an array of pharmacological activities but its efficacy is limited due to poor solubility, stability and side effects. In present study its solubility and efficacy is improved by 787 and 35.5 times, respectively upon incorporation into solid lipid nanoparticles (ATRA-SLNs). Latter extended its release by 12 times and provided stability for at least a year under refrigeration. A controlled and sustained release will reduce dose related side effects. ATRA-SLNs reported presently can thus be used in treatment /prophylaxis of disorders like cancers, tuberculosis, age related macular degeneration and acne and as an immune-booster.

scholarly journals Development of nitazoxanide-loaded colon-targeted formulation for intestinal parasitic infections: centre composite design-based optimization and characterization

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Charu Bharti ◽  
Upendra Nagaich ◽  
Jaya Pandey ◽  
Suman Jain ◽  
Neha Jain
Keyword(s):  
Particle Size ◽  
Desirability Function ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
Percentage Yield ◽  
Vitro Release ◽  
Selection Of

Abstract Background The current investigation is focused on the development and characterization of Eudragit S100 coated nitazoxanide-loaded microbeads as colon-targeted system utilizing central composite design (CCD) and desirability function. The study initiated with the selection of a BCS class II drug nitazoxanide and its preformulation screening with excipients, selection of polymer and identification of concentration for CCD, selection of optimized formulation based on desirability function, and in vitro release studies in simulated gastric and colonic media and stability studies. A two-factor, three-level CCD was employed with two independent variables, i.e. X1 (chitosan % w/v) and X2 (sodium tripolyphosphate % w/v), and three dependent variables, i.e. Y1 (particle size in micrometres), Y2 (percentage yield) and Y3 (percent entrapment efficiency), were chosen. Additionally, surface morphology, mucoadhesion and in vitro drug release studies were also conducted. Result Chitosan concentration showing maximum entrapment and optimum particle size was selected to formulate chitosan beads. The polynomial equation and model graphs obtained from the Design-Expert were utilized to examine the effect of independent variables on responses. The effect of formulation composition was found to be significant (p ˂ 0.05). Based on the desirability function, the optimized formulation was found to have 910.14 μm ± 1.03 particle size, 91.84% ± 0.64 percentage yield and 84.75% ± 0.38 entrapment efficiency with a desirability of 0.961. Furthermore, the formulations were characterized for in vitro drug release in simulated colonic media (2% rat caecal content) and have shown a sustained release of ∼ 92% up to 24 h as compared to in vitro release in simulated gastric fluid. Conclusion The possibility of formulation in enhancing percentage yield and entrapment efficiency of nitazoxanide and the utilization of CCD helps to effectively integrate nitazoxanide microbeads into a potential pharmaceutical dosage form for sustained release.

Synthesis, characterization and in vitro release studies of a new acetazolamide–HP-β-CD–TEA inclusion complex

2008 ◽  
Vol 43 (3) ◽  
pp. 464-470 ◽  
Author(s):  
Gladys E. Granero ◽  
Marcos M. Maitre ◽  
Claudia Garnero ◽  
Marcela R. Longhi
Keyword(s):  
Inclusion Complex ◽  
In Vitro Release ◽  
Release Studies ◽  
Vitro Release

scholarly journals In vitro Release Kinetics Study of Ranolazine from Swellable Hydrophilic Matrix Tablets

1970 ◽  
Vol 8 (1) ◽  
pp. 31-38 ◽  
Author(s):  
Mohammad Nezab Uddin ◽  
Ishtiaq Ahmed ◽  
Monzurul Amin Roni ◽  
Muhammad Rashedul Islam ◽  
Mohammad Habibur Rahman ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
High Viscosity ◽  
Matrix Tablets ◽  
Release Studies ◽  
The Matrix ◽  
Vitro Release

The objective of this study was to design oral sustained release matrix tablets of Ranolazine usinghydroxypropyl methylcellulose (HPMC) as the retardant polymer and to study the effect of formulation factors suchas polymer proportion and polymer viscosity on the release of drug. In vitro release studies were performed usingUSP type II apparatus (paddle method) in 900 mL of 0.1N HCl at 100 rpm for 12 hours. The release kinetics wasanalyzed using the zero-order, first order, Higuchi and Korsmeyer-Peppas equations to explore and explain themechanism of drug release from the matrix tablets. In vitro release studies revealed that the release rate decreasedwith increase in polymer proportion and viscosity grade. Mathematical analysis of the release kinetics indicated thatthe nature of drug release from the matrix tablets was dependent on drug diffusion and polymer relaxation andtherefore followed non-Fickian or anomalous release. The developed controlled release matrix tablets of Ranolazineprepared with high viscosity HPMC extended release up to 12 hours.Key words: Ranolazine; Sustained release; Methocel E50 Premium LV; Methocel K100LV CR; Methocel K4M CR;Methocel K15M CR.DOI: 10.3329/dujps.v8i1.5333Dhaka Univ. J. Pharm. Sci. 8(1): 31-38, 2009 (June)

Sign in / Sign up

Export Citation Format

Share Document