Compact super-wideband MIMO antenna with improved isolation for wireless communications

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajit Kumar Singh ◽  
Santosh Kumar Mahto ◽  
Rashmi Sinha
Keyword(s):  
Frequency Band ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Dielectric Substrate ◽  
Center Frequency ◽  
Isolation Technique ◽  
Mimo Antenna ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output

Abstract This paper presents a miniaturized dual-element Super-Wideband (SWB) Multiple-Input-Multiple-Output (MIMO) antenna. The operation bandwidth is enhanced by 175% with a Bandwidth Dimension Ratio (BDR) of 6960, using a tapered microstrip line and employing an improved isolation technique. An inverted T-slot is used in the partial ground plane of the antenna. Isolation is increased up to 25 dB over the operating band (1.6–24.5 GHz) by using a pair of T-shaped stubs and a rectangular strip between them. A detailed analysis of the parameters Envelope Correlation Coefficient (ECC), Diversity Gain (DG), Mean Effective Gain (MEG), Total Active Reflection Coefficient (TARC), isolation between the ports, and Channel Capacity Loss (CCL) is undertaken to investigate the performance of proposed SWB MIMO antenna. A prototype of the proposed design is developed by fabricating on the FR–4 (loss tangent 0.02) dielectric substrate of electrical dimension 0.18λ 0 × 0.14λ 0. The measured parameters are in good agreement with the simulated ones. The proposed antenna focusses on 2.4–2.483 GHz frequency band (Bluetooth) and 3.4–3.6 GHz frequency band with a center frequency of 3.5 GHz (as part of the sub 6 GHz 5G band).

A miniaturized UWB-MIMO antenna with quadruple band-notched characteristics

2018 ◽  
Vol 10 (8) ◽  
pp. 948-955 ◽  
Author(s):  
Ling Wu ◽  
Yingqing Xia ◽  
Xia Cao ◽  
Zhengtao Xu
Keyword(s):  
Frequency Band ◽  
Satellite Communication ◽  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Ultra Wideband ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Uwb Applications

AbstractA simple multiple-input-multiple-output (MIMO) antenna with quad-band-notched characteristics for ultra-wideband (UWB) system is proposed and tested in the article. Based on two similar radiators, the UWB-MIMO system only occupies 22 mm × 28 mm. By etching an inverted L-like meander slot, two inverted L-shaped slots, and adding a C-shaped stub beside the feeding line, four notched bands are realized (3.25–3.6, 5.05–5.48, 5.6–6, and 7.8–8.4 GHz) to suppress interference from WiMAX, lower WLAN, upper WLAN, and uplink of X-band satellite communication system. With a T-like stub extruding from the ground plane, port isolation is effectively improved. The results show that the antenna covers 3.1–10.6 GHz UWB frequency band except four rejected bands and has high isolation of better than −20 dB over most of the frequency band. Moreover, envelope correlation coefficient and good radiation patterns also prove that the introduced antenna is suitable for UWB applications.

scholarly journals Transparent 2-Element 5G MIMO Antenna for Sub-6 GHz Applications

Electronics ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 251
Author(s):  
Arpan Desai ◽  
Merih Palandoken ◽  
Issa Elfergani ◽  
Ismail Akdag ◽  
Chemseddine Zebiri ◽  
...  
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Transparent Conductive Oxide ◽  
Site Location ◽  
Mimo Antenna ◽  
High Frequency Structure Simulator ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Iot Devices

A dual-port transparent multiple-input multiple-output (MIMO) antenna resonating at sub-6 GHz 5G band is proposed by using patch/ground material as transparent conductive oxide (AgHT-8) and a transparent Plexiglas substrate. Two identical circular-shaped radiating elements fed by using a microstrip feedline are designed using the finite element method (FEM) based high-frequency structure simulator (HFSS) software. The effect of the isolation mechanism is discussed using two cases. In case 1, the two horizontally positioned elements are oriented in a similar direction with a separate ground plane, whereas in case 2, the elements are vertically placed facing opposite to each other with an allied ground. In both cases, the transparent antennas span over a −10 dB band of 4.65 to 4.97 GHz (300 MHz) with isolation greater than 15 dB among two elements. The diversity parameters are also analyzed for both the cases covering the correlation coefficient (ECC), mean effective gain (MEG), diversity gain (DG), and channel capacity loss (CCL). The average gain and efficiency above 1 dBi and 45%, respectively with satisfactory MIMO diversity performance, makes the transparent MIMO antenna an appropriate choice for smart IoT devices working in the sub-6 GHz 5G band by mitigating the co-site location and visual clutter issues.

scholarly journals High-Isolation UWB MIMO Antenna with Multiple X-Shaped Stubs Loaded between Ground Planes

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Minghuan Wang ◽  
Jingchang Nan ◽  
Jing Liu
Keyword(s):  
Frequency Band ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Antenna Structure ◽  
Mimo Antenna ◽  
High Isolation ◽  
Input Multiple Output

A miniaturized ultra-wideband multiple-input multiple-output (UWB MIMO) two-port antenna with high isolation based on FR4 is designed in this article. The size of the antenna is only 18 × 28 × 1.6 mm3. The MIMO antenna consists of two identical antenna elements symmetrically placed on the same dielectric substrate in opposite directions. By loading three crossed X-shaped stubs between two unconnected ground planes, high isolation and good impedance matching are achieved. The working frequency band measured by this UWB MIMO antenna is 1.9–14 GHz, and the isolation is kept above 20.2 dB in the whole analysis frequency band. Good radiation characteristics as well as envelope correlation coefficient (ECC, <0.09), mean effective gain (MEG), and channel capacity loss (CCL) in the passband meet the requirements of the application, which can be applied to the UWB wireless communication system. To verify the applicability of the proposed method for enhancing the isolation between antenna elements, the two-port antenna structure was extended to a four-port antenna structure. In the case of loading the X-shaped stubs to connect to the ground plane, the isolation of the antenna is maintained above 15.5 dB within 1.7–14 GHz.

scholarly journals Design of Quad-Port Ultra-Wideband Multiple-Input-Multiple-Output Antenna with Wide Axial-Ratio Bandwidth

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1174 ◽  
Author(s):  
Pawan Kumar ◽  
Shabana Urooj ◽  
Areej Malibari
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Agreement

This article presents a compact, planar, quad-port ultra-wideband (UWB) multiple-input–multiple-output (MIMO) antenna with wide axial ratio bandwidth (ARBW). The proposed MIMO design consists of four identical square-shaped antenna elements, where each element is made up of a circular slotted ground plane and feed by a 50 Ω microstrip line. The circular polarization is achieved using a protruding hexagonal stub from the ground plane. The four elements of the MIMO antenna are placed orthogonally to each other to obtain high inter-element isolation. FR-4 dielectric substrate of size 45 × 45 × 1.6 mm3 is used for the antenna prototype, and a good agreement is noticed among the simulated and experimental results. The proposed MIMO antenna shows 3-dB ARBW of 52% (3.8–6.5 GHz) and impedance bandwidth (S11 ≤ −10 dB) of 144% (2.2–13.5 GHz).

scholarly journals A Quad-Element UWB-MIMO Antenna with Band-Notch and Reduced Mutual Coupling Based on EBG Structures

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Wenjing Wu ◽  
Bo Yuan ◽  
Aiting Wu
Keyword(s):  
Mimo System ◽  
Electromagnetic Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Dielectric Substrate ◽  
Portable Devices ◽  
Mimo Antenna ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact planar quad-element ultrawideband (UWB) antenna with a band-notch and low coupling for multiple-input multiple-output (MIMO) system is proposed in this paper. The antenna consists of four circular monopoles with modified defected ground plane and a periodic electromagnetic band gap (EBG) structures. The proposed EBG structures are modified from the traditional mushroom-like ones, comprised of patterns of grids on the top patch, the metallic ground plane, and several vias that connect the top and bottom plane. It is printed at the center of the dielectric substrate to lower electromagnetic coupling between the parallel elements. Besides, by etching four crescent ring-shaped resonant slots on the radiators, a sharp band-notched characteristic is achieved. From the experimental results, the −10 dB bandwidth of the antenna is extended covers from 3.0 to 16.2 GHz, with a sharp notched band at 4.6 GHz. And the isolation is greater than 17.5 dB between its elements, with a peak gain of 8.4 dB and a peak efficiency of 91.2%. Moreover, it has a compact size of 0.6λ×0.6λ×0.016λ at 3 GHz and could be a good candidate for portable devices.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals DESIGN AND ANALYSIS OF COMPACT METAMATERIAL MIMO ANTENNA FOR WLAN APPLICATIONS

2019 ◽  
Vol 57 (2) ◽  
pp. 223
Author(s):  
Hoa Nguyen Thi Quynh ◽  
Sy Tuan Tran ◽  
Huu Lam Phan ◽  
Duy Tung Phan
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Complementary Split Ring Resonator ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Individual

A compact three-port metamaterial multiple-input-multiple-output (MIMO) antenna using complementary split-ring resonator (CSRR) loaded ground have demonstrated in order to miniaturize the size and improve the antenna performance. The antenna is designed on FR4 material and simulated by HFSS software. By loading CSRRs in the ground plane, the size reduction of 77% of the individual patch antenna element is achieved, which appeared to be the major reason for the obtained the compact MIMO antenna. Furthermore, the simulated results show that the proposed MIMO antenna achieves the total gain higher than 5 dB, the isolation less than -11 dB, the envelope correlation coefficient (ECC) value lower than 0.015, and the bandwidth of 100 MHz through the whole WLAN band from 2.4 GHz to 2.484 GHz, indicating promises for WLAN applications.

Design of a wearable MIMO antenna deployed with an inverted U-shaped ground stub for diversity performance enhancement

2020 ◽  
pp. 1-11
Author(s):  
Anupma Gupta ◽  
Ankush Kansal ◽  
Paras Chawla
Keyword(s):  
Performance Enhancement ◽  
Multiple Input Multiple Output ◽  
The Body ◽  
Structural Deformation ◽  
Mimo Antenna ◽  
Tissue Phantom ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Broadside Radiation

Abstract A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices. Open-end slotting is used to miniaturize the antenna dimensions. Inverted U-shaped ground stub is incorporated to reduce mutual coupling. On-body performance is analyzed on a three-layered equivalent tissue phantom model. The wide bandwidth of 300 MHz and port isolation of 30 dB are obtained from measured results. The antenna shows the efficiency of 40% and directivity of 4.56 dBi when placed at a gap of “s” = 4 mm from the body. Broadside radiation pattern and low specific absorption rate make the antenna suitable for on-body communication. Further, diversity performance is measured in terms of envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL). The value of ECC is 0.025, DG is 9.98 dB, and CCL is 0.12 bits/s/Hz at 2.45 GHz. Antenna robustness is examined by bending the structure at different radii along the x-axis and y-axis. Performance of the proposed structure is reliable with structural deformation.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

Sign in / Sign up

Export Citation Format

Share Document