Electrical resistivity optimization of diamond-like carbon thin film for electrical probe storage application

2016 ◽  
Vol 5 (5) ◽  
Author(s):  
Lei Wang ◽  
Sidi Gong ◽  
Cihui Yang ◽  
Jing Wen
Keyword(s):  
Storage Capacity ◽  
Large Data ◽  
Bottom Layer ◽  
Storage Device ◽  
Diamond Like Carbon ◽  
Storage Devices ◽  
Low Energy Consumption ◽  
Electrical Resistivities ◽  
Electrical Probe ◽  
Global Data

AbstractToday, the total amount of global data has been increasing at a phenomenal rate, and this necessitates the requirement for significant improvement in the storage capacity of current storage devices. Compared with other conventional storage devices, electrical probe memory exhibits several storage superiorities and is considered as the candidate for the next-generation mainstreaming storage device. In this case, to further mitigate the performances of the electrical probe memory, its architecture was previously optimized by simulation while lacking adequate experimental support. Therefore, we measured the electrical resistivities of the diamond-like carbon (DLC) capping and bottom layers by varying the film thickness, sputter power, and sputter pressure to thus establish the physically realistic property values of the DLC film. According to experiments, a 10 nm DLC capping layer with a resistivity of 0.1 Ω·m, and a 30 nm DLC bottom layer with a resistivity of 0.01 Ω·m, which most closely matches the theoretical prediction, are introduced into the originally designed electrical probe memory, and the subsequent recording experiment demonstrated the ability to achieve ultra-high density, large data rate, and ultra-low energy consumption using the redesigned architecture.

scholarly journals Ionic Liquid Electrolytes for Electrochemical Energy Storage Devices

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4000
Author(s):  
Eunhwan Kim ◽  
Juyeon Han ◽  
Seokgyu Ryu ◽  
Youngkyu Choi ◽  
Jeeyoung Yoo
Keyword(s):  
Ionic Liquid ◽  
Energy Storage ◽  
Lithium Ion ◽  
Electrochemical Energy Storage ◽  
Storage Device ◽  
Energy Storage Device ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Storage Ability ◽  
Electrochemical Energy

For decades, improvements in electrolytes and electrodes have driven the development of electrochemical energy storage devices. Generally, electrodes and electrolytes should not be developed separately due to the importance of the interaction at their interface. The energy storage ability and safety of energy storage devices are in fact determined by the arrangement of ions and electrons between the electrode and the electrolyte. In this paper, the physicochemical and electrochemical properties of lithium-ion batteries and supercapacitors using ionic liquids (ILs) as an electrolyte are reviewed. Additionally, the energy storage device ILs developed over the last decade are introduced.

Top-down Fabricated Gold Nanostrip on Silicon-on-insulator Wafer: A Promising Building Block towards Ultra-compact Optical Device

Nanoscale ◽  
2020 ◽  
Author(s):  
Fuping Zhang ◽  
Weikang Liu ◽  
Li Chen ◽  
Zhiqiang Guan ◽  
Hongxing Xu
Keyword(s):  
Optical Communication ◽  
Data Transmission ◽  
Building Block ◽  
High Speed ◽  
Large Data ◽  
Low Energy ◽  
Silicon On Insulator ◽  
Fundamental Building Block ◽  
Low Energy Consumption ◽  
Controllable Fabrication

he plasmonic waveguide is the fundamental building block for high speed, large data transmission capacity, low energy consumption optical communication and sensing. Controllable fabrication and simultaneously optimization of the propagation...

scholarly journals Implications of NVM Based Storage on Memory Subsystem Management

2020 ◽  
Vol 10 (3) ◽  
pp. 999
Author(s):  
Hyokyung Bahn ◽  
Kyungwoon Cho
Keyword(s):  
Random Access ◽  
Disk Drive ◽  
Main Memory ◽  
Memory Storage ◽  
Storage Device ◽  
Storage Devices ◽  
Large Memory ◽  
Memory Subsystems ◽  
Non Volatile Memory ◽  
Management Techniques

Recently, non-volatile memory (NVM) has advanced as a fast storage medium, and legacy memory subsystems optimized for DRAM (dynamic random access memory) and HDD (hard disk drive) hierarchies need to be revisited. In this article, we explore the memory subsystems that use NVM as an underlying storage device and discuss the challenges and implications of such systems. As storage performance becomes close to DRAM performance, existing memory configurations and I/O (input/output) mechanisms should be reassessed. This article explores the performance of systems with NVM based storage emulated by the RAMDisk under various configurations. Through our measurement study, we make the following findings. (1) We can decrease the main memory size without performance penalties when NVM storage is adopted instead of HDD. (2) For buffer caching to be effective, judicious management techniques like admission control are necessary. (3) Prefetching is not effective in NVM storage. (4) The effect of synchronous I/O and direct I/O in NVM storage is less significant than that in HDD storage. (5) Performance degradation due to the contention of multi-threads is less severe in NVM based storage than in HDD. Based on these observations, we discuss a new PC configuration consisting of small memory and fast storage in comparison with a traditional PC consisting of large memory and slow storage. We show that this new memory-storage configuration can be an alternative solution for ever-growing memory demands and the limited density of DRAM memory. We anticipate that our results will provide directions in system software development in the presence of ever-faster storage devices.

scholarly journals Layered double hydroxide membrane with high hydroxide conductivity and ion selectivity for energy storage device

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Hu ◽  
Xiaomin Tang ◽  
Qing Dai ◽  
Zhiqiang Liu ◽  
Huamin Zhang ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Ion Selectivity ◽  
Storage Device ◽  
Hydroxyl Groups ◽  
Flow Battery ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Ions Transport ◽  
Double Hydroxides

AbstractMembranes with fast and selective ions transport are highly demanded for energy storage devices. Layered double hydroxides (LDHs), bearing uniform interlayer galleries and abundant hydroxyl groups covalently bonded within two-dimensional (2D) host layers, make them superb candidates for high-performance membranes. However, related research on LDHs for ions separation is quite rare, especially the deep-going study on ions transport behavior in LDHs. Here, we report a LDHs-based composite membrane with fast and selective ions transport for flow battery application. The hydroxide ions transport through LDHs via vehicular (standard diffusion) & Grotthuss (proton hopping) mechanisms is uncovered. The LDHs-based membrane enables an alkaline zinc-based flow battery to operate at 200 mA cm−2, along with an energy efficiency of 82.36% for 400 cycles. This study offers an in-depth understanding of ions transport in LDHs and further inspires their applications in other energy-related devices.

scholarly journals The Route for Ultra-High Recording Density Using Probe-Based Data Storage Device

NANO ◽  
2015 ◽  
Vol 10 (08) ◽  
pp. 1550118 ◽  
Author(s):  
Lei Wang ◽  
Jing Wen ◽  
CiHui Yang ◽  
Shan Gai ◽  
YuanXiu Peng
Keyword(s):  
Phase Change ◽  
Data Storage ◽  
Electrical Contact ◽  
Crystal Nucleation ◽  
Access Time ◽  
Storage Device ◽  
Electrical Contact Resistance ◽  
Low Energy Consumption ◽  
Modeling Techniques ◽  
Second Period

Phase-change probe memory using Ge2Sb2Te5 has been considered as one of the promising candidates as next-generation data storage device due to its ultra-high density, low energy consumption, short access time and long retention time. In order to utmostly mimic the practical setup, and thus fully explore the potential of phase-change probe memory for 10 Tbit/in2 target, some advanced modeling techniques that include threshold-switching, electrical contact resistance, thermal boundary resistance and crystal nucleation-growth, are introduced into the already-established electrothermal model to simulate the write and read performance of phase-change probe memory using an optimal media stack design. The resulting predictions clearly demonstrate the capability of phase-change probe memory to record 10 Tbit/in2 density under pico Joule energy within micro second period.

scholarly journals Layered double hydroxide membrane with high hydroxide conductivity and ion selectivity for energy storage device

2020 ◽  
Author(s):  
Jing Hu ◽  
Xiaomin Tang ◽  
Qing Dai ◽  
Zhiqiang Liu ◽  
Huamin Zhang ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Ion Selectivity ◽  
Storage Device ◽  
Hydroxyl Groups ◽  
Flow Battery ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Ions Transport ◽  
Double Hydroxides

Abstract Membranes with fast and selective ions transport are highly demanded for energy storage devices. Layered double hydroxides (LDHs), bearing uniform interlayer galleries and abundant hydroxyl groups covalently bonded within two-dimensional (2D) host layers, make them superb candidates for high-performance membranes. However, related research on LDHs for ions separation is quite rare, especially the deep-going study on ions transport behavior in LDHs. Here, we report a LDHs-based composite membrane with fast and selective ions transport for flow battery application. The hydroxide ions transport through LDHs via vehicular (standard diffusion) & Grotthuss (proton hopping) mechanisms is uncovered. The LDHs-based membrane enables an alkaline zinc-based flow battery to operate at 200 mA cm− 2, along with an energy efficiency of 82.36% for 400 cycles, which is among the highest efficiencies for zinc-based flow batteries. This study offers an in-depth understanding of ions transport in LDHs and further inspires their applications in other energy-related devices.

scholarly journals Synergistic approach of high-performance N-NiCo/PC environment benign electrode material for energy storage device

2021 ◽  
Author(s):  
Muhammad Irfan ◽  
Xianhua Liu ◽  
Suraya Mushtaq ◽  
Jonnathan Cabrera ◽  
Pingping Zhang
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Electrode Materials ◽  
Composite Catalyst ◽  
Storage Device ◽  
Energy Storage Devices ◽  
Biomass Waste ◽  
Supercapacitor Application ◽  
Suitable Material ◽  
Storage Devices

Abstract Development of sustainable electrochemical energy storage devices faces great challenge in exploring highly efficient and low cost electrode materials. Biomass waste derived carbonaceous materials can be used as an alternative to expensive metals in supercapacitor. However, their application limited by low performance. In this study, the combination use of persimmon waste derived carbon and transition metal nitride demonstrated strong potential for supercapacitor application. Persimmon based carbonaceous gel decorated with bimetallic-nitride (N-NiCo/PC) was firstly synthesized through a green hydrothermal method. Electrochemical properties of N-NiCo/PC as electrode in 6 M KOH electrolyte solution were evaluated by using cyclic voltammetry (CV) and charge-discharge measurements. The N-NiCo/PC exhibited 895.5 F/g specific capacitance at 1 A/g current density and maintained 91.5% capacitance retention after 900 cycles. Hence, the bimetallic nitride-based-composite catalyst is a potentially suitable material for high-performance energy storage devices. In addition, this work demonstrated a promising pathway for transforming environmental waste into sustainable energy conversion materials.

scholarly journals Designing Structural Electrochemical Energy Storage Systems: A Perspective on the Role of Device Chemistry

2022 ◽  
Vol 9 ◽  
Author(s):  
Adriana M. Navarro-Suárez ◽  
Milo S. P. Shaffer
Keyword(s):  
Energy Storage ◽  
Inorganic Compounds ◽  
Electrical Energy ◽  
Electrochemical Energy Storage ◽  
Storage Device ◽  
Composite Electrodes ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Electrochemical Energy

Structural energy storage devices (SESDs), designed to simultaneously store electrical energy and withstand mechanical loads, offer great potential to reduce the overall system weight in applications such as automotive, aircraft, spacecraft, marine and sports equipment. The greatest improvements will come from systems that implement true multifunctional materials as fully as possible. The realization of electrochemical SESDs therefore requires the identification and development of suitable multifunctional structural electrodes, separators, and electrolytes. Different strategies are available depending on the class of electrochemical energy storage device and the specific chemistries selected. Here, we review existing attempts to build SESDs around carbon fiber (CF) composite electrodes, including the use of both organic and inorganic compounds to increase electrochemical performance. We consider some of the key challenges and discuss the implications for the selection of device chemistries.

scholarly journals Research on molecular energy storage

2021 ◽  
Vol 1 (3) ◽  
pp. 49-56
Author(s):  
S.M. Zuyev ◽  
◽  
R.A. Maleyev ◽  
YU.M. Shmatkov ◽  
M.YU. Khandzhalov ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Energy Storage ◽  
Lithium Ion Battery ◽  
Double Layer ◽  
Lithium Ion ◽  
Storage Device ◽  
Energy Storage Device ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Advantages And Disadvantages

This article provides a comparative analysis of various energy storage devices. A detailed review and analysis of molecular energy storage units is carried out, their main characteristics and parame-ters, as well as their application areas, are determined. The main types of molecular energy storage are determined: electric double layer capacitors, pseudo capacitors, hybrid capacitors. Comparison of the characteristics of various batteries is given. The parameters of various energy storage devices are presented. The analysis of molecular energy storage devices and accumulators is carried out. Ttheir advantages and disadvantages are revealed. It has been shown that molecular energy storage or double layer electrochemical capacitors are ideal energy storage systems due to their high specific energy, fast charging and long life compared to conventional capacitors. The article presents oscillograms of a lithium-ion battery with a voltage of 10.8 V at a pulsed load current of 2A of a laptop with and without a molecular energy storage device, as well as oscil-lograms of a laptop with DVD lithium-ion battery with a voltage of 10.8 V with a parallel shutdown of a molecular energy storage device with a capacity of 7 F and without it. The comparative analysis shows that when the molecular energy storage unit with a 7 F capacity is switched on and off, transient processes are significantly improved and there are no supply voltage dips. The dependenc-es of the operating time of a 3.6 V 600 mAh lithium-ion battery at a load of 2 A for powering mo-bile cellular devices with and without a molecular energy storage are given. It is shown that when the molecular energy storage device is switched on, the battery operation time increases by almost 20%.

MEDIAPOD: A POCKET-SIZED AND PERSONALIZED MULTIMEDIA DESKTOP

2010 ◽  
Vol 04 (02) ◽  
pp. 181-202
Author(s):  
SHAYA POTTER ◽  
OREN LAADAN ◽  
RICARDO BARATTO ◽  
LEONARD KIM ◽  
JASON NIEH
Keyword(s):  
Mobile Users ◽  
Storage Device ◽  
Storage Devices ◽  
Portable System ◽  
Capacity Cost

We present MediaPod, a portable system that allows mobile users to maintain the same persistent, personalized multimedia desktop environment on any available computer. Regardless of which computer is being used, MediaPod provides a consistent multimedia desktop session, maintaining all of a user's applications, documents and configuration settings. This is achieved by leveraging rapid improvements in capacity, cost, and size of portable storage devices. MediaPod provides a virtualization and checkpoint-restart mechanism that decouples a desktop environment and its applications from the host, enabling multimedia desktop sessions to be suspended to portable storage, carried around, and resumed from the storage device on another computer. MediaPod virtualization also isolates desktop sessions from the host, protecting the privacy of the user and preventing malicious applications from damaging the host. We have implemented a Linux MediaPod prototype and demonstrate its ability to quickly suspend and resume multimedia desktop sessions, enabling a seamless computing experience for mobile users as they move among computers.

Sign in / Sign up

Export Citation Format

Share Document