Application of chemically-cross-linked chitosan for the removal of Reactive Black 5 and Reactive Yellow 84 dyes from aqueous solutions

2013 ◽  
Vol 33 (8) ◽  
pp. 735-747 ◽  
Author(s):  
Urszula Filipkowska ◽  
Tomasz Jóźwiak
Keyword(s):  
Reactive Dyes ◽  
Equilibrium Concentration ◽  
Sorption Process ◽  
Reactive Black 5 ◽  
Chitosan Beads ◽  
Sorption Data ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Effective Sorbent

Abstract The study analyzed the sorption effectiveness of reactive dyes, Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84), onto non-cross-linked chitosan beads (CHs) and onto CHs cross-linked with glutaraldehyde (ALD) i.e., ALD-CHs and epichlorohydrin (ECH) i.e., ECH-CHs. The study enabled determination of the optimal ratio of the cross-linking agent to chitosan and the optimal pH of the sorption process (from the range of 1:10–10:1, to 2–12, respectively). The time needed to reach the equilibrium concentration reached 504 h. Satisfactory effects of RB5 and RY84 sorption were achieved after 24 h sorption. Data were described with the heterogenous Langmuir’s model (double Langmuir’s equation). For RB5 dye, the most effective sorbent turned out to be CHs – the maximum sorption capacity reached 2025.11 (mg/g). For the other sorbents, ALD-CHs and ECH-CHs, the capacity accounted for 1797.0 mg/g and 1816.1 mg/g, respectively. In the case of RY84 dye, the most effective sorbent appeared to be ECH-CHs – 2234.3 mg/g. For CHs and ALD-CHs, the highest sorption capacities against RY84 reached 1774.2 and 2000.1 mg/g, respectively.

scholarly journals Use of aminated hulls of sunflower seeds for the removal of anionic dyes from aqueous solutions

2019 ◽  
Vol 17 (3) ◽  
pp. 1211-1224 ◽  
Author(s):  
T. Jóźwiak ◽  
U. Filipkowska ◽  
S. Brym ◽  
L. Kopeć
Keyword(s):  
Sorption Capacity ◽  
Textile Industry ◽  
Sunflower Seed ◽  
Freundlich Isotherm ◽  
Sorption Kinetics ◽  
Reactive Black 5 ◽  
Anionic Dyes ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption

Abstract In this study, we analyzed the effectiveness of sorption of dyes popular in the textile industry (Reactive Black 5, Reactive Yellow 84, Acid Yellow 23, and Acid Red 18) on aminated and non-aminated seed hulls of common sunflower (Helianthus annuus L.). The scope of the study included: determination of the effect of pH on dye sorption effectiveness, sorption kinetics analyses (sorption equilibrium time, pseudo-first-order/pseudo-second-order model, intramolecular diffusion model), and determination of the maximum sorption capacity against dyes (Langmuir/Freundlich isotherm). The sorbent was subjected to the FTIR analysis. The sorption capacity of the aminated sunflower seed hulls against reactive dyes RB5 and RY84 accounted for 51.02 mg/g and 63.27 mg/g, respectively, and was higher by 1665% (17.6 times higher) and 1425% (15.3 times higher) compared to that of non-modified hulls. In the case of acidic dyes, Acid Yellow 23 and Acid Red 18, the sorption capacity of the aminated sunflower seed hulls reached 44.78 mg/g and 42.19 mg/g, respectively, and was higher by 1881% (19.8 times higher) and 2284% (23.8 times higher), respectively, compared to the non-modified hulls.

scholarly journals THE INFLUENCE OF CHITIN AMINATION ON THE EFFECTIVENESS OF RB5 AND RY84 DYE SORPTION

2018 ◽  
Vol XXIII ◽  
pp. 66-75
Author(s):  
Urszula Filipkowska ◽  
Tomasz Jóźwiak ◽  
Paula Bugajska ◽  
Małgorzata Kuczajowska-Zadrożna
Keyword(s):  
Experimental Data ◽  
Molecular Weight ◽  
Sorption Capacity ◽  
Reactive Dyes ◽  
Adsorptive Capacity ◽  
Reactive Black 5 ◽  
Maximum Sorption Capacity ◽  
Dye Sorption ◽  
Maximum Sorption ◽  
Optimal Ph

This article presents the influence of chitin amination on the effectiveness of RB5 and RY84 dye sorption. For chitin and chitin modified by amination, the optimal pH of sorption and the maximum sorption capacity were determined in relation to two reactive dyes: Reactive Black 5 (RB5) and Reactive Yellow 84 (RY84), differing in the active group and molecular weight. Three sorption models were used to describe the experimental data: Langmuir, Langmuir 2 and Freundlich. The highest sorption capacity was obtained for aminated chitin for both tested dyes: 386.53 mg/g for RB5 and 261.56 mg/g for RY84. In the case of sorption on unmodified chitin, the sorption capacities were lower: up to 235.65 mg/g.d.m. for RB5 and 208.88 mg/g.d.m. for RY84. The modification of chitin by amination has a beneficial effect on the amount of dye adsorbed in the process. The adsorptive capacity increased by 1.6-times in the case of RB5 and 1.25-times in case of RY84.

scholarly journals Malachite Green Removal by Activated Potassium Hydroxide Clove Leaf Agrowaste Biosorbent: Characterization, Kinetic, Isotherm, and Thermodynamic Studies

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Dyan Hatining Ayu Sudarni ◽  
Uyiosa Osagie Aigbe ◽  
Kingsley Eghonghon Ukhurebor ◽  
Robert Birundu Onyancha ◽  
Heri Septya Kusuma ◽  
...  
Keyword(s):  
Malachite Green ◽  
Potassium Hydroxide ◽  
Low Cost ◽  
Cost Effective ◽  
Sorption Process ◽  
Water Soluble ◽  
Maximum Sorption Capacity ◽  
Effective Removal ◽  
Maximum Sorption

Although several approaches have been explored for the removal of dyes and other toxic materials from water as well as the entire environment, notwithstanding, researchers/scientists are still pursuing novel, low-cost, and eco-friendly biosorbents for the effective removal of such contaminants. Herein, clove leaves (CL) were utilized as a biosorbent for the sequestration of malachite green (MG) from a water-soluble solution. The CL was subsequently activated using potassium hydroxide (KOH) and characterized using the FTIR and FESEM to determine the functional groups on the activated clove leaves (CL-KOH) and the morphology of the adsorbent. The adsorption of MG was observed to be relatively dependent on the dosage of sorbent utilized, initial MG concentration, and sorption process contact time. The adsorption process of MG to CL was ideally described using the Dubinin–Radushkevich and Elovich models with the determination of maximum sorption capacity of approximately 131.6 mg·g-1. Furthermore, the thermodynamic parameters calculated showed that the adsorption of MG to the adsorbent was exothermic with the process involving physical sorption as well as chemical sorption processes with negligible adsorption energy. In conclusion, the study has revealed that the CL is a cost-effective biosorbent with high adsorption efficiency for the sequestration of MG from a water-soluble solution and can be recycled for further usage.

Adsorption of CuCl2 on Mg-Al HTlc: Effect of EDTA and Addition Sequences

2012 ◽  
Vol 573-574 ◽  
pp. 150-154
Author(s):  
Yun Bo Zang ◽  
Nai Ying Wu
Keyword(s):  
Aqueous Solutions ◽  
Sorption Capacity ◽  
Contact Time ◽  
Room Temperature ◽  
Copper Ions ◽  
Sorption Process ◽  
Langmuir Model ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Pseudo Second Order

In this study, removal of copper ions from aqueous solutions by synthetic Mg-Al-HTlc was investigated as a function of contact time, EDTA and addition sequences at room temperature. It is found that HTlc could reduced copper ions concentration effectively. The kinetics closely fit pseudo-second order kinetics with necessary time 9 h to reach equilibrium. The sorption process followed langmuir model. The maximum sorption capacity calculated was found to be 39.4 mg/g. The presence of EDTA and addition sequences could affect sorption of Cu(II) onto HTlc.

Cucumis melo Rind as Biosorbent to Remove Fe(II) and Mn(II) from Synthetic Groundwater Solution

2013 ◽  
Vol 795 ◽  
pp. 266-271 ◽  
Author(s):  
Norzila Othman ◽  
Syazwani Mohd Asharuddin
Keyword(s):  
Aqueous Solution ◽  
Metal Ions ◽  
Metal Concentration ◽  
Sorption Capacity ◽  
Cucumis Melo ◽  
Carboxyl Groups ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Synthetic Groundwater ◽  
Effective Sorbent

Cucumis melo rind was evaluated as a new biosorbent for the removal of Fe (II) and Mn (II) from synthetic groundwater solution. The maximum sorption capacity of Fe (II) and Mn (II) was found to be 4.98 mg/g and 1.37 mg/g respectively. Sorption was most efficient at pH 7 and 6.5 for Fe (II) and Mn (II) respectively. The biosorption of both metals increased as the quantity of biosorbent increased. The increase in initial metal concentration was associated with steep increase in biosorption at lower concentrations and progressively reaching towards plateau at higher metal concentration. FTIR demonstrated that hydroxyl and carboxyl groups were involved in the biosorption of the metal ions. The study points to the potential of new use of Cucumis melo rind as an effective sorbent for the removal of Fe (II) and Mn (II) from aqueous solution.

Features of adsorption processes for wastewater treatment from zinc ions

2021 ◽  
Vol 6 (2) ◽  
pp. 64-68
Author(s):  
Ihor Petrushka ◽  
◽  
Oksana Bratus ◽  
Kateryna Petrushka ◽  
◽  
...  
Keyword(s):  
Sorption Process ◽  
Adsorption Properties ◽  
Zinc Ions ◽  
Optimal Conditions ◽  
Solid Complex ◽  
Monomolecular Layer ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Adsorption Processes ◽  
Langmuir And Freundlich Models

The results of adsorption properties of complex natural sorbents in relation to the neutralization of zinc ions from wastewater are presented. The adsorption isotherm of Zn2+ ions on complex sorbents (clinoptilolite-shungite) (1:1) according to Langmuir and Freundlich models is constructed, the type of adsorption isotherms according to S. Brunauer classification is established. The value of the maximum sorption capacity of Gmax complex sorbents for Zn2+ ions is calculated. The peculiarities of the sorption process of zinc ions with the formation of a monomolecular layer based on the calculated coefficients of the Langmuir and Freundlich were found. The optimal conditions for the dependence of the degree of absorption of Zn2+ ions by complex sorbents on the duration of the sorption process are determined. The ratio "solid (complex sorbent) - liquid" was determined experimentally.

Sorption of thallium(I) ions by peat

2013 ◽  
Vol 68 (10) ◽  
pp. 2208-2213 ◽  
Author(s):  
Artis Robalds ◽  
Maris Klavins ◽  
Liga Dreijalte
Keyword(s):  
Sorption Capacity ◽  
Batch Mode ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Pseudo Second Order ◽  
Copper Zinc ◽  
Industrial Use ◽  
Kinetics Of ◽  
Kinetics Of Sorption ◽  
Effective Sorbent

The increasing industrial use of thallium has raised the need for removal of this highly toxic element from wastewater. Thallium is more toxic than cadmium, copper, zinc, lead and mercury and as it is easily accumulated in humans, animals and plants, it poses a threat to both the environment and human health. Peat has been used as an effective, relatively cheap and easily available sorbent to treat waters containing heavy metals. In this study, peat was characterized and used as sorbent for the removal of Tl(I) ions from aqueous solution. The effect of initial Tl(I) concentration, pH, contact time, temperature and ionic strength was studied in batch mode. The maximum sorption capacity of peat reached 24.14 mg/g at 20 °C and initial Tl(I) concentration of 500 mg/L. Sorption capacity was found to be pH dependent and maximum uptake occurred at pH 10. Kinetic data revealed that sorption was relatively rapid – 82.8% of Tl(I) ions were sorbed in the first 10 min. The kinetics of sorption was analyzed using pseudo-first order and pseudo-second order models. Results show that peat can be used as an effective sorbent to remove Tl(I) ions from aqueous solutions.

An application research for near-surface repository of strontium-90 sorption kinetic model on mudrocks

Kerntechnik ◽  
2021 ◽  
Vol 86 (6) ◽  
pp. 404-410
Author(s):  
Y. Shi ◽  
W. Chen ◽  
H. Lin ◽  
Z. Gao ◽  
B. Yang ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Sorption Capacity ◽  
Rate Constant ◽  
Local Environment ◽  
Sorption Process ◽  
Sorption Kinetic ◽  
Near Surface ◽  
Maximum Sorption Capacity ◽  
Groundwater Environment ◽  
Maximum Sorption

Abstract In this study,90Sr was used as the test radionuclide to characterize the sorption kinetics and effects of initial 90Sr activity and remaining 90Sr in solid concentration were simulated for a near-surface repository. The study focused on the sorption characteristics of radionuclides in unsaturated groundwater environment (or vadose zone) is the important information for investigating the near-surface disposal of intermediate and low-level radioactive waste (ILLW). Moreover, the 90Sr sorption experiments reached equilibrium within 56 h, which fit to the first order sorption kinetic model, and the remaining 90Sr in mudrock samples showed obvious sorption equilibrium hysteresis, which fit to the second order sorption kinetic model. Before reaching the maximum sorption capacity, the sorption rate constant increases with 90Sr increasing; the distribution coefficient (Kd) of 56 h decreases with the remaining 90Sr decreasing. In addition, it showed that the slow sorption process dominated before the sorption reaches equilibrium. In fact, a reliable safety assessment methodology for on-going near-surface repository required a lot of the radionuclides parameters with local environment including the radionuclides sorption/desorption rate constant and maximum sorption capacity.

Technology of Obtaining Sorbents Based on Metal Dust and Carbonized Biopolymers for Purification of Surface and Waste Water From Oil and Oil Products

2020 ◽  
Vol 24 (3) ◽  
pp. 24-28
Author(s):  
L.N. Olshanskaya ◽  
M.A. Chernova ◽  
O.A. Aref'eva ◽  
E.M. Bakanova ◽  
E.V. Yakovleva ◽  
...  
Keyword(s):  
Waste Water ◽  
Sorption Process ◽  
Product Layer ◽  
Contaminated Water ◽  
Sorption Equilibrium ◽  
Gas Treatment ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Metal Dust ◽  
Oil And Oil Products

The results on the production of composite magnetosorbents (CMS) based on agricultural wastes (uncontaminated steel gas treatment dust – PGSN, sunflower husk, paraffin) for the treatment of contaminated water from oil and its products and minimizing the environmental impact of petrochemical enterprises are presented. Biotesting at two test sites (crustaceans Daphnia magna and algae Scenedesmus quadricauda) allowed us to establish that PSGN is non-toxic and can be used as a component of magnetosorbents. The resulting materials showed good physicochemical properties. It was shown that CMC have high hydrophobicity – the contact angle of contact was 125–137 degrees; buoyancy of the material for 96 hours did not decrease below 97–99 %; CMC had a low water absorption of 0.132–0.114 g/g. The oil intensity of the sorbents was 6.0 ± 0.15 g/g. Sorption equilibrium was achieved during the first 10–20 minutes contact of the material with oil and oil productsand remained constant. It has been established that the sorption process is influenced by the nature and thickness of the oil product layer. The maximum sorption capacity is achieved with a film thickness of 3.5 ± 0.15 mm.

Two-pot oxidative preparation of dicarboxylic acid containing cellulose for the removal of Beryllium (Be2+) from aqueous solution.

2020 ◽  
Vol 16 ◽  
Author(s):  
Vedat Tolga Özdemir ◽  
Himmet Mert Tuğaç ◽  
Özgür Arar
Keyword(s):  
Aqueous Solution ◽  
Low Cost ◽  
Initial Step ◽  
Sorption Process ◽  
Hydroxyl Groups ◽  
Solution Ph ◽  
Maximum Sorption Capacity ◽  
Maximum Sorption ◽  
Aldehyde Groups ◽  
Kinetics Of

Background: Cellulose is one of the most abundant, non-toxic, and renewable natural biopolymers. The presence of hydroxyl groups in cellulose leads to further modification of it. Preparation and modification of cellulose-based sorbents and their applications on water treatment gained traction in recent years. Objective: A low-cost and eco-friendly biosorbent was designed and fabricated by introducing the acetate functional groups into cellulose for removing Beryllium (Be2+) from an aqueous solution. The so rption of Be2+ on acetate containing cellulose was evaluated for varying sorbent doses and initial solution pH values. Method: The sorbent was prepared by a two-step oxidation process. In the initial step, cellulose reacted with NaIO4 and aldehyde groups were introduced to cellulose. In the second step, newly obtained aldehyde groups were oxidized to create acetate groups. Results: The kinetics of the sorption process showed that Be2+ uptake reached equilibrium in 3 minutes. The sorption isotherm was well fitted in the Langmuir model, and maximum sorption capacity was 4.54 mg/g. Moreover, the thermodynamic studies demonstrated that Be2+ sorption is spontaneous and exothermic. Furthermore, the prepared sorbent can be regenerated by using 0.1 M HCl or H2SO4 solutions. Conclusion: Removal of Be2+ is pH dependent and it is favorable at high solution pH. The kinetics of the prepared sorbent is rapid and equilibrium attained in 3 minutes. The prepared sorbent can be regenerated with 0.1 M acid solution with > 99% efficiency.

Sign in / Sign up

Export Citation Format

Share Document