Electronic structure theory study of the reactivity and structural molecular properties of halo-substituted (F, Cl, Br) and heteroatom (N, O, S) doped cyclobutane

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Moses M. Edim ◽  
Hitler Louis ◽  
Emmanuel A. Bisong ◽  
Apebende G. Chioma ◽  
Obieze C. Enudi ◽  
...  
Keyword(s):  
Electrostatic Potential ◽  
Electrostatic Interactions ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Population Analysis ◽  
Lone Pair ◽  
Nbo Analysis ◽  
Structure Theory ◽  
Potential Energy Distribution ◽  
Distribution Analysis

Abstract Cyclobutane and its halo-substituted derivatives and its heteroatom doped derivatives have been extensively investigated in this study because of the vast applications and interesting chemistry associated with them, the vibrational assignments, Natural Bond Orbital (NBO) analysis, Conceptual Density Functional Theory, Quantum Mechanical Descriptors and Molecular Electrostatic Potential (MEP) analysis have been explored in this study. The corresponding wavenumbers of the studied compounds have as well been assigned by Potential Energy Distribution analysis. Several inter and intramolecular hyperconjugative interactions within the studied compounds have been revealed by the NBO analysis with a confirmation of geometric hybridization and electronic occupancy. The compounds reactivity was observed to decrease down the halo group in manners such as the stability, both were observed to decrease from azetidine to thietane. The distribution of charge was observed to be affected by the ring substituent as observed from the charge population analysis; in addition, adjacent atoms are very much affected by the inherent properties of the substituted atoms. The NBO result suggests that the molecules are stabilized by lone pair delocalization of electrons from the substituted atoms and molecular electrostatic potential (MEP) studies revealed that substituted halogens and doped heteroatoms are important and most probable sites of electrostatic interactions.

Density functional theory, Comparative vibrational spectroscopic studies, HOMO-LUMO, and NBO analysis of Trichloro isocyanuric acid and Trithio cyanuric acid

2015 ◽  
Vol 8 (3) ◽  
pp. 2197-2221
Author(s):  
Theraviyum Chithambarathanu ◽  
M. Darathi ◽  
J. DaisyMagdaline ◽  
S. Gunasekaran
Keyword(s):  
Density Functional ◽  
Cyanuric Acid ◽  
Nbo Analysis ◽  
Basis Set ◽  
Potential Energy Distribution ◽  
Point Energy ◽  
Isocyanuric Acid ◽  
Ft Ir ◽  
Homo Lumo ◽  
Ft Raman

The molecular vibrations of Trichloro isocyanuric acid (C3Cl3N3O3) and Trithio cyanuric acid (C3H3N3S3) have been investigated in polycrystalline sample at room temperature by Fourier Transform Infrared (FT-IR) and FT-Raman spectroscopies in the region 4000-450 cm-1 and 4000-50 cm-1 respectively, which provide a wealth of structural information about the molecules. The spectra are interpreted with the aid of normal co-ordinate analysis following full structure optimization and force field calculations based on density functional theory   (DFT) using standard B3LYP / 6-311++ G (d, p) basis set for investigating the structural and spectroscopic properties. The vibrational frequencies are calculated and the scaled values are compared with experimental FT-IR and FT-Raman spectra. The scaled theoretical wave numbers shows very good agreement with experimental ones. The complete vibrational assignments are performed on the basis of potential energy distribution (PED) of vibrational modes, calculated with scaled quantum (SQM) method. Stability of the molecule arising from hyper conjugative interactions, charge delocalization has been analyzed using natural bond orbital (NBO) analysis. The results show that change in electron density (ED) in σ* and π* anti-bonding orbitals and second order delocalization   energy (E2) confirm the occurrence of Intra molecular Charge Transfer (ICT) within the molecule. The thermodynamic properties like heat capacity, entropy, enthalpy and zero point energy have been calculated for the molecule. The frontier molecular orbitals have been visualized and the HOMO-LUMO energy gap has been calculated. The Molecular Electrostatic Potential (MEP) analysis reveals the sites for electrophilic attack and nucleophilic reactions in the molecule.

scholarly journals Investigation of Some Antiviral N-Heterocycles as COVID 19 Drug: Molecular Docking and DFT Calculations

2020 ◽  
Vol 21 (11) ◽  
pp. 3922 ◽  
Author(s):  
Mohamed Hagar ◽  
Hoda A. Ahmed ◽  
Ghadah Aljohani ◽  
Omaima A. Alhaddad
Keyword(s):  
Dipole Moment ◽  
Molecular Docking ◽  
Dft Calculations ◽  
Binding Affinity ◽  
Electrostatic Potential ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Hydrophobic Interactions ◽  
Chemical Reactivity ◽  
Main Protease

The novel coronavirus, COVID-19, caused by SARS-CoV-2, is a global health pandemic that started in December 2019. The effective drug target among coronaviruses is the main protease Mpro, because of its essential role in processing the polyproteins that are translated from the viral RNA. In this study, the bioactivity of some selected heterocyclic drugs named Favipiravir (1), Amodiaquine (2), 2′-Fluoro-2′-deoxycytidine (3), and Ribavirin (4) was evaluated as inhibitors and nucleotide analogues for COVID-19 using computational modeling strategies. The density functional theory (DFT) calculations were performed to estimate the thermal parameters, dipole moment, polarizability, and molecular electrostatic potential of the present drugs; additionally, Mulliken atomic charges of the drugs as well as the chemical reactivity descriptors were investigated. The nominated drugs were docked on SARS-CoV-2 main protease (PDB: 6LU7) to evaluate the binding affinity of these drugs. Besides, the computations data of DFT the docking simulation studies was predicted that the Amodiaquine (2) has the least binding energy (−7.77 Kcal/mol) and might serve as a good inhibitor to SARS-CoV-2 comparable with the approved medicines, hydroxychloroquine, and remdesivir which have binding affinity −6.06 and −4.96 Kcal/mol, respectively. The high binding affinity of 2 was attributed to the presence of three hydrogen bonds along with different hydrophobic interactions between the drug and the critical amino acids residues of the receptor. Finally, the estimated molecular electrostatic potential results by DFT were used to illustrate the molecular docking findings. The DFT calculations showed that drug 2 has the highest of lying HOMO, electrophilicity index, basicity, and dipole moment. All these parameters could share with different extent to significantly affect the binding affinity of these drugs with the active protein sites.

scholarly journals Unsaturated and Benzannulated N-Heterocyclic Carbene Complexes of Titanium and Hafnium: Impact on Catalysts Structure and Performance in Copolymerization of Cyclohexene Oxide with CO2

Molecules ◽  
2020 ◽  
Vol 25 (19) ◽  
pp. 4364
Author(s):  
Lakshmi Suresh ◽  
Ralte Lalrempuia ◽  
Jonas B. Ekeli ◽  
Francis Gillis-D’Hamers ◽  
Karl W. Törnroos ◽  
...  
Keyword(s):  
Density Functional ◽  
Lone Pair ◽  
Catalytic Performance ◽  
Nbo Analysis ◽  
Cyclohexene Oxide ◽  
Group 4 ◽  
Low Co2 ◽  
And Performance ◽  
High Yields ◽  
Oxygen Lone Pair

Tridentate, bis-phenolate N-heterocyclic carbenes (NHCs) are among the ligands giving the most selective and active group 4-based catalysts for the copolymerization of cyclohexene oxide (CHO) with CO2. In particular, ligands based on imidazolidin-2-ylidene (saturated NHC) moieties have given catalysts which exclusively form polycarbonate in moderate-to-high yields even under low CO2 pressure and at low copolymerization temperatures. Here, to evaluate the influence of the NHC moiety on the molecular structure of the catalyst and its performance in copolymerization, we extend this chemistry by synthesizing and characterizing titanium complexes bearing tridentate bis-phenolate imidazol-2-ylidene (unsaturated NHC) and benzimidazol-2-ylidene (benzannulated NHC) ligands. The electronic properties of the ligands and the nature of their bonds to titanium are studied using density functional theory (DFT) and natural bond orbital (NBO) analysis. The metal–NHC bond distances and bond strengths are governed by ligand-to-metal σ- and π-donation, whereas back-donation directly from the metal to the NHC ligand seems to be less important. The NHC π-acceptor orbitals are still involved in bonding, as they interact with THF and isopropoxide oxygen lone-pair donor orbitals. The new complexes are, when combined with [PPN]Cl co-catalyst, selective in polycarbonate formation. The highest activity, albeit lower than that of the previously reported Ti catalysts based on saturated NHC, was obtained with the benzannulated NHC-Ti catalyst. Attempts to synthesize unsaturated and benzannulated NHC analogues based on Hf invariably led, as in earlier work with Zr, to a mixture of products that include zwitterionic and homoleptic complexes. However, the benzannulated NHC-Hf complexes were obtained as the major products, allowing for isolation. Although these complexes selectively form polycarbonate, their catalytic performance is inferior to that of analogues based on saturated NHC.

Density Functional Theory (DFT) and Natural Bond Orbital (NBO) Investigation of Intra/Intermolecular Hydrogen Bond Interaction in Sulfonated Nata-De Coco-Water (NDCS-(H2O)n)

2020 ◽  
Vol 17 (6) ◽  
pp. 2812-2819
Author(s):  
Sitti Rahmawati ◽  
Cynthia Linaya Radiman ◽  
Muhamad Abdulkadir Martoprawiro ◽  
Siti Nuryanti
Keyword(s):  
Hydrogen Bonds ◽  
Proton Transfer ◽  
Density Functional ◽  
Intermolecular Hydrogen Bond ◽  
Lone Pair ◽  
Dft Method ◽  
Nbo Analysis ◽  
Hydrogen Bond Interaction ◽  
Sulfonic Group ◽  
The One

This research aim to study the conformation, hydrogen bonding network, and stability of all possible molecular interactions between sulfonated nata-de-coco membranes with water (NDCS-(H2O)n), n = 1–5) as well as associate them with results of phosphorylated nata-de-coco reported previously, to determine the potential of proton transfer within both systems. The calculations used DFT method at the B3LYP/6-311G** level as well as NBO analysis. The strongest hydrogen bonds were found among sulfonic group in NDCS-(H2O)5 and the oxygen in the water molecules. The stabilization energy of NDCS-(H2O)5 is 98.9 kcal/mol, That is much greater than that found in NDCP-(H2O)5 This suggests that the NDCS was more easily to donate its lone pair and that the hydrogen bonds between sulfonic group and water molecule were stronger, so that it was easier to transfer protons to another sulfonic group than to NDCP. The energy profile showed that barrier energy was roughly 58.1 kcal/mol and 138.6 kcal/mol for NDCS-(H2O)5 and NDCP-(H2O)5 respectively. Proton transfer in NDCS-(H2O)5 generated a lower energy-barrier than the one in NDCP-(H2O)5

scholarly journals On the Importance of Halogen Bonding Interactions in Two X-ray Structures Containing All Four (F, Cl, Br, I) Halogen Atoms

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1406
Author(s):  
Dmitriy F. Mertsalov ◽  
Rosa M. Gomila ◽  
Vladimir P. Zaytsev ◽  
Mikhail S. Grigoriev ◽  
Eugeniya V. Nikitina ◽  
...  
Keyword(s):  
Electrostatic Potential ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Halogen Bonding ◽  
Noncovalent Interaction ◽  
Functional Theory ◽  
X Ray ◽  
Halogen Atoms ◽  
Interaction Plot

This manuscript reports the synthesis and X-ray characterization of two octahydro-1H-4,6-epoxycyclopenta[c]pyridin-1-one derivatives that contain the four most abundant halogen atoms (Ha) in the structure with the aim of studying the formation of Ha···Ha halogen bonding interactions. The anisotropy of electron density at the heavier halogen atoms provokes the formation of multiple Ha···Ha contacts in the solid state. That is, the heavier Ha-atoms exhibit a region of positive electrostatic potential (σ-hole) along the C–Ha bond and a belt of negative electrostatic potential (σ-lumps) around the atoms. The halogen bonding assemblies in both compounds were analyzed using density functional theory (DFT) calculations, molecular electrostatic potential (MEP) surfaces, the quantum theory of “atom-in-molecules” (QTAIM), the noncovalent interaction plot (NCIplot), and the electron localization function (ELF).

scholarly journals Gas Phase Acidities of Organic Acids Based on 9H-Fluorene Scaffold: A DFT Study

2021 ◽  
Author(s):  
Hamid Saeidian ◽  
Baharak Farzin ◽  
Zohreh Mirjafary
Keyword(s):  
Dft Calculations ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Point Of View ◽  
Computational Method ◽  
Distribution Analysis ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Mineral Acids ◽  
Conjugate Bases

Abstract The density functional theory (DFT) calculations have been performed on a new set of organic Brønsted acids based on 9H-fluorene scaffold. The optimal structures and acidity of the compounds have been calculated by using DFT/B3LYP/6-31++G(d,p) computational method. The acidity of the designed compounds was obtained in the range of 276-328 kcal/mol that the fluorene scaffold bearing ketenimine group 17 and trifilic group 20 with ΔHacid of 276.3 and 285.4 kcal/mol, respectively were found to be within the range of superacids, being more acidic than simple fluorene and mineral acids. The designed compounds and the corresponding conjugate bases were also examined from the aromaticity indices point of view. The tautomerization process for some designed structures was investigated by DFT calculations. Molecular electrostatic potential analysis for the designed acids and the corresponding conjugate bases were also used for charge distribution analysis.

scholarly journals Crystal structure and DFT study of a zinc xanthate complex

2019 ◽  
Vol 75 (11) ◽  
pp. 1582-1585 ◽  
Author(s):  
Adnan M. Qadir ◽  
Sevgi Kansiz ◽  
Necmi Dege ◽  
Georgina M. Rosair ◽  
Igor O. Fritsky
Keyword(s):  
Molecular Structure ◽  
Electrostatic Potential ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Energy Gap ◽  
Three Dimensional ◽  
Intramolecular Interactions ◽  
Lumo Energy ◽  
Functional Theory ◽  
Homo Lumo

In the title compound, bis(2-methoxyethyl xanthato-κS)(N,N,N′,N′-tetramethylethylenediamine-κ2 N,N′)zinc(II) acetone hemisolvate, [Zn(C4H7O2S2)2(C6H16N2)]·0.5C3H6O, the ZnII ion is coordinated by two N atoms of the N,N,N′,N′-tetramethylethylenediamine ligand and two S atoms from two 2-methoxyethyl xanthate ligands. The amine ligand is disordered over two orientations and was modelled with refined occupancies of 0.538 (6) and 0.462 (6). The molecular structure features two C—H...O and two C—H...S intramolecular interactions. In the crystal, molecules are linked by weak C—H...O and C—H...S hydrogen bonds, forming a three-dimensional supramolecular architecture. The molecular structure was optimized using density functional theory (DFT) at the B3LYP/6–311 G(d,p) level. The smallest HOMO–LUMO energy gap (3.19 eV) indicates the suitability of this crystal for optoelectronic applications. The molecular electrostatic potential (MEP) further identifies the positive, negative and neutral electrostatic potential regions of the molecules. Half a molecule of disordered acetone was removed with the solvent-mask procedure in OLEX2 [Dolomanov et al. (2009). J. Appl. Cryst. 42, 339–341] and this contribition is included in the formula.

scholarly journals Theoretical Evaluation on The Interaction Between Triglycerides and Methylxanthines Using Density Functional Theory B3LYP/6-31G(d,p) and Molecular Electrostatic Potential

2020 ◽  
Vol 33 (1) ◽  
pp. 171-178
Author(s):  
N.F.M. Azmi ◽  
R. Ali ◽  
A.A. Azmi ◽  
M.Z.H. Rozaini ◽  
K.H.K. Bulat ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Hydrogen Bond ◽  
Electrostatic Potential ◽  
Density Functional ◽  
Molecular Electrostatic Potential ◽  
Basis Set ◽  
Individual Species ◽  
Interaction Energies ◽  
Binding Interaction ◽  
Functional Theory

The binding, interaction and distortion energies between the main triglycerides, palmitic-oleic-stearic (POS) in cocoa butter versus palmitic-oleic-palmitic (POP) in refined, bleached and deodorized (RBD) palm oil with cocoa′s methylxanthines (caffeine, theobromine, and theophylline) during the production of chocolate were theoretically studied and reported. The quantum mechanical software package of Gaussian09 at the theoretical level of density functional theory B3LYP/6-31G(d,p) was employed for all calculations, optimization, and basis set superposition errors (BSSE). Geometry optimizations were carried out to the minimum potential energy of individual species and binary complexes formed between the triglycerides, methylxanthines and polyphenols. The interaction energies for the optimized complexes were then corrected for the BSSE using the counterpoise method of Boys and Bernardi. The results revealed that the binding energy and interaction energy between methylxanthine components in cocoa powder with triglycerides were almost of the same magnitude (13.6-14.5 and 3.4-3.7 kJ/mol, respectively), except for the binary complex of POS-caffeine (25.1 and 10.7 kJ/mol, respectively). Based on the molecular geometry results, the hydrogen bond length and angle correlated well with the interaction energies. Meanwhile, the POS-caffeine complex with two higher and almost linear bond angles showed higher binding and interaction energies as compared to the other methylxanthines. Therefore, a donor-acceptor analysis showed that the hydrogen bond strength was proven using the molecular electrostatic potential (MEP), which resulted in parallel outcomes. The research results were believed to be one of the factors that contributed to the rheological behaviour and sensory perception of cocoa products, especially chocolate.

Sign in / Sign up

Export Citation Format

Share Document