Optimization of uranyl ions removal from aqueous solution by natural and modified kaolinites

2017 ◽  
Vol 105 (8) ◽  
Author(s):  
O. A. Elhefnawy ◽  
A. A. Elabd
Keyword(s):  
Aqueous Solutions ◽  
Effect Of Temperature ◽  
Acid Activation ◽  
Uranyl Ions ◽  
Order Model ◽  
Efficient Removal ◽  
Removal Process ◽  
Modification Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

AbstractThe paper addresses the modifications of the most common mineral clay “kaolinite” for U(VI) removal from aqueous solutions. A new modified Egyptian natural kaolinite (Ca-MK) was prepared by coating kaolinite with calcium oxide. Another modification process was utilized by calcination and acid activation of kaolinite (E-MK). The Egyptian natural kaolinite (E-NK) and the two modified kaolinites were characterized by different techniques SEM, EDX, XRD, and FTIR. The removal process were investigated in batch experiments as a function of pH, contact time, initial U(VI) concentration, effect of temperature, and recovery of U(VI) were studied. The equilibrium stage was achieved after 60 min and the kinetic data was described well by pseudo-second order model. Isothermal data was better described by the Langmuir isotherm model, indicating the homogeneous removal process. Also the removal process was studied on different temperature 293, 313, and 323 K. The thermodynamic parameters ΔH°, ΔS°, and ΔG° were calculated. The thermodynamic results pointed to the endothermic and favorable nature of the U(VI) removal process in the three kaolinite adsorbents. This study indicated that (Ca-MK) has higher CEC and can be used as a new adsorbent for highly efficient removal of U(VI) from aqueous solutions.

scholarly journals Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1437
Author(s):  
Chih Ming Ma ◽  
Bo-Yuan Yang ◽  
Gui-Bing Hong
Keyword(s):  
Aqueous Solutions ◽  
Selective Adsorption ◽  
Order Model ◽  
Anionic Dyes ◽  
Adsorption Selectivity ◽  
Hydrogel Beads ◽  
Batch System ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Natural silica sand modified by calcium oxide as a new adsorbent for uranyl ions removal from aqueous solutions

2017 ◽  
Vol 105 (10) ◽  
Author(s):  
O. A. Elhefnawy ◽  
A. A. Elabd
Keyword(s):  
Aqueous Solutions ◽  
Calcium Oxide ◽  
Silica Sand ◽  
Uranyl Ions ◽  
Temperature Dependent ◽  
Analysis Techniques ◽  
Adsorption Data ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

AbstractCalcium oxide modified El-Zafarana silica sand (CMZS) was prepared as a new adsorbent for U(VI) removal from aqueous solutions in a series of batch experiments. The new adsorbent CMZS was characterized by different analysis techniques SEM, EDX, XRD, and FTIR. The influence of many parameters on the removal process like; effect of pH, contact time, U(VI) initial concentration and temperature on U(VI) removal were investigated. Kinetic experiments showed that U(VI) removal on CMZS followed pseudo-second-order kinetics model appropriately and the equilibrium data agreed well with the Langmuir isotherm model. Kinetics and isothermal data reveal the chemisorption process of U(VI) on CMZS. The thermodynamic parameters (ΔH°, ΔS°, ΔG°) were evaluated from temperature dependent adsorption data and the U(VI) removal on CMZS was found to be endothermic and spontaneous in nature. U(VI) desorption from CMZS was studied by a simple acid treatment. The results indicate that CMZS is an effective adsorbent for U(VI) from aqueous solutions.

Biosorption of As(V) from aqueous solutions by living cells of Bacillus cereus

2012 ◽  
Vol 66 (8) ◽  
pp. 1699-1707 ◽  
Author(s):  
A. K. Giri ◽  
R. K. Patel ◽  
P. C. Mishra
Keyword(s):  
Aqueous Solutions ◽  
Bacillus Cereus ◽  
Contact Time ◽  
Living Cells ◽  
Optimum Conditions ◽  
Order Model ◽  
Initial Concentration ◽  
Pseudo Second Order ◽  
Biomass Dosage ◽  
Batch Biosorption

In this work, the biosorption of As(V) from aqueous solutions by living cells of Bacillus cereus has been reported. The batch biosorption experiments were conducted with respect to biosorbent dosage 0.5 to 15 g/L, pH 2 to 9, contact time 5 to 90 min, initial concentration 1 to 10 mg/L and temperature 10 to 40 °C. The maximum biosorption capacity of B. cereus for As(V) was found to be 30.04 at pH 7.0, at optimum conditions of contact time of 30 min, biomass dosage of 6 g/L, and temperature of 30 ± 2 °C. Biosorption data were fitted to linearly transformed Langmuir isotherms with R2 (correlation coefficient) >0.99. Bacillus cereus cell surface was characterized using AFM and FTIR. The metal ions were desorbed from B. cereus using both 1 M HCl and 1 M HNO3. The pseudo-second-order model was successfully applied to predict the rate constant of biosorption.

scholarly journals Adsorption of strontium on different sodium-enriched bentonites

2017 ◽  
Vol 82 (4) ◽  
pp. 449-463 ◽  
Author(s):  
Sanja Marinovic ◽  
Marija Ajdukovic ◽  
Natasa Jovic-Jovicic ◽  
Tihana Mudrinic ◽  
Bojana Nedic-Vasiljevic ◽  
...  
Keyword(s):  
Cation Exchange ◽  
Adsorption Capacity ◽  
Textural Properties ◽  
X Ray Diffraction ◽  
Order Model ◽  
Surface Areas ◽  
Alkaline Conditions ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Range

Bentonites from three different deposits (Wyoming, TX, USA and Bogovina, Serbia) with similar cation exchange capacities were sodium enriched and tested as adsorbents for Sr2+ in aqueous solutions. X-Ray diffraction analysis confirmed successful Na-exchange. The textural properties of the bentonite samples were determined using low-temperature the nitrogen physisorption method. Significant differences in the textural properties between the different sodium enriched bentonites were found. Adsorption was investigated with respect to adsorbent dosage, pH, contact time and the initial concentration of Sr2+. The adsorption capacity increased with pH. In the pH range from 4.0?8.5, the amount of adsorbed Sr2+ was almost constant but 2?3 times smaller than at pH ?11. Further experiments were performed at the unadjusted pH since extreme alkaline conditions are environmentally hostile and inapplicable in real systems. The adsorption capacity of all the investigated adsorbents toward Sr2+ was similar under the investigated conditions, regardless of significant differences in the specific surface areas. It was shown and confirmed by the Dubinin?Radushkevich model that the cation exchange mechanism was the dominant mechanism of Sr2+ adsorption. Their developed microporous structures contributed to the Sr2+ adsorption process. The adsorption kinetics obeyed the pseudo-second-order model. The isotherm data were best fitted with the Langmuir isotherm model.

scholarly journals Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies

2012 ◽  
Vol 14 (2) ◽  
pp. 1-8 ◽  
Author(s):  
S. Ghadiri ◽  
R. Nabizadeh ◽  
A. Mahvi ◽  
S. Nasseri ◽  
A. Mesdaghinia ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Methyl Tert Butyl Ether ◽  
Bet Surface Area ◽  
Promising Technique ◽  
Order Model ◽  
Butyl Ether ◽  
Sorption Data ◽  
Adsorption Capacities ◽  
Effective Performance ◽  
Pseudo Second Order

Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies Adsorption of methyl tert-butyl ether (MTBE) from aqueous solutions by granulated modified nanozeolites Y was investigated. Nanozeolite Y powders were converted into granulated zeolites and subsequently modified with two cationic surfactants (20 mmol/dm3), to be used as adsorbent. Granulated nanozeolites were characterized by BET surface area analysis, elemental analysis and X-ray diffractometer. -Hexade-cyltrimethylammonium (HDTMA-Cl) modified granulated zeolite had more effective performance than N-cetylpyridinium bromide (CPB) modified granulated zeolite. The most conventional adsorption isotherms and kinetic models were applied to describe MTBE adsorption and reaction dynamic, respectively. The equilibrium sorption data fitted the Langmuir 2 isotherm model and the kinetic study was followed the pseudo-second-order model. The maximum adsorption capacities for HDTMA-Cl modified zeolite and CPB modified granulated zeolite were 333.33 and 142.8 mg/g, respectively as calculated by the Langmuir model. This study demonstrated that the removal of mtbe by granulated modified nanozeolites Y is a promising technique.

Preparation of bio-based magnetic adsorbent and application for efficient removal of Cd(II) from water

2018 ◽  
Vol 77 (5) ◽  
pp. 1313-1323 ◽  
Author(s):  
Jianjun Zhou ◽  
Xionghui Ji ◽  
Xiaohui Zhou ◽  
Jialin Ren ◽  
Yaochi Liu
Keyword(s):  
Aqueous Solution ◽  
Adsorption Process ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Magnetic Adsorbent ◽  
Order Model ◽  
Efficient Removal ◽  
Adsorption Ability ◽  
Adsorption Sites ◽  
Pseudo Second Order

Abstract A novel magnetic bio-adsorbent (MCIA) was developed, characterized and tested for its Cd(II) removal from aqueous solution. MCIA could be easily separated from the solution after equilibrium adsorption due to its super-paramagnetic property. The functional and magnetic bio-material was an attractive adsorbent for the removal of Cd(II) from aqueous solution owing to the abundant adsorption sites, amino-group and oxygen-containing groups on the surface of Cyclosorus interruptus. The experimental results indicated that the MCIA exhibited excellent adsorption ability and the adsorption process was spontaneous and endothermic. The adsorption isotherm was consistent with the Langmuir model. The adsorption kinetic fitted the pseudo-second-order model very well. The maximum adsorption capacity of Cd(II) onto MCIA was 40.8, 49.4, 54.6 and 56.6 mg/g at 293, 303, 313 and 323 K, respectively. And the MCIA exhibited an excellent reusability and impressive regeneration. Therefore, MCIA could serve as a sustainable, efficient and low-cost magnetic adsorbent for Cd(II) removal from aqueous solution.

scholarly journals Recovery of phosphate from aqueous solution by magnetically recycled modified polishing powder composites

2019 ◽  
Vol 80 (7) ◽  
pp. 1357-1366
Author(s):  
Jianming Liu ◽  
Runying Bai ◽  
Junfeng Hao ◽  
Bowen Song ◽  
Yu Zhang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Ligand Exchange ◽  
Adsorption Process ◽  
High Adsorption ◽  
Order Model ◽  
Powder Composites ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ph Level ◽  
Adsorption Desorption

Abstract This study investigated a magnetically recycled modified polishing powder (CMIO@PP) as an adsorbent of phosphate; the CMIO@PP was synthesized by combining the modified La/Ce-containing waste polishing powder with CaO2-modified Fe3O4 (CMIO). Results indicate that the CMIO@PP nanocomposite presents a crystal structure comprising La (OH)3, Ce (OH)3, and Fe3O4, and that CMIO is uniformly dispersed in the modified polishing powder. The CMIO@PP (1:3) is a suitable choice considering its magnetism and adsorption capacity. The magnetic adsorbent exhibits a high adsorption capacity of 53.72 mg/g, a short equilibrium time of 60 min, and superior selectivity for phosphate. Moreover, the adsorbent strongly depends on the pH during the adsorption process and maintains a large adsorption capacity when the pH level is between 2 and 6. The adsorption of phosphate by the CMIO@PP (1:3) accords with the Langmuir isotherm model, and the adsorption process follows the pseudo-second order model. Meanwhile, adsorption–desorption experiments show that the adsorbent could be recycled a few times and that a high removal efficiency of phosphate from civil wastewater was achieved. Finally, mechanisms show that the adsorption of phosphate by the CMIO@PP (1:3) is mainly caused by electrostatic attraction and ligand exchange.

Adsorption of Methylene Blue on Modified Bentonite

2013 ◽  
Vol 726-731 ◽  
pp. 2380-2383
Author(s):  
Li Xia Li ◽  
Xin Dong Zhai
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Freundlich Isotherm ◽  
Batch Process ◽  
Experimental Results ◽  
Order Model ◽  
Modified Bentonite ◽  
Equilibrium Data ◽  
Pseudo Second Order

Modified bentonite was used as adsorbent for the methylene blue adsorption in a batch process. Experimental results show that the adsorption kinetics is well described by pseudo-second-order model and the equilibrium data was better represented by the Freundlich isotherm model. The results revealed that the modified bentonite has the potential to be used as a good adsorbent for the removal of methylene blue from aqueous solutions.

Graphene-Based Nanocomposites for Enhanced Pb2+ Adsorption

2017 ◽  
Vol 13 ◽  
pp. 323-329 ◽  
Author(s):  
Anastasiya E. Kucherova ◽  
Irina V. Romantsova ◽  
Alexandr E. Burakov ◽  
Nariman R. Memetov ◽  
Mikhail N. Krasnyansky
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Kinetic Data ◽  
Adsorption Equilibrium ◽  
Intercalation Compound ◽  
Expanded Graphite ◽  
Graphite Intercalation Compound ◽  
Order Model ◽  
Graphite Intercalation ◽  
Pseudo Second Order

The present paper describes an investigation of the adsorption of lead ions (Pb2+) on graphene-based nanocomposites obtained via exfoliation of hydrolyzed expanded graphite intercalation compound. Three types of these nanocomposites - suspension of graphene nanoplatelets (SGN), paste of multi-layered oxidized graphene (PMOG), and paste of few-layered oxidized graphene (PFOG) - were used to extract Pb2+ from 1,040 mg L-1 aqueous solutions of Pb (NO3)2, and the kinetic of the Pb2+ adsorption was studied. It was found that the kinetic data are best fitted by the pseudo-second-order model. The adsorption equilibrium was achieved within 30 min under normal conditions. The maximum Pb2+ adsorption capacity of SGN, PMOG and PFOG was found to be 457, 103 and 38 mg g-1, respectively. Considering the obtained results, it can be assumed that the phenolic and hydroxyl oxygen-containing functional groups located at the surface of the adsorption materials under study play an important role in the Pb2+ removal process.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

2014 ◽  
Vol 70 (1) ◽  
pp. 102-107 ◽  
Author(s):  
Caroline Trevisan Weber ◽  
Gabriela Carvalho Collazzo ◽  
Marcio Antonio Mazutti ◽  
Edson Luiz Foletto ◽  
Guilherme Luiz Dotto
Keyword(s):  
Aqueous Solutions ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Application Range ◽  
First Order ◽  
Adsorption Capacities ◽  
Effects Of Ph ◽  
Pseudo Second Order ◽  
Papaya Seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180–200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g−1 for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document