The diffusion of 75Se(IV) in Beishan granite – temperature, oxygen condition and ionic strength effects

2018 ◽  
Vol 107 (1) ◽  
pp. 39-54
Author(s):  
Chunli Wang ◽  
Xiaoyu Yang ◽  
Jiangang He ◽  
Fangxin Wei ◽  
Zhong Zheng ◽  
...  
Keyword(s):  
Ionic Strength ◽  
Effective Diffusion ◽  
Aerobic Condition ◽  
Double Layers ◽  
Solution Viscosity ◽  
Formation Factor ◽  
Experimental Conditions ◽  
Beishan Granite ◽  
Oxygen Condition ◽  
The Difference

Abstract To explore the diffusion behavior of 75Se(IV) in Beishan granite (BsG), the influences of temperature, oxygen condition and ionic strength were investigated using the through-diffusion experimental method. The effective diffusion coefficient De of 75Se(IV) in BsG varied from 4.21×10−14 m2/s to 3.19×10−13 m2/s in our experimental conditions, increased with increasing temperature. The formation factor Ff of BsG was calculated to be nearly constant in the range of temperatures investigated, suggesting that the inner structure of BsG had no significant change in the temperature range of 20–55°C. Meanwhile, the De values of 75Se(IV) in BsG under anaerobic condition was significantly larger than that under aerobic condition, which may be attributed to the difference in the sorption characteristics and species distribution of Se and pH values. Moreover, the diffusion of 75Se(IV) was promoted with ionic strength increased from 0.01 M to 0.1 M, and then decreased at 0.5 M, mainly due to the combined effects of reduced double layers with increased ionic strength and increase of the solution viscosity at higher ionic strength.

scholarly journals Potential Pitfalls in Membrane Fouling Evaluation: Merits of Data Representation as Resistance Instead of Flux Decline in Membrane Filtration

Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 460
Author(s):  
Bastiaan Blankert ◽  
Bart Van der Bruggen ◽  
Amy E. Childress ◽  
Noreddine Ghaffour ◽  
Johannes S. Vrouwenvelder
Keyword(s):  
Membrane Fouling ◽  
Membrane Filtration ◽  
Data Representation ◽  
Strong Impact ◽  
Experimental Conditions ◽  
Permeable Membrane ◽  
Dead End ◽  
Flux Decline ◽  
The Difference ◽  
Filtration Flux

The manner in which membrane-fouling experiments are conducted and how fouling performance data are represented have a strong impact on both how the data are interpreted and on the conclusions that may be drawn. We provide a couple of examples to prove that it is possible to obtain misleading conclusions from commonly used representations of fouling data. Although the illustrative example revolves around dead-end ultrafiltration, the underlying principles are applicable to a wider range of membrane processes. When choosing the experimental conditions and how to represent fouling data, there are three main factors that should be considered: (I) the foulant mass is principally related to the filtered volume; (II) the filtration flux can exacerbate fouling effects (e.g., concentration polarization and cake compression); and (III) the practice of normalization, as in dividing by an initial value, disregards the difference in driving force and divides the fouling effect by different numbers. Thus, a bias may occur that favors the experimental condition with the lower filtration flux and the less-permeable membrane. It is recommended to: (I) avoid relative fouling performance indicators, such as relative flux decline (J/J0); (II) use resistance vs. specific volume; and (III) use flux-controlled experiments for fouling performance evaluation.

scholarly journals The Effect of pH, Ionic Strength and the Presence of PbII on the Formation of Calcium Carbonate from Homogenous Alkaline Solutions at Room Temperature

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 783
Author(s):  
Fulvio Di Lorenzo ◽  
Kay Steiner ◽  
Sergey V. Churakov
Keyword(s):  
Ionic Strength ◽  
Deep Understanding ◽  
Inhibitory Effect ◽  
Alkaline Solutions ◽  
Nucleation Kinetics ◽  
Experimental Conditions ◽  
Calcium Carbonates ◽  
Natural Systems ◽  
Geological Processes ◽  
System Variables

Precipitation of calcium carbonates in aqueous systems is an important factor controlling various industrial, biological, and geological processes. In the first part of this study, the well-known titration approach introduced by Gebauer and coworkers in 2008 s used to obtain reliable experimental dataset for the deep understanding of CaCO3 nucleation kinetics in supersaturated solutions over a broad range of pH and ionic strength conditions. In the second part, the effect of impurities, i.e., 1 mol% of Pb2+, was assessed in the same range of experimental conditions. Divalent lead has been shown to have an inhibitory effect in all ranges of the conditions tested except for pH 8 and low ionic strength (≤0.15 mol/L). Future investigations might take advantage of the methodology and the data provided in this work to investigate the effect of other system variables. The investigation of all the major variables and the assessment of eventual synergic effects could improve our ability to predict the formation of CaCO3 in complex natural systems.

scholarly journals Validation of a Method Based on Triglycerides for the Detection of Low Percentages of Hazelnut Oil in Olive Oil by Column Liquid Chromatography

2007 ◽  
Vol 90 (5) ◽  
pp. 1346-1353 ◽  
Author(s):  
Diego L García-González ◽  
María Viera-Macías ◽  
Ramón Aparicio-Ruiz ◽  
Maria T Morales ◽  
Ramón Aparicio
Keyword(s):  
Liquid Chromatography ◽  
Olive Oil ◽  
Carbon Number ◽  
Hazelnut Oil ◽  
Equivalent Carbon Number ◽  
Experimental Conditions ◽  
Mathematical Algorithm ◽  
Relative Standard ◽  
Triglyceride Content ◽  
The Difference

Abstract The difference between theoretical and empirical triglyceride content is a powerful tool to detect the presence of any vegetable oil in olive oil. The current drawback of the method is the separation between equivalent carbon number ECN42 compounds, which affects the reliability of the method and, hence, its cutoff limit. The determination of the triglyceride profile by liquid chromatography using propionitrile as the mobile phase has recently been proposed to improve their quantification, together with a mathematical algorithm whose binary response determines the presence or absence of hazelnut oil. Twenty-one laboratories from 9 countries participated in an interlaboratory study to evaluate the performance characteristics of the whole analytical method. Participants analyzed 12 samples in duplicate, split into 3 intercomparison studies. Statistically significant differences due to the experimental conditions were found in some laboratories, which were detected as outliers by use of Cochran's and Grubbs' tests. The relative standard deviations (RSD) for repeatability and reproducibility were determined following the AOAC Guidelines for Collaborative Studies. The analytical properties of the method were determined by means of the sensitivity (0.86), selectivity (0.94), and reliability (72) for a cutoff limit of 8 (probability 94).

scholarly journals Alpha EEG Frontal Asymmetries during Audiovisual Perception in Cochlear Implant Users

2015 ◽  
Vol 54 (06) ◽  
pp. 500-504 ◽  
Author(s):  
A. G. Maglione ◽  
A. Scorpecci ◽  
P. Malerba ◽  
P. Marsella ◽  
S. Giannantonio ◽  
...  
Keyword(s):  
Cochlear Implant ◽  
Alpha Rhythm ◽  
Normal Hearing ◽  
Experimental Conditions ◽  
Audiovisual Perception ◽  
Audiovisual Stimuli ◽  
The Difference ◽  
Eeg Alpha ◽  
The One ◽  
Hearing Children

SummaryObjectives: The aim of the present study is to investigate the variations of the electroencephalographic (EEG) alpha rhythm in order to measure the appreciation of bilateral and unilateral young cochlear implant users during the observation of a musical cartoon. The cartoon has been modified for the generation of three experimental conditions: one with the original audio, another one with a distorted sound and, finally, a mute version.Methods: The EEG data have been recorded during the observation of the cartoons in the three experimental conditions. The frontal alpha EEG imbalance has been calculated as a measure of motivation and pleasantness to be compared across experimental populations and conditions.Results: The EEG frontal imbalance of the alpha rhythm showed significant variations during the perception of the different cartoons. In particular, the pattern of activation of normal-hearing children is very similar to the one elicited by the bilateral implanted patients. On the other hand, results related to the unilateral subjects do not present significant variations of the imbalance index across the three cartoons.Conclusion: The presented results suggest that the unilateral patients could not appreciate the difference in the audio format as well as bilaterally implanted and normal hearing subjects. The frontal alpha EEG imbalance is a useful tool to detect the differences in the appreciation of audiovisual stimuli in cochlear implant patients.

Electromigration of Charged Polystyrene Beads Through Silicon Nanopores Filled With Low Ionic Strength Solutions

2009 ◽  
Author(s):  
Punarvasu Joshi ◽  
Trupthi Mathew ◽  
Leo Petrossian ◽  
Shalini Prasad ◽  
Michael Goryll ◽  
...  
Keyword(s):  
Ionic Strength ◽  
Double Layers ◽  
Electric Double Layers ◽  
Ionic Solution ◽  
Polystyrene Beads ◽  
Detailed Statistical Analysis ◽  
Charge Interaction ◽  
Pass Through ◽  
Low Ionic Strength ◽  
Bulk Behavior

In this work we present preliminary results demonstrating the influence of electrical double layer overlap on the electromigration of polystyrene beads (PSB) through an array of 25 cylindrical nanopores. Each of the cylindrical nanopores of the array used in this study is 360nm long with a diameter of 90nm. We observe frequent Coulter events for solutions of higher ionic strength and absence of Coulter events at low ionic strength solution. At higher ionic strengths, the electric double layers in the nanopore are thin and ion transport through the nanopore follows the bulk behavior of the ionic solution. For solutions of lower ionic strength, the electric double layers are comparable to the nanopore dimensions and start to overlap, suggesting surface charge interaction with the polystyrene beads that pass through the nanopore. The work continues towards detailed statistical analysis of the characteristic events observed for different concentrations.

scholarly journals Iodination of insulin in aqueous and organic solvents

1969 ◽  
Vol 115 (1) ◽  
pp. 11-18 ◽  
Author(s):  
A. Massaglia ◽  
U. Rosa ◽  
G. Rialdi ◽  
C. A. Rossi
Keyword(s):  
Ethylene Glycol ◽  
Organic Solvents ◽  
Molecular Conformation ◽  
Aqueous Media ◽  
Native Structure ◽  
Experimental Conditions ◽  
Polar Environment ◽  
Polar Area ◽  
The Difference ◽  
A Chain

1. The iodination of insulin was studied under various experimental conditions in aqueous media and in some organic solvents, by measuring separately the uptake of iodine by the four tyrosyl groups and the relative amounts of monoiodotyrosine and di-iodotyrosine that are formed. In aqueous media from pH1 to pH9 the iodination occurs predominantly on the tyrosyl groups of the A chain. Some organic solvents increase the iodine uptake of the B-chain tyrosyl groups. Their efficacy in promoting iodination of Tyr-B-16 and Tyr-B-26 is in the order: ethylene glycol and propylene glycol≃methanol and ethanol>dioxan>8m-urea. 2. It is suggested that each of the four tyrosyl groups in insulin has a different environment: Tyr-A-14 is fully exposed to the solvent; Tyr-A-19 is sterically influenced by the environmental structure, possibly by the vicinity of a disulphide interchain bond; Tyr-B-16 is embedded into a non-polar area whose stability is virtually independent of the molecular conformation; Tyr-B-26 is probably in a situation similar to Tyr-B-16 with the difference that its non-polar environment depends on the preservation of the native structure.

scholarly journals Speciation Studies of L-Histidine Complexes of Pb(II), Cd(II), and Hg(II) in DMSO-Water Mixtures

2012 ◽  
Vol 2012 ◽  
pp. 1-9
Author(s):  
K. Bharath Kumar Naik ◽  
B. Ananda Kumar ◽  
S. Raju ◽  
G. Nageswara Rao
Keyword(s):  
Dielectric Constant ◽  
Ionic Strength ◽  
Complex Formation ◽  
Species Distribution ◽  
Statistical Parameters ◽  
Experimental Conditions ◽  
Equilibrium Study ◽  
Predominant Species ◽  
Chemical Models ◽  
Best Fit

Equilibrium study on complex formation of L-histidine with Pb(II), Cd(II), and Hg(II) has been investigated pH metrically in DMSO-water mixtures (0–60% v/v) at 303 K and 0.16 mol L−1 ionic strength. The predominant species detected for Pb(II) and Cd(II) are ML2H4, ML2H3, ML2H2, ML2H, and ML2 and those for Hg(II) are ML2H4, ML2H3, ML2, and ML. The appropriateness of experimental conditions is verified by introducing errors intentionally in the concentrations of ingredients. The models containing different numbers of species were refined by using the computer program MINIQUAD75. The best-fit chemical models were arrived at based on statistical parameters. The trend in variation of stability constants of the complexes with dielectric constant of the medium is attributed to the electrostatic and nonelectrostatic forces. The species distribution and the plausible equilibria for the formation of the species are also presented.

Expansion of hot plasma with Kappa distribution in coronal flare sources

2021 ◽  
Author(s):  
Jan Benáček ◽  
Marian Karlický
Keyword(s):  
Langmuir Wave ◽  
Maxwellian Distribution ◽  
Double Layers ◽  
Kappa Distribution ◽  
One Dimensional ◽  
X Ray ◽  
Particle In Cell ◽  
Hot Plasma ◽  
The Difference ◽  
Field Lines

<p>We study how hot plasma that is released during a solar flare can be confined in its source and interact with surrounding colder plasma. The X-ray emission of coronal flare sources is well explained using Kappa velocity distribution. Therefore, we compare the difference in the confinement of plasma with Kappa and Maxwellian distribution. We use a 3D Particle-in-Cell code, which is large along magnetic field lines, effectively one-dimensional, but contains all electromagnetic effects. In the case with Kappa distribution, contrary to Maxwellian distribution, we found formation of several thermal fronts associated with double-layers that suppress particle fluxes. As the Kappa distribution of electrons forms an extended tail, more electrons are not confined by the first front and cause formation of multiple fronts. A beam of electrons from the hot part is formed at each front; it generates return current, Langmuir wave density depressions, and a double layer with a higher potential step than in the Maxwellian case. We compare the Kappa and Maxwellian cases and discuss how these processes could be observed.</p>

scholarly journals Modeling and thermodynamic properties of ‘bacaba’ pulp drying

2019 ◽  
Vol 23 (9) ◽  
pp. 702-708 ◽  
Author(s):  
Maria F. de Morais ◽  
José R. O. dos Santos ◽  
Marisângela P. dos Santos ◽  
Dyego da C. Santos ◽  
Tiago N. da Costa ◽  
...  
Keyword(s):  
Activation Energy ◽  
Thermodynamic Properties ◽  
Diffusion Coefficients ◽  
Effective Diffusion ◽  
Thermal Conditions ◽  
Drying Process ◽  
Experimental Conditions ◽  
Effective Diffusion Coefficients ◽  
Drying Rates ◽  
Increasing Temperature

ABSTRACT This study aimed to dry ‘bacaba’ (Oenocarpus bacaba Mart.) pulp under different thermal conditions, fit different mathematical models to the dehydration curves, and calculate the diffusion coefficients, activation energy and thermodynamic properties of the process. ‘Bacaba’ fruits were meshed to obtain the pulp, which was dried at temperatures of 40, 50 and 60 °C and with thickness of 1.0 cm. Increase in drying temperature reduced the dehydration times, as well as the equilibrium moisture contents, and drying rates of 0.65, 1.04 and 1.25 kg kg min-1 were recorded at the beginning of the process for temperatures of 40, 50 and 60 °C, respectively. The Midilli’s equation was selected as the most appropriate to predict the drying phenomenon, showing the highest R2, lowest values of mean square deviation (MSD) and χ2 under most thermal conditions, and random distribution of residuals under all experimental conditions. The effective diffusion coefficients increased with increasing temperature, with magnitudes of the order of 10-9 m2 s-1, being satisfactorily described by the Arrhenius equation, which showed activation energy (Ea) of 37.01 kJ mol-1. The drying process was characterized as endergonic, in which enthalpy (ΔH) and entropy (ΔS) reduced with the increment of temperature, while Gibbs free energy (ΔG) was increased.

scholarly journals Impact of Modeling Simplifications on Lightning Strike Simulation for Aeroengine

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Yi-fan Qian ◽  
Zhi-feng Ye ◽  
Hai-bo Zhang
Keyword(s):  
Simulation Analysis ◽  
Simulation Software ◽  
Simplified Model ◽  
Lightning Strike ◽  
Electromagnetic Simulation ◽  
Experimental Conditions ◽  
Turbofan Engine ◽  
Engine Model ◽  
Simulation Results ◽  
The Difference

With the development of electromagnetic simulation software and affordable hardware, it is allowed for us to complete simulations for EMC purposes. However, simulation demands will be immense when simulations for models with complex structures, especially aircraft components, have to be solved. Hence, it is meaningful to investigate how to minimize the computational demands. One of the solutions to reduce the simulation expense is the simplification for the simulated model. But the simplified model should be guaranteed to provide credible simulation results which do not deviate from the original model apparently. Generally, the difference between the simulation results and experimental data is estimated, or if the experimental conditions are not achieved, the comparison between the simplified model and the original one has to be analyzed, at least. This paper explores the electromagnetic simulation of a turbofan engine encountering lightning strike. With the simplifications of different components on the turbofan engine, the influences on induced currents of engine controller cables are simulated and analyzed based on the transmission-line matrix method. A combining method of components removal and geometric structure simplification is proposed to simplify the whole engine model. Simplified components include compressor, combustion chamber, turbine, and nozzle. The effects of different simplification methods are quantified, and the rationality of the simplified model is verified by simulation analysis.

Sign in / Sign up

Export Citation Format

Share Document