scholarly journals ARQUEOMETRIA APLICADA À CONSERVAÇÃO DO PATRIMÔNIO ARQUEOLÓGICO METÁLICO: UM ESTUDO DE CASO DO SÍTIO FUNERÁRIO DE SÃO GONÇALO GARCIA, RIO DE JANEIRO

2018 ◽  
Vol 15 (30) ◽  
pp. 290
Author(s):  
Guadalupe Do Nascimento Campos ◽  
Marcus Granato ◽  
Antonieta Middea ◽  
Ricardo Tadeu Lopes
Keyword(s):  
Rio De Janeiro ◽  
Metallic Phase ◽  
X Ray Diffraction ◽  
Archaeological Heritage ◽  
X Ray ◽  
Naked Eye ◽  
Archaeological Objects ◽  
Scanning Electron

O presente trabalho apresenta alguns dos resultados obtidos no âmbito do projeto de pesquisa Conservação e Caracterização Microanalítica de Objetos Arqueológicos Metálicos, desenvolvido no Museu de Astronomia e Ciências Afins - MAST. O projeto tem como objetivo principal estabelecer metodologias de caracterização e conservação do patrimônio arqueológico metálico. Os artefatos selecionados para o estudo de caso são provenientes do Sítio Funerário da Igreja São Gonçalo Garcia (região central do Rio de Janeiro), relacionados aos séculos XVIII e XIX. Para os exames arqueométricos, foram empregadas as seguintes técnicas de caracterização: radiografia digital e microtomografia computadorizada de raios X, microscopias estereoscópica e eletrônica de varredura, espectroscopia de energia dispersiva (MEV/EDS) e difratometria de raios X. Foram obtidas informações sobre a composição dos artefatos (fase metálica e alguns produtos de corrosão), detalhes da morfologia em 3D não visíveis a olho nu, extensão da mineralização, dentre outros aspectos.  Abstract: This paper presents some of the achieved results in the "Microanalytical Conservation and Characterization of Metallic Archaeological Objects" research project, developed at the Museum of Astronomy and Related Sciences - MAST. The project's main goal is to establish methodologies for characterization and conservation of the metallic archaeological heritage. The artifacts selected for the case study are from the Funeral Site at São Gonçalo Garcia's Church (Rio de Janeiro's central region), related to the 18th and 19th centuries. For the archaeometric examinations, the following characterization techniques were employed: digital radiography and X ray microtomography, stereoscopic and scanning electron microscopy, energy-dispersive X ray spectroscopy (SEM / EDS) and X ray diffraction. Results were obtained about the artifacts's composition (metallic phase and some corrosion products), 3D morphology details invisible to the naked eye, and the extent of the mineralization, among other aspects.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of hydrofluoric acid treated Y–Ba–Cu–O oxides

1989 ◽  
Vol 4 (6) ◽  
pp. 1320-1325 ◽  
Author(s):  
Q. X. Jia ◽  
W. A. Anderson
Keyword(s):  
Hydrofluoric Acid ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Surface Passivation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zero Resistance ◽  
Reaction With Water ◽  
Scanning Electron

Effects of hydrofluoric acid (HF) treatment on the properties of Y–Ba–Cu–O oxides were investigated. No obvious etching of bulk Y–Ba–Cu–O and no degradation of zero resistance temperature were observed even though the oxides were placed into 49% HF solution for up to 20 h. Surface passivation of Y–Ba–Cu–O due to HF immersion was verified by subsequent immersion of Y–Ba–Cu–O in water. A thin layer of amorphous fluoride formed on the surface of the Y–Ba–Cu–O during HF treatment, which limited further reaction between Y–Ba–Cu–O and HF, and later reaction with water. Thin film Y–Ba–Cu–O was passivated by HF vapors and showed no degradation in Tc-zero after 30 min immersion in water. The properties of the surface layer of Y–Ba–Cu–O oxide after HF treatment are reported from Auger electron spectroscopy, x-ray diffraction, and scanning electron microscopy studies.

Isolation and characterization of lignocellulosic fiber from jute bast by the organic solvent degumming system: an alkali-free method

2021 ◽  
pp. 004051752110154
Author(s):  
Zhihui Qin ◽  
Shuyuan Zhao ◽  
Liu Liu ◽  
Zhaohe Shi ◽  
Longdi Cheng ◽  
...  
Keyword(s):  
National Standards ◽  
X Ray Diffraction ◽  
High Concentration ◽  
X Ray ◽  
Lignocellulosic Fibers ◽  
Lignocellulosic Fiber ◽  
Isolation And Characterization ◽  
Alkali Consumption ◽  
Scanning Electron

Degumming is the dominant method for insolating lignocellulosic fibers in textile applications. Traditional alkaline degumming (TAL), as a common method, requires a high-concentration alkali and has been a severe challenge to the environment. In the research reported here, the possibility of innovative jute degumming by organic solvents 1-2 propylene glycol and a combination of additive green oxygen (GO-OS) was studied. The results revealed that fibers could be extracted by this system (under condition of 0.9% GO-OS, 180°C, 120 min), and obtained fibers with higher breaking tenacity (7.1 cN/dtex), yield (65.7%), breaking elongation (2.87%) and residual gum (11.7%), which all meet the requirement of the relevant Chinese Textile National Standards. Notably, the required reaction time (120 min) of the GO-OS system was 180 min shorter than that of the TAL method. Furthermore, the modifications introduced by the degumming effect on physicochemical aspects were characterized and confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction. This study provides a promising degumming method for separating jute lignocellulose without acid and alkali consumption.

Characterization of a coating for radioprotection, by X-ray diffraction, scanning electron microscopy, and dispersive energy spectroscopy

2022 ◽  
Vol 321 ◽  
pp. 126326
Author(s):  
Gladis Aparecida Galindo Reisemberger de Souza ◽  
Ramón Sigifredo Cortés Paredes ◽  
Frieda Saicla Barros ◽  
Gustavo Bavaresco Sucharski ◽  
Sebastião Ribeiro Junior ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

scholarly journals Investigations of M3Al8O15:Eu3+,Dy3+ (M = Ba, Ca, Mg) phosphors

2016 ◽  
Vol 34 (2) ◽  
pp. 412-417
Author(s):  
Esra Öztürk
Keyword(s):  
Electron Microscopy ◽  
Solid State Reaction Method ◽  
Morphological Characterization ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Three Samples ◽  
Scanning Electron ◽  
The Eu

AbstractIn this work, aluminate type phosphorescence materials were synthesized via the solid state reaction method and the photoluminescence (PL) properties, including excitation and emission bands, were investigated considering the effect of trace amounts of activator (Eu3+) and co-activator (Dy3+). The estimated thermal behavior of the samples at certain temperatures (> 1000 °C) during heat treatment was characterized by differential thermal analysis (DTA) and thermogravimetry (TG). The possible phase formation was characterized by X-ray diffraction (XRD). The morphological characterization of the samples was performed by scanning electron microscopy (SEM). The PL analysis of three samples showed maximum emission bands at around 610 nm, and additionally near 589 nm, 648 nm and 695 nm. The bands were attributed to typical transitions of the Eu3+ ions.

Rapid Synthesis and Characterization of CuInS2 Prepared Using Microwave-Assisted Heating

2015 ◽  
Vol 775 ◽  
pp. 143-146
Author(s):  
Ming Kwen Tsai ◽  
Yueh Chien Lee ◽  
Chia Chih Huang ◽  
Sheng Yao Hu ◽  
Kwong Kau Tiong ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Rapid Synthesis ◽  
X Ray ◽  
Sem Image ◽  
Microwave Assisted ◽  
Calcination Treatment ◽  
Scanning Electron

In this work, the CuInS2 nanoparticles are successfully synthesized by microwave-assisted heating technique and further calcined at 400 °C. The morphological, structural, and optical properties of the synthesized CuInS2 nanoparticles are investigated by scanning electron microscope (SEM), X-ray diffraction (XRD), Raman scattering, and transmittance measurement, respectively. The SEM image shows the clear particle shape of the calcined CuInS2 nanoparticles. After calcination treatment, the fundamental (112) peak of the XRD spectrum and a broad Raman peak mixed with chalcopyrite and CuAu structures support the improved crystallinity of the calcined CuInS2 nanoparticles.

scholarly journals The Case Study of the Medieval Town Walls of Gubbio in Italy: First Results on the Characterization of Mortars and Binders

Heritage ◽  
2018 ◽  
Vol 1 (2) ◽  
pp. 468-478 ◽  
Author(s):  
Fernanda Carvalho ◽  
Andreia Lopes ◽  
Antonella Curulli ◽  
Teresa da Silva ◽  
Maria Lima ◽  
...  
Keyword(s):  
Polarized Light ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heritage Sites ◽  
First Results ◽  
Restoration Practices ◽  
Climate Events

Good conservation and restoration practices of cultural heritage assets rely on the knowledge of original materials. In the framework of the HERACLES Project (HERACLES—HEritage Resilience Against CLimate Events on Site, H2020 Grant Agreement 700395), dealing with the effects of climatic actions and natural hazards on built heritage, a set of important heritage sites are currently under study to improve their resilience against climate events. Among these are the medieval Gubbio Town Walls in Italy. The present work focuses on the mortars and binders of this monument and collected samples related to different parts of the Walls, corresponding to various historical periods of construction and interventions. They were characterized to determine their minerochemical composition, thermal behavior, and morphology. For that purpose, ex-situ laboratory techniques, such as X-ray diffraction (XRD), wavelength dispersive X-ray fluorescence (WDXRF), optical microscopy (OM), polarized light microscopy (PLM), scanning electron microscopy (SEM), and simultaneous differential thermal analysis and thermogravimetry (TG-DTA) were used to discern trends in different sampling areas due to construction/reconstruction periods and building techniques.

Sign in / Sign up

Export Citation Format

Share Document