scholarly journals Concentration and Size Effects in Electrophysical Properties of Thin Films Based on Permalloy and Silver

2020 ◽  
Vol 21 (2) ◽  
pp. 238-242
Author(s):  
I. M. Pazukha ◽  
D. O. Shuliarenko ◽  
O. V. Pylypenko ◽  
M. S. Оvrutskyi ◽  
L. V. Odnodvorets
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Size Effects ◽  
Phase State ◽  
Diffraction Method ◽  
Electrophysical Properties ◽  
Wide Composition Range ◽  
X Ray ◽  
Concentration Dependences ◽  
Evaporation Technique

Complex study of electrophysical properties (the electrical resistivity r and the temperature coefficient of resistance (TCR) b) of thin-film samples based on ferromagnetic alloy Ni80Fe20 (permalloy) and noble metal Ag in a wide composition range and within the range of thickness 20-100 nm done. Thin films were obtained by the method of electron-beam co-evaporation technique at room temperature. Their composition was investigated using the method of X-ray spectrometry. The phase state was analyzed by the electron diffraction method. It was demonstrated that the crystal structure of thin films stays unchanged during the annealing process to 500 K. The size and concentration dependences of r and b values were obtained. The corresponding maximum and minimum at the concentration of Ag atoms of 50-60 at.% observed at the dependences r(cAg) and b(cAg). Size dependences r(d) and b(d) associated with the size effects in thin-film materials.

Effects of Refraction and Reflection on Analysis of Thin Films by the Grazing-Incidence X-ray Diffraction Method

1989 ◽  
Vol 33 ◽  
pp. 109-120 ◽  
Author(s):  
Toru Takayama ◽  
Yoshiro Matsumoto
Keyword(s):  
Thin Films ◽  
Room Temperature ◽  
Diffraction Method ◽  
Grazing Incidence ◽  
X Ray Diffraction ◽  
Diffraction Intensity ◽  
X Ray ◽  
Evaporation Technique ◽  
Diffraction Peaks ◽  
Angular Shift

AbstractThe grazing-incidence X-ray diffraction (GIXD) method was employed to analyze two-layer thin films, which were the samples of Å lOO Å Au/500Å Cu/Si02(substrate) and 250Å Cu/500Å Au/SiO2(substrate), which were prepared by the evaporation technique under the condition that the SiO2substrate was at room temperature. Diffraction profiles were obtained at various glancing angles ( α ) and the data were analyzed as a function of α. The results were as follows : 1) Diffraction peaks were shifted to larger diffraction angles, because of the refraction of the incident X-ray beam. The angular shift has been approximated by the equation, α - α2- αc2)1/2, where αcis the total ref reflection critical angle of the material. 2) As a result of the correction of angular shift, the stress of the evaporated films was estimated to be null. 3) The broadening of the Cu diffraction peak and the enhancement of the Cu diffraction intensity occurred at angles near αcof Cu, due to the reflection of the X-ray beam at the Cu/Au interface.

Optical and valence band studies of ZnP2 thin films

1989 ◽  
Vol 4 (1) ◽  
pp. 185-188 ◽  
Author(s):  
V. Samuel ◽  
V. J. Rao
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Chemical Composition ◽  
Binding Energy ◽  
X Ray Diffraction ◽  
Flash Evaporation ◽  
X Ray ◽  
Direct Band Gap ◽  
Direct Band ◽  
Evaporation Technique

Conditions have been developed for the preparation of ZnP2 and deposition of its stoichiometric thin films, using the flash evaporation technique. Structural properties of the ZnP2 obtained have been studied using x-ray diffraction, and chemical composition has been established by the polarography technique. Optical absorption of thin films of β–ZnP2 has been investigated over the range 1.2–3.2 eV. Analysis of thin film data showed that β–ZnP2 is a direct band gap material. The XPS and UPS of β–ZnP2 show a shift in binding energy (BE), which is due to transfer of electrons from zinc to phosphorus.

Determination of Stoichiometry of GaAs Component in (Gaas)Ge Epitaxially Grown Thin Films by Electron Microprobe X-Ray Analysis

1990 ◽  
Vol 48 (2) ◽  
pp. 264-265
Author(s):  
D. R. Liu ◽  
S. S. Shinozaki ◽  
R. J. Baird
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Compound Semiconductors ◽  
Energy Dispersive Analysis ◽  
X Ray ◽  
Metastable Alloys ◽  
Lower Voltage

The epitaxially grown (GaAs)Ge thin film has been arousing much interest because it is one of metastable alloys of III-V compound semiconductors with germanium and a possible candidate in optoelectronic applications. It is important to be able to accurately determine the composition of the film, particularly whether or not the GaAs component is in stoichiometry, but x-ray energy dispersive analysis (EDS) cannot meet this need. The thickness of the film is usually about 0.5-1.5 μm. If Kα peaks are used for quantification, the accelerating voltage must be more than 10 kV in order for these peaks to be excited. Under this voltage, the generation depth of x-ray photons approaches 1 μm, as evidenced by a Monte Carlo simulation and actual x-ray intensity measurement as discussed below. If a lower voltage is used to reduce the generation depth, their L peaks have to be used. But these L peaks actually are merged as one big hump simply because the atomic numbers of these three elements are relatively small and close together, and the EDS energy resolution is limited.

Palladium Nanowire Thin Films via Template Growth

2003 ◽  
Vol 775 ◽  
Author(s):  
Donghai Wang ◽  
David T. Johnson ◽  
Byron F. McCaughey ◽  
J. Eric Hampsey ◽  
Jibao He ◽  
...  
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Conductive Substrate ◽  
Palladium Nanowires ◽  
Efficient Route ◽  
Silica Thin Film

AbstractPalladium nanowires have been electrodeposited into mesoporous silica thin film templates. Palladium continually grows and fills silica mesopores starting from a bottom conductive substrate, providing a ready and efficient route to fabricate a macroscopic palladium nanowire thin films for potentially use in fuel cells, electrodes, sensors, and other applications. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicate it is possible to create different nanowire morphology such as bundles and swirling mesostructure based on the template pore structure.

Structural and optical properties of Tin Oxide and Indium doped SnO2 thin films deposited by thermal evaporation technique

2016 ◽  
Vol 12 (3) ◽  
pp. 4394-4399
Author(s):  
Sura Ali Noaman ◽  
Rashid Owaid Kadhim ◽  
Saleem Azara Hussain
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Tin Oxide ◽  
Thermal Evaporation ◽  
Pure Sno2 ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
X Ray ◽  
Evaporation Technique ◽  
Sno2 Thin Films

Tin Oxide and Indium doped Tin Oxide (SnO2:In) thin films were deposited on glass and Silicon  substrates  by  thermal evaporation technique.  X-ray diffraction pattern of  pure SnO2 and SnO2:In thin films annealed at 650oC and the results showed  that the structure have tetragonal phase with preferred orientation in (110) plane. AFM studies showed an inhibition of grain growth with increase in indium concentration. SEM studies of pure  SnO2 and  Indium doped tin oxide (SnO2:In) ) thin films showed that the films with regular distribution of particles and they have spherical shape.  Optical properties such as  Transmission , optical band-gap have been measured and calculated.

Quantifying Multiple Crystallite Orientations and Crystal Heterogeneities in Complex Thin Film Materials

2019 ◽  
Author(s):  
Jonathan Ogle ◽  
Daniel Powell ◽  
Eric Amerling ◽  
Detlef Matthias Smilgies ◽  
Luisa Whittaker-Brooks
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Structural Design ◽  
Grazing Incidence ◽  
Crystallite Orientation ◽  
Miller Index ◽  
X Ray ◽  
X Ray Scattering ◽  
Orientation Distributions ◽  
Orientation Information

<p>Thin film materials have become increasingly complex in morphological and structural design. When characterizing the structure of these films, a crucial field of study is the role that crystallite orientation plays in giving rise to unique electronic properties. It is therefore important to have a comparative tool for understanding differences in crystallite orientation within a thin film, and also the ability to compare the structural orientation between different thin films. Herein, we designed a new method dubbed the mosaicity factor (MF) to quantify crystallite orientation in thin films using grazing incidence wide-angle X-ray scattering (GIWAXS) patterns. This method for quantifying the orientation of thin films overcomes many limitations inherent in previous approaches such as noise sensitivity, the ability to compare orientation distributions along different axes, and the ability to quantify multiple crystallite orientations observed within the same Miller index. Following the presentation of MF, we proceed to discussing case studies to show the efficacy and range of application available for the use of MF. These studies show how using the MF approach yields quantitative orientation information for various materials assembled on a substrate.<b></b></p>

scholarly journals Optoelectronic properties of highly porous silver oxide thin film

2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Ahmad Al-Sarraj ◽  
Khaled M. Saoud ◽  
Abdelaziz Elmel ◽  
Said Mansour ◽  
Yousef Haik
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Electron Microscope ◽  
Plasma Etching ◽  
Silver Oxide ◽  
Oxidation Time ◽  
Oxide Thin Film ◽  
X Ray ◽  
Porous Silver ◽  
Highly Porous

Abstract In this paper, we report oxidation time effect on highly porous silver oxide nanowires thin films fabricated using ultrasonic spray pyrolysis and oxygen plasma etching method. The NW’s morphological, electrical, and optical properties were investigated under different plasma etching periods and the number of deposition cycles. The increase of plasma etching and oxidation time increases the surface roughness of the Ag NWs until it fused to form a porous thin film of silver oxide. AgNWs based thin films were characterized using X-ray diffraction, scanning electron microscope, transmission electron microscope, X-ray photoemission spectroscopy, and UV–Vis spectroscopy techniques. The obtained results indicate the formation of mixed mesoporous Ag2O and AgO NW thin films. The Ag2O phase of silver oxide appears after 300 s of oxidation under the same conditions, while the optical transparency of the thin film decreases as plasma etching time increases. The sheet resistance of the final film is influenced by the oxidation time and the plasma application periodicity. Graphic abstract

scholarly journals X-ray Photoelectron Spectroscopy Analysis of Chitosan–Graphene Oxide-Based Composite Thin Films for Potential Optical Sensing Applications

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 478
Author(s):  
Wan Mohd Ebtisyam Mustaqim Mohd Daniyal ◽  
Yap Wing Fen ◽  
Silvan Saleviter ◽  
Narong Chanlek ◽  
Hideki Nakajima ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Functional Group ◽  
Optical Sensing ◽  
Composite Thin Films ◽  
Cobalt Ions ◽  
X Ray ◽  
Sensing Applications

In this study, X-ray photoelectron spectroscopy (XPS) was used to study chitosan–graphene oxide (chitosan–GO) incorporated with 4-(2-pyridylazo)resorcinol (PAR) and cadmium sulfide quantum dot (CdS QD) composite thin films for the potential optical sensing of cobalt ions (Co2+). From the XPS results, it was confirmed that carbon, oxygen, and nitrogen elements existed on the PAR–chitosan–GO thin film, while for CdS QD–chitosan–GO, the existence of carbon, oxygen, cadmium, nitrogen, and sulfur were confirmed. Further deconvolution of each element using the Gaussian–Lorentzian curve fitting program revealed the sub-peak component of each element and hence the corresponding functional group was identified. Next, investigation using surface plasmon resonance (SPR) optical sensor proved that both chitosan–GO-based thin films were able to detect Co2+ as low as 0.01 ppm for both composite thin films, while the PAR had the higher binding affinity. The interaction of the Co2+ with the thin films was characterized again using XPS to confirm the functional group involved during the reaction. The XPS results proved that primary amino in the PAR–chitosan–GO thin film contributed more important role for the reaction with Co2+, as in agreement with the SPR results.

Study of the quality of GaAs thin film on Si substrate by X-ray diffraction method

1990 ◽  
Vol 7 (7) ◽  
pp. 308-311
Author(s):  
Li Chaorong ◽  
Mai Zhenhong ◽  
Cui Shufan ◽  
Zhou Junming ◽  
Yutian Wang
Keyword(s):  
Thin Film ◽  
Diffraction Method ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
X Ray

Al1-x ScxN Thin Film Structures for Pyroelectric Sensing Applications

MRS Advances ◽  
2016 ◽  
Vol 1 (39) ◽  
pp. 2711-2716 ◽  
Author(s):  
V. Vasilyev ◽  
J. Cetnar ◽  
B. Claflin ◽  
G. Grzybowski ◽  
K. Leedy ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Pyroelectric Coefficient ◽  
X Ray Diffraction ◽  
Ir Detectors ◽  
Pyroelectric Properties ◽  
X Ray ◽  
Sensing Applications ◽  
Pyroelectric Material ◽  
Deposited Films

ABSTRACTAlN thin film structures have many useful and practical piezoelectric and pyroelectric properties. The potential enhancement of the AlN piezo- and pyroelectric constants allows it to compete with more commonly used materials. For example, combination of AlN with ScN leads to new structural, electronic, and mechanical characteristics, which have been reported to substantially enhance the piezoelectric coefficients in solid-solution AlN-ScN compounds, compared to a pure AlN-phase material.In our work, we demonstrate that an analogous alloying approach results in considerable enhancement of the pyroelectric properties of AlN - ScN composites. Thin films of ScN, AlN and Al1-x ScxN (x = 0 – 1.0) were deposited on silicon (004) substrates using dual reactive sputtering in Ar/N2 atmosphere from Sc and Al targets. The deposited films were studied and compared using x-ray diffraction, XPS, SEM, and pyroelectric characterization. An up to 25% enhancement was observed in the pyroelectric coefficient (Pc = 0.9 µC /m2K) for Sc1-xAlxN thin films structures in comparison to pure AlN thin films (Pc = 0.71 µC/m2K). The obtained results suggest that Al1-x ScxN films could be a promising novel pyroelectric material and might be suitable for use in uncooled IR detectors.

Sign in / Sign up

Export Citation Format

Share Document