Mathematical modeling of articulated passenger train spatial vibrations

2021 ◽  
Vol 2021 (2) ◽  
pp. 91-99
Author(s):  
O. Markova ◽  
◽  
H. Kovtun ◽  
V. Maliy ◽  
◽  
...  
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Dynamic Characteristics ◽  
High Speed ◽  
Ride Quality ◽  
Railway Transport ◽  
Passenger Train ◽  
Wide Range ◽  
Random Track Irregularities ◽  
The Mathematical Model

The problem of high-speed railway transport development is important for Ukraine. In many countries articulated trains are used for this purpose. As the connections between cars in such a train differ from each other, to investigate its dynamic characteristics not a separate car, but a full train vibrations model is necessary. The article is devoted to the development of the mathematical model for articulated passenger train spatial vibrations. The considered train consists of 7 cars: one motor-car, one transitional car, three articulated cars, one more transitional car and again one motor-car. Differential equations of the train motion along the track of arbitrary shape are set in the form of Lagrange’s equations of the second kind. All the necessary design features of the vehicles are taken into account. Articulated cars have common bogies with adjoining cars and a transfer car and the cars are united by the hinge. The operation of the central hinge between two cars is modeled using springs and dampers acting in the horizontal and vertical directions. Four dampers between two adjacent car-bodies act as dampers for pitching and hunting and are represented in the model by viscous damping. The system of 257 differential equations of the second order is set, which describes the articulated train motion along straight, curved, and transitional track segments with taking into account random track irregularities. On the basis of the obtained mathematical model the algorithm and computational software has been developed to simulate a wide range of cases including all possible combinations of parameters for the train elements and track technical state. The study of the train self-exited vibrations has shown the stable motion in all the range of the considered speeds (40 km/h – 180 km/h). The results obtained at the train motion along the track maintained for the speedy motion have shown that all the dynamic characteristics and ride quality index insure train safe motion and comfortable conditions for the travelling passengers.

scholarly journals Input shaping control of a flexible cantilever beam excited by a moving hub

2020 ◽  
Vol 3 (2) ◽  
pp. First
Author(s):  
Quoc Chi Nguyen ◽  
Nguyen Tri Giang Vu ◽  
Phuong Tung Pham
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Cantilever Beam ◽  
High Speed ◽  
Beam Theory ◽  
Flexible Beam ◽  
Structural Element ◽  
Unknown Parameters ◽  
The Mathematical Model

Introduction: A cantilever beam is a well-known structural element in engineering, which is only fixed at one end. This structure can be used to describe a manipulator, whose stiffness is large to ensure rigidity and stability of the system. A flexible cantilever beam provides a light-weight structure and high cost efficiency but generates vibration under high-speed positioning. In this paper, we aim to control the vibratory behavior of a flexible cantilever beam attached to a moving hub. Method: The mathematical model of the flexible beam is described by partial differential equations (PDEs) using Euler-Bernoulli beam theory. Then, The PDE model is approximated by using the Galerkin method, which is resulted in a set of ordinary differential equations (ODEs). Experiment is used to determine unknown parameters of the system to complete the model. The ODE model enables the control design of three input shapers: (i) Zero-Vibration (ZV), (ii) Zero-Vibration-Derivative (ZVD), and (iii) Zero-Vibration-Derivative-Derivative (ZVDD), which are employed to drive the flexible beam to the desired position and to reduce vibrations of the beam. Results and conclusion: The dynamic model is obtained in term of ordinary differential equations. Unknown parameters of the system are determined by experimental process. Various controllers are designed to eliminate the vibration of the beam. The simulation is applied to predict the dynamic response of the beam to verify the designed controllers numerically. Experiment shows the validity of the mathematical model through the consistency between the simulation and experimental data and the effectiveness of the controllers for the real system. These controllers show several advantages such as no need of extra equipment; the positioning controller is intact, which means it may be applied to many existing systems.

Glycemia monitoring

1998 ◽  
Vol 2 ◽  
pp. 23-30
Author(s):  
Igor Basov ◽  
Donatas Švitra
Keyword(s):  
Diabetes Mellitus ◽  
Mathematical Model ◽  
Numerical Methods ◽  
Differential Equations ◽  
Blood Sugar ◽  
Self Regulation ◽  
Physiological System ◽  
Non Linear ◽  
The Mathematical Model

Here a system of two non-linear difference-differential equations, which is mathematical model of self-regulation of the sugar level in blood, is investigated. The analysis carried out by qualitative and numerical methods allows us to conclude that the mathematical model explains the functioning of the physiological system "insulin-blood sugar" in both normal and pathological cases, i.e. diabetes mellitus and hyperinsulinism.

scholarly journals Determination of the Vertical Load on the Carrying Structure of a Flat Wagon with the 18–100 and Y25 Bogies

2021 ◽  
Vol 11 (9) ◽  
pp. 4130
Author(s):  
Oleksij Fomin ◽  
Alyona Lovska ◽  
Václav Píštěk ◽  
Pavel Kučera
Keyword(s):  
Mathematical Model ◽  
Fatigue Strength ◽  
Service Life ◽  
Dynamic Characteristics ◽  
Dynamic Load ◽  
Field Tests ◽  
Vertical Load ◽  
Mathcad Software ◽  
The Mathematical Model

The study deals with determination of the vertical load on the carrying structure of a flat wagon on the 18–100 and Y25 bogies using mathematic modelling. The study was made for an empty wagon passing over a joint irregularity. The authors calculated the carrying structure of a flat wagon with the designed parameters and the actual features recorded during field tests. The mathematical model was solved in MathCad software. The study found that application of the Y25 bogie for a flat wagon with the designed parameters can decrease the dynamic load by 41.1% in comparison to that with the 18–100 bogie. Therefore, application of the Y25 bogie under a flat wagon with the actual parameters allows decreasing the dynamic loading by 41.4% in comparison to that with the 18–100 bogie. The study also looks at the service life of the supporting structure of a flat wagon with the Y25 bogie, which can be more than twice as long as the 18–100 bogie. The research can be of interest for specialists concerned with improvements in the dynamic characteristics and the fatigue strength of freight cars, safe rail operation, freight security, and the results of the research can be used for development of innovative wagon structures.

Research on the Performance Simulation of the Transmission System of Loader with Secondary Regulating Technique

2010 ◽  
Vol 426-427 ◽  
pp. 299-302
Author(s):  
Fa Ye Zang
Keyword(s):  
Mathematical Model ◽  
Fuzzy Control ◽  
Energy Saving ◽  
High Speed ◽  
Transmission System ◽  
Performance Simulation ◽  
Constant Torque ◽  
Braking Torque ◽  
The Mathematical Model ◽  
Inertial Energy

Based on deeply analyzing the working principles and energy-saving theory of loader secondary regulating transmission system, regenerating the transmission system’s inertial energy by controlling constant torque was put forward. Considering large changes of the parameters of the transmission system and its non-linearity, a fuzzy control was adopted to control the transmission system, and the mathematical model of the system was established, then the simulations of the performance of the transmission system has been conducted. The conclusion was made that the inertial energy can be reclaimed and reused in the system by the application of the secondary regulation technology, and braking by controlling constant torque is stable, it can ensure the security of braking at high speed and also permits changing the efficiency of recovery by changing the braking torque. The system’s power has been reduced and energy saving has been achieved.

Robust sideslip angle observer of commercial vehicles based on cornering stiffness estimation using neural network

2022 ◽  
pp. 095440702110724
Author(s):  
Chenyu Zhou ◽  
Liangyao Yu ◽  
Yong Li ◽  
Jian Song
Keyword(s):  
Neural Network ◽  
Mathematical Model ◽  
Stability Control ◽  
Estimation Accuracy ◽  
Accurate Estimation ◽  
Commercial Vehicles ◽  
Sideslip Angle ◽  
The Neural Network ◽  
Wide Range ◽  
The Mathematical Model

Accurate estimation of sideslip angle is essential for vehicle stability control. For commercial vehicles, the estimation of sideslip angle is challenging due to severe load transfer and tire nonlinearity. This paper presents a robust sideslip angle observer of commercial vehicles based on identification of tire cornering stiffness. Since tire cornering stiffness of commercial vehicles is greatly affected by tire force and road adhesion coefficient, it cannot be treated as a constant. To estimate the cornering stiffness in real time, the neural network model constructed by Levenberg-Marquardt backpropagation (LMBP) algorithm is employed. LMBP is a fast convergent supervised learning algorithm, which combines the steepest descent method and gauss-newton method, and is widely used in system parameter estimation. LMBP does not rely on the mathematical model of the actual system when building the neural network. Therefore, when the mathematical model is difficult to establish, LMBP can play a very good role. Considering the complexity of tire modeling, this study adopted LMBP algorithm to estimate tire cornering stiffness, which have simplified the tire model and improved the estimation accuracy. Combined with neural network, A time-varying Kalman filter (TVKF) is designed to observe the sideslip angle of commercial vehicles. To validate the feasibility of the proposed estimation algorithm, multiple driving maneuvers under different road surface friction have been carried out. The test results show that the proposed method has better accuracy than the existing algorithm, and it’s robust over a wide range of driving conditions.

Increasing the mobility of a high-speed tracked vehicle based on a controlled skid algorithm

2020 ◽  
pp. 29-33
Author(s):  
S. V. Kondakov ◽  
O.O. Pavlovskaya ◽  
I.D. Ivanov ◽  
A.R. Ishbulatov
Keyword(s):  
Mathematical Model ◽  
Dynamic Stability ◽  
Simulation Modeling ◽  
Automatic System ◽  
High Speed ◽  
Control Algorithm ◽  
Loss Of Stability ◽  
Tracked Vehicle ◽  
Hydrostatic Transmission ◽  
The Mathematical Model

A method for controlling the curvilinear movement of a high-speed tracked vehicle in a skid without loss of stability is proposed. The mathematical model of the vehicle is refined. With the help of simulation modeling, a control algorithm is worked out when driving in a skid. The effectiveness of vehicle steering at high speed outside the skid is shown. Keywords: controlled skid, dynamic stability, steering pole displacement, hydrostatic transmission, automatic system, fuel supply. [email protected]

scholarly journals The analysis of flutter characteristics based on generalized parameters of eigen modes of vibrations

2021 ◽  
pp. 95-102
Author(s):  
K. I Barinova ◽  
A. V Dolgopolov ◽  
O. A Orlova ◽  
M. A Pronin
Keyword(s):  
Mathematical Model ◽  
High Speed ◽  
Dynamic Pressure ◽  
Mode Shapes ◽  
Scaled Model ◽  
Design Specifications ◽  
Operation Conditions ◽  
Flutter Analysis ◽  
Generalized Parameters ◽  
The Mathematical Model

Flutter numerical analysis of a dynamically scaled model (DSM) of a high aspect ratio wing was performed using experimentally obtained generalized parameters of eigen modes of vibrations. The DSM is made of polymer composite materials and is designed for aeroelastic studies in a high-speed wind tunnel. As a result of the analysis, safe operation conditions (flutter limits) of the DSM were determined. The input data to develop the flutter mathematical model are DSM modal test results, i.e. eigen frequencies, mode shapes, modal damping coefficients, and generalized masses obtained from the experiment. The known methods to determine generalized masses have experimental errors. In this work some of the most practical methods to get generalized masses are used: mechanical loading, quadrature component addition and the complex power method. Errors of the above methods were analyzed, and the most reliable methods were selected for flutter analysis. Comparison was made between the flutter analysis using generalized parameters and a pure theoretical one based on developing the mathematical model from the DSM design specifications. According to the design specifications, the mathematical model utilizes the beam-like schematization of the wing. The analysis was performed for Mach numbers from 0.2 to 0.8 and relative air densities of 0.5, 1, 1.5. Comparison of the two methods showed the difference in critical flutter dynamic pressure no more than 6%, which indicates good prospects of the flutter analysis based on generalized parameters of eigen modes.

scholarly journals Mathematical modeling and algorithm for calculation of thermocatalytic process of producing nanomaterial

2021 ◽  
Vol 23 (3) ◽  
pp. 1590
Author(s):  
Bakhtiyar Ismailov ◽  
Zhanat Umarova ◽  
Khairulla Ismailov ◽  
Aibarsha Dosmakanbetova ◽  
Saule Meldebekova
Keyword(s):  
Mathematical Model ◽  
Differential Equations ◽  
Solid Phase ◽  
Nonlinear Effects ◽  
Operating Characteristics ◽  
Laplace Transform Method ◽  
Transform Method ◽  
Wide Range ◽  
The Laplace Transform ◽  
Complex Mathematical Model

<p>At present, when constructing a mathematical description of the pyrolysis reactor, partial differential equations for the components of the gas phase and the catalyst phase are used. In the well-known works on modeling pyrolysis, the obtained models are applicable only for a narrow range of changes in the process parameters, the geometric dimensions are considered constant. The article poses the task of creating a complex mathematical model with additional terms, taking into account nonlinear effects, where the geometric dimensions of the apparatus and operating characteristics vary over a wide range. An analytical method has been developed for the implementation of a mathematical model of catalytic pyrolysis of methane for the production of nanomaterials in a continuous mode. The differential equation for gaseous components with initial and boundary conditions of the third type is reduced to a dimensionless form with a small value of the peclet criterion with a form factor. It is shown that the laplace transform method is mainly suitable for this case, which is applicable both for differential equations for solid-phase components and calculation in a periodic mode. The adequacy of the model results with the known experimental data is checked.</p>

The static and dynamic characteristics of a pressure relief valve with a proportional solenoid-controlled pilot stage

2002 ◽  
Vol 216 (2) ◽  
pp. 143-156 ◽  
Author(s):  
R Maiti ◽  
R Saha ◽  
J Watton
Keyword(s):  
Mathematical Model ◽  
Dynamic Characteristics ◽  
Dynamic Behaviour ◽  
Practical Experience ◽  
Pressure Relief Valve ◽  
Relief Valve ◽  
Pressure Relief ◽  
Static And Dynamic Characteristics ◽  
Good Comparison ◽  
The Mathematical Model

The steady state and dynamic characteristics of a two-stage pressure relief valve with proportional solenoid control of the pilot stage is studied theoretically as well as experimentally. The mathematical model is studied within the MATLAB-SIMULINK environment and the non-linearities have been considered via the use of appropriate SIMULINK blocks. The detailed modelling has resulted in a good comparison between simulation and measurement, albeit assumptions had to be made regarding the solenoid dynamic characteristic based upon practical experience. The use of this characteristic combined with additional dynamic terms not previously considered allows new estimations of internal characteristics to be made such as the damping flowrate. The overall dynamic behaviour has been shown to be dominated by the solenoid characteristic relating force to applied voltage.

scholarly journals Computational Study of the Coupled Mechanism of Thermophoretic Transportation and Mixed Convection Flow around the Surface of a Sphere

Molecules ◽  
2020 ◽  
Vol 25 (11) ◽  
pp. 2694
Author(s):  
Amir Abbas ◽  
Muhammad Ashraf ◽  
Yu-Ming Chu ◽  
Saqib Zia ◽  
Ilyas Khan ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Mixed Convection ◽  
Computational Study ◽  
Convection Flow ◽  
Mixed Convection Flow ◽  
Partial Differential ◽  
Primitive Form ◽  
The Mathematical Model

The main goal of the current work was to study the coupled mechanism of thermophoretic transportation and mixed convection flow around the surface of the sphere. To analyze the characteristics of heat and fluid flow in the presence of thermophoretic transportation, a mathematical model in terms of non-linear coupled partial differential equations obeying the laws of conservation was formulated. Moreover, the mathematical model of the proposed phenomena was approximated by implementing the finite difference scheme and boundary value problem of fourth order code BVP4C built-in scheme. The novelty point of this paper is that the primitive variable formulation is introduced to transform the system of partial differential equations into a primitive form to make the line of the algorithm smooth. Secondly, the term thermophoretic transportation in the mass equation is introduced in the mass equation and thus the effect of thermophoretic transportation can be calculated at different positions of the sphere. Basically, in this study, some favorite positions around the sphere were located, where the velocity field, temperature distribution, mass concentration, skin friction, and rate of heat transfer can be calculated simultaneously without any separation in flow around the surface of the sphere.

Sign in / Sign up

Export Citation Format

Share Document