scholarly journals Effect of FC3R on the properties of ultra-high-performance concrete with recycled glass

DYNA ◽  
2019 ◽  
Vol 86 (211) ◽  
pp. 84-93 ◽  
Author(s):  
Nancy Torres Castellanos ◽  
Jaime Antonio Fernández Gómez ◽  
Andres Mauricio Nuñez Lopez
Keyword(s):  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Substitution ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
Recycled Glass ◽  
Cost Efficient

Ultra-high-performance concrete (UHPC) is the essential innovation in concrete research of the recent decades. However, because of the high contents of cement and silica fume used, the cost and environmental impact of UHPC is considerably higher than conventional concrete. The use of industrial byproducts as supplementary cementitious materials, in the case of recycled glass powder and fluid catalytic cracking catalyst residue (FCC), the partial substitution of cement and silica fume allows to create a more ecological and cost-efficient UHPC. This research presents a study to determine the possibility of partial substitution of cement by FCC in a previously optimized mixture of ultra-high-performance concrete with recycled glass. The results demonstrate that compressive strength values of 150 and 151 MPa without any heat treatment can be achieved, respectively, when replacing 11% and 15% of the cement with FCC, for a determined amount of water and superplasticizer, compared to 158 MPa obtained for the reference UHPC without any FCC content. The rheology of fresh UHPC is highly decreased by replacing cement particles with FCC.

scholarly journals Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8291
Author(s):  
Mays A. Hamad ◽  
Mohammed Nasr ◽  
Ali Shubbar ◽  
Zainab Al-Khafaji ◽  
Zainab Al Masoodi ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Cement Production ◽  
Granulated Blast Furnace Slag ◽  
The Impact

The increase in cement production as a result of growing demand in the construction sector means an increase in energy consumption and CO2 emissions. These emissions are estimated at 7% of the global production of CO2. Ultra-high-performance concrete (UHPC) has excellent mechanical and durability characteristics. Nevertheless, it is costly and affects the environment due to its high amount of cement, which may reach 800–1000 kg/m3. In order to reduce the cement content, silica fume (SF) was utilized as a partial alternative to cement in the production of UHPC. Nevertheless, SF is very expensive. Therefore, the researchers investigated the use of supplementary cementitious materials cheaper than SF. Very limited review investigates addressed the impact of such materials on different properties of UHPC in comparison to that of SF. Thus, this study aims to summarize the effectiveness of using some common supplementary cementitious materials, including fly ashes (FA), ground granulated blast furnace slag (GGBS), metakaolin (MK) and rice husk ashes (RHA) in the manufacturing of UHPC, and comparing the performance of each material with that of SF. The comparison among these substances was also discussed. It has been found that RHA is considered a successful alternative to SF to produce UHPC with similar or even higher properties than SF. Moreover, FA, GGBS and MK can be utilized in combination with SF (as a partial substitute of SF) as a result of having less pozzolanic activity than SF.

scholarly journals Effect of Graphene Oxide Nanosheets on Physical Properties of Ultra-High-Performance Concrete with High Volume Supplementary Cementitious Materials

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1929 ◽  
Author(s):  
Yu-You Wu ◽  
Jing Zhang ◽  
Changjiang Liu ◽  
Zhoulian Zheng ◽  
Paul Lambert
Keyword(s):  
Graphene Oxide ◽  
Physical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Steam Curing ◽  
Slump Flow

Nanomaterials have been increasingly employed for improving the mechanical properties and durability of ultra-high-performance concrete (UHPC) with high volume supplementary cementitious materials (SCMs). Recently, graphene oxide (GO) nanosheets have appeared as one of the most promising nanomaterials for enhancing the properties of cementitious composites. To date, a majority of studies have concentrated on cement pastes and mortars with fewer investigations on normal concrete, ultra-high strength concrete, and ultra-high-performance cement-based composites with a high volume of cement content. The studies of UHPC with high volume SCMs have not yet been widely investigated. This paper presents an experimental investigation into the mini slump flow and physical properties of such a UHPC containing GO nanosheets at additions from 0.00 to 0.05% by weight of cement and a water–cement ratio of 0.16. The study demonstrates that the mini slump flow gradually decreases with increasing GO nanosheet content. The results also confirm that the optimal content of GO nanosheets under standard curing and under steam curing is 0.02% and 0.04%, respectively, and the corresponding compressive and flexural strengths are significantly improved, establishing a fundamental step toward developing a cost-effective and environmentally friendly UHPC for more sustainable infrastructure.

scholarly journals Review of The Cement-Based Composite Ultra-High-Performance Concrete (UHPC)

2019 ◽  
Vol 13 (1) ◽  
pp. 147-162 ◽  
Author(s):  
Edwin Paul Sidodikromo ◽  
Zhijun Chen ◽  
Muhammad Habib
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Cementitious Materials ◽  
Vital Role ◽  
Engineering Industry ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Strength Concrete ◽  
Normal Strength

Introduction: Ultra-High-Performance Concrete (UHPC) is an advanced type of concrete in the Civil Engineering industry. It is a cement-based composite which exhibits improved mechanical and durable properties showing a high compressive strength of not less than 150 MPa and high tensile strength of not less than 7 MPa. Objective: In this article, a review of the use of a different type of supplementary cementitious materials (SCMs) including fibers is made for obtaining the desired UHPC. Discussion and Conclusion: For this, it is vital to understand the principles of UHPC. UHPC has several advantages over normal strength concrete (NSC) and high strength concrete (HSC) with some commercially ready UHPC’s available, but the use of it is restricted due to the limited design codes. The influence of the curing type also plays a vital role in the overall performance of UHPC.

scholarly journals The effect of Vietnam’s nano-silica on mechanical properties of high-performance concrete

2021 ◽  
Vol 72 (1) ◽  
pp. 76-83
Author(s):  
Lam Le Hong ◽  
Lam Dao Duy ◽  
Huu Pham Duy
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Nano Silica ◽  
Nano Sio2 ◽  
Curing Period ◽  
Compressive Strength Test

The demand for High Performance Concrete (HPC) is steadily increasing with massive developments. Conventionally, it is possible to use industrial products such as silica fume (SF), fly ash, as supplementary cementitious materials (SCM), to enhance the attributes of HPC. In recent years, nano-silica (NS) is used as an additive in added mainly to fill up the deviation arises with the addition of SF for HPC. This study aims to optimize the proportion of NS (produced in Vietnam) in the mixture used for fabricating 70 MPa high-performance concrete. SiO2 powder with particle size from 10 to 15 nm were used for mixing. A series of compressive strength test of HPC with nano-SiO2 varied from 0 to 2.8 percent of total of all binders (0%, 1.2%, 2%, 2.8%), and the fixed percentage of silica fume at 8% were proposed. Results show compressive strength increases with the increase of nano-SiO2, but this increase stops after reaching 2%. And at day 28 of the curing period, only concrete mixture containing of 8% silica fume and 2% nano-SiO2, had the highest compressive strength.

Hydration, Shrinkages and Mechanical Properties of Ultra High Performance Concrete Containing Blast Furnace Slag and Algerian Dune Sand

2019 ◽  
Vol 42 ◽  
pp. 86-99
Author(s):  
Abdelfetah Zenati ◽  
Mahfoud Tahlaiti ◽  
Abdelhafid Khelidj ◽  
Mohamed Nadjib Oudjit
Keyword(s):  
Mechanical Properties ◽  
Blast Furnace ◽  
High Performance ◽  
High Performance Concrete ◽  
Current Trend ◽  
Cementitious Materials ◽  
Partial Substitution ◽  
Dune Sand ◽  
Ultra High Performance Concrete ◽  
Ecological Requirements

The new requirements for strength and durability have led to the development of Ultra High Performance concrete (UHPC) with outstanding mechanical properties and durability. However, the application of this type of concrete is exceptional, because of the high dosage of cement and the incorporation of expensive materials, such as silica fume (SF) whose dosage can reach 30% by weight of cement. This type of concrete is formulated on two bases: A fine granular skeleton (max diameter 630μm) and high cementitious materials content. The search for local materials to exploit them in the formulation of UHPC is the current trend. It is therefore necessary to control their effect on the behavior and evolution of cement hydration.The objective of this study is to highlight the influence of blast furnace (BFS) on hydration kinetics, linear endogenous shrinkage and chemical shrinkage at very early age (before 72h), drying shrinkage after hardening, as well as, the evolution of mechanical compressive strengths as a function of time. In addition, the exploitation of dune sand in the granular skeleton is an alternative to reduce the crushing energy and avoid microcracks possibly induced.The analysis of the results showed the interest of the use of the dune sand and the partial substitution of the cement by the BFS on the properties of the UHPCs in the fresh state and in the hardened state.In addition to the high performance achieved by UHPCs, their use, in Algeria, will meet both economic and ecological requirements given the abundance of very fine dune sand (southern Algeria) and complex blast furnace BFS of EL-Hadjar (Eastern Algeria).

scholarly journals Influence of high volumes of silica fume on the rheological behavior of oil well cement pastes

2021 ◽  
Author(s):  
Jedadiah Burroughs ◽  
Jason Weiss ◽  
John Haddock
Keyword(s):  
Silica Fume ◽  
Rheological Behavior ◽  
High Performance ◽  
High Performance Concrete ◽  
Oil Well ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
Cement Pastes ◽  
Specific Source ◽  
Well Cement

Specialized classes of concrete, such as ultra-high-performance concrete, use volumes of silica fume in concrete that are higher than those in conventional concrete, resulting in increased water demand and mixing difficulty. This study considered the effects of eight different silica fumes in three dosages (10%, 20%, 30%) with three w/b (0.20, 0.30, 0.45) on rheological behavior as characterized by the Herschel-Bulkley model. Results indicated that the specific source of silica fume used, in addition to dosage and w/b, had a significant effect on the rheological behavior. As such, all silica fumes cannot be treated as equivalent or be directly substituted one for another without modification of the mixture proportion. The rheology of cement pastes is significantly affected by the physical properties of silica fume more so than any chemical effects.

Sign in / Sign up

Export Citation Format

Share Document