scholarly journals IMPROVING CYANOBACTERIA AND CYANOTOXIN MONITORING IN SURFACE WATERS FOR DRINKING WATER SUPPLY

2017 ◽  
Vol 3 (1) ◽  
Author(s):  
Jing Li ◽  
Linda Parkefelt ◽  
Kenneth M Persson ◽  
Heidi Pekar
Keyword(s):  
Water Management ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Surface Waters ◽  
Drinking Water Supply ◽  
Cyanobacterial Blooms ◽  
Management Tool ◽  
Raw Water ◽  
Water Treatment Plants

Cyanobacteria in fresh water can cause serious threats to drinking water supplies. Managing cyanobacterial blooms particularly at small drinking water treatment plants is challenging. Because large amount of cyanobacteria may cause clogging in the treatment process and various cyanotoxins are hard to remove, while they may cause severe health problems. There is lack of instructions of what cyanobacteria/toxin amount should trigger what kind of actions for drink-ing water management except for Microcystins. This demands a Cyanobacteria Management Tool (CMT) to help regula-tors/operators to improve cyanobacteria/cyanotoxin monitoring in surface waters for drinking water supply. This project proposes a CMT tool, including selecting proper indicators for quick cyanobacteria monitoring and verifying quick analysis methods for cyanobacteria and cyanotoxin. This tool is suggested for raw water management regarding cyano-bacteria monitoring in lakes, especially in boreal forest climate. In addition, it applies to regions that apply international WHO standards for water management. In Swedish context, drinking water producers which use raw water from lakes that experience cyanobacterial blooms, need to create a monitoring routine for cyanobacteria/cyanotoxin and to monitor beyond such as Anatoxins, Cylindrospermopsins and Saxitoxins. Using the proposed CMT tool will increase water safety at surface water treatment plants substantially by introducing three alerting points for actions. CMT design for each local condition should integrate adaptive monitoring program.

scholarly journals Evaluation of Indicators for Cyanobacterial Risk in 108 Temperate Lakes Using 23 Years of Environmental Monitoring Data

2020 ◽  
Author(s):  
JING LI ◽  
Kenenth M Person ◽  
Heidi Pekar ◽  
Daniel Jansson
Keyword(s):  
Drinking Water ◽  
Water Supply ◽  
Anthropogenic Activities ◽  
Drinking Water Treatment ◽  
Drinking Water Supply ◽  
Cyanobacterial Blooms ◽  
Safe Drinking Water ◽  
Water Treatment Plants ◽  
Monitoring Strategies ◽  
Level 1

Abstract Background: Cyanobacterial blooms are of increasing concern for drinking water supply. Cyanobacterial risk in 108 temperate freshwater lakes were examined for drinking water supply. Results: In Sweden, a survey among drinking water producers showed that the sense of urgency was little. At 60 % of the Swedish drinking water treatment plants, operators lacked monitoring strategies. The study shows that blooms can produce a variety of toxins such as anatoxins, cylindrospermopsins, microcystins and saxitoxins. We confirmed the anthropogenic activities’ impact on cyanobacterial risk and evaluated that total phosphorus (TP) concentration can be used to indicate cyanobacterial risk by applying non-linear quantile regression for 108 Swedish monitoring lakes.Conclusion: We suggest that TP concentration should be investigated thoroughly to provide important knowledge which can be used to set nutrient targets to sustain safe drinking water supply and recreational services.TP should be targeted lower than 15 μg L-1, allowing 10 % exceedance of WHO Drinking Water Alert Level 1.

Leading the City of Baltimore into the 21st Century: Flexible Treatment Solutions and Integrated Raw Water Management

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
J. L. Manuszak ◽  
M. MacPhee ◽  
S. Liskovich ◽  
L. Feldsher
Keyword(s):  
Water Management ◽  
Water Quality ◽  
Water Supply ◽  
Conceptual Design ◽  
Membrane Filtration ◽  
Treatment Plant ◽  
Low Pressure ◽  
Management Tool ◽  
Raw Water ◽  
The City

The City of Baltimore, Maryland is one of many US cities faced with challenges related to increasing potable water demands, diminishing fresh water supplies, and aging infrastructure. To address these challenges, the City recently undertook a $7M study to evaluate water supply and treatment alternatives and develop the conceptual design for a new 120 million gallon per day (MGD) water treatment plant. As part of this study, an innovative raw water management tool was constructed to help model source water availability and predicted water quality based on integration of a new and more challenging surface water supply. A rigorous decision-making approach was then used to screen and select appropriate treatment processes. Short-listed treatment strategies were demonstrated through a year-long pilot study, and process design criteria were collected in order to assess capital and operational costs for the full-scale plant. Ultimately the City chose a treatment scheme that includes low-pressure membrane filtration and post-filter GAC adsorption, allowing for consistent finished water quality irrespective of which raw water supply is being used. The conceptual design includes several progressive concepts, which will: 1) alleviate treatment limitations at the City's existing plants by providing additional pre-clarification facilities at the new plant; and 2) take advantage of site conditions to design and operate the submerged membrane system by gravity-induced siphon, saving the City significant capital and operations and maintenance (O&M) costs. Once completed, the new Fullerton Water Filtration Plant (WFP) will be the largest low-pressure membrane plant in North America, and the largest gravity-siphon design in the world.

Experiences with the practical implementation and operation of biological nitrification for a small-scale drinking water treatment plant

2016 ◽  
Vol 16 (4) ◽  
pp. 922-930 ◽  
Author(s):  
L. Richard ◽  
E. Mayr ◽  
M. Zunabovic ◽  
R. Allabashi ◽  
R. Perfler
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Treatment Plant ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Drinking Water Supply ◽  
Small Scale ◽  
Treatment Performance ◽  
Biological Nitrification

The implementation and evaluation of biological nitrification as a possible treatment option for the small-scale drinking water supply of a rural Upper Austrian community was investigated. The drinking water supply of this community (average system input volume: 20 m3/d) is based on the use of deep anaerobic groundwater with a high ammonium content of geogenic origin (up to 5 mg/l) which must be treated to prevent the formation of nitrites in the drinking water supply system. This paper describes the implementation and operation of biological nitrification despite several constraints including space availability, location and financial and manpower resources. A pilot drinking water treatment plant, including biological nitrification implemented in sand filters, was designed and constructed for a maximum treatment capacity of 1.2 m3/h. Online monitoring of selected physicochemical parameters has provided continuous treatment performance data. Treatment performance of the plant was evaluated under standard operation as well as in the case of selected malfunction events.

scholarly journals Cyanobacteria and microcystin contamination in untreated and treated drinking water in Ghana

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Gloria Naa Dzama Addico ◽  
Jörg D. Hardege ◽  
Jiri Kohoutek ◽  
Kweku Amoaku Atta DeGraft-Johnson ◽  
Pavel Babica
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Human Health ◽  
Metropolitan Area ◽  
Cyanobacterial Blooms ◽  
Maximal Concentration ◽  
Raw Water ◽  
Treated Water ◽  
Treated Drinking Water ◽  
Who Guideline

<p>Although cyanobacterial blooms and cyanotoxins represent a worldwide-occurring phenomenon, there are large differences among different countries in cyanotoxin-related human health risk assessment, management practices and policies. While national standards, guideline values and detailed regulatory frameworks for effective management of cyanotoxin risks have been implemented in many industrialized countries, the extent of cyanobacteria occurrence and cyanotoxin contamination in certain geographical regions is under-reported and not very well understood. Such regions include major parts of tropical West and Central Africa, a region constisting of more than 25 countries occupying an area of 12 million km<sup>2</sup>, with a total population of 500 milion people. Only few studies focusing on cyanotoxin occurrence in this region have been published so far, and reports dealing specifically with cyanotoxin contamination in drinking water are extremely scarce. In this study, we report seasonal data on cyanobacteria and microcystin (MC) contamination in drinking water reservoirs and adjacent treatment plants located in Ghana, West Africa. During January-June 2005, concentrations of MCs were monitored in four treatment plants supplying drinking water to major metropolitan areas in Ghana: the treatment plants Barekese and Owabi, which serve Kumasi Metropolitan Area, and the plants Kpong and Weija, providing water for Accra-Tema Metropolitan Area. HPLC analyses showed that 65% samples of raw water at the intake of the treatment plants contained intracellular MCs (maximal detected concentration was 8.73 µg L<sup>-1</sup>), whereas dissolved toxins were detected in 33% of the samples. Significant reduction of cyanobacterial cell counts and MC concentrations was achieved during the entire monitoring period by the applied conventional water treatment methods (alum flocculation, sedimentation, rapid sand filtration and chlorination), and MC concentration in the final treated water never exceeded 1 µg L<sup>-1</sup> (WHO guideline limit for MCs in drinking water). However, cyanobacterial cells (93-3,055 cell mL<sup>-1</sup>) were frequently found in the final treated water and intracellular MCs were detected in 17% of the samples (maximal concentration 0.61 µg L<sup>-1</sup>), while dissolved MCs were present in 14% of the final treated water samples (maximal concentration 0.81 µg L<sup>-1</sup>). It indicates a borderline efficiency of the water treatment, thus MC concentrations in drinking water might exceed the WHO guideline limit if the treatment efficiency gets compromised. In addition, MC concentrations found in the raw water intake might represent significant human health risks for people living in areas with only a limited access to the treated or underground drinking water.</p>

scholarly journals The using of ion exchange method of Urban Territories’ sub-surface waters purification in Sakha (Yakutia)

2018 ◽  
Vol 170 ◽  
pp. 04003 ◽  
Author(s):  
Svetlana Fedorova ◽  
Anatolii Kryzhanovsky
Keyword(s):  
Drinking Water ◽  
Ion Exchange ◽  
Water Supply ◽  
Surface Waters ◽  
Drinking Water Supply ◽  
Exchange Method ◽  
Artesian Basin ◽  
Drinking Purposes ◽  
Urban Territories ◽  
Ion Exchange Method

The urgency of the conducted studies is dictated by the problem of Urban Territories’ sub-surface waters purification providing in the Republic of Sakha (Yakutia) population with drinking water, which can be partly solved by involving the sub-surface waters of the Yakutian artesian basin in the domestic and drinking water supply systems. The chemical composition feature of the under-ground waters under consideration, which substantially complicates their widespread use for domestic and drinking purposes, is the increased content of lithium, fluorine and sodium. The main research objective is to develop an effective method for clearing the sub-permafrost waters of the Yakutian artesian basin from lithium compounds, which can be used in water treatment systems for domestic and drinking purposes. As a result of the experimental studies on the sub-permafrost water purification of casting by the ion exchange method, its content reduced from 0.5 to 0.01 mg / l, which fully met the requirements for drinking water. On the basis of the results obtained, a comprehensive scheme for the sub-permafrost waters purification of the Yakutian artesian basin from lithium, fluorine and sodium was developed for the purpose of household and drinking water supply.

scholarly journals Evaluation of the SWAT model as an integrated management tool in the Švihov drinking water supply catchment

2019 ◽  
Vol 14 (No. 2) ◽  
pp. 76-83
Author(s):  
Jan Gregar ◽  
Jan Petrů ◽  
Jana Novotná
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Czech Republic ◽  
Water Supply ◽  
Integrated Management ◽  
Swat Model ◽  
Point Sources ◽  
Drinking Water Supply ◽  
Management Tool ◽  
The Czech Republic

Švihov dam, the largest drinking water source in the Czech Republic and Central Europe, has problems with eutrophication. The Švihov dam catchment spreads over 1200 km<sup>2</sup> and supplies over 1.5 million people in the capital of Prague and the Central Bohemian region with drinking water. Due to intensive agricultural activities and a lack of wastewater treatment plants in small settlements, the water quality is deteriorating. As a result, corrective measures need to be taken. Technological Agency of the Czech Republic supported this research which proposes different scenarios for a reduction of water quality degradation in the dam. The Trnávka dam watershed was chosen for study purposes as it occupies one quarter of the Švihov dam watershed. Hydrological balance was established using measured data. Point and non-point sources of nutrients were determined by field research and included in a Soil and Water Assessment Tool (SWAT) model. This study aims to propose complex watershed management to improve the state of the environment in the entire area and to reduce eutrophication. Different management practices would reduce nutrient loads of streams and increase water quality which is the critical factor in dam eutrophication. This research brings methodology and systematic approach to integrated management, and can be applied not only for the Švihov dam, but also for other watersheds, including those which function as drinking water supply.

scholarly journals Long-Term Drinking Water Quality Assessment Using Index and Multivariate Statistical Analysis for Three Water Treatment Plants of Erbil City, Iraq

2018 ◽  
Vol 2 (2) ◽  
pp. 39-48
Author(s):  
Hayder Mohammed Issa ◽  
Reem Ahmed Alrwai
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Treatment ◽  
Water Supply ◽  
Drinking Water Treatment ◽  
Drinking Water Quality ◽  
Total Alkalinity ◽  
Total Hardness ◽  
Water Treatment Plants

Safe source of drinking water is always considered as an essential factor in water supply for cities and urban areas. As a part of this issue, drinking water quality is monitored via a useful scheme: developing drinking water quality index DWQI. DWQI is preferably used as it summarizes the whole physicochemical and bacteriological properties of a drinking water sample into a single and simple term. In this study, an evaluation was made for three drinking water treatment plants DWTPs named: Efraz 1, Efraz 2 and Efraz 3 that supply drinking water to Erbil City. The assessment was made by testing thirteen physicochemical and two bacteriological parameters during a long period of (2003 – 2017). It has been found that turbidity, electrical conductivity EC, total alkalinity, total hardness, total coliform and fecal coliform have more influence on drinking water quality. DWQI results showed that the quality of drinking water supplied by the three DWTPs in Erbil City fallen within good level. Except various occasional periods where the quality was varying from good to fair. The quality of the drinking water supply never reached the level of marginal or poor over the time investigated. The applied hierarchical clustering analysis HCA classifies the drinking water dataset into three major clusters, reflecting diverse sources of the physicochemical and bacteriological parameter: natural, agriculture and urban discharges.

Modelling raw water quality—development of a drinking water management tool

2008 ◽  
Vol 8 (5) ◽  
pp. 589-596
Author(s):  
Ch. Kübeck ◽  
W. van Berk ◽  
A. Bergmann
Keyword(s):  
Water Management ◽  
Water Quality ◽  
Drinking Water ◽  
Agricultural Land ◽  
Groundwater Resources ◽  
Management Tool ◽  
Quality Development ◽  
Raw Water ◽  
Economic Resource ◽  
Raw Water Quality

Ensuring future drinking water supply requires a tough management of groundwater resources. However, recent practice of economic resource control often does not involve aspects of the hydrogeochemical and geohydraulical groundwater system. In respect of analysing the available quantity and quality of future raw water, an effective resource management requires a full understanding of the hydrogeochemical and geohydraulical processes within the aquifer. For example, the knowledge of raw water quality development with time helps to work out strategies of water treatment as well as planning finance resources. On the other hand, the effectiveness of planned measurements reducing the infiltration of harmful substances such as nitrate can be checked and optimized by using hydrogeochemical modelling. Thus, within the framework of the InnoNet program funded by Federal Ministry of Economics and Technology, a network of research institutes and water suppliers work in close cooperation developing a planning and management tool particularly oriented on water management problems. The tool involves an innovative material flux model that calculates the hydrogeochemical processes under consideration of the dynamics in agricultural land use. The program integrated graphical data evaluation is aligned on the needs of water suppliers.

Sign in / Sign up

Export Citation Format

Share Document