Prediction of root damaging during mechanical shaking of fruit trees

2014 ◽  
Vol 10 (1) ◽  
pp. 1-15
Author(s):  
Z. Láng
Keyword(s):  
Field Experiments ◽  
Calculated Data ◽  
Fruit Trees ◽  
List Type ◽  
Structure Model ◽  
Root Damage ◽  
Set Up ◽  
Simple Tree ◽  
The Given ◽  
Cherry Trees

The possible effect of shaker harvest on root damage of 10-year-old cherry trees was studied on a simple tree structure model. The model was composed of elastic trunk and rigid main roots, the ends of which were connected to the surrounding soil via springs and dumping elements. Equations were set up to be able to calculate the relation between shaking height on the trunk and strain in the roots. To get the data for root break and their elongation at different shaking heights on the trunk, laboratory and field experiments were carried out on cherry trees and on their roots. Having evaluated the measured and calculated data it could be concluded that root damage is to be expected even at 3.6% strain and the risk of it increases with increased trunk amplitudes, i.e.with the decrease of shaking heightat smaller stem diameters (i.e. in younger plantation), andif the unbalanced mass of the shaker machine is too large for the given tree size.

scholarly journals Dynamic analysis of a simple fruit tree structure model

2004 ◽  
Vol 10 (4) ◽  
Author(s):  
Z. Láng
Keyword(s):  
Field Experiments ◽  
Calculated Data ◽  
Fruit Tree ◽  
Tree Structure ◽  
Structure Model ◽  
Root Damage ◽  
Data Field ◽  
Model Equations ◽  
Set Up ◽  
Simple Tree

The effect of shaker harvest on root damage was studied on a simple tree structure model. Equations were set up to be able to calculate the relation between shaking height and stress in the roots. To get the strain at break data field experiments were carried out. The acceleration versus time curves were recorded on different heights of the stem. Evaluating measured and calculated data it can be concluded, that the risk of root damage increases when the height of shaking is decreased, the stern diameter is smaller, and if the unbalanced mass of the shaker is increased.

CALCULATION PARAMETERS OF SPRINKLING MACHINES WITH COMBINED FRONTAL AND CIRCULAR MOVEMENT

1970 ◽  
pp. 4-7
Author(s):  
N. N. Dubenok ◽  
G. V. Olgarenko ◽  
B. S. Gordon
Keyword(s):  
Calculated Data ◽  
Irrigation Scheduling ◽  
Natural Conditions ◽  
Linear Mode ◽  
Irrigation Technology ◽  
Irrigated Area ◽  
Center Pivot ◽  
Irrigation Technologies ◽  
The Given ◽  
Operation Characteristics

If the center pivot or linear moving irrigation machines are operated with their own individual irrigation technologies, but the irrigation machines with combined center-pivot and linear moving mode are operated on one field in turn as a center pivot and as a linear. The goal of this work is creation of theoretical base for calculation of improved irrigation machines parameters and existing irrigation equipment modernizing, according to the different natural conditions. The research object is investigation of characteristics of rain delivered from irrigation machines with combined center-pivot and linear moving mode, assuring uniform irrigation distribution according to the irrigation technology and operation parameters, size and configuration of seasonal norm as well as to the irrigation scheduling. The pointed goal is achieved by the given problem solving, when having basic data on the irrigation norm and time, as well as operation characteristics and the irrigation area configuration, the predicted hydro modulus are calculated for the irrigation machine working in a center pivot and in a linear mode. The simulation of sprinkling devices operation on the machine is made by one universal formula, when on the plots irrigated in center pivot and linear mode is achieved equality of arranged hydro modulus to the corresponding calculated data. At that, are considered all the possible combinations of the total irrigated area parts, irrigated with different technologies.

Influence of a chemical preparation of triazole50% cs on sowing the winter wheat against rust

2020 ◽  
Vol 3 (9) ◽  
pp. 231-233
Author(s):  
AliyevSh.K. ◽  
TuychiyevI.U ◽  
Karimov N ◽  
Umaraliev.M.I
Keyword(s):  
Winter Wheat ◽  
Field Experiments ◽  
Yellow Rust ◽  
Biological Efficiency ◽  
Chemical Preparation ◽  
Seed Growth ◽  
Biological Farming ◽  
The Given ◽  
Farming Efficiency

The article is focused on the data of the carried works on studying biological efficiency of fungi Triazole 50% on sowing the winter wheat against yellow rust as well as on the height, development and fertility of the wheat. On May 5, 2019 from 9 to 10 o’clock under the temperature 21-23 field experiments of Triazol 50% CS manufactured by the firm “Agroximstar” (Uzbekistan) were carried out on winter wheat as a protector of seeds of winter wheat of Pervitsa sort against the disease of yellow rustin the irrigated conditions in an experimental field of the Institute “Istiklal” of Andijan district of Andijan region. The aim of the given research is to study biological-farming efficiency and determination of optimal norms of preparation expenses and to study the influence of fungicide on the height and development as well as on the fertility of the wheat. The received data showed that the preparation Triazole 50% CS effected on the pathogen of yellow rust favorably and besides that it didn’t effect on seed growth and energy of growth negatively.

scholarly journals Effects of disk tillage on soil condition, crop yield and weed infestation

2011 ◽  
Vol 48 (No. 1) ◽  
pp. 20-26
Author(s):  
M. Birkás ◽  
T. Szalai ◽  
C. Gyuricza ◽  
M. Gecse ◽  
K. Bordás
Keyword(s):  
Winter Wheat ◽  
Crop Yield ◽  
Field Experiments ◽  
Soil Layer ◽  
Soil Condition ◽  
Perennial Weeds ◽  
Weed Infestation ◽  
Set Up ◽  
Different Levels

This research was instigated by the fact that during the last decade annually repeated shallow disk tillage on the same field became frequent practice in Hungary. In order to study the changes of soil condition associated with disk tillage and to assess it is consequences, long-term tillage field experiments with different levels of nutrients were set up in 1991 (A) and in 1994 (B) on Chromic Luvisol at Gödöllö. The effects of disk tillage (D) and disk tillage combined with loosening (LD) on soil condition, on yield of maize and winter wheat, and on weed infestation were examined. The evaluation of soil condition measured by cone index and bulk density indicated that use of disking annually resulted in a dense soil layer below the disking depth (diskpan-compaction). It was found, that soil condition deteriorated by diskpan-compaction decreased the yield of maize significantly by 20 and 42% (w/w), and that of wheat by 13 and 15% (w/w) when compared to soils with no diskpan-compaction. Averaged over seven years, and three fertilizer levels, the cover % of the total, grass and perennial weeds on loosened soils were 73, 69 and 65% of soils contained diskpan-compaction.

scholarly journals The impact of translation modality on user experience: an eye-tracking study of the Microsoft Word user interface

2021 ◽  
Author(s):  
Ana Guerberof Arenas ◽  
Joss Moorkens ◽  
Sharon O’Brien
Keyword(s):  
User Interface ◽  
Eye Tracking ◽  
Cognitive Load ◽  
Task Completion ◽  
Eye Tracker ◽  
Software Products ◽  
Microsoft Word ◽  
Set Up ◽  
The Impact ◽  
The Given

AbstractThis paper presents results of the effect of different translation modalities on users when working with the Microsoft Word user interface. An experimental study was set up with 84 Japanese, German, Spanish, and English native speakers working with Microsoft Word in three modalities: the published translated version, a machine translated (MT) version (with unedited MT strings incorporated into the MS Word interface) and the published English version. An eye-tracker measured the cognitive load and usability according to the ISO/TR 16982 guidelines: i.e., effectiveness, efficiency, and satisfaction followed by retrospective think-aloud protocol. The results show that the users’ effectiveness (number of tasks completed) does not significantly differ due to the translation modality. However, their efficiency (time for task completion) and self-reported satisfaction are significantly higher when working with the released product as opposed to the unedited MT version, especially when participants are less experienced. The eye-tracking results show that users experience a higher cognitive load when working with MT and with the human-translated versions as opposed to the English original. The results suggest that language and translation modality play a significant role in the usability of software products whether users complete the given tasks or not and even if they are unaware that MT was used to translate the interface.

scholarly journals Collaborative digital platform France – Cuba: oncorehabilitation in reproductive and sexual health

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Thierry Almont ◽  
Louis Bujan ◽  
Clarisse Joachim ◽  
Guillaume Joguet ◽  
Mylène Vestris ◽  
...  
Keyword(s):  
Sexual Health ◽  
Cancer Registries ◽  
Cancer Surveillance ◽  
Practical Training ◽  
List Type ◽  
Digital Platform ◽  
Reproductive And Sexual Health ◽  
The Caribbean ◽  
Collaborative Platform ◽  
Set Up

Abstract Background In the French West-Indies, few studies have been performed on fertility and sexual problems in cancer survivors, which are frequent and recurring issues reported by surveys on unmet needs. Additionally, mutualizing human and material resources and promoting cooperation through a collaborative platform are the most appropriate response to complex health pathways in the Caribbean territories. Implementation of such a collaborative platform will help to launch a strategic Caribbean partnership to transfer theoretical and technical skills and care standards in oncofertility and oncosexuality. Methods We propose to set up a collaborative digital platform to strengthen, from the French expertise, Cuban health professionals’ knowledge, know-how, and skills in oncofertility and oncosexuality. The project will be coordinated by a coordinating, scientific, and supervisory committee, and the main activities will include: Theoretical training in e-learning adapted to low-speed Internet. Practical training in fertility preservation and sexual rehabilitation. Digital multidisciplinary consultation meetings for medical decisions to be taken for complex clinical cases. The platform will benefit from a recurrent evaluation, by the two cancer registries of Martinique and Cuba, with the following performance indicators: number of Cuban professionals trained, number of professionals sensitized, hourly volumes (or number of training courses provided), satisfaction of trained professionals, number of e-RCPs carried out online and number of missionaries supported. These indicators will be set up and analyzed by the registers. This project meets the Cuban and French health policies (cancer plans and national sexual health strategies) and will be implemented in liaison with the Health Agencies of both countries and the Embassy of France in Cuba. Discussion This project aims to provide support through bilateral exchanges to improve reproductive and sexual health in Cuba’s cancer patients. This collaboration will be based on a long-lasting French expertise and a solid Cuban health system. Consequently, this collaborative digital platform will contribute to data collection for cancer surveillance, and the two participating countries will ultimately be identified in the Caribbean as having centers of competence and excellence in oncofertility and oncosexuality with care standards.

scholarly journals Neutralization of Acidic Wastewater from a Steel Plant by Using CaO-Containing Waste Materials from Pulp and Paper Industries

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2653
Author(s):  
Tova Jarnerud ◽  
Andrey V. Karasev ◽  
Pär G. Jönsson
Keyword(s):  
Fly Ash ◽  
Pulp And Paper ◽  
Waste Materials ◽  
Paper Mills ◽  
Steel Mills ◽  
Lime Mud ◽  
Set Up ◽  
Pulp And Paper Industries ◽  
The Given ◽  
Acidic Wastewater

In this study, CaO-containing wastes from pulp and paper industries such as fly ash (FA) and calcined lime mud (LM) were utilized to neutralize and purify acidic wastewaters from the pickling processes in steel mills. The investigations were conducted by laboratory scale trials using four different batches of wastewaters and additions of two types of CaO-containing waste materials. Primary lime (PL), which is usually used for the neutralization, was also tested in the same experimental set up in the sake of comparison. The results show that these secondary lime sources can effectively increase the pH of the acidic wastewaters as good as the commonly used primary lime. Therefore, these secondary lime sources could be potential candidates for application in neutralization processes of industrial acidic wastewater treatment. Moreover, concentrations of metals (such as Cr, Fe, Ni, Mo and Zn) can decrease dramatically after neutralization by using secondary lime. The LM has a purification effect from the given metals, similar to the PL. Application of fly ash and calcined lime mud as neutralizing agents can reduce the amount of waste from pulp and paper mills sent to landfill and decrease the need for nature lime materials in the steel industry.

Design and Evaluation of the Key Units in a Rapeseed Direct Seeder Integrated with Plowing-Rotating Combined Tillage

2021 ◽  
Vol 37 (6) ◽  
pp. 1005-1014
Author(s):  
Guoliang Wei ◽  
Qingsong Zhang ◽  
Biao Wang ◽  
QingXi Liao
Keyword(s):  
Field Experiments ◽  
Optimal Parameter ◽  
Structural Parameters ◽  
List Type ◽  
Oil Crops ◽  
Orthogonal Experiments ◽  
Heavy Soil ◽  
Tillage Depth ◽  
Working Parameters ◽  
Orthogonal Field

HighlightsThe seeder combined the plowing and rotating tillage to overcome the heavy soil and a large amount of straws.The plow could lift and turn the soil and straw before rotary tillage.The optimal working parameters of the seeder were obtained by orthogonal field experiments.Abstract. Rapeseed, one of the most important oil crops in China, is mainly planted in the mid-lower reaches of the Yangtze River. However, limited by the special long-term rice-rapeseed rotation, rotary tillage is applied in most of the planted areas apply instead of plow tillage, leading to a shallow arable layer. On the other hand, maintaining a high-quality seedbed for rapeseed becomes a challenge because a large amount of straw remains buried in the soil. As a solution, a rapeseed direct seeder that combines plow tillage and rotary tillage was designed. The structure of the plowing unit, whose key components were a lifting-turning plow and symmetrical plow, was analyzed based on the forming principle of the plow. Furthermore, a mechanical soil throwing model of the rotary tillage blade was built to determine the structural parameters. Then, the interaction between the rotary tillage unit and the lift-turning plow was analyzed. Finally, the performance and optimal parameters were evaluated by orthogonal field experiments. The seedbed after the operations indicated that the seeder could achieve the function of turning the soil and straw first and then rotating the soil with good passability, mixing the straw and the soil, flattening the surface of the seed bed, and stabilizing the tillage depth. Orthogonal experiments showed that the optimal working parameters of the seeder were as follows: the tillage depth was 180 mm, the equipment forward speed was 2.1 km/h, and the speed of the rotary tillage blade was 250 r/min. Under the optimal parameter combination, the power consumption of the seeder, the thickness of the tillage layer, the crop residue burial efficiency, the soil breakage efficiency, and the flatness of the seed bed surface were 30.48 kW, 231 mm, 90.88%, 93.26%, and 21.15 mm, respectively. The working performance of the seeder could meet the tillage requirements of rapeseed planting. Keywords: Direct seeder, Evaluation, Plow, Plowing-rotating combined tillage, Rapeseed.

Inhibitor development in haemophilia according to concentrate

2015 ◽  
Vol 113 (05) ◽  
pp. 968-975 ◽  
Author(s):  
Riita Lassila ◽  
Flora Peyvandi ◽  
Gabriele Calizzani ◽  
Alex Gatt ◽  
Thierry Lambert ◽  
...  
Keyword(s):  
Calculated Data ◽  
Incidence Rates ◽  
Clotting Factor ◽  
Haemophilia A ◽  
Severe Haemophilia ◽  
Inhibitor Development ◽  
Haemophilia B ◽  
Number Of Patients ◽  
Recombinant Fviii ◽  
Set Up

SummaryInhibitor development represents the most serious side effect of haemophilia treatment. Any difference in risk of inhibitor formation depending on the product used might be of clinical relevance. It was this study’s objective to assess inhibitor development according to clotting factor concentrate in severe haemophilia A and B. The European Haemophilia Safety Surveillance (EUHASS) was set up as a study monitoring adverse events overall and according to concentrate. Since October 2008, inhibitors were reported at least quarterly. Number of treated patients was reported annually, specifying the number of patients completing 50 exposure days (Previously Untreated Patients, PUPs) without inhibitor development. Cumulative incidence, incidence rates and 95 % confidence intervals (CI) were calculated. Data from October 1, 2008 to December 31, 2012 were analysed for 68 centres that validated their data. Inhibitors developed in 108/417 (26 %; CI 22–30 %) PUPs with severe haemophilia A and 5/72 (7 %; CI 2–16%) PUPs with severe haemophilia B. For Previously Treated Patients (PTPs), 26 inhibitors developed in 17,667 treatment years [0.15/100 treatment years; CI 0.10–0.22) for severe haemophilia A and 1/2836 (0.04/100; (CI 0.00–0.20) for severe haemophilia B. Differences between plasma-derived and recombinant concentrates, or among the different recombinant FVIII concentrates were investigated. In conclusion, while confirming the expected rates of inhibitors in PUPs and PTPs, no class or brand related differences were observed.

Feeder Bus Timetable Design and Vehicle Size Setting in Peak Hour Demand Conditions

2019 ◽  
Vol 2673 (10) ◽  
pp. 321-332 ◽  
Author(s):  
Xueping Dou ◽  
Qiang Meng
Keyword(s):  
Mixed Integer ◽  
Arrival Times ◽  
Non Linear Programming ◽  
Bee Colony ◽  
Proposed Model ◽  
Feeder Bus ◽  
Minlp Model ◽  
Failure Cost ◽  
Set Up ◽  
The Given

This study proposes a solution to the feeder bus timetabling problem, in which the terminal departure times and vehicle sizes are simultaneously determined based on the given transfer passengers and their arrival times at a bus terminal. The problem is formulated as a mixed integer non-linear programming (MINLP) model with the objective of minimizing the transfer waiting time of served passengers, the transfer failure cost of non-served passengers, and the operating costs of bus companies. In addition to train passengers who plan to transfer to buses, local passengers who intend to board buses are considered and treated as passengers from virtual trains in the proposed model. Passenger attitudes and behaviors toward the waiting queue caused by bus capacity constraints in peak hour demand conditions are explicitly embedded in the MINLP model. A hybrid artificial bee colony (ABC) algorithm is developed to solve the MINLP model. Various experiments are set up to account for the performance of the proposed model and solution algorithm.

Sign in / Sign up

Export Citation Format

Share Document