Characterization of metallurgical grade silicon

1990 ◽  
Vol 5 (9) ◽  
pp. 1894-1899 ◽  
Author(s):  
J. C. Anglézio ◽  
C. Servant ◽  
F. Dubrous
Keyword(s):  
Electron Microscopy ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Optical Metallography ◽  
Metallurgical Grade Silicon ◽  
Transmission Electron ◽  
Grade Silicon ◽  
Precipitated Phases ◽  
Scanning Electron

Optical metallography, scanning electron microscopy, electron microprobe analysis, and transmission electron microscopy were used to characterize metallurgical grade silicon, produced in an electric are furnace. Coincidence fraction determinations were assumed to be Σ7 and Σ9 when grain boundaries are underlined by precipitated phases and Σ3 when they are not. The study of intergranular compounds was emphasized; ten compounds were found, the main ones being Si2Ca, Si8Al6Fe4Ca, Si2Al2Ca, Si2FeTi, and Si2.4Fe (α leboitc). The precipitation of these compounds was discussed according to the principal impurity concentrations in silicon. The crystalline structure of Si8Al6Fe4Ca was determined to be triclinic with a = 1.3923 nm, b = 1.3896 nm, c = 1.3900 nm and α = 92.4°, β = 110.3°, γ = 119.9°.

Scanning Electron Microscopy and Electron Microprobe Analysis of Malignant Cell Cultures

1968 ◽  
Vol 26 ◽  
pp. 164-165
Author(s):  
R. I. Johnsson-Hegyeli ◽  
A. F. Hegyeli ◽  
D. K. Landstrom ◽  
W. C. Lane
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Cultures ◽  
Electron Microprobe ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Three Dimensional ◽  
Malignant Cell ◽  
Interference Microscopy ◽  
Scanning Electron

Last year we reported on the use of reflected light interference microscopy (RLIM) for the direct color photography of the surfaces of living normal and malignant cell cultures without the use of replicas, fixatives, or stains. The surface topography of living cells was found to follow underlying cellular structures such as nuceloli, nuclear membranes, and cytoplasmic organelles, making possible the study of their three-dimensional relationships in time. The technique makes possible the direct examination of cells grown on opaque as well as transparent surfaces. The successful in situ electron microprobe analysis of the elemental composition and distribution within single tissue culture cells was also reported.This paper deals with the parallel and combined use of scanning electron microscopy (SEM) and the two previous techniques in a study of living and fixed cancer cells. All three studies can be carried out consecutively on the same experimental specimens without disturbing the cells or their structural relationships to each other and the surface on which they are grown. KB carcinoma cells were grown on glass coverslips in closed Leighto tubes as previously described. The cultures were photographed alive by means of RLIM, then fixed with a fixative modified from Sabatini, et al (1963).

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Novel AlF3 Cubes

NANO ◽  
2015 ◽  
Vol 10 (05) ◽  
pp. 1550071 ◽  
Author(s):  
Maoquan Xue ◽  
Changsheng Li
Keyword(s):  
Electron Microscopy ◽  
Synthesis And Characterization ◽  
Metal Fluoride ◽  
Controlled Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Cubic Structure ◽  
Synthesis Approach ◽  
Scanning Electron

In this paper, regularly shaped AlF 3 particles with cubic structure were successfully synthesized via a solvothermal route. The as-prepared products were characterized by X-ray powder diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The experimental results indicated that reaction temperature and time have significant effects on the morphology of the as-prepared products. A possible formation process has also been investigated on the basis of a series of XRD and SEM studies of the product obtained at different conditions. This well-controlled synthesis approach may be extended to fabricate other metal fluoride materials.

Jahnsite—whiteite solid solutions and associated minerals in the phosphate pegmatite at Hagendorf-Süd, Bavaria, Germany

2010 ◽  
Vol 74 (6) ◽  
pp. 969-978 ◽  
Author(s):  
I. E. Grey ◽  
W. G. Mumme ◽  
S. M. Neville ◽  
N. C. Wilson ◽  
W. D. Birch
Keyword(s):  
Electron Microscopy ◽  
Solid Solutions ◽  
Microprobe Analysis ◽  
Electron Microprobe Analysis ◽  
Full Range ◽  
Intensity Data ◽  
Compositional Zoning ◽  
Phosphate Mineral ◽  
End Members ◽  
Scanning Electron

AbstractSecondary phosphate assemblages from the Hagendorf Süd granitic pegmatite, containing the new Mn-Al phosphate mineral, nordgauite, have been characterized using scanning electron microscopy and electron microprobe analysis. Nordgauite nodules enclose crystals of the jahnsite—whiteite group of minerals, showing pronounced compositional zoning, spanning the full range of Fe/Al ratios between jahnsite and whiteite. The whiteite-rich members are F-bearing, whereas the jahnsite-rich members contain no F. Associated minerals include sphalerite, apatite, parascholzite, zwieselite-triplite solid solutions and a kingsmountite-related mineral. The average compositions of whiteite and jahnsite from different zoned regions correspond to jahnsite-(CaMnMn), whiteite-(CaMnMn) and the previously undescribed whiteite-(CaMnFe) end-members. Mo-Kα CCD intensity data were collected on a twinned crystal of the (CaMnMn)-dominant whiteite and refined in P2/a to wRobs = 0.064 for 1015 observed reflections.

scholarly journals Preparation and Characterization of Nanostructured Hollow MgO Spheres

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 537
Author(s):  
Jishuo Han ◽  
Guohua Li ◽  
Lin Yuan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Shell Thickness ◽  
Template Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carbon Microsphere ◽  
Transmission Electron ◽  
Scanning Electron

Nanostructured hollow MgO microspheres were prepared by the template method. First, D-Anhydrous glucose was polymerized by the hydrothermal method to form a template. Second, a colorless solution was obtained by mixing magnesite with hydrochloric acid in a 1:2 proportion and heating in an 80 °C water bath for 2 h. Finally, the template from the first step was placed in the colorless solution, and the resulting precipitate was calcined at 550 °C for 2 h. The phase composition and microstructure of the calcined samples were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD results indicated that the main crystal is periclase. The SEM results indicates that the template carbon microsphere surface is smooth, and the its size is uniform and concentrated in the range of 100–200 nm. The diameters of the samples range from 60 to 90 nm, which is smaller than the size of the carbon microsphere. The TEM results indicates that the sample is hollow with a shell thickness of about 6–10 nm. The specific surface area of the calcined hollow sphere is 59.5 m²·g−1.

scholarly journals Characterization of monoclonal IgG cryoglobulins: fine-structural and morphological analysis

Blood ◽  
1987 ◽  
Vol 69 (2) ◽  
pp. 677-681 ◽  
Author(s):  
DN Podell ◽  
CH Packman ◽  
J Maniloff ◽  
GN Abraham
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Morphological Analysis ◽  
Vascular Occlusion ◽  
Molecular Clusters ◽  
Morphological Properties ◽  
Transmission Electron ◽  
Thin Walled ◽  
Scanning Electron

Abstract The morphology of the amorphous, gelatinous, and crystalline varieties of monoclonal IgG cryoglobulins was analyzed by light and transmission and scanning electron microscopy. Each cryoglobulin had a characteristic fine structure that correlated with its gross morphology. Transmission electron microscopy showed that the amorphous precipitates were random and disorganized molecular clumps. In contrast, cryogels were thin-walled, well-organized, and hydrated strawlike clusters, whereas cryocrystals formed tightly compacted, highly structured molecular clusters. Crystals that formed in blood produced rouleaux, and analysis by scanning electron microscopy indicated that the crystals could form thick-walled, branching, macromolecular nets that could physically trap cells. The morphological properties provided visual impressions by which cryoglobulins could cause clinical disease secondary to vascular occlusion produced by self- associated IgG cryoglobulin molecules.

Sign in / Sign up

Export Citation Format

Share Document