High-temperature oxidation of ion-plated TiN and TiAlN films

1993 ◽  
Vol 8 (5) ◽  
pp. 1093-1100 ◽  
Author(s):  
Hiroshi Ichimura ◽  
Atsuo Kawana
Keyword(s):  
High Temperature ◽  
Oxidation Rate ◽  
High Temperature Oxidation ◽  
Mass Gain ◽  
Activation Energies ◽  
Ion Diffusion ◽  
Temperature Oxidation ◽  
Al Content ◽  
Rate Determining Step ◽  
Apparent Activation Energies

The high-temperature oxidation of TiN, Ti0.9Al0.1N, and Ti0.6Al0.4N films which were deposited onto stainless steel substrates using an arc ion-plating apparatus was studied at temperatures ranging from 923 to 1173 K for 0.6 to 60 ks in air. The oxidation rate obtained from mass gain as a function of time was found to fit well to a parabolic time dependence. From their temperature dependence, the apparent activation energies of oxidation were determined. With increasing Al contents, the oxidation rate decreased, and the activation energies of oxidation reaction increased. Formed oxide layers were analyzed by XRD, SEM, and EPMA. With increased Al content in TiAlN films, the rate-determining step changes from oxygen ion diffusion in formed rutile to oxygen or aluminum ion diffusion in the formed Al2O3 layer.

Oxidation of Tantalum Nitride

2013 ◽  
Vol 761 ◽  
pp. 125-129 ◽  
Author(s):  
Kazuya Hamaguchi ◽  
Tomoyuki Tsuchiyama ◽  
Junichi Matsushita
Keyword(s):  
High Temperature ◽  
Oxide Layer ◽  
Human Body ◽  
Body Fluid ◽  
High Temperature Oxidation ◽  
Tantalum Oxide ◽  
Mass Gain ◽  
Tantalum Nitride ◽  
Oxidation Temperature ◽  
Temperature Oxidation

Tantalum (Ta) can be use a suture for operation and implant material in order not to react with body fluid and stimulate a human body. In this study, the stable oxide of a tantalum, tantalum oxide layer produced by oxidation of the tantalum nitride, TaN powders by high temperature oxidation were investigated in order to determine the possibility of its a distributed aid for biomaterial composite such as an artificial root etc. The sample, TaN powder oxidized at high temperature exhibited a steady mass gain with increasing oxidation temperature. Based on the results of the XRD, tantalum oxide, Ta2O5 was detected on the samples. It is considered, the TaN showed a good oxidation film produced by high temperature oxidation.

ENHANCING HIGH-TEMPERATURE OXIDATION RESISTANCE OF TITANIUM ALLOY WITH KF110-B4C-Ag THROUGH LASER TECHNOLOGY

2021 ◽  
Author(s):  
ZHAO ZHANG ◽  
JIANING LI ◽  
ZHIYUN YE ◽  
CAINIAN JING ◽  
MENG WANG ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
High Temperature ◽  
Oxidation Resistance ◽  
High Temperature Oxidation ◽  
Mass Gain ◽  
Temperature Oxidation ◽  
Laser Technology ◽  
X Ray ◽  
Ta15 Titanium Alloy ◽  
Oxidation Resistant

In this paper, the high-temperature oxidation resistant coating on the TA15 titanium alloy by laser cladding (LC) of the KF110-B4C-Ag mixed powders was analyzed in detail. The scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS) images indicated that a good metallurgy bond between the fabricated coating/TA15 was formed; also the fine/compact microstructure was produced after a cladding process. The oxidation mass gain of TA15 was higher than that of the coating after LC process, which were 3.72 and 0.91[Formula: see text]mg[Formula: see text]cm[Formula: see text], respectively, at 60[Formula: see text]h, greatly enhancing the high temperature oxidation resistance.

scholarly journals Additively Manufactured NiTi and NiTiHf Alloys: Estimating Service Life in High-Temperature Oxidation

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2104 ◽  
Author(s):  
Hediyeh Dabbaghi ◽  
Keyvan Safaei ◽  
Mohammadreza Nematollahi ◽  
Parisa Bayati ◽  
Mohammad Elahinia
Keyword(s):  
High Temperature ◽  
Oxidation Rate ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Early Stage ◽  
Niti Alloy ◽  
Temperature Oxidation ◽  
X Ray ◽  
Rate Law ◽  
Parabolic Rate

In this study, the effect of the addition of Hf on the oxidation behavior of NiTi alloy, which was processed using additive manufacturing and casting, is studied. Thermogravimetric analyses (TGA) were performed at the temperature of 500, 800, and 900 °C to assess the isothermal and dynamic oxidation behavior of the Ni50.4Ti29.6Hf20 at.% alloys for 75 h in dry air. After oxidation, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to analyze the oxide scale formed on the surface of the samples during the high-temperature oxidation. Two stages of oxidation were observed for the NiTiHf samples, an increasing oxidation rate during the early stage of oxidation followed by a lower oxidation rate after approximately 10 h. The isothermal oxidation curves were well matched with a logarithmic rate law in the initial stage and then by parabolic rate law for the next stage. The formation of multi-layered oxide was observed for NiTiHf, which consists of Ti oxide, Hf oxide, and NiTiO3. For the binary alloys, results show that by increasing the temperature, the oxidation rate increased significantly and fitted with parabolic rate law. Activation energy of 175.25 kJ/mol for additively manufactured (AM) NiTi and 60.634 kJ/mol for AM NiTiHf was obtained.

High-Temperature Oxidation Behaviors of 30Cr25Ni20Si Heat-Resistant Steel in Air

2020 ◽  
Vol 861 ◽  
pp. 83-88
Author(s):  
You Yang ◽  
Xiao Dong Wang
Keyword(s):  
High Temperature ◽  
Oxide Film ◽  
High Temperature Oxidation ◽  
Film Growth ◽  
Surface Oxidation ◽  
Mass Gain ◽  
Resistant Steel ◽  
Temperature Oxidation ◽  
Heat Resistant Steel ◽  
Heat Resistant

High temperature oxidation dynamic behaviors and mechanisms for 30Cr25Ni20Si heat-resistant steel were investigated at 800, 900 and 1000°C. The oxide layers were characterized by scanning electron microscopy (SEM-EDS), X-ray diffractometer (XRD). The results showed that the oxidation rate of test alloys is increased with increasing the oxidation time. The oxidation dynamic curves at 800 and 900°C follow from liner to parabolic oxidation law. The transition point is 10 h. At 1000°C, the steel exhibits a catastrophic oxidation, and the oxidation mass gain value at 50 h is 0.77 mg/cm2. This suggests that the steel at 900°C has formed a dense protective surface oxidation film, effectively preventing the diffusion of the oxygen atoms and other corrosive gas into the alloy. Therefore, at the first stage of oxidation, chemical adsorption and reaction determine the oxide film composition and formation process. At the oxide film growth stage, oxidation is controlled by migration of ions or electrons across the oxide film. When the spinel scale forms, it acts as a compact barrier for O element and improving the oxidation resistance.

Oxidation Behaviour of Nickel-Based Alloys Containing High Re Contents Comparable to the Third Generation Nickel-Based Superalloys

2004 ◽  
Vol 449-452 ◽  
pp. 349-352 ◽  
Author(s):  
Yoshinori Murata ◽  
Masahiko Morinaga ◽  
Ryokichi Hashizume
Keyword(s):  
High Temperature ◽  
Oxidation Resistance ◽  
High Temperature Oxidation ◽  
Oxidation Behaviour ◽  
The Other ◽  
Third Generation ◽  
Temperature Oxidation ◽  
Oxidation Test ◽  
Al Content ◽  
The Third

In order to elucidate the Re effect on oxidation resistance, a high-temperature oxidation test was conducted with two groups of Ni-based superalloys. One group of alloys was characterized by 10mol%Al content (10-Al series). The other group of alloys was characterized by 15mol%Al content (15-Al series). The oxidation resistance decreased clearly with increasing Re content in the 10-Al series alloys, but did not in the 15-Al series alloys.

Effect of Grain Size on the High Temperature Oxidation Behaviour of Austenitic Stainless Steels

2013 ◽  
Vol 333 ◽  
pp. 149-155 ◽  
Author(s):  
H. Fujikawa ◽  
Y. Iijima
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Oxide Scale ◽  
High Temperature Oxidation ◽  
Mass Gain ◽  
Oxidation Behaviour ◽  
Solution Temperature ◽  
Oxide Interface ◽  
Temperature Oxidation ◽  
Coarse Grains

The effect of grain size on high temperature oxidation behaviour of 316 steels at 700º, 850º and 1000°C in air was studied. The results show that the mass gain increases with the increase of grain size. Particularly, the gradient of mass gain is severe in at lower oxidation temperatures. In the oxidation at temperatures of more than the solid solution temperature, the grain size before the oxidation changed to coarse grain size. Therefore, in this case, it is not enough to estimate the oxidation behaviour by the grain size before the oxidation. The exfoliation of oxide scale is severe in steel with coarse grains. Over 850°C, the exfoliation was observed in 316 steel with coarse grains. At 1000°C, the oxide scale of 316 steel was exfoliated, but it was extreme in the coarse grains. Cr, Mn and Si in the oxide scale were enriched in the oxide scale of the steel with fine grains. Particularly, Si was remarkably enriched at the metal-oxide interface and grain boundaries.

scholarly journals High Temperature Oxidation Behavior of Selective Laser Melting Manufactured IN 625

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 668 ◽  
Author(s):  
Mihaela Raluca Condruz ◽  
Gheorghe Matache ◽  
Alexandru Paraschiv ◽  
Teodor Badea ◽  
Viorel Badilita
Keyword(s):  
High Temperature ◽  
Oxide Scale ◽  
Selective Laser Melting ◽  
High Temperature Oxidation ◽  
Oxidation Behavior ◽  
Complex Oxide ◽  
Mass Gain ◽  
Laser Melting ◽  
Temperature Oxidation ◽  
High Temperature Oxidation Behavior

The high-temperature oxidation behavior of selective laser melting (SLM) manufactured IN 625 was studied over 96 h of exposure at 900 °C and 1050 °C in air. An extensive analysis was performed to characterize the oxide scale formed and its evolution during the 96 h, including mass gain analysis, EDS, XRD, and morphological analysis of the oxide scale. The mass gain rate of the bare material increases rapidly during the first 8 h of temperature holding and diminishes at higher holding periods for both oxidation temperatures. High-temperature exposure for short periods (24 h) follows a parabolic law and promotes the precipitation of δ phase, Ni-rich intermetallics, and carbides. Within the first 24 h of exposure at 900 °C, a Cr2O3 and a (Ni, Fe)Cr2O4 spinel scale were formed, while at a higher temperature, a more complex oxide was registered, consisting of (Ni, Fe)Cr2O4, Cr2O3, and rutile-type oxides. Prolonged exposure of IN 625 at 900 °C induces the preservation of the Cr2O3 scale and the dissolution of carbides. Other phases and intermetallics, such as γ, δ phases, and MoNi4 are still present. The exposure for 96 h at 1050 °C led to the dissolution of all intermetallics, while the same complex oxide scale was formed.

Sign in / Sign up

Export Citation Format

Share Document