Initial formation mechanisms of (Ga1−xMnx)N nanorods grown on Al2O3 (0001) substrates

2008 ◽  
Vol 23 (12) ◽  
pp. 3275-3280 ◽  
Author(s):  
K.H. Lee ◽  
J.Y. Lee ◽  
H.C. Jeon ◽  
T.W. Kang ◽  
H.Y. Kwon ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Molecular Beam ◽  
Formation Mechanisms ◽  
X Ray Diffraction ◽  
Initial Formation ◽  
X Ray ◽  
Transmission Electron ◽  
High Resolution Tem ◽  
Xrd Patterns ◽  
Scanning Electron

The (Ga1−xMnx)N nanorods were grown on Al2O3 (0001) substrates by using rf-associated molecular beam epitaxy. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected-area diffraction pattern (SADP) results showed that the (Ga1−xMnx)N nanorods had (0001) preferential orientations. XRD patterns showed that the (Ga1−xMnx)N nanorods contained a small number of grains with different preferred orientations. High-resolution TEM (HRTEM) images showed that the (Ga1−xMnx)N nanorods consisted of different preferentially oriented grains. The initial formation mechanisms for the (Ga1−xMnx)N nanorods grown on Al2O3 (0001) substrates are described on the basis of the XRD, the TEM, the SADP, and the HRTEM results.

Growth of CuInS2 Films on Crystalline Substrates

1996 ◽  
Vol 426 ◽  
Author(s):  
R. Hunger ◽  
R. Scheer ◽  
M. Alt ◽  
H. J. Lewerenz
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Molecular Beam ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Growth Morphology ◽  
Cross Sectional ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

AbstractCuInS2 films were grown by molecular beam epitaxy (MBE) on hydrogen terminated Si(111) substrates with 4° miscut. X-ray diffraction (XRD) texture analysis reveals that CuInS2 was grown heteroepitaxially with the epitaxial relationships CuInS2(112) II Si(111) and [111] II [111]. Moreover, a substantial amount of rotational twins is observed. The crystalline order is maintained across the interface as observed by cross-sectional transmission electron microscopy (XTEM). XRD and scanning electron microscopy (SEM) investigations show that nonstoichiometric preparation greatly influences the growth morphology and leads to the formation of secondary phases.

scholarly journals Microwave-assisted synthesis, characterization and photoluminescence of shuttle-like BaMoO4 microstructure

2015 ◽  
Vol 33 (3) ◽  
pp. 537-540 ◽  
Author(s):  
Anukorn Phuruangrat ◽  
Budsabong Kuntalue ◽  
Titipun Thongtem ◽  
Somchai Thongtem
Keyword(s):  
Electron Microscopy ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
Ft Ir ◽  
Xrd Patterns ◽  
Scanning Electron ◽  
Ft Ir Spectroscopy

Abstract Shuttle-like BaMoO4 microstructure has been successfully synthesized from Ba(N03)2·4H20 and Na2MoO4·2H2O as starting materials in ethylene glycol solvent containing 20 mL 5 M NaOH by microwave radiation at 180 W for 30 min. The as- synthesized BaMoO4 product was characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, Raman spectrophotometry, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photolumines­cence (PL) spectroscopy. XRD patterns revealed that the products was tetragonal BaMoO4 phase. SEM and TEM characteriza­tion showed that the product had a shuttle-like BaMoO4 microstructure. PL of the shuttle-like BaMoO4 microstructure showed a maximum emission at 466 nm excited by 280 nm wavelength.

Temperature Induced Morphology Transformation of ZnO under Hydrothermal Condition

2011 ◽  
Vol 694 ◽  
pp. 559-564
Author(s):  
Yan Wei Li ◽  
Guang Sun ◽  
Jian Liang Cao ◽  
Hari Bala ◽  
Yan Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Zno Nanoparticles ◽  
Hydrothermal Condition ◽  
Zno Nanostructures ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
High Resolution Tem ◽  
Scanning Electron

ZnO nanostructures with different morphology were successfully prepared via a hexamethylendiamine-assisted hydrothermal synthesis route by only adjusting reaction temperature. The prepared ZnO samples were characterized by powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high resolution TEM (HRTEM). Results indicated that uniform flake-like ZnO nanoparticles with a similar thickness of about 70 nm and flower-like ZnO nanostructures assembled by prism-like nanorods were prepared at 120 °C and 180 °C, respectively. Possible mechanisms for the formation of ZnO with different morphologies were discussed. The photocatalytic properties of the as-prepared flake-like ZnO nanoparticles and flower-like ZnO nanostructures were studied.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

The Effect of the Microstructure of Diffusion Barriers on the Palladium Activation for Electroless Copper Deposition

2002 ◽  
Vol 716 ◽  
Author(s):  
Seok Woo Hong ◽  
Yong Sun Lee ◽  
Ki-Chul Park ◽  
Jong-Wan Park
Keyword(s):  
Electron Microscopy ◽  
Diffusion Barriers ◽  
Copper Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Electroless Copper ◽  
Sheet Resistance Measurement ◽  
Scanning Electron

AbstractThe effect of microstructure of dc magnetron sputtered TiN and TaN diffusion barriers on the palladium activation for autocatalytic electroless copper deposition has been investigated by using X-ray diffraction, sheet resistance measurement, field emission scanning electron microscopy (FE-SEM) and plan view transmission electron microscopy (TEM). The density of palladium nuclei on TaN diffusion barrier increases as the grain size of TaN films decreases, which was caused by increasing nitrogen content in TaN films. Plan view TEM results of TiN and TaN diffusiton barriers showed that palladium nuclei formed mainly on the grain boundaries of the diffusion barriers.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Synthesis and Study the Properties of a Solar Cell of Gold Nanoparticles Prepared in a Simple Chemical Way

2021 ◽  
Vol 19 (11) ◽  
pp. 66-71
Author(s):  
Maithm A. Obaid ◽  
Suha A Fadaam ◽  
Osama S. Hashim
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Casting Method ◽  
X Ray ◽  
Transmission Electron ◽  
Simple Chemical ◽  
Scanning Electron

The aim of this study is to prepare gold nanoparticles by a simple chemical method at a temperature of 70°C. The solution was dried on glass basest by Casting method, the rate of five drops per sample At a temperature 100 C. Then the structural and optical properties have been confirmed by X-ray diffraction, scanning electron microscopy (SEM) and Transmission Electron microscope (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and spectrum.

scholarly journals Chemical Stability of Ti3C2 MXene with Al in the Temperature Range 500–700 °C

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1979 ◽  
Author(s):  
Jing Zhang ◽  
Shibo Li ◽  
Shujun Hu ◽  
Yang Zhou
Keyword(s):  
Electron Microscopy ◽  
Chemical Stability ◽  
Metal Matrix ◽  
Matrix Composites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Range ◽  
Transmission Electron ◽  
Work First ◽  
Scanning Electron

Ti3C2Tx MXene, a new 2D nanosheet material, is expected to be an attractive reinforcement of metal matrix composites because its surfaces are terminated with Ti and/or functional groups of –OH, –O, and –F which improve its wettability with metals. Thus, new Ti3C2Tx/Al composites with strong interfaces and novel properties are desired. To prepare such composites, the chemical stability of Ti3C2Tx with Al at high temperatures should be investigated. This work first reports on the chemical stability of Ti3C2Tx MXene with Al in the temperature range 500–700 °C. Ti3C2Tx is thermally stable with Al at temperatures below 700 °C, but it reacts with Al to form Al3Ti and TiC at temperatures above 700 °C. The chemical stability and microstructure of the Ti3C2Tx/Al samples were investigated by differential scanning calorimeter, X-ray diffraction analysis, scanning electron microscopy, and transmission electron microscopy.

Influence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 Powders

2011 ◽  
Vol 412 ◽  
pp. 5-8 ◽  
Author(s):  
Ying Zhang ◽  
Ai Chen ◽  
Hai Rong Wang ◽  
Ze Song Li ◽  
Ying Ping Shen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Characteristics ◽  
Transmission Electron ◽  
Nanocrystalline Ceria ◽  
Scanning Electron

The present article reports the results of studies related to the synthesis of nanocrystalline ceria powder by combustion process using salt combustion aid. Cerium nitrate as oxidant and urea as fuel were used as reagents, Sodium Chloride was compared as combustion aid. The phase analysis and particle size were compared. The product was characterized by X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The results showed that employment of starting fuel with combustion aid resulted in synthesizing nanocrystalline ceria powder with fine agglomerates. By using combustion aid, the energetics of the combustion reaction and particle characteristics have been changed.

Sign in / Sign up

Export Citation Format

Share Document