Optical Coating by Hybrid Sol

2011 ◽  
Vol 1312 ◽  
Author(s):  
Wei-Hong Wang ◽  
Lih-Yue Chen
Keyword(s):  
Refractive Index ◽  
Single Layer ◽  
Acrylic Resin ◽  
Scratch Resistance ◽  
Flat Panel Display ◽  
Flat Panel ◽  
Water Contact ◽  
Quarter Wave ◽  
Ar Coating ◽  
Low Refractive Index

ABSTRACTThe fluorocarbon/SiO2 hybrid sol (L) for low refractive index coating was made by tetraethoxysilane (TEOS) and polytetrafluoroethylether derivative(PTFEED) with the hydrolysis and condensation in ethanol to get with coating refractive index as (nL=1.38). It can be coated on glass with single layer by quarter wave, the anti-reflective (AR) coating glass would have less than 3 % reflection. The TiO2 hybrid sol are prepared by tetraisopropyl orthotitanate(TPOT) with silane coupling agent and acrylic resin. The TiO2 hybrid sol with the coating refractive index (nH=1.75) used as high refraction coating sol (H). More acrylic resin added to get less coating refractive index (nM=1.65) used as middle refractive coating sol (M). Three layers AR coating glass can be made by M/H/L design to get 1.0 % reflection, have 3H hardness, 500g scratch resistance, and 107° water contact angle. These two kinds AR coating with fluorocarbon /SiO2 hybrid sol (L) coating on surface has anti-stain efficacy, which can be applied on the touch panel screen of flat panel display for mobile phone, PDA and e-book.

scholarly journals Preparation of ultra-broadband antireflective coatings for amplifier blast shields by a sol–gel method

2017 ◽  
Vol 5 ◽  
Author(s):  
Huai Xiong ◽  
Bin Shen ◽  
Zhiya Chen ◽  
Xu Zhang ◽  
Haiyuan Li ◽  
...  
Keyword(s):  
Refractive Index ◽  
Sol Gel ◽  
High Refractive Index ◽  
Dip Coating ◽  
Scratch Resistance ◽  
Fused Silica ◽  
Antireflective Coating ◽  
Antireflective Coatings ◽  
Average Residual ◽  
Low Refractive Index

A type of $\unicode[STIX]{x1D706}/4$–$\unicode[STIX]{x1D706}/4$ ultra-broadband antireflective coating has been developed using modified low refractive silica and high refractive silica layers by a sol–gel dip coating method for amplifier blast shields of the Shen Guang II high power laser facility (SG-II facility). Deposition of the first layer (high refractive index silica) involves baking at $200\,^{\circ }\text{C}$ in the post-treatment step. The second layer (low refractive index, $n=1.20$) uses low refractive index silica sol modified by acid catalysis. Thermal baking at temperatures no less than $500\,^{\circ }\text{C}$ for 60 min offers chemical stability, ethanol scratch resistance, and resistance to washing with water. The average residual reflection of dual-side-coated fused silica glass was less than 1% in the spectral range from 450 to 950 nm. Transmission gain has been evaluated by taking into account angular light, and the results show that the transmission gain increases with increasing light incidence. Even at $60^{\circ }$, the transmission spectrum of the broadband antireflective coating effectively covered the main absorption peak of Nd:glass.

Developing MgF2 nanoparticles for improved anti-reflection coating on aspherical lenses

2021 ◽  
pp. 2140014
Author(s):  
Jeong Wan Kim ◽  
Mun Ki Bae ◽  
Yeong Min Park ◽  
Byung Kwan Song ◽  
Tae Gyu Kim
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Single Layer ◽  
Industrial Applications ◽  
High Wear Resistance ◽  
Coating Film ◽  
Particle Size Measurement ◽  
Reflective Coating ◽  
Aspherical Lenses ◽  
Ar Coating

In general, MgF2, which is a low-reflective coating material, has a refractive index of 1.38. The refractive index of a single layer of MgF2 is not sufficient for industrial applications. In this study, an anti-reflection MgF2 coating film with low reflectivity and high wear resistance was synthesized to be used as a single layer with a TEOS binder. The prepared anti-reflection coating film was coated in the form of nanoparticles on a curvature lens having an aspherical surface coefficient by spin coating, and the correlation with optical properties was confirmed through particle size measurement. The MgF2 nanoparticle AR coating film was characterized by LDPSA, UV-Vis, SEM and ellipsometry. Mechanical and optical properties were confirmed with a minimum reflectance of 0.1% or less and a low refractive index of 1.24–1.25.

Xylene-Cellulose Caprate as a Histologic Mounting Medium of Low Refractive Index

1955 ◽  
Vol 30 (3) ◽  
pp. 133-134 ◽  
Author(s):  
R. D. Lillie ◽  
J. P. Greco Henson
Keyword(s):  
Refractive Index ◽  
Low Refractive Index

scholarly journals Nanoindentation Hardness and Practical Scratch Resistance in Mechanically Tunable Anti-Reflection Coatings

Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
James J. Price ◽  
Tingge Xu ◽  
Binwei Zhang ◽  
Lin Lin ◽  
Karl W. Koch ◽  
...  
Keyword(s):  
High Hardness ◽  
Scratch Resistance ◽  
Test Methods ◽  
Consumer Electronics ◽  
Minimal Impact ◽  
Depth Profiles ◽  
Nanoindentation Hardness ◽  
Coating Durability ◽  
Design Freedom ◽  
Ar Coating

This work presents fundamental understanding of the correlation between nanoindentation hardness and practical scratch resistance for mechanically tunable anti-reflective (AR) hardcoatings. These coatings exhibit a unique design freedom, allowing quasi-continuous variation in the thickness of a central hardcoat layer in the multilayer design, with minimal impact on anti-reflective optical performance. This allows detailed study of anti-reflection coating durability based on variations in hardness vs. depth profiles, without the durability results being confounded by variations in optics. Finite element modeling is shown to be a useful tool for the design and analysis of hardness vs. depth profiles in these multilayer films. Using samples fabricated by reactive sputtering, nanoindentation hardness depth profiles were correlated with practical scratch resistance using three different scratch and abrasion test methods, simulating real world scratch events. Scratch depths from these experiments are shown to correlate to scratches observed in the field from consumer electronics devices with chemically strengthened glass covers. For high practical scratch resistance, coating designs with hardness >15 GPa maintained over depths of 200–800 nm were found to be particularly excellent, which is a substantially greater depth of high hardness than can be achieved using previously common AR coating designs.

scholarly journals None sharp corner localized surface plasmons resonance based ultrathin metasurface single layer quarter wave plate

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qinyu Qian ◽  
Pengfei Liu ◽  
Li Fan ◽  
Liang Zhao ◽  
Chinhua Wang
Keyword(s):  
Surface Plasmons ◽  
Amplitude Ratio ◽  
Single Layer ◽  
Quarter Wave Plate ◽  
Localized Surface Plasmons ◽  
Sharp Corner ◽  
Wave Plate ◽  
Nanophotonic Devices ◽  
Elliptical Ring ◽  
Quarter Wave

AbstractWe report on a non-sharp-corner quarter wave plate (NCQW) within the single layer of only 8 nm thickness structured by the Ag hollow elliptical ring array, where the strong localized surface plasmons (LSP) resonances are excited. By manipulating the parameters of the hollow elliptical ring, the transmitted amplitude and phase of the two orthogonal components are well controlled. The phase difference of π/2 and amplitude ratio of 1 is realized simultaneously at the wavelength of 834 nm with the transmission of 0.46. The proposed NCQW also works well in an ultrawide wavelength band of 110 nm, which suggests an efficient way of exciting LSP resonances and designing wave plates, and provides a great potential for advanced nanophotonic devices and integrated photonic systems.

Sign in / Sign up

Export Citation Format

Share Document