Developing MgF2 nanoparticles for improved anti-reflection coating on aspherical lenses

2021 ◽  
pp. 2140014
Author(s):  
Jeong Wan Kim ◽  
Mun Ki Bae ◽  
Yeong Min Park ◽  
Byung Kwan Song ◽  
Tae Gyu Kim
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Single Layer ◽  
Industrial Applications ◽  
High Wear Resistance ◽  
Coating Film ◽  
Particle Size Measurement ◽  
Reflective Coating ◽  
Aspherical Lenses ◽  
Ar Coating

In general, MgF2, which is a low-reflective coating material, has a refractive index of 1.38. The refractive index of a single layer of MgF2 is not sufficient for industrial applications. In this study, an anti-reflection MgF2 coating film with low reflectivity and high wear resistance was synthesized to be used as a single layer with a TEOS binder. The prepared anti-reflection coating film was coated in the form of nanoparticles on a curvature lens having an aspherical surface coefficient by spin coating, and the correlation with optical properties was confirmed through particle size measurement. The MgF2 nanoparticle AR coating film was characterized by LDPSA, UV-Vis, SEM and ellipsometry. Mechanical and optical properties were confirmed with a minimum reflectance of 0.1% or less and a low refractive index of 1.24–1.25.

Investigation on Optical Properties of Transparent ITO Thin Films

2011 ◽  
Vol 347-353 ◽  
pp. 3481-3484
Author(s):  
Xue Hua Li ◽  
Dong Sheng Wang ◽  
Jian Zhou Du
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Refractive Index ◽  
Optical Properties ◽  
Glass Substrate ◽  
Film Theory ◽  
Single Layer ◽  
Minimum Value ◽  
Ito Thin Films ◽  
Layer Thin Film

Based on the single-layer thin film theory, we calculated transmittance of ITO thin film. The reflectivity arrive a maximum or a minimum according to whether the refractive index of film is greater or smaller than the refractive index of the glass substrate. we obtain the same maximum of transparence which is above 95% and the minimum value which decrease to 76.5% with the increase of refractive index.

Optical Coating by Hybrid Sol

2011 ◽  
Vol 1312 ◽  
Author(s):  
Wei-Hong Wang ◽  
Lih-Yue Chen
Keyword(s):  
Refractive Index ◽  
Single Layer ◽  
Acrylic Resin ◽  
Scratch Resistance ◽  
Flat Panel Display ◽  
Flat Panel ◽  
Water Contact ◽  
Quarter Wave ◽  
Ar Coating ◽  
Low Refractive Index

ABSTRACTThe fluorocarbon/SiO2 hybrid sol (L) for low refractive index coating was made by tetraethoxysilane (TEOS) and polytetrafluoroethylether derivative(PTFEED) with the hydrolysis and condensation in ethanol to get with coating refractive index as (nL=1.38). It can be coated on glass with single layer by quarter wave, the anti-reflective (AR) coating glass would have less than 3 % reflection. The TiO2 hybrid sol are prepared by tetraisopropyl orthotitanate(TPOT) with silane coupling agent and acrylic resin. The TiO2 hybrid sol with the coating refractive index (nH=1.75) used as high refraction coating sol (H). More acrylic resin added to get less coating refractive index (nM=1.65) used as middle refractive coating sol (M). Three layers AR coating glass can be made by M/H/L design to get 1.0 % reflection, have 3H hardness, 500g scratch resistance, and 107° water contact angle. These two kinds AR coating with fluorocarbon /SiO2 hybrid sol (L) coating on surface has anti-stain efficacy, which can be applied on the touch panel screen of flat panel display for mobile phone, PDA and e-book.

The anisotropic optical properties of different polytypes (ε, β, δ, γ) of GaSe lamellar materials

2020 ◽  
Vol 91 (3) ◽  
pp. 30102
Author(s):  
Mohamed Al-Hattab ◽  
Lhoucine Moudou ◽  
Younes Chrafih ◽  
Mohammed Khenfouch ◽  
Omar Bajjou ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Photovoltaic Cells ◽  
Single Layer ◽  
Dft Method ◽  
Strong Argument ◽  
All Optical ◽  
Lamellar Materials ◽  
Catalytic Applications ◽  
Uv Range

In this paper, we have calculated the optical properties of the different polytypes of GaSe lamellar materials. The calculations are based on the DFT method and is performed using the CASTEP code. All optical properties have been studied in a domain that extends energetically from 10 meV to 35 eV and have been measured for a polarization // and ⊥ with the c axis. A strong anisotropic was observed, which indicates that the optical properties of the GaSe material are essentially determined by the symmetry of a single layer, exactly by the symmetry resulting from the stacking of the layers. Moreover, the absorption starts in the UV–vis spectral range, the peaks appear in the UV range. The refractive index values are nxx = 2.54, 2.55, 2.88, 10.85, nzz = 3.90, 3.90, 3.26, 11.73 for ε, β, γ, δ, respectively at zero photon energy. Furthermore, we notice that the optical properties of different polytypes (ε, β, δ, γ) of GaSe lamellar materials are obtained both in the ultraviolet field or in the visible domain are significant and give a strong argument for the use of these materials in various applications, namely photovoltaic cells, nanoelectronic, optoelectronic, optical fiber and photo-catalytic applications.

Modification of optical properties of PC-PBT/Cr2O3 and PC-PBT/CdS nanocomposites by gamma irradiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20402
Author(s):  
Kaoutar Benthami ◽  
Mai ME. Barakat ◽  
Samir A. Nouh
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Color Difference ◽  
Band Gap Energy ◽  
Polybutylene Terephthalate ◽  
Γ Irradiation ◽  
Gap Energy ◽  
Vis Spectroscopy ◽  
Oxygen Atoms

Nanocomposite (NCP) films of polycarbonate-polybutylene terephthalate (PC-PBT) blend as a host material to Cr2O3 and CdS nanoparticles (NPs) were fabricated by both thermolysis and casting techniques. Samples from the PC-PBT/Cr2O3 and PC-PBT/CdS NCPs were irradiated using different doses (20–110 kGy) of γ radiation. The induced modifications in the optical properties of the γ irradiated NCPs have been studied as a function of γ dose using UV Vis spectroscopy and CIE color difference method. Optical dielectric loss and Tauc's model were used to estimate the optical band gaps of the NCP films and to identify the types of electronic transition. The value of optical band gap energy of PC-PBT/Cr2O3 NCP was reduced from 3.23 to 3.06 upon γ irradiation up to 110 kGy, while it decreased from 4.26 to 4.14 eV for PC-PBT/CdS NCP, indicating the growth of disordered phase in both NCPs. This was accompanied by a rise in the refractive index for both the PC-PBT/Cr2O3 and PC-PBT/CdS NCP films, leading to an enhancement in their isotropic nature. The Cr2O3 NPs were found to be more effective in changing the band gap energy and refractive index due to the presence of excess oxygen atoms that help with the oxygen atoms of the carbonyl group in increasing the chance of covalent bonds formation between the NPs and the PC-PBT blend. Moreover, the color intensity, ΔE has been computed; results show that both the two synthesized NCPs have a response to color alteration by γ irradiation, but the PC-PBT/Cr2O3 has a more response since the values of ΔE achieved a significant color difference >5 which is an acceptable match in commercial reproduction on printing presses. According to the resulting enhancement in the optical characteristics of the developed NCPs, they can be a suitable candidate as activate materials in optoelectronic devices, or shielding sheets for solar cells.

Ab initio calculation on the Optical Properties of AA- Stacked two dimensional Graphene, Silicene, Germanene, and Stanene

2018 ◽  
Vol 1 (1) ◽  
pp. 46-50
Author(s):  
Rita John ◽  
Benita Merlin
Keyword(s):  
Optical Properties ◽  
Band Structure ◽  
Density Functional ◽  
Electronic Band Structure ◽  
Complex Refractive Index ◽  
Single Layer ◽  
Generalized Gradient ◽  
Electronic Band ◽  
Wide Range ◽  
Optical Region

In this study, we have analyzed the electronic band structure and optical properties of AA-stacked bilayer graphene and its 2D analogues and compared the results with single layers. The calculations have been done using Density Functional Theory with Generalized Gradient Approximation as exchange correlation potential as in CASTEP. The study on electronic band structure shows the splitting of valence and conduction bands. A band gap of 0.342eV in graphene and an infinitesimally small gap in other 2D materials are generated. Similar to a single layer, AA-stacked bilayer materials also exhibit excellent optical properties throughout the optical region from infrared to ultraviolet. Optical properties are studied along both parallel (||) and perpendicular ( ) polarization directions. The complex dielectric function (ε) and the complex refractive index (N) are calculated. The calculated values of ε and N enable us to analyze optical absorption, reflectivity, conductivity, and the electron loss function. Inferences from the study of optical properties are presented. In general the optical properties are found to be enhanced compared to its corresponding single layer. The further study brings out greater inferences towards their direct application in the optical industry through a wide range of the optical spectrum.

scholarly journals Broadband spectroscopy of astrophysical ice analogues

2019 ◽  
Vol 629 ◽  
pp. A112 ◽  
Author(s):  
B. M. Giuliano ◽  
A. A. Gavdush ◽  
B. Müller ◽  
K. I. Zaytsev ◽  
T. Grassi ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Time Domain ◽  
Complex Refractive Index ◽  
Far Infrared ◽  
Infrared Region ◽  
Thz Radiation ◽  
The Real ◽  
Thz Range ◽  
The Time Domain

Context. Reliable, directly measured optical properties of astrophysical ice analogues in the infrared and terahertz (THz) range are missing from the literature. These parameters are of great importance to model the dust continuum radiative transfer in dense and cold regions, where thick ice mantles are present, and are necessary for the interpretation of future observations planned in the far-infrared region. Aims. Coherent THz radiation allows for direct measurement of the complex dielectric function (refractive index) of astrophysically relevant ice species in the THz range. Methods. We recorded the time-domain waveforms and the frequency-domain spectra of reference samples of CO ice, deposited at a temperature of 28.5 K and annealed to 33 K at different thicknesses. We developed a new algorithm to reconstruct the real and imaginary parts of the refractive index from the time-domain THz data. Results. The complex refractive index in the wavelength range 1 mm–150 μm (0.3–2.0 THz) was determined for the studied ice samples, and this index was compared with available data found in the literature. Conclusions. The developed algorithm of reconstructing the real and imaginary parts of the refractive index from the time-domain THz data enables us, for the first time, to determine the optical properties of astrophysical ice analogues without using the Kramers–Kronig relations. The obtained data provide a benchmark to interpret the observational data from current ground-based facilities as well as future space telescope missions, and we used these data to estimate the opacities of the dust grains in presence of CO ice mantles.

scholarly journals Synthesis of PVA/CeO2 Based Nanocomposites with Tuned Refractive Index and Reduced Absorption Edge: Structural and Optical Studies

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1570
Author(s):  
Shujahadeen B. Aziz ◽  
Elham M. A. Dannoun ◽  
Dana A. Tahir ◽  
Sarkawt A. Hussen ◽  
Rebar T. Abdulwahid ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Absorption Edge ◽  
Ceo2 Nanoparticles ◽  
Poly Vinyl Alcohol ◽  
Optical Parameters ◽  
Single Oscillator Model ◽  
Vis Spectroscopy ◽  
The Impact ◽  
Host Polymer

In the current study, polymer nanocomposites (NCPs) based on poly (vinyl alcohol) (PVA) with altered refractive index and absorption edge were synthesized by means of a solution cast technique. The characterization techniques of UV–Vis spectroscopy and XRD were used to inspect the structural and optical properties of the prepared films. The XRD patterns of the doped samples have shown clear amendments in the structural properties of the PVA host polymer. Various optical parameters were studied to get more insights about the influence of CeO2 on optical properties of PVA. On the insertion of CeO2 nanoparticles (NPs) into the PVA matrix, the absorption edge was found to move to reduced photon energy sides. It was concluded that the CeO2 nanoparticles can be used to tune the refractive index (n) of the host polymer, and it reached up to 1.93 for 7 wt.% of CeO2 content. A detailed study of the bandgap (BG) was conducted using two approaches. The outcomes have confirmed the impact of the nanofiller on the BG reduction of the host polymer. The results of the optical BG study highlighted that it is crucial to address the ɛ” parameter during the BG analysis, and it is considered as a useful tool to specify the type of electronic transitions. Finally, the dispersion region of n is conferred in terms of the Wemple–DiDomenico single oscillator model.

scholarly journals Polymer Composites with 0.98 Transparencies and Small Optical Energy Band Gap Using a Promising Green Methodology: Structural and Optical Properties

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1648
Author(s):  
Muaffaq M. Nofal ◽  
Shujahadeen B. Aziz ◽  
Jihad M. Hadi ◽  
Wrya O. Karim ◽  
Elham M. A. Dannoun ◽  
...  
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Polymer Composites ◽  
Amorphous Phase ◽  
Absorption Edge ◽  
Complex Form ◽  
Bandgap Energy ◽  
Optical Parameters ◽  
Visible Spectroscopy ◽  
Uv Visible

In this work, a green approach was implemented to prepare polymer composites using polyvinyl alcohol polymer and the extract of black tea leaves (polyphenols) in a complex form with Co2+ ions. A range of techniques was used to characterize the Co2+ complex and polymer composite, such as Ultraviolet–visible (UV-Visible) spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The optical parameters of absorption edge, refractive index (n), dielectric properties including real and imaginary parts (εr, and εi) were also investigated. The FRIR and XRD spectra were used to examine the compatibility between the PVA polymer and Co2+-polyphenol complex. The extent of interaction was evidenced from the shifts and change in the intensity of the peaks. The relatively wide amorphous phase in PVA polymer increased upon insertion of the Co2+-polyphenol complex. The amorphous character of the Co2+ complex was emphasized with the appearance of a hump in the XRD pattern. From UV-Visible spectroscopy, the optical properties, such as absorption edge, refractive index (n), (εr), (εi), and bandgap energy (Eg) of parent PVA and composite films were specified. The Eg of PVA was lowered from 5.8 to 1.82 eV upon addition of 45 mL of Co2+-polyphenol complex. The N/m* was calculated from the optical dielectric function. Ultimately, various types of electronic transitions within the polymer composites were specified using Tauc’s method. The direct bandgap (DBG) treatment of polymer composites with a developed amorphous phase is fundamental for commercialization in optoelectronic devices.

scholarly journals Optical Characterization of Ultra-Thin Films of Azo-Dye-Doped Polymers Using Ellipsometry and Surface Plasmon Resonance Spectroscopy

Photonics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 41
Author(s):  
Najat Andam ◽  
Siham Refki ◽  
Hidekazu Ishitobi ◽  
Yasushi Inouye ◽  
Zouheir Sekkat
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Spectroscopic Ellipsometry ◽  
Plasmon Resonance ◽  
Complex Refractive Index ◽  
Resonance Spectroscopy ◽  
Doped Polymers

The determination of optical constants (i.e., real and imaginary parts of the complex refractive index (nc) and thickness (d)) of ultrathin films is often required in photonics. It may be done by using, for example, surface plasmon resonance (SPR) spectroscopy combined with either profilometry or atomic force microscopy (AFM). SPR yields the optical thickness (i.e., the product of nc and d) of the film, while profilometry and AFM yield its thickness, thereby allowing for the separate determination of nc and d. In this paper, we use SPR and profilometry to determine the complex refractive index of very thin (i.e., 58 nm) films of dye-doped polymers at different dye/polymer concentrations (a feature which constitutes the originality of this work), and we compare the SPR results with those obtained by using spectroscopic ellipsometry measurements performed on the same samples. To determine the optical properties of our film samples by ellipsometry, we used, for the theoretical fits to experimental data, Bruggeman’s effective medium model for the dye/polymer, assumed as a composite material, and the Lorentz model for dye absorption. We found an excellent agreement between the results obtained by SPR and ellipsometry, confirming that SPR is appropriate for measuring the optical properties of very thin coatings at a single light frequency, given that it is simpler in operation and data analysis than spectroscopic ellipsometry.

Sign in / Sign up

Export Citation Format

Share Document