The Growth of Tin Oxide Aerogels: Theoretical Modeling and Experimental Characterizations

2015 ◽  
Vol 1731 ◽  
Author(s):  
Carlo Requião da Cunha ◽  
Fábio Dias da Silva ◽  
Renzo Morales
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Peroxide ◽  
Scanning Electron Microscopy ◽  
Tin Oxide ◽  
Oxygen Vacancies ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fixed Charges ◽  
Scanning Electron

ABSTRACTTin oxide aerogels were synthesized using the epoxide-assisted technique and characterized with X-ray diffraction, diffusive reflectance spectroscopy, particle-induced X-ray emission and scanning electron microscopy. Our results indicate that the material is electrically semi-insulating as the result of oxygen vacancies that appear as fixed charges at the bottom of the conduction band. A modification of the technique with the addition of hydrogen peroxide is proposed to reduce the levels of defects and enhance the optical transparency of the material.

Synthesis and photocatalytic performance of Bi2S3/SnS2 heterojunction

2017 ◽  
Vol 10 (02) ◽  
pp. 1750004 ◽  
Author(s):  
LiZhen Ren ◽  
DongEn Zhang ◽  
Xiao Yun Hao ◽  
Xin Xiao ◽  
Jun Yan Gong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Diffuse Reflectance ◽  
Photocatalytic Performance ◽  
Diffuse Reflectance Spectroscopy ◽  
Reflectance Spectroscopy ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Bi2S3/SnS2 heterostructured photocatalysts were synthesized from BiOI, SnCl[Formula: see text]5H2O and NH2CSNH2 using an economic and simple hydrothermal method. The as-synthesized samples were characterized by X-ray diffraction, scanning electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. The photodegradation activities of the Bi2S3/SnS2 heterostructured photocatalysts were estimated by degrading rhodamine B under simulated sunlight supplied by irradiating with a 350[Formula: see text]W Xe lamp. Bi2S3/SnS2 photocatalysts were prepared using varying percentages of Bi2S3. The sample containing 13% Bi2S3 had the most efficient photocatalyst performance among the tested samples. The photocatalytic mechanism involves heterojunctions formed in the Bi2S3/SnS2, which promoted effective separation of photoinduced electrons and holes.

Higher Photocatalytic Activity of P-Incorporated TiO2 Nanotube Arrays

2015 ◽  
Vol 1087 ◽  
pp. 452-456
Author(s):  
Khairul Arifah Saharudin ◽  
Srimala Sreekantan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Degradation Rate ◽  
Oxygen Vacancies ◽  
Xrd Analysis ◽  
Nanotube Arrays ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

TiO2 nanotubes arrays were prepared by anodization of Ti in EG containing H3PO4 and NH4F electrolyte. The samples were characterized by X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Energy dispersive X-ray spectroscopy (EDX) and photoluminescence spectra (PL). The as-anodized TiO2 nanotubes were annealed in inert (argon), reducing (nitrogen), or oxidizing (oxygen) atmosphere at 400 °C for 4 hr. XRD analysis revealed that the TiO2 nanotubes were anatase after annealing. In this study, the TiO2 nanotubes annealed in argon exhibited the highest degradation rate of methyl orange (MO) solution under ultraviolet irradiation among the samples. The degradation rate was approximately 98% after 5h, which may be ascribed to the large amount of oxygen vacancies and defects (phosphorus) within the Ar - TiO2 sample that simultaneously increased the degradation rate of MO.

The Facile Hydrothermal Preparation of WO3 and its Photocatalytic Performance under Visible-Light Irradiation

2014 ◽  
Vol 936 ◽  
pp. 347-351 ◽  
Author(s):  
Fen Fen Li ◽  
Hong Tao Gao ◽  
Guang Jun Liu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Photocatalytic Performance ◽  
Uv Light ◽  
Hydrothermal Process ◽  
Reflectance Spectroscopy ◽  
X Ray Diffraction ◽  
Hydrothermal Preparation ◽  
X Ray ◽  
Scanning Electron

The orthorhombic WO3 nanoplates were fabricated via a hydrothermal process, using HBF4 as the acid source. They were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV-vis diffused reflectance spectroscopy (UV-Vis DRS), respectively. The WO3 nanoplates exhibited nice UV-light driven photocatalytic performance in the degradation of Rhodamine B (RhB).

scholarly journals Effects of supercritical carbon dioxide on morphology of apocynum venetum fibers

2015 ◽  
Vol 19 (4) ◽  
pp. 1279-1282 ◽  
Author(s):  
Shi-Hui Gao ◽  
Chong-Wen Yu
Keyword(s):  
Electron Microscopy ◽  
Carbon Dioxide ◽  
Hydrogen Peroxide ◽  
Scanning Electron Microscopy ◽  
Supercritical Carbon Dioxide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Apocynum Venetum ◽  
Scanning Electron ◽  
Supercritical Carbon

This paper investigated the structures and compositions of apocynum venetum fibers treated with pectinase and mixture of sodium hydroxide and hydrogen peroxide in supercritical carbon dioxide fluid. The apocynum venetum fibers were analyzed by Fourier transform infrared spectrometry, X-ray diffraction, and scanning electron microscopy. Fourier transform infrared analysis indicated that pectinase could remove the pectin and hemicellulose and the mixture of sodium hydroxide and hydrogen peroxide could extract the lignin in supercritical carbon dioxide. Meanwhile, the results of X-ray diffraction showed that cellulose crystallinity index and crystallite sizes of treated fibers increased in comparison with that of untreated fibers. The studies of scanning electron microscopy also revealed a complete removal of non-cellulosic gummy material from surface of treated apocynum venetum fibers. Small gummy on the surface of apocynum venetum fibers would be removed by supercritical carbon dioxide, which can be verified by bubble dynamics.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

scholarly journals Analytical study of Buddha sculptures in Jingyin temple of Taiyuan, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

AbstractWith exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM–EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga)

2012 ◽  
Vol 620 ◽  
pp. 314-319
Author(s):  
Nur Amira Mamat Razali ◽  
Fauziah Abdul Aziz ◽  
Saadah Abdul Rahman
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Alkaline Treatment ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Preliminary Preparation ◽  
Characterization Studies ◽  
Scanning Electron

Hardwood is wood from angiosperm trees. The characteristic of hardwood include flowers, endosperm within seeds and the production of fruits that contain the seeds. This paper aims to discuss the preparation and characterization of cellulose obtained from hardwood. The hardwood Merbau (Intsia bijuga) was chosen as raw material in this study. Alkaline treatment and delignification methods were used for the preparation of cellulose. Acid hydrolysis was employed to produce cellulose nanocrystal (CNC). The treated and untreated samples were characterized using x-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). The final product, from both trated and untreated samples were then compared.

Sign in / Sign up

Export Citation Format

Share Document