Nanofiber Based Er(III) Metal Pyrochlore Oxides: Synthesis and Characterization

2007 ◽  
Vol 1023 ◽  
Author(s):  
Ruofeng Wang ◽  
Edward T. Bender ◽  
Mohannad T. Aljarrah ◽  
Edward A. Evans ◽  
Rex D. Ramsier
Keyword(s):  
Fourier Transformation ◽  
Annealing Temperature ◽  
Electrospun Nanofibers ◽  
Optical Emission ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Annealing Conditions ◽  
Near Ir ◽  
Transmission Electron

AbstractErbium(III) doped TiO2 nanofibers (Er2Ti2O7) have been synthesized by electrospinning mixtures of polymers, metal-containing materials, and erbium acetate. These electrospun nanofibers were subsequently annealed at temperatures of 550, 750, 950, and 1150 oC to remove the organics and leave behind the metal oxides. The crystal structure and optical properties of the nanofiber pyrochlores were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transformation IR (FTIR) spectroscopy. Different crystal structures were formed by controlling the annealing conditions. XRD data are compared with near-IR spectra to better understand the effects of annealing temperature on the Er (III) thermally-excited selective optical emission process.

scholarly journals A Study of Thin Film Resistors Prepared Using Ni-Cr-Si-Al-Ta High Entropy Alloy

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Ruei-Cheng Lin ◽  
Tai-Kuang Lee ◽  
Der-Ho Wu ◽  
Ying-Chieh Lee
Keyword(s):  
Annealing Temperature ◽  
Phase Evolution ◽  
Amorphous Structure ◽  
High Entropy Alloy ◽  
X Ray Diffraction ◽  
Temperature Coefficient Of Resistance ◽  
X Ray ◽  
High Entropy ◽  
Transmission Electron ◽  
Thin Film Resistors

Ni-Cr-Si-Al-Ta resistive thin films were prepared on glass and Al2O3substrates by DC magnetron cosputtering from targets of Ni0.35-Cr0.25-Si0.2-Al0.2casting alloy and Ta metal. Electrical properties and microstructures of Ni-Cr-Si-Al-Ta films under different sputtering powers and annealing temperatures were investigated. The phase evolution, microstructure, and composition of Ni-Cr-Si-Al-Ta films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Auger electron spectroscopy (AES). When the annealing temperature was set to 300°C, the Ni-Cr-Si-Al-Ta films with an amorphous structure were observed. When the annealing temperature was at 500°C, the Ni-Cr-Si-Al-Ta films crystallized into Al0.9Ni4.22, Cr2Ta, and Ta5Si3phases. The Ni-Cr-Si-Al-Ta films deposited at 100 W and annealed at 300°C which exhibited the higher resistivity 2215 μΩ-cm with −10 ppm/°C of temperature coefficient of resistance (TCR).

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys

2007 ◽  
Vol 130 ◽  
pp. 171-174 ◽  
Author(s):  
Z. Stokłosa ◽  
G. Badura ◽  
P. Kwapuliński ◽  
Józef Rasek ◽  
G. Haneczok ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Crystallization Process ◽  
Annealing Temperature ◽  
Magnetic Measurements ◽  
X Ray Diffraction ◽  
Soft Magnetic ◽  
X Ray ◽  
Second Stage ◽  
Transmission Electron

The crystallization and optimization of magnetic properties effects in FeXSiB (X=Cu, V, Co, Zr, Nb) amorphous alloys were studied by applying X-ray diffraction methods, high resolution transmission electron microscopy (HRTEM), resistometric and magnetic measurements. The temperatures of the first and the second stage of crystallization, the 1h optimization annealing temperature and the Curie temperature were determined for different amorphous alloys. Activation energies of crystallization process were obtained by applying the Kissinger method. The influence of alloy additions on optimization effect and crystallization processes was carefully examined.

Thermal quenching behavior of Er-doped silicon-rich SiO2 prepared by ion implantation

2004 ◽  
Vol 19 (9) ◽  
pp. 2699-2702 ◽  
Author(s):  
C.S. Zhang ◽  
H.B Xiao ◽  
Y.J. Wang ◽  
Z.J. Chen ◽  
X.L. Cheng ◽  
...  
Keyword(s):  
Silicon Nanocrystals ◽  
Annealing Temperature ◽  
Thermal Quenching ◽  
X Ray Diffraction ◽  
X Ray ◽  
Radiative Processes ◽  
Transmission Electron ◽  
Weak Intensity ◽  
Er Doped

Erbium and silicon were dual implanted into thermally grown SiO2 film on Si (110) substrates, followed by thermal treatment at 700–1200 °C for 30 min. The microstructure was studied by transmission electron microscope and x-ray diffraction. When the implanted films were annealed at T > 900 °C, the silicon nanocrystals (nc-Si) enwrapped by amorphous silicon (a-Si) could be observed. The thermal quenching behavior at λ = 1.535 μm and its relation with the annealling temperature were also investigated. With increasing annealing temperature, the portion of a-Si and the thermal quenching both decreased. Efficient luminescence from Er ions and weak intensity thermal quenching were obtained from the sample annealed at 1100 °C. The role of a-Si in non-radiative processes at T > 100 K is discussed.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Cu2FeSnS4 Semiconductor Nanocrystals with Zincblende Structure

2012 ◽  
Vol 512-515 ◽  
pp. 2019-2022 ◽  
Author(s):  
Xiao Lu Liang ◽  
Xian Hua Wei
Keyword(s):  
Random Distribution ◽  
Semiconductor Nanocrystals ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Nir Absorption ◽  
Average Size

Cu2FeSnS4semiconductor nanocrystals with zincblende structure have been successfully synthesized by a hot-injection approach. Cu+, Fe2+, and Sn4+cations have a random distribution in the zincblende unit cell, and the occupancy possibilities are 1/2, 1/4 and 1/4, respectively. Those nanocrystals were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), energy dispersive spectroscopy (EDS), and UV-Vis-NIR absorption spectroscopy. The Cu2FeSnS4 nanocrystals have an average size of 7.5 nm and a band gap of 0.92 eV.

Synthesis and Characterization of Co Nanoparticles by Solventless Thermal Decomposition

2007 ◽  
Vol 119 ◽  
pp. 71-74 ◽  
Author(s):  
Yan Li ◽  
Xiao Li Zhang ◽  
Young Hwan Kim ◽  
Young Soo Kang
Keyword(s):  
Crystal Structure ◽  
Thermal Decomposition ◽  
Synthesis And Characterization ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Of Nanoparticles ◽  
Co Nanoparticles

Co nanoparticles were synthesized via a solventless thermal decomposition of Co2+-oleate2. The crystalline structure is strongly affected by the thermal treatment of the Co nanoparticles. Further, the annealing also results in the decomposition of surfactant around Co particles. The size of nanoparticles was confirmed by transmission electron microscopy (TEM). The crystal structure of nanoparticles was characterized by X-ray diffraction pattern (XRD). The magnetic properties were characterized by vibrating sample magnetometer (VSM).

THE INVESTIGATION ON STABILITY AND STRUCTURAL PROPERTIES OF COHESION-BASED NANOSTRUCTURES MATERIAL

2013 ◽  
Vol 27 (27) ◽  
pp. 1350153 ◽  
Author(s):  
ALI BAHARI ◽  
REZA GHOLIPUR ◽  
MARYAM DERAKHSHI
Keyword(s):  
Annealing Temperature ◽  
Sol Gel ◽  
Growth Mode ◽  
X Ray Diffraction ◽  
Low Temperature Synthesis ◽  
Temperature Synthesis ◽  
X Ray ◽  
Annealing Temperatures ◽  
Atomic Force ◽  
Transmission Electron

Styrene-doped ZrLaO y nanostructures were obtained by sol–gel method low-temperature synthesis. The nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), atomic force microscope (AFM) and transmission electron microscopy (TEM) techniques. The observation using SEM and TEM revealed that the ring-shaped nanostructures were very uniform. Further characterization using XRD disclosed that the cohesion of the samples was controllable with annealing temperatures in the range of 800–1500°C. Cohesion property was investigated for the samples. The cohesion increased when increasing the annealing temperature. This was linked to the reinforcement of the oxygen bound on the ZrLaO y nanostructures The shape of nanostructures showed a transformation from a ring-shaped growth mode to a hole-surfaced growth mode with increasing annealing temperature. The styrene-doped ZrLaO y nanostructures with controllable crystallinity will have great potential for various applications in fuel, cells, batteries, electronics devices and chemical sensors.

Structure of CoxAg100-x and Its Relation to GMR

1992 ◽  
Vol 286 ◽  
Author(s):  
John Q. Xiao ◽  
J. Samuel ◽  
C. L. Chien
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Composition Range ◽  
Magnetic Scattering ◽  
Granular System ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Concentration

ABSTRACTWe have studied the structure of the Co-Ag granular system across the entire composition range, as well as the annealed samples, using transmission electron microscopy (TEM) and x-ray diffraction. GMR, as much as 80% at 5K and 25% at room temperature, have been observed. The absolute values of the resistivity (ρ) and the change of the resistivity (δρ) as functions of the magnetic Co concentration and the annealing temperature have been determined. A linear relation between δρ and I/rco, where rco is Co particle size, has been found. This result suggests that the magnetic scattering at the interfaces is crucial to GMR.

Sign in / Sign up

Export Citation Format

Share Document