Thermal Stability of Magnetic Properties in Dehydrogenated Triarylmethane Resins

1989 ◽  
Vol 173 ◽  
Author(s):  
Michiya Otani ◽  
Sugio Otani
Keyword(s):  
Thermal Stability ◽  
Magnetic Properties ◽  
Magnetic Property ◽  
Room Temperature ◽  
Permanent Magnets ◽  
Elevated Temperatures ◽  
Mechanical Response ◽  
The Stability ◽  
Thermal Stability Of

ABSTRACTThe stability of the magnetic properties of dehydrogenated triaryl-methane resins was investigated both at room temperature and at elevated temperatures. A magnetic property different from that reported in a previous paper was found in the course of studying the reproducibility of synthesis. This new property was examined through a mechanical response of the resins to a set of permanent magnets.

Thermal Breakdown Kinetics of 1-Ethyl-3-Methylimidazolium Ethylsulfate Measured Using Quantitative Infrared Spectroscopy

2017 ◽  
Vol 71 (12) ◽  
pp. 2626-2631 ◽  
Author(s):  
Jeffrey L. Wheeler ◽  
McKinley Pugh ◽  
S. Jake Atkins ◽  
Jason M. Porter
Keyword(s):  
Thermal Stability ◽  
Room Temperature ◽  
Computational Models ◽  
Elevated Temperatures ◽  
Molar Absorptivity ◽  
Ir Absorption ◽  
Optical Cell ◽  
Multiple Samples ◽  
Kinetics Of ◽  
Thermal Stability Of

In this work, the thermal stability of the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO4]) is investigated using infrared (IR) spectroscopy. Quantitative IR absorption spectral data are measured for heated [EMIM][EtSO4]. Spectra have been collected between 25 ℃ and 100 ℃ using a heated optical cell. Multiple samples and cell pathlengths are used to determine quantitative values for the molar absorptivity of [EMIM][EtSO4]. These results are compared to previous computational models of the ion pair. These quantitative spectra are used to measure the rate of thermal decomposition of [EMIM][EtSO4] at elevated temperatures. The spectroscopic measurements of the rate of decomposition show that thermogravimetric methods overestimate the thermal stability of [EMIM][EtSO4].

scholarly journals Thermal Stability of Residual Stresses in Differently Deep Rolled Surface Layers of Steel SAE 1045

2021 ◽  
Author(s):  
Stephanie Saalfeld ◽  
Thomas Wegener ◽  
Berthold Scholtes ◽  
Thomas Niendorf
Keyword(s):  
Thermal Stability ◽  
Elevated Temperature ◽  
Residual Stresses ◽  
Elevated Temperatures ◽  
Fatigue Behavior ◽  
Decisive Role ◽  
Deep Rolling ◽  
Material Conditions ◽  
The Stability ◽  
Thermal Stability Of

AbstractThe stability of compressive residual stresses generated by deep rolling plays a decisive role on the fatigue behavior of specimens and components, respectively. In this regard, deep rolling at elevated temperature has proven to be very effective in stabilizing residual stresses when fatigue analysis is conducted at ambient temperature. However, since residual stresses can be affected not only by plastic deformation but also when thermal energy is provided, it is necessary to analyze the influence of temperature and time on the relaxation behavior of residual stresses at elevated temperature. To evaluate the effect of deep rolling at elevated temperatures on stability limits under thermal as well as combined thermo-mechanical loads, the present work introduces and discusses the results of investigations on the thermal stability of residual stresses in differently deep rolled material conditions of the steel SAE 1045.

Nanoindentation in Metallic Glasses with Different Plasticity

2015 ◽  
Vol 662 ◽  
pp. 19-22
Author(s):  
Kornel Csach ◽  
Jozef Miškuf ◽  
Alena Juríková ◽  
Maria Hurakova ◽  
Václav Ocelík ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Metallic Glasses ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Glass Forming Ability ◽  
Glass Forming ◽  
Thermal Stability Of

Nanoindentation and thermomechanical experiments on three types of metallic glasses with different glass forming ability were carried out. The nanoindentation behaviour at room temperature was associated with the creep at elevated temperatures. Different discontinuity populations and their shape observed on the nanoindentation loading curves were compared with morphology of plastic deformed indent regions. The influence of the differences in thermal stability of studied alloys on the nanoindentation in these alloys were studied as well.

Thermal stability of the layered modification of Cu0.5ZrTe2 in the temperature range 25–900 °C

2018 ◽  
Vol 74 (9) ◽  
pp. 1020-1025 ◽  
Author(s):  
E. G. Shkvarina ◽  
A. A. Titov ◽  
A. S. Shkvarin ◽  
J. R. Plaisier ◽  
L. Gigli ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Room Temperature ◽  
Interlayer Space ◽  
Intercalation Compound ◽  
Rhombohedral Phase ◽  
Time Resolved ◽  
Temperature Range ◽  
Tetrahedral Sites ◽  
The Stability ◽  
Thermal Stability Of

The thermal stability of the layered modification of the Cu0.5ZrTe2 polycrystalline intercalation compound, synthesized at room temperature, has been studied in the temperature range 25–900 °C. A change in the occupation of the octahedral and tetrahedral coordinated sites in the interlayer space of the zirconium ditelluride was observed using in-situ time-resolved synchrotron X-ray powder diffraction experiments. The formation of the rhombohedral CuZr2Te4 phase, which is stable in the temperature range 300–700 °C, has been observed. The copper intercalation at room temperature leads to the formation of a phase in which the Cu atoms occupy only octahedral sites in the interlayer space. At temperatures above the decay temperature of the rhombohedral CuZr2Te4, a layered phase with Cu atoms uniformly distributed between octahedral and tetrahedral sites in the interlayer space is stable. The changes in the crystal structure independent of temperature are in agreement with the previously proposed model, according to which the stability of the layered or the rhombohedral phase is determined by the entropy factor associated with the distribution of the intercalated atoms between the octahedral and tetrahedral sites in the interlayer space.

Effect of Bi Addition on Thermal Stability and Tensile Ductility of Mg-3%Zn-0.4%Zr Alloy

2010 ◽  
Vol 654-656 ◽  
pp. 647-650
Author(s):  
Joong Hwan Jun ◽  
Min Ha Lee
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Elevated Temperature ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Tensile Ductility ◽  
Grain Structure ◽  
Hot Rolled ◽  
Thermal Stability Of ◽  
Zr Alloy

Thermal stability of  grains and tensile ductilities at room and elevated temperatures were investigated and compared for Mg-3%Zn-0.4%Zr and Mg-3%Zn-0.4%Zr-1%Bi alloys in hot-rolled state. The Bi-added alloy showed slightly finer-grained microstructure with enhanced thermal stability, which is closely associated with fine Mg-Bi compounds acting as obstacles for the migration of grain boundaries. The Mg-3%Zn-0.4%Zr-1%Bi alloy exhibited better tensile strength at room temperature and tensile ductilities at elevated temperature. Finer and more homogeneous grain structure with higher thermal stability would be responsible for the enhanced tensile properties in the Bi-added alloy.

Time and thermal stability of magnetic properties of amorphous Fe80TM3B17 alloys

1998 ◽  
Vol 08 (PR2) ◽  
pp. Pr2-63-Pr2-66 ◽  
Author(s):  
R. Varga ◽  
P. Vojtaník ◽  
A. Lovas
Keyword(s):  
Thermal Stability ◽  
Magnetic Properties ◽  
Thermal Stability Of

scholarly journals Thermal stability and diffusion characteristics of ultrathin amorphous carbon films grown on crystalline and nitrogenated silicon substrates by filtered cathodic vacuum arc deposition

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shengxi Wang ◽  
Anurag Roy ◽  
Kyriakos Komvopoulos
Keyword(s):  
Thermal Stability ◽  
Amorphous Carbon ◽  
Silicon Substrate ◽  
Elevated Temperatures ◽  
Carbon Films ◽  
Vacuum Arc ◽  
Cross Sectional ◽  
Prolonged Heating ◽  
Filtered Cathodic Vacuum Arc ◽  
Thermal Stability Of

AbstractAmorphous carbon (a-C) films are widely used as protective overcoats in many technology sectors, principally due to their excellent thermophysical properties and chemical inertness. The growth and thermal stability of sub-5-nm-thick a-C films synthesized by filtered cathodic vacuum arc on pure (crystalline) and nitrogenated (amorphous) silicon substrate surfaces were investigated in this study. Samples of a-C/Si and a-C/SiNx/Si stacks were thermally annealed for various durations and subsequently characterized by high-resolution transmission electron microscopy (TEM) and electron energy loss spectroscopy (EELS). The TEM images confirmed the continuity and uniformity of the a-C films and the 5-nm-thick SiNx underlayer formed by silicon nitrogenation using radio-frequency sputtering. The EELS analysis of cross-sectional samples revealed the thermal stability of the a-C films and the efficacy of the SiNx underlayer to prevent carbon migration into the silicon substrate, even after prolonged heating. The obtained results provide insight into the important attributes of an underlayer in heated multilayered media for preventing elemental intermixing with the substrate, while preserving the structural stability of the a-C film at the stack surface. An important contribution of this investigation is the establishment of an experimental framework for accurately assessing the thermal stability and elemental diffusion in layered microstructures exposed to elevated temperatures.

scholarly journals Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Aleksandra Kozłowska ◽  
Adam Grajcar ◽  
Aleksandra Janik ◽  
Krzysztof Radwański ◽  
Ulrich Krupp ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Retained Austenite ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Mechanical Stability ◽  
Electron Backscatter Diffraction ◽  
Cost Effective ◽  
Tensile Tests ◽  
Thermal Stability Of

AbstractAdvanced medium-Mn sheet steels show an opportunity for the development of cost-effective and light-weight automotive parts with improved safety and optimized environmental performance. These steels utilize the strain-induced martensitic transformation of metastable retained austenite to improve the strength–ductility balance. The improvement of mechanical performance is related to the tailored thermal and mechanical stabilities of retained austenite. The mechanical stability of retained austenite was estimated in static tensile tests over a wide temperature range from 20 °C to 200 °C. The thermal stability of retained austenite during heating at elevated temperatures was assessed by means of dilatometry. The phase composition and microstructure evolution were investigated by means of scanning electron microscopy, electron backscatter diffraction, X-ray diffraction and transmission electron microscopy techniques. It was shown that the retained austenite stability shows a pronounced temperature dependence and is also stimulated by the manganese addition in a 3–5% range.

Sign in / Sign up

Export Citation Format

Share Document