scholarly journals Reorientation of Misfit Dislocations During Annealing in InGaAs/GaAs(001) Interfaces

1993 ◽  
Vol 308 ◽  
Author(s):  
Y. Chen ◽  
Z. Liliental-Weber ◽  
J. Washburn ◽  
J.F. Klem ◽  
J.Y. Tsao
Keyword(s):  
Strain Relaxation ◽  
Dislocation Line ◽  
Line Tension ◽  
Misfit Strain ◽  
Relaxation Mechanism ◽  
Misfit Dislocations ◽  
Burgers Vector ◽  
Transmission Electron ◽  
Edge Component ◽  
Interfacial Plane

ABSTRACTTransmission electron microscopy is applied to investigate the effect of post-annealing on misfit dislocations in an In0.2Ga0.8As/GaAs(001) heterostructure. An orthogonal array of 60º dislocations along [110] and [110] directions was observed in the interfaces of the samples grown by MBE at 520 ºC. When the as-grown samples were annealed at temperatures ranging from 600 to 800 ºC, the 60º dislocations were gradually reoriented by dislocation reactions occurring at the 90º intersections followed by nonconservative motion driven by dislocation line tension and the residual elastic misfit strain. The final result of this process was a dislocation array lying along [100] and [010] directions. The reoriented u=<100> dislocation has a Burgers vector , which is the same as that of 60º dislocation, but the edge component of its Burgers vector in the (001) interfacial plane is larger than that of 60º dislocation by a factor of , resulting in a greater contribution to elastic strain relaxation. This nonconservative reorientation of 60º dislocations to form the u=<100> dislocations represents a new strain relaxation mechanism in diamond or zinc blende semiconductor heterostructures.

Mechanisms of misfit strain relaxation in epitaxially grown BLT (Bi4-xLaxTi3O12, x = 0.75) thin films

2003 ◽  
Vol 779 ◽  
Author(s):  
Hyung Seok Kim ◽  
Sang Ho Oh ◽  
Ju Hyung Suh ◽  
Chan Gyung Park
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Strain Relaxation ◽  
Lattice Misfit ◽  
Misfit Strain ◽  
Misfit Dislocations ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
20 Nm

AbstractMechanisms of misfit strain relaxation in epitaxially grown Bi4-xLaxTi3O12 (BLT) thin films deposited on SrTiO3 (STO) and LaAlO3 (LAO) substrates have been investigated by means of transmission electron microscopy (TEM). The misfit strain of 20 nm thick BLT films grown on STO substrate was relaxed by forming misfit dislocations at the interface. However, cracks were observed in 100 nm thick BLT films grown on the same STO. It was confirmed that cracks were formed because of high misfit strain accumulated with increasing the thickness of BLT, that was not sufficiently relaxed by misfit dislocations. In the case of the BLT film grown on LAO substrate, the magnitude of lattice misfit between BLT and LAO was very small (~1/10) in comparison with the case of the BLT grown on STO. The relatively small misfit strain formed in layered structure of the BLT films on LAO, therefore, was easily relaxed by distorting the film, rather than forming misfit dislocations or cracks, resulting in misorientation regions in the BLT film.

Strain Relaxation in GaN/AlN Films Grown on Vicinal and On-Axis SiC Substrates

2006 ◽  
Vol 527-529 ◽  
pp. 1513-1516
Author(s):  
J. Bai ◽  
X. Huang ◽  
Balaji Raghothamachar ◽  
Michael Dudley ◽  
B. Wagner ◽  
...  
Keyword(s):  
High Resolution ◽  
Lattice Mismatch ◽  
Strain Relaxation ◽  
Crystalline Quality ◽  
Misfit Dislocations ◽  
Vicinal Surface ◽  
Burgers Vector ◽  
Surface Steps ◽  
Transmission Electron ◽  
Initial Stage

Strain relaxation in the GaN/AlN/6H-SiC epitaxial system grown by vicinal surface epitaxy (VSE) is investigated and compared with that in on-axis epitaxy. High resolution x-ray diffraction (HRXRD) measurements show that GaN films grown by VSE have improved crystalline quality. High resolution transmission electron microscope (HRTEM) studies reveal that there are two types of misfit dislocations (MDs) at AlN/6H-SiC interfaces: 60˚ complete dislocations along <1120 > directions with Burgers vector 1/3<1120 > and 60˚ Shockley partials along <10 10 > directions with Burgers vector 1/3<10 10 >. The latter are usually geometrical partial misfit dislocations (GPMDs) that are dominant in VSE to accommodate the lattice mismatch and stacking sequence mismatch simultaneously. In VSE, it is the high-density GPMDs formed at the vicinal surface steps that facilitate rapid strain relaxation at the initial stage of deposition and hence lead to superior crystalline quality of the subsequently grown GaN films.

Tem Assessment of Defects in (CdHg)Te Heterostructures

1990 ◽  
Vol 216 ◽  
Author(s):  
S.G. Lawson-Jack ◽  
I.P. Jones ◽  
D.J. Williams ◽  
M.G. Astles
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Buffer Layer ◽  
High Density ◽  
Misfit Dislocations ◽  
Cross Sectional ◽  
Burgers Vector ◽  
Density Of Dislocations ◽  
Transmission Electron ◽  
Interfacial Plane

ABSTRACTTransmission electron microscopy has been used to assess the defect contents of the various layers and interfaces in (CdHg) Te heterostructures. Examination of cross sectional specimens of these materials suggests that the density of misfit dislocations at the interfaces is related to the layer thicknesses, and that the high density of dislocations which are generated at the GaAs/CdTe interface are effectively prevented from penetrating into the CdHgTe epilayer by a 3um thick buffer layer. The majority of the dislocations in the layers were found to have a Burgers vector b = a/2<110> and either lie approximately parallel or inclined at an angle of ∼ 60° to the interfacial plane.

Strain Relaxation of Self-nanostructured Solution Derived La0.7Sr0.3MnO3 Films

2009 ◽  
Vol 1174 ◽  
Author(s):  
Patricia Abellan ◽  
Sandiumenge Felip ◽  
Cesar Moreno ◽  
Marie-Jose Casanove ◽  
Teresa Puig ◽  
...  
Keyword(s):  
Microstructural Evolution ◽  
Strain Relaxation ◽  
Scanning Force Microscopy ◽  
Misfit Strain ◽  
Relaxation Mechanism ◽  
Space Mapping ◽  
Reciprocal Space ◽  
Reciprocal Space Mapping ◽  
Transmission Electron ◽  
Scanning Force

AbstractThe morphological and microstructural evolution associated with an exsolution driven self-nanostructuration process of La0.7Sr0.3MnO3 films, is investigated using scanning force microscopy, reciprocal space mapping and transmission electron microscopy. The focus is placed on the misfit strain relaxation mechanism. Surfaces with atomically flat terraces are already developed after 1hour at 1000 °C while first fingerprints of phase exsolution do not appear until 9-10 hours. X-ray diffraction reciprocal-space mapping reveals that 24 nm thick films remain strained during the whole microstructural evolution, while 12 hour annealed films undergo almost total plastic relaxation of the misfit strain at a thickness of 60 nm. Overall, these results point to a kinetic limitation of dislocation mechanisms. It is argued that chemical relaxation provides a significant contribution to misfit strain relief.

Strain Relaxation Via Interface Nucleation of Misfit Dislocations in Intermixing Layers

1992 ◽  
Vol 263 ◽  
Author(s):  
Hyo-Hoon Park ◽  
Jung Kee Lee ◽  
El-Hang Lee ◽  
Jeong Yong Lee ◽  
Soon-Ku Hong
Keyword(s):  
Electron Microscopy ◽  
Homogeneous Nucleation ◽  
Critical Thickness ◽  
Strain Relaxation ◽  
Relaxation Mechanism ◽  
Semiconductor Heterostructures ◽  
Misfit Dislocations ◽  
Partial Dislocations ◽  
Transmission Electron ◽  
Lattice Matched

ABSTRACTThe strain relaxation mechanism via the homogeneous nucleation of misfit dislocations from interface during interdiffusion in lattice-matched semiconductor heterostructures has been investigated. Transmission electron microscopy studies in intermixed GaInAsP/InP heterostructures revealed that the critical interdiffusion depth for the nucleation of 90° 1/6<112> partial dislocations from a tensile interface is much shallower than that of 60° 1/2<110> perfect dislocations from a compressive interface. A critical thickness model for the interface nucleation of these dislocations is developed as a modification of the classical surface nucleation'model.

Transmission electron microscopy of misfit dislocation and strain relaxation in lattice mismatched III-V heterostructures versus substrate surface treatment

2011 ◽  
Vol 1324 ◽  
Author(s):  
Y. Wang ◽  
P. Ruterana ◽  
L. Desplanque ◽  
S. El Kazzi ◽  
X. Wallart
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Surface Treatment ◽  
Substrate Surface ◽  
Strain Relaxation ◽  
Dislocation Core ◽  
Misfit Dislocations ◽  
Heteroepitaxial Growth ◽  
Transmission Electron ◽  
Growth Initiation

ABSTRACTHigh resolution transmission electron microscopy in combination with geometric phase analysis is used to investigate the interface misfit dislocations, strain relaxation, and dislocation core behavior versus the surface treatment of the GaAs for the heteroepitaxial growth of GaSb. It is pointed out that Sb-rich growth initiation promotes the formation of a high quality network of Lomer misfit dislocations that are more efficient for strain relaxation.

Transition From Inclined to In-Plane 60° Misfit Dislocations in a Diffuse Interface

1993 ◽  
Vol 319 ◽  
Author(s):  
X. J. Ning ◽  
P. Pirouz
Keyword(s):  
Strain Relaxation ◽  
Classical Model ◽  
Diffuse Interface ◽  
Misfit Dislocations ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Plan View ◽  
Transmission Electron ◽  
Mechanisms Of Formation ◽  
Film Substrate

AbstractDespite tremendous activity during the last few decades in the study of strain relaxation in thin films grown on substrates of a dissimilar material, there are still a number of problems which are unresolved. One of these is the nature of misfit dislocations forming at the film/substrate interface: depending on the misfit, the dislocations constituting the interfacial network have predominantly either in-plane or inclined Burgers vectors. While, the mechanisms of formation of misfit dislocations with inclined Burgers vectors are reasonably well understood, this is not the case for in-plane misfit dislocations whose formation mechanism is still controversial. In this paper, misfit dislocations generated to relax the strains caused by diffusion of boron into silicon have been investigated by plan-view and crosssectional transmission electron microscopy. The study of different stages of boron diffusion shows that, as in the classical model of Matthews, dislocation loops are initially generated at the epilayer surface. Subsequently the threading segments expand laterally and lay down a segment of misfit dislocation at the diffuse interface. The Burgers vector of the dislocation loop is inclined with respect to the interface and thus the initial misfit dislocations are not very efficient. However, as the diffusion proceeds, non-parallel dislocations interact and give rise to product segments that have parallel Burgers vectors. Based on the observations, a model is presented to elucidate the details of these interactions and the formation of more efficient misfit dislocations from the less-efficient inclined ones.

The Roles of Stress, Geometry and Orientation on Misfit Dislocations Kinetics and Energetics in Epitaxial Strained Layers.

1991 ◽  
Vol 239 ◽  
Author(s):  
R. Hull ◽  
J. C. Bean ◽  
F. Ross ◽  
D. Bahnck ◽  
L. J. Pencolas
Keyword(s):  
Misfit Dislocation ◽  
Lattice Mismatch ◽  
Strain Relaxation ◽  
Misfit Dislocations ◽  
Slip Systems ◽  
Strained Layers ◽  
Burgers Vector ◽  
Partial Dislocations ◽  
Strain Stress ◽  
Kinetics Of

ABSTRACTThe geometries, microstructures, energetics and kinetics of misfit dislocations as functions of surface orientation and the magnitude of strain/stress are investigated experimentally and theoretically. Examples are drawn from (100), (110) and (111) surfaces and from the GexSi1–x/Si and InxGa1–x/GaAs systems. It is shown that the misfit dislocation geometries and microstructures at lattice mismatch stresses < - 1GPa may in general be predicted by operation of the minimum magnitude Burgers vector slipping on the widest spaced planes. At stresses of the order several GPa, however, new dislocation systems may become operative with either modified Burgers vectors or slip systems. Dissociation of totál misfit dislocations into partial dislocations is found to play a crucial role in strain relaxation, on surfaces other than (100) under compressive stress.

Structural Studies Of Epitaxial CdF2 Layers on Si(111)

1996 ◽  
Vol 441 ◽  
Author(s):  
A. Yu. Khilko ◽  
R. N. Kyutt ◽  
G. N. Mosina ◽  
N. S. Sokolov ◽  
Yu. V. Shusterman ◽  
...  
Keyword(s):  
Strain Relaxation ◽  
Optimal Growth ◽  
Misfit Strain ◽  
X Ray Diffraction ◽  
Optimal Growth Temperature ◽  
Light Emitting ◽  
X Ray ◽  
Light Emitting Devices ◽  
Transmission Electron

AbstractEpitaxial CdF2 layers, which may be used in light-emitting devices integrated with silicon, were grown by Molecular Beam Epitaxy (MBE). Characterization of the layers by Rutherford Backscattering Spectroscopy (RBS), X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM) showed that optimal growth temperature lies in the range 60–80°C. The sticking coefficient of CdF2 molecules was found to decrease at temperatures above 100°C. Different modes of misfit strain relaxation were observed above and below that temperature.

Misfit Dislocations and Elastic Relaxation

1995 ◽  
Vol 399 ◽  
Author(s):  
H.P Strunk ◽  
S. Christiansen ◽  
M. Albrecht
Keyword(s):  
Driving Forces ◽  
Maximum Shear Stress ◽  
Strain Tensor ◽  
Three Dimensional ◽  
Local Strain ◽  
Misfit Strain ◽  
Relaxation Mechanism ◽  
Misfit Dislocations ◽  
Thermodynamical Equilibrium ◽  
Three Dimensional Finite Element

ABSTRACTPrior to relaxation of misfit strain by formation of misfit dislocations, a growing heteroepitaxial layer can relax elastically by forming surface undulations called ripples. With increasing amplitude of the ripples the misfit strain and thus stress fields grow markedly inhomogeneous, and dislocation formation may thus be triggered in areas of maximum shear stress. The surface directly above such a new dislocation then represents a band of preferential growth and develops into a ridge, which in turn redistributes the strain in the growing layer. This interwoven elastic/plastic relaxation mechanism can comparably easily be deduced from transmission electron and atomic force microscopy studies of SiGe layers grown onto silicon by liquid phase epitaxy. This growth technique exerts only very small driving forces and thus operates very near thermodynamical equilibrium. The local strain tensor and strain energy density are calculated for the actual layer geometries by three dimensional finite element method and provide for quantification of the mechanism.

Sign in / Sign up

Export Citation Format

Share Document