Transition From Inclined to In-Plane 60° Misfit Dislocations in a Diffuse Interface

1993 ◽  
Vol 319 ◽  
Author(s):  
X. J. Ning ◽  
P. Pirouz
Keyword(s):  
Strain Relaxation ◽  
Classical Model ◽  
Diffuse Interface ◽  
Misfit Dislocations ◽  
Dislocation Loops ◽  
Boron Diffusion ◽  
Plan View ◽  
Transmission Electron ◽  
Mechanisms Of Formation ◽  
Film Substrate

AbstractDespite tremendous activity during the last few decades in the study of strain relaxation in thin films grown on substrates of a dissimilar material, there are still a number of problems which are unresolved. One of these is the nature of misfit dislocations forming at the film/substrate interface: depending on the misfit, the dislocations constituting the interfacial network have predominantly either in-plane or inclined Burgers vectors. While, the mechanisms of formation of misfit dislocations with inclined Burgers vectors are reasonably well understood, this is not the case for in-plane misfit dislocations whose formation mechanism is still controversial. In this paper, misfit dislocations generated to relax the strains caused by diffusion of boron into silicon have been investigated by plan-view and crosssectional transmission electron microscopy. The study of different stages of boron diffusion shows that, as in the classical model of Matthews, dislocation loops are initially generated at the epilayer surface. Subsequently the threading segments expand laterally and lay down a segment of misfit dislocation at the diffuse interface. The Burgers vector of the dislocation loop is inclined with respect to the interface and thus the initial misfit dislocations are not very efficient. However, as the diffusion proceeds, non-parallel dislocations interact and give rise to product segments that have parallel Burgers vectors. Based on the observations, a model is presented to elucidate the details of these interactions and the formation of more efficient misfit dislocations from the less-efficient inclined ones.

Defect Generation And Evolution In The Hydrothermal Growth Of Epitaxial BaTiO3 Thin Films

1997 ◽  
Vol 474 ◽  
Author(s):  
L. Zhao ◽  
A. T. Chien ◽  
F. F. Lange ◽  
J. S. Speck
Keyword(s):  
Thin Films ◽  
Cross Section ◽  
Interfacial Layer ◽  
Dislocation Network ◽  
Misfit Dislocations ◽  
Plan View ◽  
Transmission Electron ◽  
Defects Analysis ◽  
Film Substrate ◽  
Growth Evolution

ABSTRACTThe structure of epitaxial BaTiO3 thin films prepared by hydrothermal synthesis on (001) SrTiO3 substrates was studied by transmission electron microscopy (TEM). The growth evolution was followed from initial island formation, through island impingement and fusion. Plan view and cross-section imaging demonstrated that the films grew by an unusual islanding mechanism. Electron diffraction showed the islands and the fully formed film are single crystal with mosaic character and in all cases strain relaxed. Cross-section TEM of the early growth films showed a several monolayer thick interfacial layer and the film/substrate region had no misfit dislocations. In the fully formed films, this interfacial layer was not observed, however a clear misfit dislocation network was observed. Defects analysis shows that the misfit dislocations have pure edge character with <100> Une directions, and <010> Burgers vectors (parallel to the film/substrate interface).

Strain Relaxation in GaAs on Si by Two Groups of Misfit Dislocations

1995 ◽  
Vol 399 ◽  
Author(s):  
M. Tamura ◽  
T. Saitoh ◽  
T. Yodo
Keyword(s):  
Strain Relaxation ◽  
Lattice Misfit ◽  
Misfit Dislocations ◽  
Cross Sectional ◽  
Plan View ◽  
Partial Dislocations ◽  
Group I ◽  
Transmission Electron ◽  
Before And After ◽  
Gaas Films

ABSTRACTHigh-resolution cross-sectional and conventional plan-view transmission electron microscope observations have been carried out for molecular beam epitaxially grown GaAs films on vicinal Si (001) as a function of film thicknesses and observation directions between two orthogonal <110> directions before and after annealing. Two groups of misfit dislocations are characterized by analyzing whether their extra half planes exist in the film and the substrate side. The group I misfit dislocations due to a stress caused by a lattice misfit between GaAs and Si consist of partial and, 60° and 90° complete dislocations in an as-grown state. After annealing partial dislocations almost disappear and 90° perfect dislocations are predominantly observed. The group II misfit dislocations due to a thermal-expansion misfit-induced stress are all of the 60° type complete dislocations, independent of film thickness and annealing.

Strain Relaxation Mechanisms in He+-Implanted and Annealed Si1−xGex Layers on Si(001) Substrates

2001 ◽  
Vol 686 ◽  
Author(s):  
S.H. Christiansen ◽  
P.M. Mooney ◽  
J.O. Chu ◽  
A. Grill
Keyword(s):  
Misfit Dislocation ◽  
Strain Relaxation ◽  
Three Dimensional ◽  
Dislocation Network ◽  
Misfit Dislocations ◽  
Dislocation Loops ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
Transmission Electron ◽  
Microscopy Techniques

AbstractStrain relaxation in He+-implanted and annealed Si(001)/Si1−xGex heterostructures was investigated using transmission electron microscopy techniques and x-ray diffraction. Depending on the implant conditions, bubbles and/or platelets form below the Si/Si1−xGex interface upon annealing and act as nucleation sources for dislocation loops. The dislocation loops extend to the interface and form a misfit dislocation network there, resulting in relaxation of 30-80% of the strain in layers as thin as 100-300 nm. When bubbles form close to the interface, dislocations nucleate by a climb loop mechanism. When smaller bubbles form deeper in the Si substrate an irregular three-dimensional dislocation network forms below the interface resulting in an irregular misfit dislocation network at the interface. When platelets form deeper in the Si substrate, prismatic punching of dislocation loops is observed and dislocation reactions of misfit dislocations at the interface result in Lomer dislocation formation.

Solute Segregation and Dynamics of Solid-Phase Crystallization In in and Sb-Implanted Silicon

1981 ◽  
Vol 4 ◽  
Author(s):  
J. Narayan ◽  
G. L. Olson ◽  
O. W. Holland
Keyword(s):  
Laser Power ◽  
Solid Phase ◽  
Solute Segregation ◽  
Dislocation Loops ◽  
Solid Phase Crystallization ◽  
Time Resolved ◽  
Plan View ◽  
Ion Channeling ◽  
Retrograde Solubility ◽  
Transmission Electron

ABSTRACTTime-resolved-reflectivity measurements have been combined with transmission electron microscopy (cross-section and plan-view), Rutherford backscattering and ion channeling techniques to study the details of laser induced solid phase epitaxial growth in In+ and Sb+ implanted silicon in the temperature range from 725 to 1500 °K. The details of microstructures including the formation of polycrystals, precipitates, and dislocations have been correlated with the dynamics of crystallization. There were limits to the dopant concentrations which could be incorporated into substitutional lattice sites; these concentrations exceeded retrograde solubility limits by factors up to 70 in the case of the Si-In system. The coarsening of dislocation loops and the formation of a/2<110>, 90° dislocations in the underlying dislocation-loop bands are described as a function of laser power.

Transmission electron microscopy of misfit dislocation and strain relaxation in lattice mismatched III-V heterostructures versus substrate surface treatment

2011 ◽  
Vol 1324 ◽  
Author(s):  
Y. Wang ◽  
P. Ruterana ◽  
L. Desplanque ◽  
S. El Kazzi ◽  
X. Wallart
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Surface Treatment ◽  
Substrate Surface ◽  
Strain Relaxation ◽  
Dislocation Core ◽  
Misfit Dislocations ◽  
Heteroepitaxial Growth ◽  
Transmission Electron ◽  
Growth Initiation

ABSTRACTHigh resolution transmission electron microscopy in combination with geometric phase analysis is used to investigate the interface misfit dislocations, strain relaxation, and dislocation core behavior versus the surface treatment of the GaAs for the heteroepitaxial growth of GaSb. It is pointed out that Sb-rich growth initiation promotes the formation of a high quality network of Lomer misfit dislocations that are more efficient for strain relaxation.

Type II Dislocation Loops and their Effect on Strain in Ion Implanted Silicon as Studied by High Resolution X-ray Diffraction

1995 ◽  
Vol 378 ◽  
Author(s):  
R. H. Thompson ◽  
V. Krishnamoorthy ◽  
J. Liu ◽  
K. S. Jones
Keyword(s):  
High Resolution ◽  
Type Ii ◽  
Dislocation Loops ◽  
X Ray Diffraction ◽  
Empirical Constant ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Measured Strain ◽  
P Type

AbstractP-type (100) silicon wafers were implanted with 28Si+ ions at an energy of 50 keV and to doses of 1 × 1015, 5 × 1015 and 1 × 1016 cm−2, respectively, and annealed in a N2 ambient at temperatures ranging from 700°C to 1000°C for times ranging from 15 minutes to 16 hours. The resulting microstructure consisted of varying distributions of Type II end of range dislocation loops. The size distribution of these loops was quantified using plan-view transmission electron microscopy and the strain arising from these loops was investigated using high resolution x-ray diffraction. The measured strain values were found to be constant in the loop coarsening regime wherein the number of atoms bound by the loops remained a constant. Therefore, an empirical constant of 7.7 × 10−12 interstitial/ppm of strain was evaluated to relate the number of interstitials bound by these dislocation loops and the strain. This value was used successfully in estimating the number of interstitials bound by loops at the various doses studied provided the annealing conditions were such that the loop microstructure was in the coarsening or dissolution regime.

Mechanisms of misfit strain relaxation in epitaxially grown BLT (Bi4-xLaxTi3O12, x = 0.75) thin films

2003 ◽  
Vol 779 ◽  
Author(s):  
Hyung Seok Kim ◽  
Sang Ho Oh ◽  
Ju Hyung Suh ◽  
Chan Gyung Park
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Strain Relaxation ◽  
Lattice Misfit ◽  
Misfit Strain ◽  
Misfit Dislocations ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
20 Nm

AbstractMechanisms of misfit strain relaxation in epitaxially grown Bi4-xLaxTi3O12 (BLT) thin films deposited on SrTiO3 (STO) and LaAlO3 (LAO) substrates have been investigated by means of transmission electron microscopy (TEM). The misfit strain of 20 nm thick BLT films grown on STO substrate was relaxed by forming misfit dislocations at the interface. However, cracks were observed in 100 nm thick BLT films grown on the same STO. It was confirmed that cracks were formed because of high misfit strain accumulated with increasing the thickness of BLT, that was not sufficiently relaxed by misfit dislocations. In the case of the BLT film grown on LAO substrate, the magnitude of lattice misfit between BLT and LAO was very small (~1/10) in comparison with the case of the BLT grown on STO. The relatively small misfit strain formed in layered structure of the BLT films on LAO, therefore, was easily relaxed by distorting the film, rather than forming misfit dislocations or cracks, resulting in misorientation regions in the BLT film.

Strain Relaxation in GaN/AlN Films Grown on Vicinal and On-Axis SiC Substrates

2006 ◽  
Vol 527-529 ◽  
pp. 1513-1516
Author(s):  
J. Bai ◽  
X. Huang ◽  
Balaji Raghothamachar ◽  
Michael Dudley ◽  
B. Wagner ◽  
...  
Keyword(s):  
High Resolution ◽  
Lattice Mismatch ◽  
Strain Relaxation ◽  
Crystalline Quality ◽  
Misfit Dislocations ◽  
Vicinal Surface ◽  
Burgers Vector ◽  
Surface Steps ◽  
Transmission Electron ◽  
Initial Stage

Strain relaxation in the GaN/AlN/6H-SiC epitaxial system grown by vicinal surface epitaxy (VSE) is investigated and compared with that in on-axis epitaxy. High resolution x-ray diffraction (HRXRD) measurements show that GaN films grown by VSE have improved crystalline quality. High resolution transmission electron microscope (HRTEM) studies reveal that there are two types of misfit dislocations (MDs) at AlN/6H-SiC interfaces: 60˚ complete dislocations along <1120 > directions with Burgers vector 1/3<1120 > and 60˚ Shockley partials along <10 10 > directions with Burgers vector 1/3<10 10 >. The latter are usually geometrical partial misfit dislocations (GPMDs) that are dominant in VSE to accommodate the lattice mismatch and stacking sequence mismatch simultaneously. In VSE, it is the high-density GPMDs formed at the vicinal surface steps that facilitate rapid strain relaxation at the initial stage of deposition and hence lead to superior crystalline quality of the subsequently grown GaN films.

Structural properties of molecular beam epitaxy grown Ni/Pt superlattices

1997 ◽  
Vol 12 (1) ◽  
pp. 161-174 ◽  
Author(s):  
W. Staiger ◽  
A. Michel ◽  
V. Pierron-Bohnes ◽  
N. Hermann ◽  
M. C. Cadeville
Keyword(s):  
Molecular Beam ◽  
Growth Direction ◽  
Misfit Dislocations ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Superlattice Peak ◽  
Diffraction Peaks ◽  
Diffraction Patterns

We find that the [Ni3.2nmPt1.6nm] × 15 and [Ni3.2nmPt0.8nm] × 15 multilayers are semicoherent and display a columnar morphology. From both the period of the moir’e fringes and the positions of the diffraction peaks in electronic (plan-view and crosssection geometries) and x-ray diffraction patterns, one deduces that the nickel is relaxed (at least in the error bars of all our measurements), whereas the platinum remains slightly strained (≈−1%). The interfaces are sharp; no intermixing takes place giving rise to neat contrasts in transmission electron microscopy (TEM) and to high intensities of the superlattice peaks in the growth direction in both diffraction techniques. The relaxation of the interfacial misfit occurs partially through misfit dislocations, partially through the strain of platinum. A quasiperiodic twinning occurs at the interfaces, the stacking fault which forms the twin being the most often located at the interface Pt/Ni, i.e., when a Pt layer begins to grow on the Ni layer. The simulation of the θ/2θ superlattice peak intensities takes into account the columnar microstructure. It shows that the roughness is predominantly at medium scale with a fluctuation of about 12.5% for Ni layers and negligible for Pt layers.

Stability And Precipitation Kinetics In Si1-yCy/Si and Si1-x-yGexC/Si Heterostructures Prepared by Solid Phase Epitaxy

1993 ◽  
Vol 321 ◽  
Author(s):  
J. W. Strane ◽  
S. T. Picraux ◽  
H. J. Stein ◽  
S. R. Lee ◽  
J. Candelaria ◽  
...  
Keyword(s):  
Structural Changes ◽  
Driving Forces ◽  
Solid Phase ◽  
Strain Relaxation ◽  
Solid Phase Epitaxy ◽  
Extended Defects ◽  
Plan View ◽  
Nucleation Barrier ◽  
Transmission Electron ◽  
The Stability

ABSTRACTThis study investigates the stability of Metastable Si1-yCy/Si heterostructures during rapid thermal annealing (RTA) over a temperature range of 1000 – 1150° C Heterostructures of Si1-yCy/Si and Si1-x-yGexCy/Si (x=0.077, y ≤ .0014) were formed by solid phase epitaxy from C implanted, preamorphized substrates using a 30 Minute 700° C anneal in N2. The occupancy of C in substitution lattice sites was monitored by Fourier Transform Infrared Absorption spectroscopy. The layer strain was monitored by rocking curve x-ray diffraction and the structural changes in the layers were determined using plan-view and X-sectional transmission electron Microscopy (TEM). For anneals of 1150° C or above, all the substitutional C was lost from the Si lattice after 30 seconds. TEM verified that the strain relaxation was the result of C precipitating into highly aligned βSiC particles rather than by the formation of extended defects. No nucleation barrier was observed for the loss of substitutional C Preliminary results will also be discussed for Si1-x-yGexCy/Si heterostructures where there is the additional factor of the competition between strain energy and the chemical driving forces.

Sign in / Sign up

Export Citation Format

Share Document