Synthesis and Raman Spectra of Cupric Oxide Quantum Dots

1999 ◽  
Vol 571 ◽  
Author(s):  
J.F. Xu ◽  
W. Ji ◽  
Z.X. Shen ◽  
S.H. Tang ◽  
X.R. Ye ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Raman Spectra ◽  
Single Phase ◽  
Cupric Oxide ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
Diffraction Peaks

ABSTRACTWe have synthesised CuO quantum dots by using a method of one-step solid state reaction under ambient conditions, and investigated them by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Raman scattering technique. The XRD shows that the sample is composed of single phase CuO with a monoclinic structure. The particle size estimated from the x-ray diffraction peaks is about 12 nm, consistent with the TEM result. The Raman spectra show that there are three Raman peaks at 282, 332 and 618 cm−1, which are much broader and shifted several cm−l to lower frequencies in comparison with those of bulk CuO crystal. The temperature dependence of the Raman spectra in the range 77–873 K is also presented.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

scholarly journals Low-temperature hydrothermal synthesis of hierarchical flower-like CuB2O4 superstructures

2020 ◽  
Vol 14 (2) ◽  
pp. 113-118
Author(s):  
Daniel Ursu ◽  
Anamaria Dabici ◽  
Marinela Miclau ◽  
Nicolae Miclau
Keyword(s):  
Thermal Stability ◽  
Low Temperature ◽  
Self Assembly ◽  
Hydrothermal Solution ◽  
Optical Measurements ◽  
Oriented Attachment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

We report for the first time the fabrication of hierarchical ordered superstructure CuB2O4 with flower-like morphology via a one-step, low temperature hydrothermal method. The tetragonal structure of CuB2O4 was determined by X-ray diffraction and high-resolution transmission electron microscopy. Optical measurements attested of the quality of the fabricated CuB2O4 and high temperature X-ray diffraction confirmed its thermal stability up to 600 ?C. The oriented attachment growth and the hierarchical self-assembly of micrometer-sized platelets producing hierarchical superstructures with flower-like morphology are designed by pH of the hydrothermal solution. The excellent band gap, high thermal stability and hierarchical structure of the CuB2O4 are promising for the photovoltaic and photocatalytic applications.

Effects of Surface Energy on the Microstructures of Thin Sb Films

1990 ◽  
Vol 202 ◽  
Author(s):  
L. H. Chou ◽  
M. C. Kuo
Keyword(s):  
Electron Microscopy ◽  
Surface Energy ◽  
Grain Growth ◽  
Grain Orientation ◽  
Thermal Evaporation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Transmission Electron ◽  
Diffraction Peaks

ABSTRACTThin Sb films have been prepared on glass substrates by rapid thermal evaporation. Films with thicknesses varied from 260 Å to 1300Å were used for the study. X-ray diffraction data showed that for films deposited at room substrate temperature, an almost random grain orientation was observed for films of 1300 Å thick and a tendency for preferred grain orientation was observed as films got thinner. For films of 260 Å thick, only two x-ray diffraction peaks--(003) and (006) were observed. After thermal annealing, secondary grains grew to show preferred orientation in all the films. This phenomenon was explained by surface-energy-driven secondary grain growth. This paper reports the effects of annealing time and film thickness on the secondary grain growth and the evolution of thin Sb film microstmctures. Transmission electron microscopy (TEM) and x-ray diffraction were used to characterize the films.

Unveiling the Magnesium Storage Mechanisms of Co-Sputtered Indium-Tin Alloy Films Using Operando X-ray Diffraction

2021 ◽  
Author(s):  
Wenrun Cui ◽  
Meijia Song ◽  
Guixing Jia ◽  
Yu Wang ◽  
Wanfeng Yang ◽  
...  
Keyword(s):  
High Performance ◽  
Single Phase ◽  
Clear Understanding ◽  
X Ray Diffraction ◽  
Alloy Films ◽  
X Ray ◽  
Electrochemical Reactivity ◽  
One Step ◽  
Magnesium Ion Batteries ◽  
Pure Sn

Abstract Tin (Sn)-based anodes have drawn extensive attention for magnesium ion batteries (MIBs) owing to their low reaction potentials, high theoretical capacities, and compatibility with conventional electrolytes. However, their poor electrochemical reactivity, sluggish kinetics, and large volume changes have obstructed progresses. Additionally, a clear understanding of the Mg storage chemistry is crucial for the development of high-performance MIBs. Here, we prepared self-supporting In-Sn alloy films with different compositions and phase constitutions via a one-step magnetron co-sputtering. As benchmarked with pure Sn film, the single-phase and biphase In-Sn alloy films effectively trigger the alloying reaction of Sn with Mg and further increasing of In significantly improves the electrochemical reactivity of the In-Sn electrodes. More importantly, operando X-ray diffraction was performed to unveil the magnesiation/demagnesiation mechanisms of the In0.2Sn0.8, In0.2Sn0.8/In3Sn and In3Sn electrodes, showing that In0.2Sn0.8 and In3Sn display different Mg storage mechanisms when existing alone or biphase coexisting. Our findings highlight the significance of the electrode design and mechanism investigations for MIBs.

Optical properties and energy transfer processes in Tb3+-doped ZnSe quantum dots

2021 ◽  
Author(s):  
Nguyen Ca ◽  
N. D Vinh ◽  
Phan Van Do ◽  
N. T. Hien ◽  
Xuan Hoa Vu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Quantum Dots ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Wet Chemical Method ◽  
X Ray ◽  
Transfer Processes ◽  
Transmission Electron ◽  
Wet Chemical

Tb3+-doped ZnSe quantum dots (QDs) with Tb content in the range of 0.5 - 7% were successfully synthesized by a wet chemical method. X-ray diffraction (XRD) and transmission electron microscopy...

Microstructure characteristics of non-monodisperse quantum dots: on the potential of transmission electron microscopy combined with X-ray diffraction

CrystEngComm ◽  
2020 ◽  
Vol 22 (21) ◽  
pp. 3644-3655
Author(s):  
Stefan Neumann ◽  
Christina Menter ◽  
Ahmed Salaheldin Mahmoud ◽  
Doris Segets ◽  
David Rafaja
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Quantum Dots ◽  
Cdse Quantum Dots ◽  
X Ray Diffraction ◽  
X Ray ◽  
Microstructure Characteristics ◽  
Scale Bridging ◽  
Transmission Electron ◽  
Hot Injection

Capability of TEM and XRD to reveal scale-bridging information about the microstructure of non-monodisperse quantum dots is illustrated on the CdSe quantum dots synthesized using an automated hot-injection method.

scholarly journals Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 999
Author(s):  
Yi-An Chen ◽  
Kuo-Hsien Chou ◽  
Yi-Yang Kuo ◽  
Cheng-Ye Wu ◽  
Po-Wen Hsiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Particle Size ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Average Size ◽  
Alloy Quantum Dots ◽  
First Time

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn0.5Cd0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn0.5Cd0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)2]–OLA complex can be formed by a reaction between Zn(OAc)2 and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)2]–OLA complex. The results indicated that ZnO grew on the Zn0.5Cd0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn0.5Cd0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)2 and OLA could form a [Zn(OAc)2]–OLA complex, which inhibited the growth of the Zn0.5Cd0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)2 and Se2−, which led to a decrease in particle size.

scholarly journals A facile synthesis of a carbon-encapsulated Fe3O4 nanocomposite and its performance as anode in lithium-ion batteries

2013 ◽  
Vol 4 ◽  
pp. 699-704 ◽  
Author(s):  
Raju Prakash ◽  
Katharina Fanselau ◽  
Shuhua Ren ◽  
Tapan Kumar Mandal ◽  
Christian Kübel ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Lithium Ion ◽  
Iron Pentacarbonyl ◽  
X Ray Diffraction ◽  
Facile Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Lithium Ion Cell ◽  
Carbon Framework ◽  
One Step

A carbon-encapsulated Fe3O4 nanocomposite was prepared by a simple one-step pyrolysis of iron pentacarbonyl without using any templates, solvents or surfactants. The structure and morphology of the nanocomposite was investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Brunauer–Emmett–Teller analysis and Raman spectroscopy. Fe3O4 nanoparticles are dispersed intimately in a carbon framework. The nanocomposite exhibits well constructed core–shell and nanotube structures, with Fe3O4 cores and graphitic shells/tubes. The as-synthesized material could be used directly as anode in a lithium-ion cell and demonstrated a stable capacity, and good cyclic and rate performances.

Preparation and Property of Al87Ce3Ni8.5Mn1.5 Nanophase Amorphous Composites

2011 ◽  
Vol 412 ◽  
pp. 263-266
Author(s):  
Hong Wei Zhang ◽  
Li Li Zhang ◽  
Feng Rui Zhai ◽  
Jia Jin Tian ◽  
Can Bang Zhang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Phase ◽  
Volume Fraction ◽  
Material Structure ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Transmission Electron ◽  
Different Temperatures

The higher mechanical strength of Al87Ce3Ni8.5Mn1.5 nanophase amorphous composites has been obtained with two methods. The first nanophase amorphous composites are directly produced by the single roller spin quenching technology. The method taken for the second nanophase amorphous composites is at first to obtain amorphous single-phase alloy, followed by annealed at different temperatures .The formative condition, the microstructure, the particle size, the volume fraction of α-Al phase and microhardness of nanophase amorphous composites etc have been investigated and compared by X-ray diffraction (XRD) and transmission electron microscopy (TEM) and differential scanning calorimetry (DSC). The microstructure of composites produced by the second method is higher than the former, the fabricated material structure of the system is more uniform and the process is easier to control.

InAs Quantum Dots Grown on an AlGaAsSb Strain-Relief Buffer

2000 ◽  
Vol 642 ◽  
Author(s):  
A.L. Gray ◽  
L. R. Dawson ◽  
Y. Lin ◽  
A. Stintz ◽  
Y.-C. Xin ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Cross Section ◽  
Gaas Substrate ◽  
Buffer Layers ◽  
Threading Dislocations ◽  
X Ray Diffraction ◽  
Strain Relief ◽  
Inas Quantum Dots ◽  
X Ray ◽  
Transmission Electron

ABSTRACTAn In(Ga)As-based self-assembled quantum dot laser test structure grown on strain-relief Al0.5Ga0.5As1-ySby strain-relief buffer layers (0≤y ≤ 0.24) on a GaAs substrate is investigated in an effort to increase dot size and therefore extend the emission wavelength over conventional InAs quantum dots on GaAs platforms. Cross-section transmission electron microscopy, and high-resolution x-ray diffraction are used to monitor the dislocation filtering process and morphology in the buffer layers. Results show that the buffer layers act as an efficient dislocation filter by drastically reducing threading dislocations, thus providing a relaxed, low dislocation, compositionally modulated Al0.5Ga0.5Sb0.24As0.76 substrate for large (500Å height x 300Å width) defect -free InAs quantum dots. Photoluminescence shows a ground-state emission of the InAs quantum dots at 1.45 μm.

Sign in / Sign up

Export Citation Format

Share Document