scholarly journals COMPARATIVE ANALYSIS OF THREE-DIMENSIONAL NANOSTRUCTURE OF POROUS BIOCOMPATIBLE SCAFFOLDS MADE OF RECOMBINANT SPIDROIN AND SILK FIBROIN FOR REGENERATIVE MEDICINE

2015 ◽  
Vol 17 (2) ◽  
pp. 37-44 ◽  
Author(s):  
O. I. Agapova ◽  
A. E. Efimov ◽  
M. M. Moisenovich ◽  
V. G. Bogush ◽  
I. I. Agapov
Keyword(s):  
Volume Fraction ◽  
Three Dimensional ◽  
Scanning Probe ◽  
Porous Scaffolds ◽  
Volume Porosity ◽  
Integral Density ◽  
Regenerative Activity ◽  
Calculated Volume ◽  
Recombinant Spidroin

Aim.To perform a comparison of three-dimensional nanostructure of porous biocompatible scaffolds made of fibroinBombix moriand recombinant spidroin rS1/9.Materials and methods.Three-dimensional porous scaffolds were produced by salt leaching technique. The comparison of biological characteristics of the scaffolds shows that adhesion and proliferation of mouse fibroblastsin vitroon these two types of scaffolds do not differ significantly. Comparative experimentsin vivoshow that regeneration of bone tissue of rats is faster with implantation of recombinant spidroin scaffolds. Three-dimensional nanostructure of scaffolds and interconnectivity of nanopores were studied with scanning probe nanotomography (SPNT) to explain higher regenerative activity of spidroin-based scaffolds.Results.Significant differences were detected in the integral density and volume of pores: the integral density of nanopores detected on 2D AFM images is 46 μm–2    and calculated volume porosity is 24% in rS1/9-based scaffolds; in fibroin-based three-dimensional structures density of nanopores and calculated volume porosity were 2.4 μm–2  and 0.5%, respectively. Three-dimensional reconstruction system of nanopores and clusters of interconnected nanopores in rS1/9-based scaffolds showed that volume fraction of pores interconnected in percolation clusters is 35.3% of the total pore volume or 8.4% of the total scaffold volume.Conclusion.Scanning probe nanotomography method allows obtaining unique information about topology of micro – and nanopore systems of artificial biostructures. High regenerative activity of rS1/9-based scaffolds can be explained by higher nanoporosity of the scaffolds.

scholarly journals Porous Geometry Guided Micro-mechanical Environment Within Scaffolds for Cell Mechanobiology Study in Bone Tissue Engineering

2021 ◽  
Vol 9 ◽  
Author(s):  
Feihu Zhao ◽  
Yi Xiong ◽  
Keita Ito ◽  
Bert van Rietbergen ◽  
Sandra Hofmann
Keyword(s):  
Porous Scaffold ◽  
Mechanical Strain ◽  
Three Dimensional ◽  
Pore Geometry ◽  
Cell Physiology ◽  
Porous Scaffolds ◽  
Mechanical Environment ◽  
Functional Features ◽  
Future Work

Mechanobiology research is for understanding the role of mechanics in cell physiology and pathology. It will have implications for studying bone physiology and pathology and to guide the strategy for regenerating both the structural and functional features of bone. Mechanobiological studies in vitro apply a dynamic micro-mechanical environment to cells via bioreactors. Porous scaffolds are commonly used for housing the cells in a three-dimensional (3D) culturing environment. Such scaffolds usually have different pore geometries (e.g. with different pore shapes, pore dimensions and porosities). These pore geometries can affect the internal micro-mechanical environment that the cells experience when loaded in the bioreactor. Therefore, to adjust the applied micro-mechanical environment on cells, researchers can tune either the applied load and/or the design of the scaffold pore geometries. This review will provide information on how the micro-mechanical environment (e.g. fluid-induced wall shear stress and mechanical strain) is affected by various scaffold pore geometries within different bioreactors. It shall allow researchers to estimate/quantify the micro-mechanical environment according to the already known pore geometry information, or to find a suitable pore geometry according to the desirable micro-mechanical environment to be applied. Finally, as future work, artificial intelligent – assisted techniques, which can achieve an automatic design of solid porous scaffold geometry for tuning/optimising the micro-mechanical environment are suggested.

scholarly journals Development and AFM study of porous scaffolds for wound healing applications

2004 ◽  
Vol 18 (4) ◽  
pp. 587-596 ◽  
Author(s):  
T. A. Doneva ◽  
H. B. Yin ◽  
P. Stephens ◽  
W. R. Bowen ◽  
D. W. Thomas
Keyword(s):  
Atomic Force Microscopy ◽  
Wound Healing ◽  
Human Fibroblasts ◽  
Three Dimensional ◽  
Positive Influence ◽  
Porous Scaffolds ◽  
Force Microscopy ◽  
Cellular Assays ◽  
Atomic Force

An engineering approach to the development of biomaterials for promotion of wound healing emphasises the importance of a well‒controlled architecture and concentrates on optimisation of morphology and surface chemistry to stimulate guidance of the cells within the wound environment. A series of three‒dimensional porous scaffolds with 80–90% bulk porosity and fully interconnected macropores were prepared from two biodegradable materials – cellulose acetate (CA) and poly (lactic‒co‒glycolic acid) (PLGA) through the phase inversion mechanism of formation. Surface morphology of obtained scaffolds was determined using atomic force microscopy (AFM) in conjunction with optical microscopy. Scanning Electron Microscopy (SEM) was applied to characterise scaffolds bulk morphology. Biocompatibility and biofunctionality of the prepared materials were assessed through a systematic study of cell/material interactions using atomic force microscopy (AFM) methodologies together within vitrocellular assays. Preliminary data with human fibroblasts demonstrated a positive influence of both scaffolds on cellular attachment and growth. The adhesion of cells on both biomaterials were quantified by AFM force measurements in conjunction with a cell probe technique since, for the first time, a fibroblast probe has been successfully developed and optimal conditions of immobilisation of the cells on the AFM cantilever have been experimentally determined.

Development of HA-PLGA Scaffold Encapsulating Intact BMP-2 Using Solid Freeform Fabrication Technology

2011 ◽  
Author(s):  
Jin-Hyung Shim ◽  
Jong Young Kim ◽  
Kyung Shin Kang ◽  
Jung Kyu Park ◽  
Sei Kwang Hahn ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Regeneration ◽  
Porous Scaffold ◽  
Solid Freeform Fabrication ◽  
Three Dimensional ◽  
Porous Scaffolds ◽  
Prolonged Release ◽  
Cellular Activity ◽  
Freeform Fabrication

Tissue engineering is an interdisciplinary field that focuses on restoring and repairing tissues or organs. Cells, scaffolds, and biomolecules are recognized as three main components of tissue engineering. Solid freeform fabrication (SFF) technology is required to fabricate three-dimensional (3D) porous scaffolds to provide a 3D environment for cellular activity. SFF technology is especially advantageous for achieving a fully interconnected, porous scaffold. Bone morphogenic protein-2 (BMP-2), an important biomolecule, is widely used in bone tissue engineering to enhance bone regeneration activity. However, methods for the direct incorporation of intact BMP-2 within 3D scaffolds are rare. In this work, 3D porous scaffolds with poly(lactic-co-glycolic acid) chemically grafted hyaluronic acid (HA-PLGA), in which intact BMP-2 was directly encapsulated, were successfully fabricated using SFF technology. BMP-2 was previously protected by poly(ethylene glycol) (PEG), and the BMP-2/PEG complex was incorporated in HA-PLGA using an organic solvent. The HAPLGA/PEG/BMP-2 mixture was dissolved in chloroform and deposited via a multi-head deposition system (MHDS), one type of SFF technology, to fabricate a scaffold for tissue engineering. An additional air blower system and suction were installed in the MHDS for the solvent-based fabrication method. An in vitro evaluation of BMP-2 release was conducted, and prolonged release of intact BMP-2, for up to 28 days, was confirmed. After confirmation of advanced proliferation of pre osteoblasts, a superior differentiation effect of the HA-PLGA/PEG/BMP-2 scaffold was validated by measuring high expression levels of bone-specific markers, such as alkaline phosphatase (ALP) and osteocalcin (OC). We show that our solvent-based fabrication is a non-toxic method for restoring cellular activity. Moreover, the HAPLGA/PEG/BMP-2 scaffold was effective for bone regeneration.

Microscopic Analysis of Porous Biodegradable Scaffolds for Tissue Engineering

2000 ◽  
Vol 6 (S2) ◽  
pp. 988-989
Author(s):  
F. Buevich ◽  
S. Pulapura ◽  
J. Kohn
Keyword(s):  
Tissue Regeneration ◽  
Combinatorial Library ◽  
Three Dimensional ◽  
Microscopic Analysis ◽  
Porous Scaffolds ◽  
Biodegradable Scaffolds ◽  
Condensation Polymers ◽  
Scaffold Architecture ◽  
Useful Lifetime

Introduction: There is considerable interest in the use of three-dimensional porous scaffolds for tissue regeneration. The presence of an interconnected framework of pores with large surface area facilitates the formation of extracellular matrix and permits cellular ingrowth into implanted structures. For scaffolds to be useful for tissue regeneration, they must maintain good dimensional stability during the lifetime of the implant. While the initial scaffold architecture is often well characterized, a systematic study of the influence of incubation on the scaffold architecture is critical to ensure that the scaffolds retain their interconnected network of pores during their useful lifetime. Herein, we report on the evaluation of the architecture of polyarylate scaffolds and their stability under in vitro conditions using scanning electron microscopy (SEM).The polymers used in this study were selected from a library of degradable polyarylates. This library is the first reported combinatorial library of biodegradable condensation polymers.

Silica Nanoparticles Three Dimensional Assembly: An Integrative Chemistry Approach Toward Designing Opal-Like Silica Foams

2007 ◽  
Vol 1017 ◽  
Author(s):  
Florent CARN ◽  
Renal BACKOV
Keyword(s):  
Liquid Flow ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Film Surface ◽  
Good Control ◽  
Water Volume ◽  
Porous Scaffolds ◽  
Void Space ◽  
Water Volume Fraction ◽  
Liquid Foam

AbstractNovel meso-/macroporous SiO2 monoliths have been reached by applying a nanotectonic pathway within a confined geometry, i.e. a non-static air-liquid foam pattering process. Final scaffolds are a very close transcription of the tailored periodic air-liquid foam template while highly ordered close-packed silica colloids are texturing the as-synthesized foam walls. The interconnected nanoparticles and associated void space between adjacent particles allow generating intrinsic mesopores, thereby defining hierarchically organized porous scaffolds. The good control over both the air-liquid foam's water volume fraction and the bubble size allow a rational tuning of the macropore shape (diameter, Plateau border's width). At the nano-scale, heterogeneous textural character is associated with abrupt variation in the film's topology certainly governed by the complex liquid flow present within the foam film. This flow induces a surfactant concentration gradient that causes a sort of marginal regeneration on the side of the film. According to these observations, the heterogeneous character of the film surface revealed by AFM can be interpreted like a direct expression of the liquid flow within the air-liquid foam's film.

Engineering Three Dimensional Nanotextured Opal-Like Silica Foams

2005 ◽  
Vol 901 ◽  
Author(s):  
Florent Carn ◽  
Pascal Massé ◽  
Serge Ravaine ◽  
Rénal Backov
Keyword(s):  
Volume Fraction ◽  
Three Dimensional ◽  
Good Control ◽  
Water Volume ◽  
Porous Scaffolds ◽  
Void Space ◽  
Cell Structures ◽  
Closed Cell ◽  
Water Volume Fraction ◽  
Liquid Foam

AbstractNovel meso-/macroporous SiO2 monoliths have been reached by applying a nanotectonic pathway within a confined geometry, i.e. a non-static air-liquid foam patterning process. Final scaffolds are a very close transcription of the tailored periodic air-liquid foam template while coalesced silica particles are texturing the as-synthesized foam walls. The interconnected nanoparticles and associated void space between adjacent particles allow generating intrinsic mesopores, thereby defining hierarchically organized porous scaffolds. The good control over both the air-liquid foam’s water volume fraction and the bubble size allow a rational tuning of the macropore shape (diameter, Plateau border’s width). In contrast with previous study, closed-cell structures can be reached, while the opal like scaffold structure is maintained with thermal treatment, avoiding thus strong shrinkage associated to the sintering effect.

scholarly journals Three-Dimensional Printing of Curcumin-Loaded Biodegradable and Flexible Scaffold for Intracranial Therapy of Glioblastoma Multiforme

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 471
Author(s):  
Ruixiu Li ◽  
Yunmei Song ◽  
Paris Fouladian ◽  
Mohammad Arafat ◽  
Rosa Chung ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Glioblastoma Multiforme ◽  
Drug Delivery System ◽  
Delivery System ◽  
Treatment Options ◽  
Three Dimensional ◽  
Great Promise ◽  
Porous Scaffolds ◽  
3D Printed

A novel drug delivery system preventing Glioblastoma multiforme (GBM) recurrence after resection surgery is imperatively required to overcome the mechanical limitation of the current local drug delivery system and to offer personalised treatment options for GBM patients. In this study, 3D printed biodegradable flexible porous scaffolds were developed via Fused Deposition Modelling (FDM) three-dimensional (3D) printing technology for the local delivery of curcumin. The flexible porous scaffolds were 3D printed with various geometries containing 1, 3, 5, and 7% (w/w) of curcumin, respectively, using curcumin-loaded polycaprolactone (PCL) filaments. The scaffolds were characterised by a series of characterisation studies and in vitro studies were also performed including drug release study, scaffold degradation study, and cytotoxicity study. The curcumin-loaded PCL scaffolds displayed versatile spatiotemporal characteristics. The polymeric scaffolds obtained great mechanical flexibility with a low tensile modulus of less than 2 MPa, and 4 to 7-fold ultimate tensile strain, which can avoid the mechanical mismatch problem of commercially available GLIADEL wafer with a further improvement in surgical margin coverage. In vitro release profiles have demonstrated the sustained release patterns of curcumin with adjustable release amounts and durations up to 77 h. MTT study has demonstrated the great cytotoxic effect of curcumin-loaded scaffolds against the U87 human GBM cell line. Therefore, 3D printed curcumin-loaded scaffold has great promise to provide better GBM treatment options with its mechanical flexibility and customisability to match individual needs, preventing post-surgery GBM recurrence and eventually prolonging the life expectancy of GBM patients.

scholarly journals Graphene Coated Scaffold for Bone Tissue Engineering: Physicochemical and Osteogenic Characterizations

2021 ◽  
Author(s):  
Sajad Bahrami ◽  
Nafiseh Baheiraei ◽  
Mostafa Shahrezaee
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Cranial Bone ◽  
Drying Methods ◽  
Porous Scaffolds ◽  
Alizarin Red

Abstract Variety of bone-related diseases and injures and limitations of traditional regeneration methods need to introduce new tissue substitutes. Tissue engineering and regeneration combined with nanomedicine can provide different natural or synthetic and combined scaffolds with bone mimicking properties for implant in the injured area. In this study, we synthesized collagen (Col) and reduced graphene oxide coated collagen (Col-rGO) scaffolds and evaluated their in vitro and in vivo effects on bone tissue repair. Col and Col-rGO scaffolds were synthesized by chemical crosslinking and freeze-drying methods. The surface topography, mechanical and chemical properties of scaffolds were characterized and showed three-dimensional (3D) porous scaffolds and successful coating of rGO on Col. rGO coating enhanced mechanical strength of Col-rGO scaffolds compared with Col scaffolds by 2.8 folds. Furthermore, Col-rGO scaffolds confirmed that graphene addition not only did not any cytotoxic effects but also enhanced human bone marrow-derived mesenchymal stem cells (hBMSCs) viability and proliferation with 3D adherence and expansion. Finally, scaffolds implantation into rabbit cranial bone defect for 12 weeks showed increased bone formation, confirmed by Hematoxylin-Eosin (H&E) and alizarin red staining. Altogether, the study showed that rGO coating improves Col scaffold properties and could be a promising implant for bone injuries.

scholarly journals Characterization and In Vitro Assessment Of Three-Dimensional Extrusion Mg-Sr Codoped SiO2-Complexed Porous Micro-Hydroxyapatite Whisker Scaffolds For Bone Tissue Engineering

2021 ◽  
Author(s):  
Chengyong Li ◽  
Tingting Yan ◽  
Zhenkai Lou ◽  
Zhimin Jiang ◽  
Zhi Shi ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Repair ◽  
Three Dimensional ◽  
Chemical Properties ◽  
Treatment Method ◽  
Porous Scaffolds ◽  
Active Elements

Abstract Background Orthopedics has made great progress with the development of medical treatment; however, large bone defects are still great challenges for orthopedic surgeons. A good bone substitute that can be obtained through bone tissue engineering may be an effective treatment method. Artificial hydroxyapatite is the main inorganic component of bones, but its applications are limited due to its fragility and lack of bone-active elements. Therefore, it is necessary to reduce its fragility and improve its biological activity. Methods In this study, we developed micro-hydroxyapatite whiskers (mHAws), which were doped with the essential trace active elements Mg2+ and Sr2+ through a low-temperature sintering technique, used silica complexes to improve the mechanical properties, and then manufactured the bionic porous scaffolds by extrusion molding and freeze-drying. Results Four types of scaffolds were obtained: mHAw-SiO2, Mg-doped mHAw-SiO2, Sr-doped mHAw-SiO2 and Mg-Sr-codoped mHAw-SiO2. These composite porous scaffolds have been suggested to have a sufficiently porous morphology with appropriate mechanical strength, are noncytotoxic, are able to support cell proliferation and spreading, and, more importantly, can promote the osteogenic differentiation of rBMSCs. Conclusion Therefore, these doped scaffolds not only have physical and chemical properties suitable for bone tissue engineering, but also have higher osteogenic bioactivity, and can be possibly serve as potential bone repair material.

Sign in / Sign up

Export Citation Format

Share Document