scholarly journals Immediate Desensitization in Teeth Affected by Amelogenesis Imperfecta

2016 ◽  
Vol 27 (3) ◽  
pp. 359-362 ◽  
Author(s):  
Rudá França Moreira ◽  
Rossana Gomes Figueiredo ◽  
Henrique Eduardo Oliveira ◽  
Ana Christina Lamosa da Fonseca ◽  
Mauro Sayão de Miranda

Abstract The aim of this paper was to describe a clinical case of immediate dental desensitization using a self-etch adhesive system in an adolescent patient diagnosed with amelogenesis imperfecta (AI). AI was associated with severe tooth sensitivity, treated by the application of a universal adhesive system for desensitization of the teeth affected by AI. Reduction of tooth sensitivity was assessed using a visual analog scale during all reevaluations. The technique was effective for reducing tooth sensitivity. It was concluded that the adhesive system for tooth desensitization had an immediate effect and maintained its effectiveness during a 12-month follow-up period.

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Rie Ishikawa ◽  
Masako Iseki ◽  
Rie Koga ◽  
Eiichi Inada

Postherpetic itch (PHI), or herpes zoster itch, is an intractable and poorly understood disease. We targeted 94 herpes zoster patients to investigate their pain and itch intensities at three separate stages of the condition (acute, subacute, and chronic). We used painDETECT questionnaire (PDQ) scores to investigate the correlation between PHI and neuropathic pain. Seventy-six patients were able to complete follow-up surveys. The prevalence of PHI was 47/76 (62%), 28/76 (37%), and 34/76 (45%) at the acute, subacute, and chronic stages, respectively. PHI manifestation times and patterns varied. We investigated the relationship of PHI with neuropathic pain using the visual analog scale (VAS), which is a measure of pain intensity, and the PDQ, which is a questionnaire used to evaluate the elements of neuropathic pain. The VAS and PDQ scores did not differ significantly between PHI-positive and PHI-negative patients. A large neuropathic component was not found for herpes zoster itch, suggesting that neuropathic pain treatments may not able to adequately control the itch. Accordingly, we suggest that a more PHI-focused therapy is required to address this condition.


Neurosurgery ◽  
2010 ◽  
Vol 66 (5) ◽  
pp. 986-990 ◽  
Author(s):  
Dirk De Ridder ◽  
Sven Vanneste ◽  
Mark Plazier ◽  
Elsa van der Loo ◽  
Tomas Menovsky

Abstract INTRODUCTION Spinal cord stimulation is commonly used for neuropathic pain modulation. The major side effect is the onset of paresthesia. The authors describe a new stimulation design that suppresses pain as well as, or even better than, the currently used stimulation, but without creating paresthesia. METHODS A spinal cord electrode (Lamitrode) for neuropathic pain was implanted in 12 patients via laminectomy: 4 at the C2 level and 7 at the T8–T9 level for cervicobrachialgia and lumboischialgia, respectively (1 at T11 at another center). During external stimulation, the patients received the classic tonic stimulation (40 or 50 Hz) and the new burst stimulation (40-Hz burst with 5 spikes at 500 Hz per burst). RESULTS Pain scores were measured using a visual analog scale and the McGill Short Form preoperatively and during tonic and burst stimulation. Paresthesia was scored as present or not present. Burst stimulation was significantly better for pain suppression, by both the visual analog scale score and the McGill Short Form score. Paresthesia was present in 92% of patients during tonic stimulation, and in only 17% during burst stimulation. Average follow-up was 20.5 months. CONCLUSION The authors present a new method of spinal cord stimulation using bursts that suppress neuropathic pain without the mandatory paresthesia. Pain suppression seems as good as or potentially better than that achieved with the currently used stimulation. Average follow-up after nearly 2 years (20.5 months) suggests that this stimulation design is stable.


2018 ◽  
Vol 46 (14) ◽  
pp. 3437-3445 ◽  
Author(s):  
Itay Perets ◽  
Danil Rybalko ◽  
Brian H. Mu ◽  
David R. Maldonado ◽  
Gary Edwards ◽  
...  

Background: Revision hip arthroscopy is increasingly common and often addresses acetabular labrum pathology. There is a lack of consensus on indications or outcomes of revision labral repair versus reconstruction. Purpose: To report clinical outcomes of labral reconstruction during revision hip arthroscopy at minimum 2-year follow-up as compared with pair-matched labral repair during revision hip arthroscopy (control group) and to suggest a decision-making algorithm for labral treatment in revision hip arthroscopy. Study Design: Cohort study; Level of evidence, 3. Methods: Patients who underwent revision hip arthroscopy with labral reconstruction were matched 1:2 with patients who underwent revision arthroscopic labral repair. Patients were matched according to age, sex, and body mass index. Outcome scores, including the modified Harris Hip Score (mHHS), Non-Arthritic Hip Score, Hip Outcome Score–Sport-Specific Subscale, and a visual analog scale for pain, were collected preoperatively and at minimum 2-year follow-up. At latest follow-up, patient satisfaction on a 0-10 scale and the abbreviated International Hip Outcome Tool (iHOT-12) were collected. Complications, subsequent arthroscopies, and conversion to total hip arthroplasty were collected as well. Results: A total of 15 revision labral reconstructions were pair matched to 30 revision labral repairs. The reconstructions had fewer isolated Seldes type I detachments ( P = .008) and lower postoperative lateral center-edge angle, but there were otherwise no significant differences in demographics, radiographics, intraoperative findings, or procedures. Both groups demonstrated significant improvements in all outcomes and visual analog scale at minimum 2-year follow-up. The revision repairs trended toward better preoperative scores: mHHS (mean ± SD: 59.3 ± 16.5 vs 54.2 ± 16.0), Non-Arthritic Hip Score (61.0 ± 16.7 vs 51.2 ± 17.6), Hip Outcome Score–Sport-Specific Subscale (39.6 ± 25.1 vs 30.5 ± 22.1), and visual analog scale (5.8 ± 1.8 vs 6.2 ± 2.2). At follow-up, the revision repair group had significantly higher mHHS (84.1 ± 14.8 vs 72.0 ± 18.3, P = .043) and iHOT-12 (72.2 ± 23.3 vs 49.0 ± 27.6, P = .023) scores than the reconstruction group. The magnitudes of pre- to postoperative improvement between the groups were comparable. The groups also had comparable rates of complications: 1 case of numbness in each group ( P > .999), subsequent arthroscopies (repair: n = 2, 6.5%; revision: n = 3, 20%; P = .150), and conversion to total hip arthroplasty (1 patient in each group, P > .999). Conclusion: Labral reconstruction safely and effectively treats irreparable labra in revision hip arthroscopy. However, labral repair is another treatment option for reparable labra, yielding similar magnitude of improvement. A proposed algorithm may assist in surgical decision making to achieve optimal outcomes based on the condition and history of each patient’s acetabular labrum.


Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 461 ◽  
Author(s):  
Joana Vasconcelos e Cruz ◽  
Mário Polido ◽  
José Brito ◽  
Luisa L. Gonçalves

Due to their polymerization characteristics, hyper-branched dendrimers have lately shown to be promising candidates for use in dental materials. In this study, a new dental adhesive system was prepared, using a dendrimer derived from 2-isocyanatoethyl methacrylate (G-IEMA), and its adhesive properties were investigated. The exposed dentin was treated with four universal adhesives (UAs): SBU (Scotchbond Universal™), FUT (Futurabond M+™), AE1 (experimental adhesive with Bis-GMA) and AE2 (experimental adhesive with G-IEMA), using Etch & Rinse (ER) or Self Etch (SE) protocols. Composite build-ups were prepared and stored for 24 h at 37 °C in distilled water. Composite/dentin beams were prepared with cross-sectional areas of 1 ± 0.3 mm2 and µTBS (Micro-tensile bond strength) test was performed at 0.5 mm/min. Failures modes were evaluated by stereomicroscopy, and bonding interfaces were observed by scanning electron microscopy (SEM). Statistical analysis of µTBS data was performed using General Linear (GLM) and Linear Mixed Models (LMM). The effect of adhesive type on µTBS was significant (p = 0.010), with AE1 presenting significantly higher µTBS than SBU (p = 0.019). No other differences between adhesives were observed. ER showed significantly better results than SE (p = 0.019), and no significant interactions between the adhesives and protocols were determined. Results obtained so far pinpoint the emergence of a new paradigm in the dental materials field, as G-IEMA can be used successfully as an alternative to Bis-GMA.


2019 ◽  
Vol 4 (4) ◽  
pp. 2473011419S0036
Author(s):  
Edward M Rooney ◽  
Fred T Finney ◽  
Paul Talusan ◽  
James R Holmes ◽  
David Walton

Category: Ankle, Ankle Arthritis, Trauma Introduction/Purpose: It is important to understand which isolated fibular fractures require surgical intervention. Several different radiographic guidelines have been used to interpret and predict stability of the injured ankle. Holmes et al previously described a novel algorithm used to assess stability and the ability to treat the stable injuries non-operatively. The one year results demonstrated favorable outcomes of these non-operative patients, however there is a question about the durability of these results and whether these patients developed post-traumatic degenerative changes over mid to long term follow up. Methods: An observational study based on a previous cohort of 51 patients studied from 2010 to 2013 with isolated Weber B ankle fractures was performed. These were defined as stable at the time of injury when the medial clear space (MCS) was less than 7 mm on the initial gravity stress radiographs along with a normal mortise relationship on weight bearing radiographs. 27 patients that were treated non-surgically, were brought back for a mid-term follow up with a mean of 6.8 years. American Orthopaedic Foot & Ankle Society (AOFAS) Hindfoot scores, Olerud-Molander Ankle (OMA) Score, and visual analog scale (VAS) pain score were collected in accordance with the prior study. Patient Reported Outcome Measurement Information System (PROMIS) scores were also collected including lower extremity, physical function, depression, and pain interference. Standing bilateral ankle radiographs were obtained, and assessed for MCS widening, and ankle arthritis using the Kellgren-Lawrence grading scale. Results: Average functional score results were (in comparison to 1-year outcomes): AOFAS Hindfoot, 95.7 (93.2); OMA Score, 95.2 (91.0); and visual analog scale pain score, 0.24 (0.57). Using a Wilcox Signed Ranks Test, there was a statistically significant increase in 5-year AOFAS Hindfoot scores as compared to 1-year scores in those same patients (p=0.005) There was no evidence of significant post-traumatic osteoarthritis based on the Kellgren-Lawrence grading scale. Conclusion: The previously described, novel at the time, algorithm for assessing stability of isolated Weber B ankle fractures and nonsurgical treatment with protected weight bearing has shown to produce excellent results for mid-term follow up with an average of 6.8 years. Additionally, these patients are not at increased risk for rapid progression of post-traumatic osteoarthritis. This further supports initial weight bearing radiographs as a reasonable assessment of ankle stability and validates the aforementioned algorithm as a safe and cost-effective functional treatment regimen.


2001 ◽  
Vol 25 (1) ◽  
pp. 29-34 ◽  
Author(s):  
M. Ashkenazi ◽  
H. Sarnat

Microabrasion with 18% HCl and pumice to remove enamel dysmineralization and improve esthetics is an accepted and effective treatment. This technique can probably be extended even to generalized defects resembling hypomaturation amelogenesis imperfecta that appear on all erupted teeth. Five children aged 9 to 11 with two types of enamel-hypomaturation probably due to developmental defects were treated successfully by microabrasion, with marked improvement of the discoloration. The patients were followed for up to four years. During this period, no tooth-sensitivity or staining was noted. The teeth looked healthier and shinier.


2010 ◽  
Vol 13 (4) ◽  
pp. 424-434 ◽  
Author(s):  
Vincent C. Traynelis

Object Certain cervical spinal conditions require decompression and reconstruction of the entire subaxial cervical spine. There are limited data concerning the clinical details and outcomes of patients treated in this manner. The object of this study was to describe the specific technique employed to perform a total subaxial reconstruction and review the postoperative outcomes following surgery. Methods The author performed a review of data prospectively collected in 27 consecutive patients undergoing complete anterior decompression and reconstruction of the anterior cervical spine and followed by posterior instrumented arthrodesis with or without decompression. Results There were 16 men and 11 women whose mean age was 59 years (range 35–86 years). The minimum follow-up was 12 months and the mean follow-up period for all patients was 26 months. One patient underwent C2–7 surgery, and in all others the procedure crossed the cervicothoracic junction. Following surgery patients remained intubated for an average of 3.3 days (range 1–22 days). The mean hospital length of stay was 11 days (range 3–45 days). One patient died 6 weeks following an uneventful surgery. Pneumonia developed in 5 patients, 1 patient experienced a minor pulmonary embolism, and 2 patients had posterior wound infections. No patient was neurologically worse following surgery. A single patient presented with a C-8 radiculopathy 6 weeks after surgery. At final follow-up no patient complained of dysphagia when specifically questioned about this potential problem. In all patients solid fusions developed at each treated levels. Preoperatively the mean sagittal Cobb angle was 15.4° (kyphosis) and the postoperative mean angle was −10.9° (lordosis) representing a total average correction of over 25° (p < 0.0001). The mean preoperative Neck Disability Index was 27.6; this score decreased to 15.5 (p = 0.0008) postoperatively. The mean pre- and postoperative visual analog scale neck pain scores were 6.0 and 2.1, respectively (p = 0.0004), and mean visual analog scale arm pain scores decreased by 3.7 following surgery (p = 0.001). Based on Odom criteria, the author found that 8 patients had an excellent outcome and 14 patients a good outcome. There were 4 patients in whom the outcome was judged to be fair and the single death was recorded as a poor outcome. The mean preoperative Nurick score was 2.68. Postoperatively the group improved to an average score of 1.5; the difference between the 2 was statistically significant (p = 0.002). Conclusions Segmental anterior decompression and reconstruction of the entire subaxial cervical spine, combined with an instrumented posterolateral fusion, can be performed with acceptable morbidity and is of significant benefit in selected patients.


Author(s):  
Katrin Bekes ◽  
Stefanie Amend ◽  
Julia Priller ◽  
Claudia Zamek ◽  
Tanja Stamm ◽  
...  

Abstract Objectives The aim of this study was to compare the efficacy in reducing hypersensitivity in molar incisor hypomineralization (MIH)-affected molars immediately and over 12 weeks after sealing using two different materials (composite and glass ionomer). Furthermore, the retention rates of both materials were analyzed. Methods Thirty-nine children with two MIH-affected molars showing hypersensitivity and non-occlusal breakdowns were included. Hypersensitivity was assessed with an evaporative (air) stimulus. Both teeth were sealed by two calibrated operators using a split-mouth design with either Clinpro Sealant in combination with Scotchbond Universal (C) or Ketac Universal (K), respectively. Clinical pain assessments (Schiff Score Air Sensitivity Scale [SCASS], Visual Analog Scale [VAS]) were made at baseline (“pre”), immediately after treatment (“post”), and after 1, 4, 8, and 12 weeks. Paired t tests were calculated in each group between baseline and all other time points. Results Thirty-eight children with 76 molars completed all stages of the study. Regardless of the material used, the application of the sealant decreased hypersensitivity significantly immediately as well as throughout the 12-week recalls (all p values < 0.001). We found no statistically significant difference among both materials chosen in any of the time points evaluated. Furthermore, retention of both materials was comparable in both groups. Conclusions Both sealant materials were able to reduce hypersensitivity successfully immediately and throughout the 12-week follow-up. Furthermore, their performance was similar in terms of retention. Clinical relevance Hypersensitivity can be a major complaint in patients with MIH. This is the first study evaluating hypersensitivity relief of MIH-affected molars using two sealing techniques.


2021 ◽  
Author(s):  
Jian wu ◽  
Yuehong Guan

Abstract Objective: To compare clinical outcomes of hydraulic perfusion pump and traditional water jet irrigation in percutaneous endoscopic lumbar discectomy by a prospective randomized controlled study. Methods: From January 2016 to December 2018, 72 patients with lumbar disc herniation and failed conservative treatment were enrolled in this study. According to the odd number of the last digit of the hospitalization number, the patients were randomly divided into a hydraulic perfusion pump group and a traditional water jet irrigation group, 36 cases in each group. There were no significant differences in gender, age, prominent segment, clinical classification, preoperative pain visual analog scale (VAS), and Japanese Orthopedic Association (JOA) scores between two groups (P>0.05). The same surgeon performed all operations. These operations were performed by hydraulic perfusion pump flushing and traditional water flushing assisted surgery. The patients were followed up for 12 to 24 months (mean 15.7 months). The operation time, blood loss, hospital time, visual analog scale (VAS) for follow-up pain after one day and two weeks, and the last follow-up JOA scores. The type and incidence of postoperative complications were compared between two groups.Results: Compared with the traditional water flushing group, the operation time of the hydraulic perfusion pump group was short [(65.5±21.3) min vs. (74.8±19.9) min, t=9.465, P=0.003]. Blood loss was less [(21.2±12.9) ml vs. (27.4±14.1) ml, t=8.331, P=0.012]; there was no statistical difference in hospitalization time. The pain visual analog scale (VAS) and the last follow-up JOA scores in one day, two weeks were better than preoperative, but there was no statistical difference between the groups (P>0.05). In the traditional water flushing group, the symptoms of increased intracranial pressure like headache and neck pain occurred during the operation, which was forced to shorten the operation time in 5 cases, nerve root adventitia injury in 4 cases, and postoperative recurrence in 4 cases. In the hydraulic perfusion pump group, no patient had the symptoms of increased intracranial pressure like headache and neck pain, and nerve root adventitia injury in 1 case and 2 cases of postoperative recurrence. The incidence of complications in the hydraulic perfusion group was lower than that in the traditional water flow group. Conclusion:Hydraulic perfusion pump and traditional water-flow irrigation assisted percutaneous endoscopic lumbar disc herniation can achieve satisfactory clinical results. However, the former has short operation time, clear vision in operation, less bleeding, and less in-operation and postoperative complications.


2021 ◽  
Vol 15 (2) ◽  
pp. 82-86
Author(s):  
Mahmoud Bahari ◽  
Siavash Savadi Oskoee ◽  
Mohammad Esmaeel Ebrahimi Chaharom ◽  
Nasim Molayi

Background. Contamination of dentin surface is one of the common problems in restorative dentistry. The aim was to investigate the effects of different surface contaminators on the dentin shear bond strength (SBS) of universal adhesive system (UAS) applied in etch-and-rinse (ER) and self-etch (SE) strategies. Methods. One hundred forty-four maxillary anterior sound human teeth were divided into six groups based on the types of surface contaminators: no surface contaminator (control) and experimental groups contaminated with blood, saliva, aluminium chloride (ALC), ferric sulphate (FS), and caries disclosing agent (CDA). Then, each group was further subdivided into two, based on the application strategy of UAS (ER and SE). After applying the adhesive according to the manufacturer’s instructions, and bonding cylindrical composite samples, the SBS was measured. The data were analysed using two-way ANOVA, Tukey’s HSD test and t test (P<0.05). Results. The SBS in all contaminated groups, except for CDA, was significantly lower in both ER and SE strategies compared to control group (P<0.05). A comparison between the application strategies revealed that ER and SE were only significantly different in the FS contaminated group (P<0.05). Conclusion. All tested contaminators, except CDA, significantly decreased SBS of UAS in both ER and SE strategies.


Sign in / Sign up

Export Citation Format

Share Document