scholarly journals Performance of an agricultural engine using mineral diesel and ethanol fuels

2017 ◽  
Vol 47 (3) ◽  
Author(s):  
Marcelo Silveira de Farias ◽  
◽  
José Fernando Schlosser ◽  
Alexandre Russini ◽  
Ulisses Giacomini Frantz ◽  
...  
Keyword(s):  
Alternative Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Diesel Oil ◽  
Injection System ◽  
Performance Parameters ◽  
Global Demand ◽  
Speed Range ◽  
Environmental Requirements ◽  
Agricultural Use

ABSTRACT: The global demand for alternatives for mineral diesel oil is growing due to the need for satisfying sustainability and environmental requirements, forcing industries and research institutions to develop new alternative fuels. The objective of this study was to evaluate the performance parameters of an agricultural engine using two different fuels: mineral diesel oil and ethanol. The experiment was conducted on a dynamometric stand using two engines for agricultural use but with a modified fuel injection system, suitable for both diesel and ethanol, in the speed range 1200-2300rpm. The performance of the engines was analyzed considering the power take-off from the tractors for each fuel, as established in the standard NBR ISO 1585. The data obtained showed that at the working speed that provides 540rpm at the power take-off, the engine performance changed when powered by ethanol, with a reduction in the maximum power and increased specific fuel consumption.

scholarly journals Analysis of Selected Performance Parameters of Engine Powered with a Mixture of Biocomponents and Diesel Oil

2020 ◽  
Vol 50 (3) ◽  
pp. 175-192
Author(s):  
Marietta Markiewicz ◽  
Łukasz Muślewski
Keyword(s):  
High Performance ◽  
Fuel Injection ◽  
Methyl Esters ◽  
Engine Performance ◽  
Diesel Oil ◽  
Injection System ◽  
Performance Parameters ◽  
Performance Additives ◽  
Desirable Effect ◽  
Engine Power

AbstractThe most desirable effect of motorization development is providing a drive unit with high performance parameters and reduce the environmental impact. This study presents the results of tests of a self-ignition engine power output and torque. The tested engine was powered with diesel oil and a mixture of fatty acid methyl esters in the proportions of 10%, 30% and 50% with performance additives, for standard settings of the fuel injection system. The tests were carried out on a chassis dynamometer for full load of the engine. The vehicle was placed on the dynamometer rollers and attached to the base by means of belts. The analysis shows that application of the mixture decreases the engine performance parameters to such a degree that the engine is not put at any risk of damage.

Multiple fuel injection strategy for premixed charge compression ignition combustion engine using biodiesel blends

2022 ◽  
pp. 146808742110667
Author(s):  
Akhilendra Pratap Singh ◽  
Ashutosh Jena ◽  
Avinash Kumar Agarwal
Keyword(s):  
Alternative Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Pilot Injection ◽  
Compression Ignition ◽  
Combustion Control ◽  
Combustion Mode ◽  
Biodiesel Blends ◽  
Injection Parameters ◽  
Study Results

In the last decade, advanced combustion techniques of the low-temperature combustion (LTC) family have attracted researchers because of their excellent emission characteristics; however, combustion control remains the main issue for the LTC modes. The objective of this study was to explore premixed charge compression ignition (PCCI) combustion mode using a double pilot injection (DPI; pilot-pilot-main) strategy to achieve superior combustion control and to tackle the soot-oxides of nitrogen (NOx) trade-off. Experiments were carried out in a single-cylinder research engine fueled with 20% v/v biodiesel blended with mineral diesel (B20) and 40% v/v biodiesel blended with mineral diesel (B40) vis-à-vis baseline mineral diesel. Engine speed and rate of fuel-mass injected were maintained constant at 1500 rpm and 0.6 kg/h mineral diesel equivalent, respectively. Pilot injection timings (at 45° and 35° before top dead center (bTDC)) and fuel quantities were fixed, while three fuel injection pressures (FIPs) and four different start of the main injection (SoMI) timings were investigated in this study. Results showed that multiple pilot injections resulted in a stable PCCI combustion mode, making it suitable for higher engine loads. For all test fuels, advancing SoMI timings led to relatively lesser knocking; however, engine performance characteristics degraded at advanced SoMI timings. B40 exhibited relatively superior engine performance among different test fuels at lower FIP; however, the difference in engine performance was insignificant at higher FIPs. Fuel injection parameters showed a significant effect on emissions, especially on the NOx and particulates. Advancing SoMI timing resulted in 20%–50% lower particulates emissions with a slight NOx increase; however, the differences in emissions at different SoMI timings reduced at higher FIPs. Somewhat higher particulates from biodiesel blends were a critical observation of this study, which was more dominant at advanced SoMI timings. Qualitative correlation between NOx-total particulate mass (TPM) was another critical analysis, which exhibited the relative importance of different fuel injection parameters for other alternative fuels. Overall, B20 at 700 bar FIP and 20° SoMI timing emerged as the most promising proposition with some penalty in CO emission.

Automated Engine Calibration Optimization Using Online Extremum Seeking

2018 ◽  
Author(s):  
Ripudaman Singh ◽  
Andrew Mansfield ◽  
Margaret Wooldridge
Keyword(s):  
Control Parameter ◽  
Gasoline Engine ◽  
Fuel Injection ◽  
Engine Performance ◽  
Extremum Seeking ◽  
Injection System ◽  
Test Time ◽  
Injection Timing ◽  
Promising Alternative ◽  
Non Linear System

Emissions compliance during engine start-up conditions is a major obstacle for current automotive manufacturers across global markets. The challenges to meeting emissions targets are both due to increasingly stringent regulations and the difficulty in developing control strategies for a high degree-of-freedom and highly non-linear system. Online extremum-seeking (ES) methods offer a promising alternative to traditional optimization based on design-of-experiment based automotive calibration. With extremum-seeking methods, results from all prior experiments are used to intelligently and efficiently generate the next iteration of the control parameter(s). In this work, the applicability of the online extremum-seeking method is explored to optimize five performance variables (injection timing for two injection events, the injection fuel mass divided between the first and second injection events, air-fuel equivalence ratio and exhaust cam timing) to minimize brake specific fuel consumption while imposing different constraints on NOx emissions. The experiments were conducted using a production turbocharged four-cylinder gasoline engine with an advanced fuel injection system. The results show the utility of the ES strategy to quickly identify optimal control parameter combinations and the emissions and engine performance improvements during the calibration process. The results also demonstrate the dramatic benefit of the ES calibration strategy in terms of test time required.

scholarly journals Experimental Methodology and Facility for the J69-Engine Performance and Emissions Evaluation Using Jet A1 and Biodiesel Blends

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4530 ◽  
Author(s):  
Gabriel Talero ◽  
Camilo Bayona-Roa ◽  
Giovanny Muñoz ◽  
Miguel Galindo ◽  
Vladimir Silva ◽  
...  
Keyword(s):  
Fossil Fuels ◽  
Fuel Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Experimental Tests ◽  
Experimental Methodology ◽  
Injection System ◽  
Small Scale ◽  
Gas Temperature ◽  
Maximum Increase

Aeronautic transport is a leading energy consumer that strongly contributes to greenhouse gas emissions due to a significant dependency on fossil fuels. Biodiesel, a substitution of conventional fuels, is considered as an alternative fuel for aircrafts and power generation turbine engines. Unfortunately, experimentation has been mostly limited to small scale turbines, and technical challenges remain open regarding operational safety. The current study presents the facility, the instrumentation, and the measured results of experimental tests in a 640 kW full-scale J69-T-25A turbojet engine, operating with blends of Jet A1 and oil palm biodiesel with volume contents from 0% to 10% at different load regimes. Findings are related to the fuel injection system, the engine thrust, and the emissions. The thrust force and the exhaust gas temperature do not expose a significant variation in all the operation regimes with the utilization of up to 10% volume content of biodiesel. A maximum increase of 36% in fuel consumption and 11% in injection pressure are observed at idle operation between B0 and B10. A reduction of the CO and HC emissions is also registered with a maximum variation at the cruise regime (80% Revolutions Per Minute—RPM).

Progress on the Investigation of Coal-Water-Slurry Fuel Combustion in a Medium-Speed Diesel Engine: Part 3—Accumulator Injector Performance

1989 ◽  
Vol 111 (3) ◽  
pp. 516-520 ◽  
Author(s):  
B. D. Hsu ◽  
G. L. Leonard ◽  
R. N. Johnson
Keyword(s):  
Diesel Engine ◽  
Engine Performance ◽  
Diesel Oil ◽  
Fuel Combustion ◽  
Injection System ◽  
Water Slurry ◽  
Medium Speed ◽  
Engine Part ◽  
Coal Water Slurry

Coal-water-slurry (CWS) engine tests designed to evaluate a new accumulator-based injection system are described in this paper. The new injection system was found to improve CWS burnout considerably at both full and part engine loads. The peak cylinder firing pressure when operating with CWS was no higher than when operating with diesel oil. These data demonstrate the improved engine performance that can be achieved with the accumulator-based injection system.

Torsional Vibration Active Control of a Diesel Engine Based on Adjustment of the Fuel Injection Vector

2012 ◽  
Author(s):  
Ying Huang ◽  
Yongguang Yang ◽  
Fujun Zhang ◽  
Zhenfeng Zhao
Keyword(s):  
Diesel Engine ◽  
Active Control ◽  
Torsional Vibration ◽  
Fuel Injection ◽  
Vibration Suppression ◽  
Engine Performance ◽  
Frequency Characteristics ◽  
Injection System ◽  
Control Individual ◽  
Engine Model

The torsional vibration of a crankshaft greatly affects engine performance, and the control and suppression of such vibration have thus always been a focus of engine research. The introduction of an electronic fuel-injection system for the diesel engine has made it possible to control individual cylinders, thus providing a new way to actively control the torsional vibration of a diesel engine. A V8 diesel engine model for co-simulation between crankshaft dynamics and engine performance was established with GT-SUIT software, and the model was verified by experiment data. The active control of crankshaft torsional vibration of a diesel engine by adjusting the fuel injection vector was simulated. First, the amplitude–frequency and phase–frequency characteristics of the excitation torque under different fuel-injection-vector conditions were analyzed. On the basis of the frequency characteristics, different active vibration-suppression schemes were studied, and the crankshaft vibration suppression effects were compared. The simulation results show that adjusting the fuel injection vector is an effective approach for controlling the torsional vibration of an engine crankshaft.

Sign in / Sign up

Export Citation Format

Share Document