scholarly journals Biofilm formation by Vibrio parahaemolyticus on different surfaces and its resistance to sodium hypochlorite

2018 ◽  
Vol 48 (12) ◽  
Author(s):  
Janaina Viana da Rosa ◽  
Natália Volpato da Conceição ◽  
Rita de Cássia dos Santos da Conceição ◽  
Cláudio Dias Timm

ABSTRACT: Vibrio parahaemolyticus is an important pathogen for both fish industry and consumers. It forms biofilm which makes it difficult to eliminate this microorganism using sanitizers. This study aimed to assess biofilm formation on different surfaces and effect of biofilm on resistance to sanitizers. Eight isolates of biofilm-forming V. parahaemolyticus were tested for the ability to form biofilms on a number of surfaces including high density polyethylene, stainless steel, glass, exoskeleton of Farfantepenaeus paulensis (Pink Shrimp), and operculum of Micropogonias furnieri (Whitemouth Croaker). Efficiency of sanitizer sodium hypochlorite against the bacteria was evaluated in the biofilms formed on the surface of the materials used; out the eight strains analyzed four formed biofilm on different surfaces. The present study shows that there are variations between surfaces in terms of biofilm formation, with more than one bacterial strain being able to form biofilm on the surface of the operculum of M. furnieri and on high density polyethylene as well. One isolate formed biofilm on glass, and one isolate formed biofilm on stainless steel. Sanitizers reduced biofilm formation on all surfaces. Based on our findings, we concluded that V. parahaemolyticus isolates have different ability to form biofilm on different surfaces. No isolates formed biofilm on shrimp shells. Results of this study also showed that sodium hypochlorite eat a concentration of 20 parts per million (20ppm) of Cl2, albeit not able to eliminate bacteria reported in biofilms, is still capable of reducing bacterial populations.

2018 ◽  
Vol 46 (1) ◽  
pp. 6 ◽  
Author(s):  
Anelise Bravo Friedriczewski ◽  
Eliezer Ávila Gandra ◽  
Rita De Cássia dos Santos da Conceição ◽  
Natacha Deboni Cereser ◽  
Lauren Machado Moreira ◽  
...  

Background: The buffalo milk mozzarella cheese is a new product in the market, with high consumer acceptance and excellent prospects for trade. The cheese is rich in nutrients, which favors the proliferation of microorganisms that can cause food-borne diseases in the consumer. Staphylococcus aureus can cause gastro-enteritis in humans by the production of enterotoxins in food. One problem that may hinder the elimination of undesirable microorganisms in the food industry is the formation of biofilms. The objective of this study was to determine the effect of biofilm formation by Staphylococcus aureus isolated from buffalo mozzarella cheese on sensitivity to sanitizers.Materials, Methods & Results: Fifty samples of buffalo mozzarella cheese were analyzed to investigate the presence of S. aureus. The isolates were obtained through microbiological analysis and identified by PCR. The similarity of the strains was compared through rep-PCR. The distinct strains were tested for biofilm formation in microtiter plates. Soy Tripticase Broth (TSB) was placed in each well of the microtiter plate and overnight cultures of each strain was added. Wells without bacterial culture were used as controls. A villous cap was then placed on the plate and incubated for 48 h at 37°C. During incubation, the biofilms formed on the surface of the villi of the caps. For quantification of biofilm formation, material that remained attached to the cap was stained with crystal violet, the stained biofilm was extracted and the OD570 of each well was measured. Each strain was classified as non-biofilm forming, weak forming, moderately formed or formative strong. Strong forming and non-biofilm forming strains were tested on high density polyethylene, stainless steel and glass surfaces. Plates of 4 cm² of the different materials were placed in TSB where the culture of each isolate was inoculated separately. At each 48 h incubation the plates were washed to remove unbound cells and re-inserted into TSB without the inoculum. After five replicates of the procedure, sterile swabs were passed over the entire surface of each plate for counting in Baird-Parker agar. They were also tested for sensitivity to sodium hypochlorite and iodine after biofilm formation. The biofilm plates were immersed in flasks containing sanitizers, where they remained for 10 min. At the established contact time, the plates were immersed in neutralizing solution for 30 s. After washing with PBS, a sterile swab was passed on the surface of each plate and counts on Baird-Parker agar were performed. The bands profiles obtained on rep-PCR were identical when compared to isolates from the same sample, indicating that each sample was contaminated with only one S. aureus strain. From the twenty S. aureus strain identified, two isolates were classified as strong biofilm formers, seven as moderate formers, ten weak formers and one as non-biofilm builder. The two strong forming strains produced biofilm on the three surfaces tested. The application of sodium hypochlorite and iodine sanitizers promoted a reduction of approximately 2 log bacterial populations on all surfaces of both the biofilm and non-forming strains.Discussion: Most strains of S. aureus isolated from buffalo milk mozzarella cheese have the ability to form biofilm on the surfaces of equipment and utensils that have stainless steel, glass or high density polyethylene components. Although biofilm forming strains are no longer resistant to sanitizers sodium hypochlorite and iodine than non-forming sanitizers, they reach higher concentrations in the biofilm, resulting in larger bacterial populations remaining after application of the sanitizers. These results support the recommendation that the good hygienic practices adopted by industries processing buffalo milk mozzarella cheese should include specific measures to control the Staphylococcus aureus contamination.


2015 ◽  
Vol 61 (8) ◽  
pp. 539-544 ◽  
Author(s):  
Chao Gong ◽  
Xiuping Jiang

Hydrogen sulfide producing bacteria (SPB) in raw animal by-products are likely to grow and form biofilms in the rendering processing environments, resulting in the release of harmful hydrogen sulfide (H2S) gas. The objective of this study was to reduce SPB biofilms formed on different surfaces typically found in rendering plants by applying a bacteriophage cocktail. Using a 96-well microplate method, we determined that 3 SPB strains of Citrobacter freundii and Hafnia alvei are strong biofilm formers. Application of 9 bacteriophages (107 PFU/mL) from families of Siphoviridae and Myoviridae resulted in a 33%–70% reduction of biofilm formation by each SPB strain. On stainless steel and plastic templates, phage treatment (108 PFU/mL) reduced the attached cells of a mixed SPB culture (no biofilm) by 2.3 and 2.7 log CFU/cm2 within 6 h at 30 °C, respectively, as compared with 2 and 1.5 log CFU/cm2 reductions of SPB biofilms within 6 h at 30 °C. Phage treatment was also applied to indigenous SPB biofilms formed on the environmental surface, stainless steel, high-density polyethylene plastic, and rubber templates in a rendering plant. With phage treatment (109 PFU/mL), SPB biofilms were reduced by 0.7–1.4, 0.3–0.6, and 0.2–0.6 log CFU/cm2 in spring, summer, and fall trials, respectively. Our study demonstrated that bacteriophages could effectively reduce the selected SPB strains either attached to or in formed biofilms on various surfaces and could to some extent reduce the indigenous SPB biofilms on the surfaces in the rendering environment.


2007 ◽  
Vol 70 (6) ◽  
pp. 1423-1428 ◽  
Author(s):  
ANDRÉS RODRÍGUEZ ◽  
WESLEY R. AUTIO ◽  
LYNNE A. McLANDSBOROUGH

The influence of inoculation level, material hydration, and stainless steel surface roughness on the transfer of Listeria monocytogenes from inoculated bologna to processing surfaces (stainless steel and polyethylene) was assessed. Slices of bologna (14 g) were inoculated with Listeria at different levels, from 105 to 109 CFU/cm2. Transfer experiments were done at a constant contact time (30 s) and pressure (45 kPa) with a universal testing machine. After transfer, cells that had been transferred to sterile stainless steel and polyethylene were removed and counted, and the efficiency of transfer (EOT) was calculated. As the inoculation level increased from 105 to 109 CFU/cm2, the absolute level of transfer increased in a similar fashion. By calculating EOTs, the data were normalized, and the initial inoculation level had no effect on the transfer (P > 0.05). The influence of hydration level on stainless steel, high-density polyethylene, and material type was investigated, and the EOTs ranged from 0.1 to 1 under all the conditions tested. Our results show that transfers to wetted processing surfaces (mean EOT = 0.43) were no different from dried processing surfaces (mean EOT = 0.35) (P > 0.05). Material type was shown to be a significant factor, with greater numbers of Listeria transferring from bologna to stainless steel (mean EOT = 0.49) than from bologna to polyethylene (mean EOT = 0.28) (P < 0.01). Stainless steel with three different surface roughness (Ra) values of <0.8 μm (target Ra = 0.25, 0.50, and 0.75 μm) and two different finishes (mechanically polished versus mechanically polished and further electropolished) was used to evaluate its effect on the transfer. The surface roughness and finish on the stainless steel did not have any effect on the transfer of Listeria (P > 0.05). Our results showed that when evaluating the transfer of Listeria, the use of EOTs rather than the absolute transfer values is essential to allow comparisons of transfer conditions or comparisons between research groups.


2020 ◽  
Vol 4 (1) ◽  
pp. 78-90
Author(s):  
Daud Nawir ◽  
Achmad Zultan M

The use of asphalt (Liquid asbuton) as a road pavement material can be an economical and efficient choice for road construction and maintenance because, in addition to being cheaper and having better work abilities compared to other types of buton asphalt, a new step is carried out by using Asbuton liquid in a hot mix. One of the materials used is high-density polyethylene (HDPE) plastic waste. The ideal plastic prohibition needs to be balanced with waste management and financial incentives to change the habits of consumers and industry players. This research was conducted to determine the effect of using HDPE type plastic as an addition to the Asphalt Layer mixture Concrete (Laston) in terms of Marshall characteristics by using liquid asbuton and the level of plastic addition used was 2%, 4%, and 6% The results achieved were the addition of plastic waste flakes into the asphalt concrete mixture AC-BC can save asphalt 6% to the weight of asphalt The characteristics of the AC-BC mixture can be explained that with the addition of plastic waste flakes, stability will rise, flow decreases, Marshal Quotien (MQ) increases, VIM decreases, VMA decreases, VFB increases with increasing levels of effective asphalt, remaining marshall stability can be reached above 90%, and the cavity in the cam Puran at the refusal density can be achieved in the range greater than 2%.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Stavroula Sfaelou ◽  
Hrissi K. Karapanagioti ◽  
John Vakros

The main objective of this study was the evaluation of biofilm formation onto different supports and of biofilm efficiency to treat wastewater. Two different reactors were used, one with porous polyvinyl alcohol gel (PVA) biocarrier and another with a high-density polyethylene (PE) biocarrier. The reactor performance was evaluated and the biofilm formed was analyzed with potentiometric mass titrations. The biofilm formation was monitored with diffuse reflectance spectroscopy. The presence of the support did not alter the nature of the biofilm. However, the quantity of the biofilm formed was higher when polar surface groups were present on the support.


2015 ◽  
Vol 1115 ◽  
pp. 382-385 ◽  
Author(s):  
Husniyah Aliyah Lutpi ◽  
Hazleen Anuar ◽  
N.M. Shaffiar

For this decade, nanocomposite has received huge interest from over a thousand of researchers due to its outstanding properties in wide applications. Nanocomposite of sole shoes has become new development in sport shoes application while no interest from others has been reported. The purpose of this study is mainly to produce prototype and characterize flexing mechanism of nanocomposite outsole. The materials used for the outsole protoype were polymer matrix of high density polyethylene (HDPE) and ethylene propylene rubber (EPR) at ratio of 70:30 by wt% was added by 3 wt% of CNT nanofiller. The HDPE/EPR-CNT nanocomposites were prepared via single melt blending by using internal mixer and then compression moulded into outsole shape. The outsole was then gone through electron beam (EB) radiation at 100 kGy/s. The flexibility of unradiated and radiated nanocomposite outsole were tested by flexing test according to SATRA TM161 and ISO-17707 standard and fractography of the nanocomposite outsole was observed visually. EB radiated nanocomposite show high properties which suggesting that greater count number in flexing test and less void was observed compared to the unradiated nanocomposite.


2020 ◽  
Vol 10 (5) ◽  
pp. 1658
Author(s):  
Sorin Vlase ◽  
Marin Marin ◽  
Maria Luminița Scutaru ◽  
Dumitru Daniel Scărlătescu ◽  
Carol Csatlos

This paper studies the mechanical behavior of high-density polyethylene (HDPE), from which the pipes used for water transport in water supply networks are manufactured. The study was generated by the practical problem of replacing and modernizing a water network of a city with 300,000 inhabitants. Of the numerous problems that have arisen and been solved by the group of researchers, only those referring to the mechanical behavior of the materials used for pipes are presented. HDPE, which is a thermoplastic material, is suitable for manufacturing the pipes used in water supply networks, having many advantages. Data on the mechanical properties of the material of which the pipe and elbow are made is obtained experimentally. The work involved the main steps required to design a water network, but the subject is not exhausted. The stresses in the polyethylene pipe are determined in two cases: buried in the ground and supported in a concrete massif. Thus, by calculation, the advantage offered by the second solution is justified. The crack of the pipes manufactured from HDPE is studied, taking into account the classical model used in the cracking process. A simulation of pipes and elbows cracking was made. The results obtained via MEF are useful for the users of the networks.


Sign in / Sign up

Export Citation Format

Share Document