scholarly journals Biofilm Formation by Coagulase-Positive Staphylococcus aureus Isolated from Mozzarella Cheese Elaborated with Buffalo Milk and its Effect on Sensitivity to Sanitizers

2018 ◽  
Vol 46 (1) ◽  
pp. 6 ◽  
Author(s):  
Anelise Bravo Friedriczewski ◽  
Eliezer Ávila Gandra ◽  
Rita De Cássia dos Santos da Conceição ◽  
Natacha Deboni Cereser ◽  
Lauren Machado Moreira ◽  
...  

Background: The buffalo milk mozzarella cheese is a new product in the market, with high consumer acceptance and excellent prospects for trade. The cheese is rich in nutrients, which favors the proliferation of microorganisms that can cause food-borne diseases in the consumer. Staphylococcus aureus can cause gastro-enteritis in humans by the production of enterotoxins in food. One problem that may hinder the elimination of undesirable microorganisms in the food industry is the formation of biofilms. The objective of this study was to determine the effect of biofilm formation by Staphylococcus aureus isolated from buffalo mozzarella cheese on sensitivity to sanitizers.Materials, Methods & Results: Fifty samples of buffalo mozzarella cheese were analyzed to investigate the presence of S. aureus. The isolates were obtained through microbiological analysis and identified by PCR. The similarity of the strains was compared through rep-PCR. The distinct strains were tested for biofilm formation in microtiter plates. Soy Tripticase Broth (TSB) was placed in each well of the microtiter plate and overnight cultures of each strain was added. Wells without bacterial culture were used as controls. A villous cap was then placed on the plate and incubated for 48 h at 37°C. During incubation, the biofilms formed on the surface of the villi of the caps. For quantification of biofilm formation, material that remained attached to the cap was stained with crystal violet, the stained biofilm was extracted and the OD570 of each well was measured. Each strain was classified as non-biofilm forming, weak forming, moderately formed or formative strong. Strong forming and non-biofilm forming strains were tested on high density polyethylene, stainless steel and glass surfaces. Plates of 4 cm² of the different materials were placed in TSB where the culture of each isolate was inoculated separately. At each 48 h incubation the plates were washed to remove unbound cells and re-inserted into TSB without the inoculum. After five replicates of the procedure, sterile swabs were passed over the entire surface of each plate for counting in Baird-Parker agar. They were also tested for sensitivity to sodium hypochlorite and iodine after biofilm formation. The biofilm plates were immersed in flasks containing sanitizers, where they remained for 10 min. At the established contact time, the plates were immersed in neutralizing solution for 30 s. After washing with PBS, a sterile swab was passed on the surface of each plate and counts on Baird-Parker agar were performed. The bands profiles obtained on rep-PCR were identical when compared to isolates from the same sample, indicating that each sample was contaminated with only one S. aureus strain. From the twenty S. aureus strain identified, two isolates were classified as strong biofilm formers, seven as moderate formers, ten weak formers and one as non-biofilm builder. The two strong forming strains produced biofilm on the three surfaces tested. The application of sodium hypochlorite and iodine sanitizers promoted a reduction of approximately 2 log bacterial populations on all surfaces of both the biofilm and non-forming strains.Discussion: Most strains of S. aureus isolated from buffalo milk mozzarella cheese have the ability to form biofilm on the surfaces of equipment and utensils that have stainless steel, glass or high density polyethylene components. Although biofilm forming strains are no longer resistant to sanitizers sodium hypochlorite and iodine than non-forming sanitizers, they reach higher concentrations in the biofilm, resulting in larger bacterial populations remaining after application of the sanitizers. These results support the recommendation that the good hygienic practices adopted by industries processing buffalo milk mozzarella cheese should include specific measures to control the Staphylococcus aureus contamination.

2018 ◽  
Vol 48 (12) ◽  
Author(s):  
Janaina Viana da Rosa ◽  
Natália Volpato da Conceição ◽  
Rita de Cássia dos Santos da Conceição ◽  
Cláudio Dias Timm

ABSTRACT: Vibrio parahaemolyticus is an important pathogen for both fish industry and consumers. It forms biofilm which makes it difficult to eliminate this microorganism using sanitizers. This study aimed to assess biofilm formation on different surfaces and effect of biofilm on resistance to sanitizers. Eight isolates of biofilm-forming V. parahaemolyticus were tested for the ability to form biofilms on a number of surfaces including high density polyethylene, stainless steel, glass, exoskeleton of Farfantepenaeus paulensis (Pink Shrimp), and operculum of Micropogonias furnieri (Whitemouth Croaker). Efficiency of sanitizer sodium hypochlorite against the bacteria was evaluated in the biofilms formed on the surface of the materials used; out the eight strains analyzed four formed biofilm on different surfaces. The present study shows that there are variations between surfaces in terms of biofilm formation, with more than one bacterial strain being able to form biofilm on the surface of the operculum of M. furnieri and on high density polyethylene as well. One isolate formed biofilm on glass, and one isolate formed biofilm on stainless steel. Sanitizers reduced biofilm formation on all surfaces. Based on our findings, we concluded that V. parahaemolyticus isolates have different ability to form biofilm on different surfaces. No isolates formed biofilm on shrimp shells. Results of this study also showed that sodium hypochlorite eat a concentration of 20 parts per million (20ppm) of Cl2, albeit not able to eliminate bacteria reported in biofilms, is still capable of reducing bacterial populations.


2015 ◽  
Vol 61 (8) ◽  
pp. 539-544 ◽  
Author(s):  
Chao Gong ◽  
Xiuping Jiang

Hydrogen sulfide producing bacteria (SPB) in raw animal by-products are likely to grow and form biofilms in the rendering processing environments, resulting in the release of harmful hydrogen sulfide (H2S) gas. The objective of this study was to reduce SPB biofilms formed on different surfaces typically found in rendering plants by applying a bacteriophage cocktail. Using a 96-well microplate method, we determined that 3 SPB strains of Citrobacter freundii and Hafnia alvei are strong biofilm formers. Application of 9 bacteriophages (107 PFU/mL) from families of Siphoviridae and Myoviridae resulted in a 33%–70% reduction of biofilm formation by each SPB strain. On stainless steel and plastic templates, phage treatment (108 PFU/mL) reduced the attached cells of a mixed SPB culture (no biofilm) by 2.3 and 2.7 log CFU/cm2 within 6 h at 30 °C, respectively, as compared with 2 and 1.5 log CFU/cm2 reductions of SPB biofilms within 6 h at 30 °C. Phage treatment was also applied to indigenous SPB biofilms formed on the environmental surface, stainless steel, high-density polyethylene plastic, and rubber templates in a rendering plant. With phage treatment (109 PFU/mL), SPB biofilms were reduced by 0.7–1.4, 0.3–0.6, and 0.2–0.6 log CFU/cm2 in spring, summer, and fall trials, respectively. Our study demonstrated that bacteriophages could effectively reduce the selected SPB strains either attached to or in formed biofilms on various surfaces and could to some extent reduce the indigenous SPB biofilms on the surfaces in the rendering environment.


2012 ◽  
Vol 48 (4) ◽  
pp. 737-745
Author(s):  
Heloísa Maria Ângelo Jerônimo ◽  
Rita de Cássia Ramos do Egypto Queiroga ◽  
Ana Caroliny Vieira da Costa ◽  
Isabella de Medeiros Barbosa ◽  
Maria Lúcia da Conceição ◽  
...  

This study assessed the effect of different growth media [BHI broth, BHI broth plus glucose (10 g/100 mL) and BHI broth plus NaCl (5 g/100 mL)] and incubation temperatures (28 or 37 ºC) on the adherence, detachment and biofilm formation on polypropylene and stainless steel surfaces (2 x 2 cm coupons) for a prolonged period (24-72 h) by some strains of Staphylococcus aureus (S3, S28 and S54) from food processing plants. The efficacy of the sanitizers sodium hypochlorite (250 mg/mL) and peracetic acid (30 mg/mL) in reducing the number of viable bacterial cells in a preformed biofilm was also evaluated. S. aureus strains adhered in highest numbers in BHI broth, regardless of the type of surface or incubation temperature. Cell detachment from surfaces revealed high persistence over the incubation period. The number of cells needed for biofilm formation was noted in all experimental systems after 3 days. Peracetic acid and sodium hypochlorite were not efficient in completely removing the cells of S. aureus adhered onto polypropylene and stainless steel surfaces. From these results, the assayed strains revealed high capacities to adhere and form biofilms on polypropylene and stainless steel surfaces under the different growth conditions, and the cells in biofilm matrixes were resistant to total removal when exposed to the sanitizers sodium hypochlorite and peracetic acid.


2013 ◽  
Vol 24 (5) ◽  
pp. 487-491 ◽  
Author(s):  
Karen Tereza Altieri ◽  
Paula Volpato Sanitá ◽  
Ana Lucia Machado ◽  
Eunice Teresinha Giampaolo ◽  
Ana Cláudia Pavarina ◽  
...  

Methicillin-resistant Staphylococcus aureus (MRSA) can grow as structured biofilm in different surfaces, including oral mucosa and denture surfaces. Such biofilms can be released into the oral fluids and aspirated, causing systemic infections such as aspiration pneumonia. This study evaluated the efficacy of two disinfectant solutions and microwave irradiation in disinfecting acrylic specimens contaminated with MRSA biofilm. Thirty-six acrylic specimens were made, sterilized and contaminated with MRSA (107 cfu/mL). After incubation (37 °C/48 h), the specimens were divided into 4 groups: not disinfected (positive control); soaking in 1% sodium hypochlorite for 10 min; soaking in 2% chlorhexidine gluconate for 10 min; and irradiating by microwave for 3 min at 650 W. The viability of cells was evaluated by XTT reduction method. All specimens from the positive control group showed biofilm formation after 48 h incubation. The mean absorbance value of the control specimens was 1.58 (OD at 492 nm). No evidence of biofilm formation was observed on specimens after the disinfection methods. Disinfection by soaking in 1% sodium hypochlorite and 2% chlorhexidine gluconate and irradiating by microwaves resulted in 100% reduction of MRSA biofilm metabolism. The use of chemical solutions and microwave irradiation was shown to be effective for eradicating mature MRSA biofilms on acrylic resin specimens.


2007 ◽  
Vol 70 (6) ◽  
pp. 1423-1428 ◽  
Author(s):  
ANDRÉS RODRÍGUEZ ◽  
WESLEY R. AUTIO ◽  
LYNNE A. McLANDSBOROUGH

The influence of inoculation level, material hydration, and stainless steel surface roughness on the transfer of Listeria monocytogenes from inoculated bologna to processing surfaces (stainless steel and polyethylene) was assessed. Slices of bologna (14 g) were inoculated with Listeria at different levels, from 105 to 109 CFU/cm2. Transfer experiments were done at a constant contact time (30 s) and pressure (45 kPa) with a universal testing machine. After transfer, cells that had been transferred to sterile stainless steel and polyethylene were removed and counted, and the efficiency of transfer (EOT) was calculated. As the inoculation level increased from 105 to 109 CFU/cm2, the absolute level of transfer increased in a similar fashion. By calculating EOTs, the data were normalized, and the initial inoculation level had no effect on the transfer (P > 0.05). The influence of hydration level on stainless steel, high-density polyethylene, and material type was investigated, and the EOTs ranged from 0.1 to 1 under all the conditions tested. Our results show that transfers to wetted processing surfaces (mean EOT = 0.43) were no different from dried processing surfaces (mean EOT = 0.35) (P > 0.05). Material type was shown to be a significant factor, with greater numbers of Listeria transferring from bologna to stainless steel (mean EOT = 0.49) than from bologna to polyethylene (mean EOT = 0.28) (P < 0.01). Stainless steel with three different surface roughness (Ra) values of <0.8 μm (target Ra = 0.25, 0.50, and 0.75 μm) and two different finishes (mechanically polished versus mechanically polished and further electropolished) was used to evaluate its effect on the transfer. The surface roughness and finish on the stainless steel did not have any effect on the transfer of Listeria (P > 0.05). Our results showed that when evaluating the transfer of Listeria, the use of EOTs rather than the absolute transfer values is essential to allow comparisons of transfer conditions or comparisons between research groups.


Genes ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1883
Author(s):  
Martin Fayolle ◽  
Madjid Morsli ◽  
Anthony Gelis ◽  
Marion Chateauraynaud ◽  
Alex Yahiaoui-Martinez ◽  
...  

Decubitus pressure ulcers (PU) are a major complication of immobilised patients. Staphylococcus aureus is one of the most frequently detected microorganisms in PU samples; however, its persistence and role in the evolution of these wounds is unknown. In this study, we analysed S. aureus strains isolated from PU biopsies at inclusion and day 28. Eleven S. aureus (21.1%) were detected in 52 patients at inclusion. Only six PUs (11.5%) continued to harbour this bacterium at day 28. Using a whole genome sequencing approach (Miseq®, Illumina), we confirmed that these six S. aureus samples isolated at D28 were the same strain as that isolated at inclusion, with less than 83 bp difference. Phenotypical studies evaluating the growth profiles (Infinite M Mano, Tecan®) and biofilm formation (Biofilm Ring Test®) did not detect any significant difference in the fitness of the pairs of S. aureus. However, using the Caenorhabditis elegans killing assay, a clear decrease of virulence was observed between strains isolated at D28 compared with those isolated at inclusion, regardless of the clinical evolution of the PU. Moreover, all strains at inclusion were less virulent than a control S. aureus strain, i.e., NSA739. An analysis of polymicrobial communities of PU (by metabarcoding approach), in which S. aureus persisted, demonstrated no impact of Staphylococcus genus on PU evolution. Our study suggested that S. aureus presented a colonising profile on PU with no influence on wound evolution.


2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Stavroula Sfaelou ◽  
Hrissi K. Karapanagioti ◽  
John Vakros

The main objective of this study was the evaluation of biofilm formation onto different supports and of biofilm efficiency to treat wastewater. Two different reactors were used, one with porous polyvinyl alcohol gel (PVA) biocarrier and another with a high-density polyethylene (PE) biocarrier. The reactor performance was evaluated and the biofilm formed was analyzed with potentiometric mass titrations. The biofilm formation was monitored with diffuse reflectance spectroscopy. The presence of the support did not alter the nature of the biofilm. However, the quantity of the biofilm formed was higher when polar surface groups were present on the support.


2006 ◽  
Vol 50 (4) ◽  
pp. 1463-1469 ◽  
Author(s):  
M. A. Jabra-Rizk ◽  
T. F. Meiller ◽  
C. E. James ◽  
M. E. Shirtliff

ABSTRACT Staphylococcus aureus is among the leading pathogens causing bloodstream infections able to form biofilms on host tissue and indwelling medical devices and to persist and cause disease. Infections caused by S. aureus are becoming more difficult to treat because of increasing resistance to antibiotics. In a biofilm environment particularly, microbes exhibit enhanced resistance to antimicrobial agents. Recently, farnesol was described as a quorum-sensing molecule with possible antimicrobial properties. In this study, the effect of farnesol on methicillin-resistant and -susceptible strains of S. aureus was investigated. With viability assays, biofilm formation assessment, and ethidium bromide uptake testing, farnesol was shown to inhibit biofilm formation and compromise cell membrane integrity. The ability of farnesol to sensitize S. aureus to antimicrobials was assessed by agar disk diffusion and broth microdilution methods. For both strains of staphylococci, farnesol was only able to reverse resistance at a high concentration (150 μM). However, it was very successful at enhancing the antimicrobial efficacy of all of the antibiotics to which the strains were somewhat susceptible. Therefore, synergy testing of farnesol and gentamicin was performed with static biofilms exposed to various concentrations of both agents. Plate counts of harvested biofilm cells at 0, 4, and 24 h posttreatment indicated that the combined effect of gentamicin at 2.5 times the MIC and farnesol at 100 μM (22 μg/ml) was able to reduce bacterial populations by more than 2 log units, demonstrating synergy between the two antimicrobial agents. This observed sensitization of resistant strains to antimicrobials and the observed synergistic effect with gentamicin indicate a potential application for farnesol as an adjuvant therapeutic agent for the prevention of biofilm-related infections and promotion of drug resistance reversal.


Sign in / Sign up

Export Citation Format

Share Document