scholarly journals Study of obtaining thin films of CeO2 doped with 2 and 4 mol% of europium, terbium and thulium by spin coating: photocatalytic properties

Cerâmica ◽  
2019 ◽  
Vol 65 (376) ◽  
pp. 515-522
Author(s):  
B. P. Dias ◽  
N. F. Andrade Neto ◽  
L. M. P. Garcia ◽  
M. R. D. Bomio ◽  
F. V. Motta
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Spin Coating ◽  
Secondary Phase ◽  
Blue Dye ◽  
Surface Porosity ◽  
Secondary Phase Formation ◽  
Doped Ceo2 ◽  
Xrd Patterns

Abstract In this study, thin films of Eu3+, Tb3+ and Tm3+ doped CeO2 in the proportions of 2 and 4 mol% were obtained by spin coating and calcined at 700 °C. The films were characterized by XRD, SEM, AFM and UV-vis techniques. The photocatalytic activity of the thin films was measured by the degradation of the methylene blue (MB) dye. The thin films were submitted to 4 photocatalytic cycles to analyze the capacity to be reused. XRD patterns showed no secondary phase formation, where all characteristic peaks were related to CeO2. SEM micrographs indicated that doping at 4 mol% promoted the reduction in the thickness and surface porosity of the thin films. AFM images indicated the increase in surface roughness with rare earths doping. Doping with Eu3+, Tb3+ and Tm3+ increased the degradation of the methylene blue dye by at least 15% for thin films doped at 4 mol%. The reuse tests indicated that the photocatalytic activity remained practically constant even with the application of four consecutive cycles.

Secondary Phase Formation and Microstructural Development in the Interaction Between SrBi2Ta2O9 Films and Pt/Ti/SiO2/Si Substrates

1997 ◽  
Vol 12 (8) ◽  
pp. 2104-2110 ◽  
Author(s):  
Chung-Hsin Lu ◽  
Buh-Kuan Fang
Keyword(s):  
Thin Films ◽  
Phase Formation ◽  
Spin Coating ◽  
Pyrochlore Phase ◽  
Pyrochlore Structure ◽  
Secondary Phase ◽  
Microstructural Development ◽  
Titanium Layer ◽  
Si Substrates ◽  
Secondary Phase Formation

The phase formation and microstructural development of SrBi2Ta2O9 thin films prepared via spin-coating using metalorganic solution on Pt/Ti/SiO2/Si substrates have been investigated in this study. The spun-on films started to crystallize from above 550 °C and were well crystallized at 800 °C. At higher than 850 °C a secondary phase having a pyrochlore structure was formed in the films. The analysis of EDS and SIMS confirmed that the interaction between the films and the titanium species which diffused outward from the titanium layer on substrates was the origin for the occurrence of the pyrochlore phase. In addition, varying the thickness of the coated films and platinum layers had remarkable influence on the formation amount of the pyrochlore phase.

Photocatalytic Activities of Mo Ions Implanted TiO2 Thin Films

2011 ◽  
Vol 335-336 ◽  
pp. 1508-1511
Author(s):  
Shu Kai Zheng
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Optimal Dose ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Slides ◽  
Photocatalytic Activities

Transparent TiO2 thin films were deposited onto microscope glass slides by means of d.c. magnetron sputtering method. In order to enhance the photocatalytic activity of TiO2 thin films, Mo ions with different nominal doses were implanted into the TiO2 thin films. The samples were characterized by different technologies including X-ray diffraction (XRD), X-ray photoelectron spectroscope (XPS) and UV-VIS-NIR spectrophotometer. The photodegradation results of methylene blue dye solution indicated that optimal dose of 2×1012ions/cm2 Mo ion-implantation resulted in a higher photocatalytic activity in the implanted TiO2 thin films.

Photocatalytic degradation of methylene blue from aqueous solutions using nanopillars-TiO2 thin films: Batch reactor studies

2018 ◽  
Vol 18 (3) ◽  
pp. 81-91 ◽  
Author(s):  
C. Lalhriatpuia
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Organic Carbon ◽  
Photocatalytic Degradation ◽  
Batch Reactor ◽  
Tio2 Thin Films ◽  
Initial Concentration ◽  
Bet Specific Surface Area ◽  
Interfering Ions

Nanopillars-TiO2 thin films was obtained on a borosilicate glass substrate with (S1) and without (S2) polyethylene glycol as template. The photocatalytic behaviour of S1 and S2 thin films was assessed inthe degradation of methylene blue (MB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the SEM, XRD, FTIR and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data confirmed that the TiO2 particles are in its anatase mineral phase. The SEM and AFM images indicated the catalyst is composed with nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of MB was well studied at wide range of physico-chemical parameters. The effect of solution pH (pH 4.0 to 10.0) and MB initial concentration (1.0 to 10.0 mg/L) was extensively studied and the effect of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of MB was demonstrated. The maximum percent removal of MB was observed at pH 8.0 beyond which it started decreasing and a low initial concentration of the pollutant highly favoured the photocatalytic degradation using thin films and the presence of several interfering ions diminished the photocatalytic activity of thin films to some extent. The overall photocatalytic activity was in the order: S2 > S1 > UV. The photocatalytic degradation of MB was followed the pseudo-first-order rate kinetics. The mineralization of MB was studied with total organic carbon measurement using the TOC (total organic carbon) analysis.

STRUCTURAL, OPTICAL PROPERTIES AND PHOTOCATALYTIC ACTIVITY OF NANOCRYSTALLINE TiO2 THIN FILMS DEPOSITED BY SOL-GEL SPIN COATING

2019 ◽  
Vol 7 (1) ◽  
pp. 28
Author(s):  
KOMARAIAH DURGAM ◽  
RADHA EPPA ◽  
REDDY M. V. RAMANA ◽  
KUMAR J. SIVA ◽  
R. SAYANNA ◽  
...  
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Photocatalytic Activity ◽  
Spin Coating ◽  
Sol Gel ◽  
Tio2 Thin Films ◽  
Nanocrystalline Tio2

scholarly journals Highly Porous and Ultra-Lightweight Aero-Ga2O3: Enhancement of Photocatalytic Activity by Noble Metals

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1985
Author(s):  
Irina Plesco ◽  
Vladimir Ciobanu ◽  
Tudor Braniste ◽  
Veaceslav Ursaki ◽  
Florian Rasch ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Noble Metals ◽  
Hybrid Structures ◽  
Blue Dye ◽  
Light Illumination ◽  
Methylene Blue Dye ◽  
Visible Light Illumination ◽  
New Type ◽  
Highly Porous

A new type of photocatalyst is proposed on the basis of aero-β-Ga2O3, which is a material constructed from a network of interconnected tetrapods with arms in the form of microtubes with nanometric walls. The aero-Ga2O3 material is obtained by annealing of aero-GaN fabricated by epitaxial growth on ZnO microtetrapods. The hybrid structures composed of aero-Ga2O3 functionalized with Au or Pt nanodots were tested for the photocatalytic degradation of methylene blue dye under UV or visible light illumination. The functionalization of aero-Ga2O3 with noble metals results in the enhancement of the photocatalytic performances of bare material, reaching the performances inherent to ZnO while gaining the advantage of the increased chemical stability. The mechanisms of enhancement of the photocatalytic properties by activating aero-Ga2O3 with noble metals are discussed to elucidate their potential for environmental applications.

Photocatalytic Degradation of Methylene Blue by NiO Thin Films under Solar Light Irradiation

2019 ◽  
Vol 56 ◽  
pp. 152-157 ◽  
Author(s):  
Abdelouahab Noua ◽  
Hichem Farh ◽  
Rebai Guemini ◽  
Oussama Zaoui ◽  
Tarek Diab Ounis ◽  
...  
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Sol Gel ◽  
Visible Region ◽  
Optical Transmittance ◽  
Dip Coating ◽  
Light Irradiation ◽  
Solar Light ◽  
Solar Light Irradiation

Nickel oxide (NiO) thin films were successfully deposited by sol-gel dip-coating method on glass substrates. The structural, morphological and optical properties in addition to the photocatalytic activity of the prepared films were investigated. The results show that the films have a polycrystalline NiO cubic structure with dense NiO grains and average optical transmittance in the visible region. The photocatalytic properties of the films were studied through the degradation of methylene blue and 89% of degradation was achieved for 4.5h of solar light irradiation exposure which indicates the capability of NiO photocatalytic activity.

scholarly journals Synthesis and Characterization of Ag@C-TiO2 Nanocomposite for Degradation of Sasirangan Textile Wastewater

2019 ◽  
Vol 22 (6) ◽  
pp. 299-304
Author(s):  
Heny Puspita Dewi ◽  
Joko Santoso ◽  
Nur Firda Trianda ◽  
Rodiansono Rodiansono
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Textile Wastewater ◽  
Band Gap Energy ◽  
Tio2 Photocatalyst ◽  
Composite Photocatalysts ◽  
Xrd Patterns ◽  
Brookite Phase

Carbon-titanium oxide nanocomposite (denoted as @C-TiO2) was successfully synthesized via hydrothermal method at 150°C for 24 h. The C-TiO2 nanocomposite was furtherly modified by adding an Ag metal dopant (denoted as Ag@C-TiO2) to improve and applied to the photocatalytic degradation of Sasirangan textile wastewater. The composite photocatalysts were characterized by XRD and UV–Vis DRS spectroscopies. XRD patterns showed that TiO2 in @C-TiO2 mainly consisted of a brookite phase, as indicated by a series sharp diffraction peak at 2θ = 27.2° (111), 31.5° (121) and 55.9° (241). The calculated band gap energy (Eg) derived from UV-Vis DRS spectra for TiO2, @C-TiO2, and Ag@C-TiO2 were 2.95 eV, 2.54 eV, and 2.74 eV, respectively. Ag@C-TiO2 photocatalyst was found to be active for the photocatalytic degradation of Sasirangan textile wastewater, as indicated by the change of wastewater color from dark to clear. The quantitative photocatalytic activity of Ag@C-TiO2 was evaluated in the degradation of methylene blue, whereas the conversion of methylene blue was 41.3%. The addition of Ag to @C-TiO2 is believed to play an essential role in the enhancement of photocatalytic activity.

Structural and Magnetic Investigation of Cu, Co Substituted NiFe2O4 Thin Films by Scanning Probe Microscopy (AFM, MFM)

2015 ◽  
Vol 830-831 ◽  
pp. 589-591 ◽  
Author(s):  
Hakikat Sharma ◽  
N.S. Negi
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Microstructural Analysis ◽  
Secondary Phase ◽  
Scanning Probe ◽  
Force Microscopy ◽  
Atomic Force ◽  
Magnetic Investigation ◽  
Probe Microscope ◽  
Xrd Patterns

In the present study we prepared NiFe2O4, Ni0.95Cu0.05Fe2O4and Ni0.94Cu0.05Co0.01Fe2O4thin films by metallo-organic decomposition method (MOD) using spin coating technique. The samples were characterized by XRD. XRD patterns of thin films confirmed the formation of cubic spinel structure without any secondary phase. For microstructural analysis we characterized samples by Scanning Probe Microscope (SPM). From Atomic force microscopy (AFM), we analyzed surface morphology, calculated grain size, roughness and porosity. It has been found that grain size and roughness affected by Cu, Co substitution. After this we carried out magnetic force microscopy (MFM) on the samples. Effect of substitution on magnetic grains was observed from MFM.

Epitaxy of Porous and Photocatalytically Active TiO2 Films at 50°C

2011 ◽  
Vol 64 (9) ◽  
pp. 1235 ◽  
Author(s):  
Gregory K. L. Goh ◽  
Kelvin Y. S. Chan ◽  
Gao S. Huang ◽  
Qui L. Tay
Keyword(s):  
Thin Films ◽  
Methylene Blue ◽  
Liquid Phase ◽  
Anatase Tio2 ◽  
Blue Dye ◽  
Tio2 Films ◽  
Methylene Blue Dye ◽  
Liquid Phase Deposition ◽  
Grown Film ◽  
Tio2 Thin Films

Epitaxial anatase TiO2 thin films were grown on (001) oriented SrTiO3 single crystal substrates by liquid phase deposition at 50°C. The film consisted of nanosized crystallites and exhibited a significant void fraction of 31 %. This contributed to the cracking of thicker films due to the generation of capillary stresses in the nanosized pores during drying. This porosity also comes in useful during the photodegradation of a methylene blue dye by an as-grown film.

Sign in / Sign up

Export Citation Format

Share Document