scholarly journals Synthesis and characterization of lanthanum- and yttrium-doped Fe2O3 pigments

Cerâmica ◽  
2007 ◽  
Vol 53 (325) ◽  
pp. 79-82 ◽  
Author(s):  
D. M. A. Melo ◽  
M. A .F. Melo ◽  
A. E. Martinelli ◽  
Z. R. Silva ◽  
J. D. Cunha ◽  
...  
Keyword(s):  
Rare Earth ◽  
Calcination Temperature ◽  
Structural Changes ◽  
Pechini Method ◽  
Color Stability ◽  
Rare Earth Ions ◽  
X Ray Diffraction ◽  
Rare Earth Ion ◽  
Uv Visible

Iron oxide has been doped with rare earth ions (yttrium or lanthanum) aiming at producing ceramic pigments with hues that vary from orange to brown. The powders were synthesized from polymeric precursors using the Pechini method and subsequently calcined between 900 and 1100 ºC. The resulting pigments were characterized by BET, X ray diffraction, colorimetric analysis, UV-visible, infrared (FTIR), particle size distribution and thermal analysis. The color depicted by La/Fe powders changed as the calcination temperature increased from 900 ºC to 1100 ºC, as established by the corresponding changes in the values of the colorimetric coordinates from L* a* b* = 49.003, 10.541, 12.609 to L* a* b* = 31.279, 6.096, 6.877. On the other hand, Y/Fe powders were little affected by similar changes in the calcination temperature, revealing the effect of yttrium on the color stability of the powder. The values of the colorimetric coordinates in this case varied from L* a* b* = 45.230, 17.315, 28.750 to L* a* b* =51.631, 15.726, 25.825. Structural changes were also noticed as a function of the size of the rare earth ion added to the structure. Upon calcination at 900°C, lanthanum stabilized the ABO3-type perovskite structure whereas the presence of yttrium resulted in a mixture of oxides.

Preparation and Characterization of Rare Earth Ions Doped Fluoride Core-Shell up-Conversion Luminescence Nanomaterials

2012 ◽  
Vol 512-515 ◽  
pp. 1972-1975
Author(s):  
Jun Zhang ◽  
Hai Ou Shen ◽  
Shun Hao Wang ◽  
Yan Li Li ◽  
Hui Xin ◽  
...  
Keyword(s):  
Rare Earth ◽  
Rare Earth Ions ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Rare Earth Ion ◽  
Application Range ◽  
Transmission Electron ◽  
Heterogeneous Layer ◽  
Core Nanoparticles

Coating a heterogeneous layer outside the core nanoparticles has become a common method to protect the properties of nanoparticles and may extend the application range of core nanoparticles. Rare earth ion-doped nanoparticles NaYF4:Yb 3+ ,Er 3+ is one of the most efficient up-conversion nanosystems. In this work, a multi-functional NaYF4:Yb 3+ ,Er 3+ @TiO2 core-shell structure nanocomposite was synthesized. The structure, optical and photoluminescence properties of the up-converting nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and room temperature up-conversion luminescence (UCL) spectrofluorimetric measurements.

scholarly journals Structural and morphological characterization of rare earth modified lead titanate

Cerâmica ◽  
2007 ◽  
Vol 53 (328) ◽  
pp. 422-447
Author(s):  
F. C. D. Lemos ◽  
D. M. A. Melo ◽  
P. S. de Lima ◽  
C. A. Paskocimas ◽  
E. Longo ◽  
...  
Keyword(s):  
Rare Earth ◽  
Lead Titanate ◽  
Pechini Method ◽  
Morphological Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Crystallite Sizes ◽  
Modifier Cation

Rare earth modified lead titanate powders Pb1-xRExTiO3 (REPT), x = 0.01, 0.05, 0.07 and RE = Yb, Y, were prepared by the Pechini method. The materials were calcined under flowing oxygen at different temperatures from 300 to 700 ºC. Nanostructured REPT were investigated using X-ray diffraction, scanning electron microscopy and surface area analysis (BET). The results suggest that the modifier cation incorporated into the system has notable influence in the microstructure and a notable decrease in the crystallite sizes.

Synthesis, Morphology Control and Luminescent Properties of Rare Earth Ion-Doped CaWO4 Microstructures

2016 ◽  
Vol 16 (4) ◽  
pp. 4029-4034 ◽  
Author(s):  
Chunxia Liu ◽  
Lixia Yang ◽  
Dan Yue ◽  
Mengnan Wang ◽  
Lin Jin ◽  
...  
Keyword(s):  
Rare Earth ◽  
Uv Light ◽  
Luminescent Properties ◽  
Average Diameter ◽  
Rare Earth Ions ◽  
X Ray Diffraction ◽  
Hydrothermal Route ◽  
Rare Earth Ion ◽  
X Ray ◽  
Facile Hydrothermal Route

Rare earth ions (Tb3+, Eu3+) doped CaWO4 microstructures were synthesized by a facile hydrothermal route without using any templates and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL) spectrum. The results indicate that the asprepared samples are well crystallized with scheelite structure of CaWO4, and the average diameter of the microstructures is 2∼4 μm. The morphology of CaWO4:Eu3+ microstructures can be controllably changed from microspheres to microflowers through altering the doping concentration of Eu3+ from 3% to 35%, and the microflowers are constructed by a number of CaWO4:Eu3+ nanoflakes. Under the excitation of UV light, the emission spectrum of CaWO4:Eu3+ is composed of the characteristics emission of Eu3+ 5D0-7FJ (J = 1, 2, 3, 4) transitions, and that of CaWO4:Tb3+ is composed of Tb3+ 5D4-7FJ (J = 6, 5, 4, 3) transitions. Both of the optimal doping concentrations of Tb3+ and Eu3+ in CaWO4 microstructures are about 5%.

scholarly journals Synthesis and Characterization of Sr2CeO4 Phosphor Doped with Erbium

2010 ◽  
Vol 13 (1-2) ◽  
pp. 17
Author(s):  
K.V.R. Murthy ◽  
K. Suresh ◽  
B. Nageswara Rao ◽  
B. Walter Ratna Kumar ◽  
Ch. Atchyutha Rao ◽  
...  
Keyword(s):  
Rare Earth ◽  
Solid State ◽  
Sem Analysis ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rare Earth Ion ◽  
Solid State Reaction Technique ◽  
X Ray ◽  
Pl Emission

<p>The present paper reports the Photoluminescence (PL) of the Sr<sub>2</sub>CeO<sub>4</sub> phosphor, singly doped with Erbium rare-earth ion with different concentrations (0.01, 0.1, 0.2, 0.5 and 1%).The phosphor samples were synthesized using the standard solid state reaction technique. The effect of Er dopant on the structural, morphological, and Photoluminescent properties of the samples are studied with X-ray diffraction (XRD), PL and SEM analysis. The PL emission of undoped Sr<sub>2</sub>CeO<sub>4</sub> phosphor was observed at 470 nm with high intensity followed by the primary Er emissions with good intensity at 525, 530, 549, 557 and 565 nm.</p>

scholarly journals The Impact of Highly Paramagnetic Dy3+ Cations On Magnetic and Electrical Behaviour of Nanocrystalline Mnfe2o4

2021 ◽  
Author(s):  
Mirza Mahmood Baig ◽  
Sonia Zulfiqar ◽  
Muhammad Asif Yousuf ◽  
Muhammad Touqeer ◽  
Philips O Agboola ◽  
...  
Keyword(s):  
Rare Earth ◽  
Structural Changes ◽  
Spin Exchange ◽  
Magnetic Measurements ◽  
Exchange Interactions ◽  
Rare Earth Ions ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
Switching Mode ◽  
The Impact

Abstract In this paper, the detailed study of magnetic properties of Dy3+ substituted soft manganese ferrite (MnFe2O4) nanoparticles with varied contents of Dy3+ ions (0.00 ≤ x ≤ 0.16) was carried out by vibrating sample magnetometery (VSM) at room temperature. The synthesis of reported magnetic materials was carried out via facile wet chemical route. Structural characterization was investigated via X-ray diffraction and infra-red spectroscopy. Exploration of magnetic measurements revealed an irregular behavior in the values of saturation magnetization (Ms), remanent magnetization (Mr), and coercivity (Hc) depending upon the concentration of rare-earth ions (Dy3+). The fluctuations in the values of Ms, Mr, and Hc may be associated with the modifications in the spin-exchange interactions caused by structural changes due to the substitution of rare-earth ions (Dy3+). DC electrical resistivity values were recorded and were found to be increased with increased Dy3+ contents. The soft magnetic nature of Dy3+ substituted MnFe2O4 spinel ferrites nanoparticles suggested their possible utilization in switching mode power supplies, recording media, spintronics, and many other advanced technological devices.

scholarly journals Structure, Luminescence, and Magnetic Properties of Crystalline Manganese Tungstate Doped with Rare Earth Ion

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3717
Author(s):  
Jae-Young Jung ◽  
Soung-Soo Yi ◽  
Dong-Hyun Hwang ◽  
Chang-Sik Son
Keyword(s):  
Magnetic Field ◽  
Rare Earth ◽  
Sintering Temperature ◽  
Luminescent Properties ◽  
Concentration Quenching ◽  
Rare Earth Ions ◽  
Precipitation Method ◽  
Rare Earth Ion ◽  
Co Precipitation ◽  
Quenching Phenomenon

The precursor prepared by co-precipitation method was sintered at various temperatures to synthesize crystalline manganese tungstate (MnWO4). Sintered MnWO4 showed the best crystallinity at a sintering temperature of 800 °C. Rare earth ion (Dysprosium; Dy3+) was added when preparing the precursor to enhance the magnetic and luminescent properties of crystalline MnWO4 based on these sintering temperature conditions. As the amount of rare earth ions was changed, the magnetic and luminescent characteristics were enhanced; however, after 0.1 mol.%, the luminescent characteristics decreased due to the concentration quenching phenomenon. In addition, a composite was prepared by mixing MnWO4 powder, with enhanced magnetism and luminescence properties due to the addition of dysprosium, with epoxy. To one of the two prepared composites a magnetic field was applied to induce alignment of the MnWO4 particles. Aligned particles showed stronger luminescence than the composite sample prepared with unsorted particles. As a result of this, it was suggested that it can be used as phosphor and a photosensitizer by utilizing the magnetic and luminescent properties of the synthesized MnWO4 powder with the addition of rare earth ions.

Synthesis and Characterization of Multiferroic NiFe2O4/BiFeO3 Nanocomposites by Modified Pechini Method

2011 ◽  
Vol 197-198 ◽  
pp. 456-459
Author(s):  
Xian Ming Liu ◽  
Wen Liang Gao
Keyword(s):  
Pechini Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Magnetic Bias ◽  
Field Frequency ◽  
Magnetic Field Frequency ◽  
X Ray ◽  
Structure And Morphology ◽  
Modified Pechini Method

Spinel-perovskite multiferroics of NiFe2O4/BiFeO3 nanoparticles were prepared by modified Pechini method. The structure and morphology of the composites were examined by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the composites consisted of spinel NiFe2O4 and perovskite BiFeO3 after annealed at 700°C for 2h, and the particle size ranges from 40 to 100nm. VSM and ME results indicated that the nanocomposites exhibited both tuning magnetic properties and a ME effect. The ME effect of the nanocomposites strongly depended on the magnetic bias and magnetic field frequency.

Characterization of New Nonstoichiometric Ferroelectric (Li0.95Cu0.15)Ta0.76Nb0.19O3 and Comparative Study With (Li0.95Cu0.15)Ta0.57Nb0.38O3 as Photocatalysts in Microbial Fuel Cells

2018 ◽  
Vol 16 (2) ◽  
Author(s):  
S. Louki ◽  
N. Touach ◽  
A. Benzaouak ◽  
V. M. Ortiz-Martínez ◽  
M. J. Salar-García ◽  
...  
Keyword(s):  
Power Density ◽  
Microbial Fuel Cells ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ferroelectric Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Uv Visible

This work investigates the photocatalytic activity of new ferroelectric material with formula (Li0.95Cu0.15)Ta0.76Nb0.19O3 (LT76) in a single chamber microbial fuel cell (MFC) and compares its performance with the similar photocatalyst (Li0.95Cu0.15)Ta0.57Nb0.38O3 (LT57). The photocatalysts LT76 and LT57 were synthesized by ceramic route under the same conditions, with the same starting materials. The ratio Ta/Nb was fixed at 4.0 and 1.5 for LT76 and LT57, respectively. These phases were characterized by different techniques including X-ray diffraction (XRD), transmission electronic microscopy (TEM), particle size distribution (PSD), differential scanning calorimetry (DSC), and ultraviolet (UV)–visible (Vis). The new photocatalyst LT76 presents specific surface area of 0.791 m2/g and Curie temperature of 1197 °C. The photocatalytic efficiency of this material is assessed in terms of wastewater treatment and electricity generation by power density and removal rate of chemical oxygen demand (COD) in the presence of a light source. The values of maximum power density and COD removal were 19.77 mW/m3 and 93%, respectively, for LT76.

scholarly journals PECHINI SYNTHESIS AND CHARACTERIZATION OF Eu3+ DOPED ZnCo2O4 SPINELS

2005 ◽  
Vol 03 (2) ◽  
pp. 24-29
Author(s):  
P.M. PIMENTEL ◽  
A.M.G. PEDROSA ◽  
H.K.S. SOUZA ◽  
C.N.S. JÚNIOR ◽  
R.C.A. PINTO ◽  
...  
Keyword(s):  
Spinel Structure ◽  
Pechini Method ◽  
Synthesis Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spinel Oxides ◽  
Diffraction Patterns ◽  
Pechini Synthesis ◽  
Spinel Structures

Spinel oxides with the composition ZnCo2O4 and ZnCo2O4:Eu3+ have been synthesized by the Pechini method and characterized by X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. IR spectroscopy revealed the presence of n1 and n2 bands, typical of spinel structures. The formation of monophase cubic spinel structure was confirmed by X-ray diffraction patterns. Extra lines corresponding to other phase has been observed in the powders calcined at 900 ºC. The results showed the extremely lower synthesis temperature than those presents in conventional methods.

scholarly journals Copper Containing Glass-Based Bone Adhesives for Orthopaedic Applications: Glass Characterization and Advanced Mechanical Evaluation

2020 ◽  
Author(s):  
Sahar. Mokhtari ◽  
Anthony.W. Wren
Keyword(s):  
Mechanical Properties ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Viscoelastic Behavior ◽  
Polymer Chains ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compression Data

AbstractThis study addresses issues with currently used bone adhesives, by producing novel glass based skeletal adhesives through modification of the base glass composition to include copper (Cu) and by characterizing each glass with respect to structural changes. Bioactive glasses have found applications in fields such as orthopedics and dentistry, where they have been utilized for the restoration of bone and teeth. The present work outlines the formation of flexible organic-inorganic polyacrylic acid (PAA) – glass hybrids, commercial forms are known as glass ionomer cements (GICs). Initial stages of this research will involve characterization of the Cu-glasses, significant to evaluate the properties of the resulting adhesives. Scanning electron microscopy (SEM) of annealed Cu glasses indicates the presence of partial crystallization in the glass. The structural analysis of the glass using Raman suggests the formation of CuO nanocrystals on the surface. X-ray diffraction (XRD) pattern and X-ray photoelectron spectroscopy (XPS) further confirmed the formation of crystalline CuO phases on the surface of the annealed Cu-glass. The setting reaction was studied using Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the Cu containing adhesives exhibited gel viscoelastic behavior and enhanced mechanical properties when compared to the control composition. Compression data indicated the Cu glass adhesives were efficient at energy dissipation due to the reversible interactions between CuO nano particles and PAA polymer chains.

Sign in / Sign up

Export Citation Format

Share Document