scholarly journals Growth analysis and yield of tomato crop under different irrigation depths

2013 ◽  
Vol 17 (9) ◽  
pp. 926-931 ◽  
Author(s):  
José A. Monte ◽  
Daniel F. de Carvalho ◽  
Leonardo O. Medici ◽  
Leonardo D. B. da Silva ◽  
Carlos Pimentel
Keyword(s):  
Leaf Area ◽  
Growth Parameters ◽  
Block Design ◽  
Total Production ◽  
Tomato Crop ◽  
Tomato Fruits ◽  
Area Index ◽  
Irrigation Depth ◽  
Different Depths ◽  
Commercial Yield

The influence of irrigation depth was evaluated on tomato crop hybrid Debora plus for salad in a field experiment in split-block design with five treatments (irrigation depth of 40, 60, 80, 100 and 120% of crop evapotranspiration - ETc) and four replications. During the experiment, ten plant samples were collected to determine phytomass and leaf area to estimate plant growth parameters for different depths of irrigation. Results showed maximal growth between 70 and 80 days after transplanting in all treatments. Increase in irrigation depth above 80% of ETc increased crop growth rate (CGR), leaf area index (LAI) and total production of tomato fruits, although same commercial fruit yield was obtained with the lower depths. Therefore, an increase in depth of irrigation above 80% of ETc promotes higher water and energy consumption, without providing an increase in commercial yield of tomato fruits.

scholarly journals Effect of Foliar Application of Growth Regulators on Vegetative and Physiological Growth Parameters in Ajowan (Trachyspermum ammi L. Sprague)

2020 ◽  
pp. 100-109
Author(s):  
Y. Rajasekhara Reddy ◽  
G. Ramanandam ◽  
P. Subbaramamma ◽  
A. V. D. Dorajeerao
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth Parameters ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Trachyspermum Ammi ◽  
Number Of Leaves

A field experiment was carried out during rabi season of 2018-2019, at college farm, College of Horticulture, Dr. Y.S.R. Horticultural University, Venkataramannagudem, West Godavari District, Andhra Pradesh. The experiment was laidout in a Randomised Block Design with eleven treatments (viz., T1- NAA @ 50 ppm, T2-NAA @ 100 ppm, T3-GA3 @ 50 ppm,  T4-GA3 @ 100 ppm, T5-Thiourea @ 250 ppm, T6-Thiourea @ 500 ppm, T7-28-Homobrassinolide @ 0.1 ppm, T8-28-Homobrassinolide @ 0.2 ppm, T9-Triacontinol @ 2.5 ppm, T10-Triacontinol @ 5 ppm, T11-(Control) Water spray) and three replications. The treatments were imposed at 30 and 45 DAT in the form of foliar spray. Foliar application of GA3@ 100 ppm (T4) had recorded the maximum plant height (108.20 cm), leaf area (9.53 cm2) and leaf area index (0.74). Foliar application of thiourea @ 250 ppm (T5) had recorded the maximum values with respect to number of primary branches (15.03 plant-1), number of secondary branches (83.40 plant-1), plant spread (1793 cm2 plant-1), fresh weight (376.29 g plant-1), dry weight (103.54 g plant-1) and number of leaves plant-1((298.8). The same treatment (T5) had recorded the highest values with respect to crop growth rate (1.44 gm-2d-1), chlorophyll-a (1.40 mg g-1), chlorophyll-b (0.076 mg g-1) and total chlorophyll contents (1.48 mg g-1) in the leaves.

scholarly journals Leaf area index of potato (Solanum tuberosum L.) crop under three nitrogen fertilization treatments

2017 ◽  
Vol 35 (2) ◽  
pp. 171-175 ◽  
Author(s):  
Pedro Manuel Villa ◽  
Lina Sarmiento ◽  
Fermín José Rada ◽  
Daniel Machado ◽  
Alice Cristina Rodrigues
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Nitrogen Fertilization ◽  
Growth Parameters ◽  
Solanum Tuberosum L ◽  
Potato Crop ◽  
Block Design ◽  
Growth And Yield ◽  
Phenological Stages ◽  
Area Index

Nitrogen fertilization has considerable effects on growth and yield of potato crop. Leaf expansion is one of the most important growth parameters that can be used to optimize nitrogen fertilization management in agroecological practices. We evaluated the effect of nitrogen fertilization on the leaf area index (LAI) of potato crop during different phenological stages by two different methods. Experimental plots were established in a randomized block design with the following treatments: no nitrogen supply (0-N), 133 kg N ha-1 (133-N), and 400 kg N ha-1 (400-N), using the Granola variety, at the Andes region, Merida city, Venezuela. We measured leaf area at the main phenological stages of the crop using a plant canopy analyzer. LAI showed significant differences among treatments and phenological stages, except during the emergence stage. The maximum LAI values were obtained 55 days after emergence: 400-N (1.42±0.16) > 133-N (0.92±0.21) > 0-N (0.34±0.08). Nitrogen fertilization had a significant effect on the development of LAI in potato crop along its different phenological stages.

scholarly journals Influence of Farmyard Manure and Jeevamrutha on Growth and Yield of Sunflower

2021 ◽  
pp. 135-141
Author(s):  
M. Chaithra ◽  
G. M. Sujith
Keyword(s):  
Leaf Area ◽  
Seed Yield ◽  
Growth Parameters ◽  
Sandy Loam ◽  
Block Design ◽  
Farmyard Manure ◽  
Growth And Yield ◽  
Area Index ◽  
Yield Attributes ◽  
Loam Soil

A field experiment was conducted during Kharif 2017 at ZARS, University of Agricultural Sciences, Bengaluru to study the influence of different levels of Farm Yard Manure (FYM) and Jeevamrutha on growth and yield of Sunflower in red sandy loam soil. There were nine treatment combinations laid out in factorial randomized complete block design, which were replicated thrice. The experimental results revealed that, the application of FYM at 150 per cent nitrogen equivalent and jeevamrutha at 1500 L ha-1significantly influenced growth parameters like plant height, number of leaves, leaf area, leaf area index and total dry matter production. The interaction effect of FYM and jeevamrutha was significant in enhancing the seed yield of sunflower due to improvement in yield attributes like head diameter, number of seeds per head, hundred seed weight and seed yield per plant.

Effects of planting configuration and row spacing on growth and production of potato under mulched condition in Dadeldhura, Nepal

2019 ◽  
Vol 2 (1) ◽  
pp. 282-300
Author(s):  
Roshan Dhakal ◽  
Binod Joshi ◽  
Santosh Bharati ◽  
Shiva Chandra Dhakal ◽  
Khem Raj Joshi
Keyword(s):  
Leaf Area ◽  
Growth Parameters ◽  
Block Design ◽  
Tuber Number ◽  
Row Spacing ◽  
Index Number ◽  
Double Row ◽  
Area Index ◽  
Weight Growth ◽  
Significant Difference

An experiment was conducted at the research site of Dadeldhura, Nepal in 2019 to identify optimum plant spacing for potato under mulched condition. Three levels of inter row spacing; 60 cm with single row per bed (1RB), 45 cm with double row per bed (2RB) and 30 cm with triple row per bed (3RB) and intra row spacing (20, 30 and 40 cm) were laid out in factorial randomized complete block design with three replications. Results showed that there was significant difference (p<0.05) for all parameters except on days to 50% germination, 90% flowering, 50% maturity and on main stem number and graded large sized tuber number and it's weight. Growth parameters namely canopy, leaf number and leaf area were significantly higher (p<0.05) in 60 cm (1RB) ×30 cm spacing. Plant height and leaf area index was significantly higher (p<0.05) in 60 cm (1RB) × 20 cm and 30(3RB) ×20 cm spacing respectively. Total number of tubers m-2 , weight of tubers  m-2, weight of marketable tubers m-2, harvest index, number of small sized tuber m-2 ,weight of small sized tubers m-2 and weight of medium sized tubers m-2 were found to be 56.24%,39.79%, 47.98%,4.41%,90.56%, 113.23% and 70.15% significantly higher (p<0.05)  in 30 cm (3RB) compared to 60 cm on (1RB) inter row spacing respectively and 59.72%, 61.15%, 58.30%, 4.41%, 114.90%, 137.31%, 55.39% higher in 20cm compared to 40 cm intra row spacing. Interaction effect was significant (p<0.05)  in marketable tuber number and medium sized tuber number in which the average highest number of marketable tubers (134.44) and medium sized tubers (121.08) was found in 30(3RB) ×20 cm spacing which was 165.95% and 235.03% significantly higher compared to  60×40 cm spacing respectively. So, this study showed that 30(3RB) ×20 cm spacing would be best spacing combination under mulched condition.

scholarly journals Effect of nodumax inoculant on morpho-physiological parameters, nutrient content and yield of soybean (Glycine max. L)

2021 ◽  
Vol 18 (2) ◽  
pp. 54-72
Author(s):  
H.C. Ogbuehi
Keyword(s):  
Glycine Max ◽  
Nutritional Status ◽  
Leaf Area ◽  
Growth Parameters ◽  
Block Design ◽  
Gum Arabic ◽  
Nutrient Content ◽  
Physiological Parameters ◽  
Powdered Milk ◽  
Area Index

The field study was carried out at the Teaching and Research Farm of Faculty of Agriculture and Veterinary Medicine of Imo State University, Owerri, to investigate the effect of Nodumax inoculants on Morpho-Pysiological parameters, Nutrient content and yield of Soybean (Glycine max). The experimental design was Randomized Complete Block Design with five treatments and four replications. Treatments consist of Gum Arabic Slurry, Honey Slurry, Powdered milk Slurry, Sugar Slurry ( as adhesive agents) and control. The results obtained indicated that Nodumax inoculation, with adhesive agents especially Gum Arabic improved the Morpho- Physiological parameters such as plant heights, leaf area, leaf area index, leaf area ratio, Relative Growth Rate (RGR) and Net Assimilation Rate (NAR) and shoot dry weight compare to the control. Inoculation increased soybean grain yield across the various adhesive agents ranging from 909.45kg/ha for non-inoculated control to 1002.99kg/ha for inoculated using Gum Arabic, as sticker agent. Proximate composition of inoculated seeds was significantly (P<0.05) improved compare to the control. However, it was observed that Nodumax inoculation correspond to increase in soybean growth characteristics which subsequently increased the yield and improved the nutritional status of soybean. This study has shown that the type of adhesive for coating of seed during rhizobium inoculation could impact positive change in growth parameters, Nutritional status and yield of soybean.

scholarly journals EFFECT OF FREQUENCY OF HARVEST PLANT POPULATION AND N.P.K FERTILIZER ON THE GROWTH PERFORMANCE OF VERNONIA AMYGDALINA

2021 ◽  
Vol 9 (08) ◽  
pp. 921-928
Author(s):  
Patience T.K. ◽  
◽  
Nwachukwu V.C. ◽  
Inchikida B.M. ◽  
Danjuma N. ◽  
...  
Keyword(s):  
Leaf Area ◽  
Dry Matter ◽  
Growth Parameters ◽  
Block Design ◽  
Plant Population ◽  
Vernonia Amygdalina ◽  
Area Index ◽  
Harvest Data ◽  
Number Of Leaves ◽  
One Year

The trial aimed at assessing the effect of frequency of harvest, plant population and N.P.K fertilizer of Vernonia amygdalina(Bitter leaf) was conducted at the Teaching and Research farm, University of Abuja, Nigeria. Split plot treatment arrangement fitted into a randomized complete Block Design (RCBD) with 3 replications was used. Plant population used were10,000,stands/ha and 40,000 stands/ha and 4 weeks frequency of harvest. Data collected were Numbers of branches/plants Number of leaves /plants, Height/plant, leaf area index and dry matter/unit.The result of the study showed that the number of branches per plant in the plots that received N.P.K fertilizer was greater than those in the control plots. Leaf area per plant was drastically reduced in the control plots compared with those in plots that were treated with N.P.K 200kg and 400kg/ha were not significant.Frequency of harvest has significant effect on the leaf on the leaf area and dry matter weight of the plants. Stands planted at the spacing 1m(10,000 stands/ha) developed more in all the growth parameters than others one year after establishment.

scholarly journals Growth and yield of wheat at different dates of sowing under chrland ecosystem of Bangladesh

2017 ◽  
Vol 14 (2) ◽  
pp. 147-154 ◽  
Author(s):  
MM Kamrozzaman ◽  
MAH Khan ◽  
S Ahmed ◽  
N Sultana
Keyword(s):  
Growth Rate ◽  
Leaf Area Index ◽  
Leaf Area ◽  
Dry Matter ◽  
Block Design ◽  
Grain Filling ◽  
Crop Growth ◽  
Growth And Yield ◽  
Area Index ◽  
Crop Growth Rate

An experiment was conducted at Sadipur charland under Farming System Research and Development Site, Hatgobindapur, Faridpur, during rabi season of 2012-13 and 2013-14 to study the growth and yield performance of cv. BARI Gom-24 as affected by different dates of sowing under Agro-ecological Zone-12 (AEZ-12) of Bangladesh. The experiment was laid out in randomized complete block design with six replications, comprising five different dates of sowing viz. November 5, November 15, November 25, December 5 and December 15. Results reveal that the tallest plant, leaf area index, total dry matter, and crop growth rate were observed in November 25 sown crop and leaf area index, total dry matter and crop growth rate were higher at booting, grain filling, and tillering stages of the crop. Maximum effective tillers hill-1 (3.49), spikes m-2, (311), number of grains spike-1 (42.20) and 1000-grain weight (52.10 g) were produced by November 25 sown crop exhibited the highest grain (4.30 t ha-1) and straw yield (4.94 t ha-1) as well as harvest index (46.88%) of the crop. Lowest performance was observed both in early (November 5) and late sown crop (December 15). The overall results indicated that November 25 sown crop showed better performance in respect of growth and yield of wheat under charland ecosystem of Bangladesh.J. Bangladesh Agril. Univ. 14(2): 147-154, December 2016

scholarly journals Growth and Yield of Shallot (Allium cepa L. Aggregatum group) with Application of Beneficial Microorganisms

2019 ◽  
Vol 3 (2) ◽  
pp. 66
Author(s):  
Taufiq Hidayat ◽  
Prapto Yudono ◽  
Endang Sulistyaningsih ◽  
Arif Wibowo
Keyword(s):  
Bacillus Thuringiensis ◽  
Leaf Area ◽  
Allium Cepa ◽  
Mycorrhizal Fungi ◽  
Block Design ◽  
Growth And Yield ◽  
Area Index ◽  
Beneficial Microorganisms ◽  
Trichoderma Sp ◽  
Allium Cepa L

Shallot (Allium cepa L. Aggregatum group) is one of the most widely utilized vegetables by Indonesian people. Some technologies have been adapted to improved shallot productivity. One of those are the application of beneficial microorganisms. We applied mycorrhizal fungi, Trichoderma sp., and Bacillus thuringiensis as well as the combination among these microorganisms were applied in Shallots cultivation and were investigated to improve the growth and development of shallot. A field experiment was arranged in a Randomized Complete Block Design with two treatment factors. The first factor consisted of two shallot cultivars, namely Biru Lancor and Crok Kuning; whilst the second factor consisted of six beneficial microorganism treatments, i.e. control, mycorrhizae, Trichoderma sp., Bacillus thuringiensis, the combination of mycorrhizae and Trichoderma sp., and the combination of those three microorganisms. The observation was conducted on infection percentage of mycorrhizae, total population of Trichoderma sp., leaf area, leaf area index, net assimilation rate, crop growth rate, harvest index, and plant yield. The data obtained were subjected to analysis of variance (ANOVA) and continued with Duncan’s Multiple Range Test (DMRT) at 5% significance level. The results showed the leaf area of shallot was improved as affected by the application of mycorrhizal fungi. The effectiveness and implication of mycorrhizal fungi on shallot growth would decrease if the application of was combined with other microorganisms. However, the application of beneficial microorganisms had not been able to increase component yield and yield of Biru Lancor and Crok Kuning, indicated by bulb weight, number of bulb, bulb diameter, number of bulb per cluster, and bulb yield per hectare.

scholarly journals Growth And Yield of Sorghum (Sorghum bicolor (L.) Moench) Varities in Sokoto Sudan Savanna of Nigeria

2021 ◽  
Vol 25 (8) ◽  
pp. 1513-1518
Author(s):  
A.S. Gunu ◽  
M. Musa
Keyword(s):  
Leaf Area ◽  
Block Design ◽  
Dry Weight ◽  
Growth And Yield ◽  
Area Index ◽  
Days To Heading ◽  
Number Of Leaves ◽  
Total Dry Weight ◽  
Sudan Savanna ◽  
Stalk Weight

Field trial was carried out during the 2019 rainy season (June to October) at the Dryland Teaching and Research Farm of the Faculty of Agriculture, Usmanu Danfodiyo University, Sokoto to determine the growth and yield of sorghum varieties in the study area. The treatments consisted of five (5) sorghum varieties (Samsorg 45, Samsorg 46, Janjari, Yartawa and Jardawa), the treatments were laid out in a Randomized Complete Block Design (RCBD) replicated three (3) times. Data were collected on the growth and yield of the crop. Janjari and Jardawa varieties were higher in plant height. Jardawa and Yartawa varieties were higher in number of leaves. Janjari and Yartawa varieties were higher in total dry weight. Janjari, Jardawa and Yartawa varieties were higher in harvest index. Yartawa variety was higher in leaf area, leaf area index and 1000-grain weight. Jardawa variety was higher in panicle length. Janjari variety was early in number of days to heading, flowering, and maturity and was higher in dry stalk weight. The grain yield (249 – 1506kg ha-1 ) was higher in Janjari and Yartawa varieties (1268 – 1506 kg ha-1). Based on the findings of this research, it could be concluded that Janjari and Yartawa varieties performed better than other varieties in the study area.

scholarly journals AVALIAÇÃO DE TRÊS MÉTODOS DE OBTENÇÃO DO ÍNDICE DE ÁREA FOLIAR PARA CULTURA DA SOJA

Nativa ◽  
2019 ◽  
Vol 7 (3) ◽  
pp. 284
Author(s):  
Ana Laura Pereira Souza ◽  
Marcelo Marques Costa ◽  
Darly Geraldo de Sena Junior ◽  
Rogério Borges de Oliveria Paz
Keyword(s):  
Leaf Area ◽  
Plant Density ◽  
Digital Images ◽  
Block Design ◽  
Linear Equations ◽  
Density Variation ◽  
Imaging Method ◽  
Area Index ◽  
Soybean Crop ◽  
Randomized Block Design

O Índice de área foliar (IAF) representa a eficiência na interceptação e utilização da radiação solar pelas plantas. O IAF pode ser obtido de forma direta, determinando-se a área foliar e área ocupada pela planta. Entretanto, métodos indiretos são comumente utilizados para sua estimativa devido a necessidade de praticidade. O objetivo deste trabalho foi avaliar a equivalência das estimativas do IAF obtidas por meio de um ceptômetro, pelo método de discos e utilizando imagens digitais. Para tanto, foi conduzido um experimento com a cultura da soja, no delineamento em blocos casualizados, com variação da densidade de plantas, para comparar os valores de IAF obtidos pelos diferentes métodos aos 34 dias após a semeadura (DAS). A comparação foi feita por meio dos coeficientes de equações lineares ajustadas entre os resultados obtidos. O método do disco e do ceptômetro, apresentaram uma boa equivalência entre seus valores. Entretanto, o método que utiliza imagens superestimou o IAF, não apresentando uma boa equivalência de seus valores aos do método de discos e ao ceptômetro.Palavras-chave: ceptômetro, discos foliares, imagens digitais. EVALUATION OF THREE OBTAINMENT METHODS OF FOLIAR AREA INDEX FOR SOYBEAN CROP ABSTRACT:The leaf area index (LAI) represents the interception efficiency and use of solar radiation by plants. IAF can be obtained directly, determining the leaf area and area occupied by the plant. However, indirect methods are commonly used for their estimation because for practicality. The objective of this work was to evaluate the equivalence of the LAI estimates obtained with a ceptometer, using the disc method and digital images. A experiment was conducted with soybean crop, in a randomized block design with plant density variation to compare the LAI values obtained by the different methods at 34 days after sowing (DAS). The comparison was made through the coefficients of linear equations adjusted between the results obtained. The disc and the ceptometer method presented a good equivalence between their values. However, the imaging method overestimated the LAI, not presenting a good equivalence of its values to those of the disc method and the ceptometer.Keywords: ceptometer, leaf discs, digital images.

Sign in / Sign up

Export Citation Format

Share Document