scholarly journals Response surface methodology assessment of osmotic pre-drying and convective dehydration processes on the anti-oxidant property of Hausa variety of tomato

2019 ◽  
Vol 11 (2) ◽  
pp. 187-194 ◽  
Author(s):  
Obafemi Ibitayo Obajemihi ◽  
Daniel Oluwasegun Dikko ◽  
Adeola Akorede Asipa ◽  
Kayode Muritala Salawu ◽  
Timothy Denen Akpenpuun ◽  
...  
Keyword(s):  
Vitamin C ◽  
Goodness Of Fit ◽  
Desirability Function ◽  
Process Conditions ◽  
Osmotic Concentration ◽  
Drying Time ◽  
Significance Level ◽  
Tomato Product ◽  
Uniform Diameter ◽  
Honey Solution

This study was conducted to determine the effect of osmotic pre-drying treatment on the vitamin C content of Hausa variety of tomato. The tomatoes used were sliced to a uniform diameter of 10 mm, deseeded and then osmotically pre-treated with sugar and honey solution at different osmotic concentrations (20, 30, 40, 50, 60 °Bx), osmotic time (10, 20, 30, 40 and 50 min) and osmotic temperature (10, 20, 30, 40, 50 °C). Experimental design was done using the Central Composite Design (CCD) methodology of Design Expert software version 6.0.6. Drying of the samples was done at 65 °C in a cabinet dryer operating mainly on convectional heat transfer. Drying process was completed and terminated when the samples reached their equilibrium moisture content between 3-5% after total drying time of 10 hours. The data obtained were analysed statistically using analysis of variance (ANOVA) and regression analysis at p≤0.05 significance level. The developed model was significant and has goodness of fit with an R2 value of 71.29% and lack of fit test was insignificant at p≤ 0.05. Optimized process conditions for producing the best quality of tomato product with vitamin C content of 22 mg/100 g were 35.43 °Bx osmotic concentration, 11.10 min osmotic time and 23.86 °C osmotic temperature having a desirability function of 1. These conditions were considered to be advantageous as they were more economical, time and energy saving.

STUDY ON WET PROCESSING OF BLOCK CHILLY

2013 ◽  
Vol 3 (1) ◽  
pp. 45-50
Author(s):  
Dwi Dian Praptanto ◽  
Kurnia Herlina Dewi ◽  
Bosman Sidebang
Keyword(s):  
Water Content ◽  
Production Method ◽  
Time Data ◽  
Time Duration ◽  
Drying Time ◽  
Significance Level ◽  
Randomized Design ◽  
Wet Processing ◽  
Analysis Application ◽  
Lower Water Content

The purpose of this study is to examine the effect of drying time in weight and water content, combination effect of drying time and size of the material, and consumer acceptance to the product in the wet processing of chili blocks production. Method used in the research is completely randomized design (CRD) with two factorials are material size and drying time. Data were analyzed using ANOVA and further analysis using DMRT at 5% significance level. Organoleptic test result was analyzed using the Kruskal-Wallis and Tukey test for further analysis. Application of the equal drying time to two different size of material: rough and finest block chili, showed the result that water content of the rough block chili is lower than the finest block chilli. Application of the different drying time duration to the same size of chili showed the lower water content with increasing duration of drying time. The water content of the material tends to decrease with increasing duration of drying time. The level of consumer’s preferences to the product of wet processing of chili blocks production is equal for scents, but it’s different for color, texture and overall preferences.

scholarly journals PEMANFAATAN EKSTRAK BELIMBING WULUH DAN EKSTRAK KULIT BUAH NAGA DALAM PEMBUATAN SELAI

2021 ◽  
Vol 8 (2) ◽  
pp. 62
Author(s):  
Nurul Aini ◽  
Dody Handito ◽  
Siska Cicilia
Keyword(s):  
Antioxidant Activity ◽  
Vitamin C ◽  
Block Design ◽  
Fruit Peel ◽  
Significance Level ◽  
Randomized Block Design ◽  
Dragon Fruit ◽  
Significant Difference ◽  
Sensory Tests

This study aims to determine the concentration of starfruit juice and dragon fruit peel on the quality of jam. The experimental design used was a one-factor Randomized Block Design (RAK) with six treatments and three replications to obtain 18 samples. The treatments were the concentration of starfruit juice and dragon fruit peel extract with P1 (100% : 0%), P2 (85% : 15%), P3 (70% : 15%), P4 (55% : 45%), P5 ( 40% : 60%) and P6 (25% : 75%). Parameters observed were vitamin C levels, antioxidant activity, spread, and color as well as sensory tests (color, aroma, and taste). Data analysis results were tested by analysis of variance at a significance level of 5% using Co-Stat software. If there is a significant difference, then the orthogonal polynomial further test is carried out, while the physical and sensory tests are further tested using the Honest Significant Difference test at a significance level of 5%. The results showed that the concentration of star fruit juice and dragon fruit pulp did not have a different effect on vitamin C levels but had a significantly different effect on antioxidant activity, spread, and color. P6 treatment resulted in the highest antioxidant activity of 77.27%, 12.80 mg of vitamin C content, 10.1 cm of smearing power, and sensory properties that were acceptable to the panelists.

scholarly journals Optimization of the blanching of potato (Solanum tuberosum L) slices by response surface methodology: Effect on the vitamin C content and drying kinetics

2020 ◽  
pp. 17-32
Author(s):  
Ambe Desmond ◽  
Lobe Elias ◽  
Divine B. Nde
Keyword(s):  
Vitamin C ◽  
Solanum Tuberosum L ◽  
Negative Influence ◽  
Drying Kinetics ◽  
Slice Thickness ◽  
Drying Time ◽  
Quality Marker ◽  
Thin Layer Drying ◽  
Drying Behavior ◽  
Potato Slices

Potatoes (S. tuberosum L) is one of the most important tuber crops in the world. However, its high moisture content and inadequate storage and processing techniques have a negative influence on its quality and availability throughout the year. This work was carried out to optimize the blanching behavior and drying kinetics of potato slices. Fresh potato slices (5, 10 and 15 mm) were blanched at 70, 80 and 90°C for 1, 3 and 5 min following a 3k level full factorial design. The loss in Vitamin C was used as a quality marker for the optimization process. The influence of blanching on the drying behavior of potato slices was carried out at 50, 60 and 70°C. Results showed that blanching parameters had a significant (P < 0.05) effect on vitamin C loss. Optimum blanching conditions were blanching temperature of 80oC, blanching time of 3 min and a slice thickness of 10 mm which gave an average loss in Vitamin C of about 2.6%. Drying data were successfully fitted to three different thin layer drying models. The use of blanching as a pretreatment before the drying of potato is recommended because it reduces the drying time by 30%.

scholarly journals The influence of ethanol on the convective drying and on the nutritional quality of dekopon slices

2018 ◽  
Author(s):  
Ronaldo Elias de Mello-Júnior ◽  
Nathane Silva Resende ◽  
Jefferson Luiz Gomes Corrêa ◽  
Leila Aparecida Salles Pio ◽  
Elisângela Elena Nunes Carvalho
Keyword(s):  
Antioxidant Activity ◽  
Phenolic Compounds ◽  
Vitamin C ◽  
Nutritional Quality ◽  
Quality Parameters ◽  
Nutritional Composition ◽  
Convective Drying ◽  
Total Phenolic ◽  
Drying Time ◽  
Citrus Reticulate

Dekopon or Hallabong (Citrus reticulate “Shiranui”) is a hybrid fruit that belongs to the citrus fruits. The scientific and commercial interests in dekopon is due to its nutritional composition. The objective of the study was to verify the influence of ethanol as a pretreatment in reducing drying time as well as maintaining nutritional quality (vitamin C, total phenolic compounds, and antioxidant activity) of dekopon slices. The drying with ethanol at 70 °C promoted the greatest reduction in drying time, but the processed pretreated samples at 50 °C presented the highest level of nutritional quality parameters. Keywords: drying time; vitamin C; phenolic compounds; antioxidant activity 

scholarly journals Evaluation of Process Conditions for Ultrasonic Spray-Freeze Drying of Transglutaminase

2020 ◽  
Vol 58 (1) ◽  
pp. 38-48
Author(s):  
Hilal Isleroglu ◽  
Izzet Turker
Keyword(s):  
Enzyme Activity ◽  
Flow Rate ◽  
Freeze Drying ◽  
Desirability Function ◽  
Spherical Particles ◽  
Optimum Process ◽  
Process Conditions ◽  
Plate Temperature ◽  
Ultrasonic Spray ◽  
Spray Freeze Drying

In this study, a commercial transglutaminase enzyme was dried using an ultrasonic spray freeze drying method and the effects of the process conditions were optimized to maximize the final transglutaminase activity. Accordingly, process parameters affecting enzyme activity were selected, such as nozzle frequency (48 and 120 kHz), flow rate (2, 5 and 8 mL/min) and plate temperature for secondary drying (25, 35 and 45 °C). Moreover, the effects of different pH values (pH=2.0 and 9.0) and high temperature (80 °C) on enzyme activity, physical properties and particle morphology of transglutaminase were discussed. According to the results, transglutaminase preserved its activity despite ultrasonic spray freeze drying. Sonication enhanced the enzyme activity. Using the desirability function method, the optimum process conditions were determined to be flow rate 3.10 mL/min, plate temperature 45 °C and nozzle frequency 120 kHz. The predicted activity ratio was 1.17, and experimentally obtained ratio was 1.14±0.02. Furthermore, enzyme produced by ultrasonic spray freeze drying had low moisture values (2.92-4.36 %) at 8 h of drying. When the morphological structure of the transglutaminase particles produced by ultrasonic spray freeze drying under the optimum conditions was examined, spherical particles with pores on their surfaces were observed. In addition, flow properties of the transglutaminase powders were considered as fair under most conditions according to the Carr index.

scholarly journals Köpük Kurutma Yöntemi ile Gıdaların Kurutulması

2017 ◽  
Vol 5 (6) ◽  
pp. 637
Author(s):  
Emine Varhan ◽  
Mehmet Koç
Keyword(s):  
Food Product ◽  
Process Conditions ◽  
Drying Methods ◽  
Powder Form ◽  
Drying Time ◽  
Foam Structure ◽  
Foaming Agents ◽  
Product Increase ◽  
Foam Drying ◽  
Drying Efficiency

The foam mat drying is one of drying methods applied to produce powdered food in the food industry. Foam mat drying, which is better than other methods of drying in terms of drying time and cost, is used to convert powder form of various foods such as fruit, milk and seafood. The formation of the foam structure is provided with foaming agents and/or stabilizers. The surface area and drying efficiency of food product increase with conversion to foam structure. In this review, knowledge about the process conditions applied during the process of converting the food into powder form by foam drying method, the obtained product properties and the applicability of foam mat drying to various foods are presented.

scholarly journals Development of Antioxidant and Nutritious Lentil (Lens culinaris) Flour Using Controlled Optimized Germination as a Bioprocess

Foods ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 2924
Author(s):  
Daniel Rico ◽  
Elena Peñas ◽  
María del Carmen García ◽  
Dilip K. Rai ◽  
Cristina Martínez-Villaluenga ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Ascorbic Acid ◽  
Phenolic Compounds ◽  
Phytic Acid ◽  
Desirability Function ◽  
Effect Of Temperature ◽  
Process Conditions ◽  
Phytic Acid Content ◽  
Rsm Optimization ◽  
Functional Features

Germination is an efficient and natural strategy that allows the modification of the nutritional value and the nutraceutical properties of seeds, enabling one to tailor the process according to its final use. This study aimed at optimization of germination conditions to produce novel lentil flours with improved nutritional and functional features. Response Surface Methodology (RSM) was applied to model the effect of temperature (15–27 °C) and time (1–5 days) on different nutritional and quality parameters of lentil flours including proximate composition, content and profile of fatty acids, content of phytic acid, ascorbic acid and γ-aminobutyric acid (GABA), content and profile of phenolic compounds, antioxidant activity, expected glycemic index (GI) and color during germination. As shown by RSM polynomial models, sprouting promoted the reduction of phytic acid content and enhanced the levels of ascorbic acid, GABA, insoluble phenolic compounds, antioxidant activity and expected GI, and modified the color of the resultant lentil flours. RSM optimization of germination temperature and time using desirability function revealed that the optimal process conditions to maximize the nutritional, bioactive and quality properties of sprouted lentil flours were 21 °C for 3.5 days.

scholarly journals EFFECT OF PROCUREMENT LIFECYCLE ON PERFORMANCE OF GOVERNMENT MINISTRIES IN KENYA

2019 ◽  
Vol 3 (2) ◽  
pp. 105
Author(s):  
Tom Mboya Okello ◽  
Dr. Allan Kihara
Keyword(s):  
Goodness Of Fit ◽  
Primary Data ◽  
P Value ◽  
Contract Management ◽  
Policy And Practice ◽  
Significance Level ◽  
Procurement Contract ◽  
The Government ◽  
Procurement Planning ◽  
The Way

Purpose: The purpose of the study was to establish the effect of procurement lifecycle on performance of government ministries in Kenya. The study specific objectives were to establish the effect of procurement planning on performance of Government Ministries in Kenya, to assess the effect of procurement contract award on performance of Government Ministries in Kenya and to determine the effect of procurement contract management on performance of Government Ministries in Kenya.  Methodology: The study used five theories to support the literature. The study theories were Principal-Agency Theory, the Institutional Theory, Stakeholder Theory and Resource based Theory. The study employed descriptive research design. The targeted population of this study were 18 government ministries. The researcher collected primary data using both open-ended and closed-ended questionnaires. The data presentation was done using tables from both descriptive and inferential statistics analysis. The study used the multiple regression analysis models to measure the relationship between independent and dependent variables and the significant of the study.Results: R Square (R2) indicated that 51.8% of the variation on performance of government ministries could be explained by the fitted model leaving out 41.9% of variation unexplained. This indicated the presence of other factors in the surrounding, relating to procurement lifecycle towards the performance of ministries in addition to the ones identified for the study. However, the model showed goodness of fit since the R Square was above 50%. The value of the F statistic (9.146) indicates that the overall regression model was significant at the significance level of 0.05. From the finding, the study established that Tender Qualification and Selection, Procurement Contract Management and Procurement Planning were significant to the study with their P-values less than the default alpha. Procurement Contract Award was insignificant to the study with its P-value being greater that the default alpha level of significant.Contribution to policy and practice: The study recommends the Government Ministries in Kenya to consider improving procurement contract award to their suppliers by improving on the way they prepare the solicitation document, receive and evaluate bids, conducts the cost analysis, award the bid as required by the act as well as the way procurement prepares the solicitation document for better performance in future.The Government ministries to reconsider its persistence in ensuring that the procurement team develops contract administration plan, receives goods and services from the suppliers, signs the invoices to facilitate supplier payment, manages the vendors, starts up the contract in due time as required and closes the contract when it ends. By so doing, they shall ease the way in which their operational performance is conducted. 

scholarly journals Production of protein powder from salted duck eggs white

2019 ◽  
Vol 02 ◽  
pp. 119-130
Author(s):  
Trinh A. Nguyen
Keyword(s):  
Design Method ◽  
Egg White ◽  
Regression Equation ◽  
Process Conditions ◽  
Drying Time ◽  
Process Yield ◽  
Surface Design ◽  
Duck Egg ◽  
Salted Duck Eggs

The objective of the research was to determine process conditions to produce protein powder from salted duck egg whites based on the two main steps including precipitation of the protein from egg white and drying the protein. Optimization for process parameters of protein's precipitation and drying were carried out by Response Surface Design method with the results obtained from the experiment. Basing on the determination of the limits of studied factors, defining the regression and choosing the optimal parameters for precipitation and drying processes. The result of optimal protein precipitation was the ratio of water/salted duck egg white: 3.5/1, the temperature of 80oC and precipitation time of 60 minutes with the process yield was 9.63% and the salt separation was 19.61%. The result of optimal drying process was the drying temperature at 75oC, material density: 0.35 g/cm2 (wind speed of 0.64 m/s and drying time of 4 h) with the product solubility of 11.05%, the water content of 8.19% and aw of 0,476. Verifying the defined regression equation and experiment showed the different level is less than 5%, the defined regression equation is valid and has the potential to apply in production.

Sign in / Sign up

Export Citation Format

Share Document