Optimization of fermentation conditions in Barbari bread based on mixed whole flour (barley and sprouted wheat) and sourdough

The purpose of this study was to use a mixture of whole wheat–barley flour mixture in the preparation of traditional Iranian bread (Barbari) in the optimum condition of fermentation to benefit from all available nutrients. In this study, bread parameters such as specific volume, porosity, textural characteristics, zinc, iron, phytic acid and organoleptic properties were investigated. In this research, different percentages of sourdough (15–30%) and fermentation time (30 – 120 min) were applied. Results showed that the phytic acid content significantly decreased ( p < 0.05) (0.23 – 0.14) by increasing sourdough and fermentation time, which result in increasing in zinc (17.49 – 22.89%) and iron (36.44 – 45.32%) content. Both the sourdough content and fermentation time parameters had a significant effect ( p < 0.05) on the better porosity (9.05 – 13.50%) and overall acceptability of bread (2.15 – 3.85). The hardness, gumminess, chewiness, porosity, phytic acid and overall acceptance parameters were used to optimize the fermentation conditions of Barbari bread by response surface methodology using a central composite design. Optimal conditions for the production of Barbari bread were 29.53% sourdough and 120 min fermentation time. Under optimal conditions, the overall acceptance, hardness, porosity, chewability, gumminess and phytic acid were 3.84, 60.81 N, 14.09%, 302.01 N/mm, 41.37 N and 0.15%, respectively.

Development of Antioxidant and Nutritious Lentil (Lens culinaris) Flour Using Controlled Optimized Germination as a Bioprocess

Germination is an efficient and natural strategy that allows the modification of the nutritional value and the nutraceutical properties of seeds, enabling one to tailor the process according to its final use. This study aimed at optimization of germination conditions to produce novel lentil flours with improved nutritional and functional features. Response Surface Methodology (RSM) was applied to model the effect of temperature (15–27 °C) and time (1–5 days) on different nutritional and quality parameters of lentil flours including proximate composition, content and profile of fatty acids, content of phytic acid, ascorbic acid and γ-aminobutyric acid (GABA), content and profile of phenolic compounds, antioxidant activity, expected glycemic index (GI) and color during germination. As shown by RSM polynomial models, sprouting promoted the reduction of phytic acid content and enhanced the levels of ascorbic acid, GABA, insoluble phenolic compounds, antioxidant activity and expected GI, and modified the color of the resultant lentil flours. RSM optimization of germination temperature and time using desirability function revealed that the optimal process conditions to maximize the nutritional, bioactive and quality properties of sprouted lentil flours were 21 °C for 3.5 days.

The Estimation of Iron, Zinc, Phytic Acid Contents and Their Molar Ratios in Different Types of Bread and Rice Consumed in Halabja City, Iraqi Kurdistan

A total of 10 samples involving five bread and five rice types and five cooked rice were selected. The iron and Zn contents were analyzed using an Inductively Coupled Plasma Mass Spectrophotometer (ICP-MS), and phytic acid content was analyzed using a rapid colorimetric method using a spectrophotometer. Phytic acid to Fe and Zn molar ratios were also determined using their molar weight to determine the potential bioavailability of selected nutrients. A one-way ANOVA test was used to statistically analyze the means differences between the phytate and mineral contents between the bread and rice samples. The variation of Fe and Zn (mg kg-1) in the bread samples was 24.1-65.6 and 13.3-22.8, in row rice was 10.8 to 45.3 and 8.66-17.4, and in cooked rice was 10.0-45.2 and 6.03-15.5 respectively. The PA concentration in (g 100g-1) was 0.77-1.14 for bread, 0.61-1.10 for row rice, and 0.31-0.77 for cooked rice. And also, PA/Fe and PA/Zn ratios were 2.58-6.01 and 8.07-13.4 for bread, 0.25-1.35, and 39.7-110 for row rice, and 0.11-0.89 and 23.0-125 for cooked rice, respectively. The results indicated that soaking and cooking processes caused the reduction in the Fe, Zn, and PA concentrations by 22.4, 5.54, and 27.7 %, respectively. These results from PA/Fe and PA/Zn molar ratios show that Fe had moderate bioavailability while Zn had low bioavailability. The results may be valuable for generate cultivars of wheat and rice varieties with suitable concentrations of PA and micronutrients, which can lead to the improvement of micronutrient-rich cultivars to reduce malnutrition.

Degradation of phytic acid from tithonia (Tithonia diversifolia) leaves using Lactobacillus bulgaricus at different fermentation times

Pazla R, Yanti G, Jamarun N, Arief, Elihasridas, Sucitra LS. 2021. Degradation of phytic acid from tithonia (Tithonia diversifolia) leaves using Lactobacillus bulgaricus at different fermentation times. Biodiversitas 22: 4794-4798. The aim of this study is to reduce high level of phytic acid in tithonia (Tithonia diversifolia) leaves by fermentation technique using Lactobacillus bulgaricus. A completely randomized design consisting of four treatments (fermentation time) i.e. T2: 2 days, T3: 3 days, T4: 4 days and T5: 5 days and experiment was performed in four replicates. The parameters measured were pH, phytase enzyme activity, total bacterial colony, phytic acid content, and phytic acid degradation. The results showed that the fermentation time had a significant effect (P<0.05) on pH, phytase enzyme activity, total bacterial colony, phytic acid content, and phytic acid degradation. The conclusion of this study is that on fifth day (Treatment T5) fermented tithonia leaves produced the lowest levels of phytic acid (3.48 mg/ 100g) with the highest level of degradation (64.81%).

Studying the influence of mungbean use on the structure-forming indicators of meat-plant systems based on veal, pork, chicken meat

This paper reports a study into the use of germinated mungbean as a promising raw material influencing the structure-forming indicators of meat systems during the production of meat-vegetable sausages. The content of iodine in the germinated mungbean and its anatomical parts has been examined using solutions of potassium iodide. A change in the phytic acid content and size of phytin globoloids has been established in mungbean malt depending on germination conditions. The influence of flour from germinated mungbean on the moisture-binding, moisture-retaining, fat-retaining abilities, as well as on the pH of meat systems based on veal meat, pork, chicken has been investigated. The reported set of studies is important as the defined patterns could make it possible to devise technologies for meat-vegetable sausages, to expand the range of enriched meat products. The result of this study has established that the degree of biotransformation of iodine into beans is influenced by the protein content in the native beans. Almost 90...95 % of iodine is accumulated in the cotyledons of beans in the protein fraction, 5...10 % ‒ in sprouts and roots. The rational range of potassium iodide concentrations in the germination solution is 76.5 g per 1,000 cm3, over 48 hours. Prolonging the germination time leads to microbiological damage to the bean mass. The germination process affects the reduction of phytic acid content, which is confirmed by a decrease in the diameter of phytin globoloids. It is rational to use in meat systems based on pork meat and veal meat 10 % of the developed flour by reducing meat raw materials. With this ratio of formulation ingredients, the maximum increase in the moisture-binding, moisture-retaining, and fat-retaining capacities of these meat systems is achieved. In the meat systems based on chicken meat, it is possible to increase a replacement part of up to 15 %. The reported set of studies is useful and important because it could form the basis for devising the technologies of meat-vegetable sausages to meet the needs of different segments of consumers

Nutritional Properties of Ogi Powder and Sensory Perception of Ogi Porridge Made From Synthetic Provitamin: A Maize Genotype

Provitamin-A maize (PVA) with increased carotenoid content obtained through conventional breeding techniques has been largely successful in sub-Saharan Africa. This resulted in a need to evaluate their susceptibility, retention, and nutritional content during processing into local foods. This study evaluated the chemical, carotenoid composition, and retention of PVA, the phytic acid content in ogi powder, and the sensory perception of ogi porridge produced traditionally from the three novel PVA maize genotypes (PVA SYN HGAC0 Maize 1; PVA SYN HGBC0 Maize 2; and PVA SYN HGBC1 Maize 3) and one yellow maize variety (control). Chemical composition analyses showed significant differences (p &lt; 0.05) in all parameters. The PVA ranged from 5.96 to 8.43 μg/g in Maize 2 and 3 before processing while the true percentage retention after processing into ogi powder ranged from 20.25 to 37.54% in Maize 1 and 2, respectively. In addition, there was a reduction in the phytate content of ogi powder, and Maize 2 contained the lowest (2.78 mg/g from 4.09 mg/g). Maize 2 genotype had the highest vitamin A contribution; it can meet 18.3% of the vitamin A requirements in children while in adult males and females (&gt;19 years), 6.2 and 7.7%, respectively. Sensory evaluation showed that the ogi 3 porridge (Maize 3) was the most acceptable, followed by Maize 2. In conclusion, Maize 2 had the highest PVA, true retention of carotenoid, vitamin A contributions, and the second most acceptable ogi porridge with the lowest phytate content.

Experimental Drillable Magnesium Phosphate Cement Is a Promising Alternative to Conventional Bone Cements

Clinically used mineral bone cements lack high strength values, absorbability and drillability. Therefore, magnesium phosphate cements have recently received increasing attention as they unify a high mechanical performance with presumed degradation in vivo. To obtain a drillable cement formulation, farringtonite (Mg3(PO4)2) and magnesium oxide (MgO) were modified with the setting retardant phytic acid (C6H18O24P6). In a pre-testing series, 13 different compositions of magnesium phosphate cements were analyzed concentrating on the clinical demands for application. Of these 13 composites, two cement formulations with different phytic acid content (22.5 wt% and 25 wt%) were identified to meet clinical demands. Both formulations were evaluated in terms of setting time, injectability, compressive strength, screw pullout tests and biomechanical tests in a clinically relevant fracture model. The cements were used as bone filler of a metaphyseal bone defect alone, and in combination with screws drilled through the cement. Both formulations achieved a setting time of 5 min 30 s and an injectability of 100%. Compressive strength was shown to be ~12–13 MPa and the overall displacement of the reduced fracture was <2 mm with and without screws. Maximum load until reduced fracture failure was ~2600 N for the cements only and ~3800 N for the combination with screws. Two new compositions of magnesium phosphate cements revealed high strength in clinically relevant biomechanical test set-ups and add clinically desired characteristics to its strength such as injectability and drillability.