Design and performance of Factual Time Internet of Things based Geographic Air Pollution Scrutinize System

2020 ◽  
Vol 48 (4) ◽  
pp. 03-04
Author(s):  
Igor Dellucci

In the most recent decade, altitude of contamination is dauntless in built-up zone. Because of this, the superiority debases step by step. Air contamination observing is significant idea to check the encompassing air is reasonable to inhalation by the individual or not. In light of expanding the passage pace of carbon fixation present noticeable all around builds which bring about the natural air gets dirtied. Today every person needs to live in the solid climate, they need to check whether the specific zone where they need to go is pretty much contaminated and as per this contamination level data they may pick their course fittingly. Because of this analysts are cantered around air contamination checking assistance of remote sensor organize. These sensor systems give the data of contamination level of the brought together worker utilizing web. This magazine proposed a dependable and minimal effort air contamination checking framework for creating nations. Sensor assortment information in the simple shape and send this computerized information to cloud worker and accumulate the information on cloud workers and afterward progressionof this information. Presently a day's portable are accessible to everybody on the off chance that it might conceivable to check the contamination level of every zone, it might assist them with choosing the other sound course. Different advances are utilized beforehand for checking the contamination level however exactness in the perusing of contamination level tradeoffs. The proposed contamination estimation framework shows minimal effort and better dependability when contrasted with other estimation gadgets that is appeared in reproduction and consequence.

Author(s):  
Daphna Oyserman

Everyone can imagine their future self, even very young children, and this future self is usually positive and education-linked. To make progress toward an aspired future or away from a feared future requires people to plan and take action. Unfortunately, most people often start too late and commit minimal effort to ineffective strategies that lead their attention elsewhere. As a result, their high hopes and earnest resolutions often fall short. In Pathways to Success Through Identity-Based Motivation Daphna Oyserman focuses on situational constraints and affordances that trigger or impede taking action. Focusing on when the future-self matters and how to reduce the shortfall between the self that one aspires to become and the outcomes that one actually attains, Oyserman introduces the reader to the core theoretical framework of identity-based motivation (IBM) theory. IBM theory is the prediction that people prefer to act in identity-congruent ways but that the identity-to-behavior link is opaque for a number of reasons (the future feels far away, difficulty of working on goals is misinterpreted, and strategies for attaining goals do not feel identity-congruent). Oyserman's book goes on to also include the stakes and how the importance of education comes into play as it improves the lives of the individual, their family, and their society. The framework of IBM theory and how to achieve it is broken down into three parts: how to translate identity-based motivation into a practical intervention, an outline of the intervention, and empirical evidence that it works. In addition, the book also includes an implementation manual and fidelity measures for educators utilizing this book to intervene for the improvement of academic outcomes.


Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 137
Author(s):  
Florian Schlosser ◽  
Heinrich Wiebe ◽  
Timothy G. Walmsley ◽  
Martin J. Atkins ◽  
Michael R. W. Walmsley ◽  
...  

Heat pumps are the key technology to decarbonise thermal processes by upgrading industrial surplus heat using renewable electricity. Existing insight-based integration methods refer to the idealised Grand Composite Curve requiring the full exploitation of heat recovery potential but leave the question of how to deal with technical or economic limitations unanswered. In this work, a novel Heat Pump Bridge Analysis (HPBA) is introduced for practically targeting technical and economic heat pump potential by applying Coefficient of Performance curves into the Modified Energy Transfer Diagram (METD). Removing cross-Pinch violations and operating heat exchangers at minimum approach temperatures by combined application of Bridge Analysis increases the heat recovery rate and reduce the temperature lift to be pumped at the same time. The insight-based METD allows the individual matching of heat surpluses and deficits of individual streams with the capabilities and performance of different market-available heat pump concepts. For an illustrative example, the presented modifications based on HPBA increase the economically viable share of the technical heat pump potential from 61% to 79%.


2021 ◽  
pp. 003329412110268
Author(s):  
Jaime Ballard ◽  
Adeya Richmond ◽  
Suzanne van den Hoogenhof ◽  
Lynne Borden ◽  
Daniel Francis Perkins

Background Multilevel data can be missing at the individual level or at a nested level, such as family, classroom, or program site. Increased knowledge of higher-level missing data is necessary to develop evaluation design and statistical methods to address it. Methods Participants included 9,514 individuals participating in 47 youth and family programs nationwide who completed multiple self-report measures before and after program participation. Data were marked as missing or not missing at the item, scale, and wave levels for both individuals and program sites. Results Site-level missing data represented a substantial portion of missing data, ranging from 0–46% of missing data at pre-test and 35–71% of missing data at post-test. Youth were the most likely to be missing data, although site-level data did not differ by the age of participants served. In this dataset youth had the most surveys to complete, so their missing data could be due to survey fatigue. Conclusions Much of the missing data for individuals can be explained by the site not administering those questions or scales. These results suggest a need for statistical methods that account for site-level missing data, and for research design methods to reduce the prevalence of site-level missing data or reduce its impact. Researchers can generate buy-in with sites during the community collaboration stage, assessing problematic items for revision or removal and need for ongoing site support, particularly at post-test. We recommend that researchers conducting multilevel data report the amount and mechanism of missing data at each level.


2011 ◽  
Vol 134 (1) ◽  
Author(s):  
Andreas Peters ◽  
Zoltán S. Spakovszky

Due to their inherent noise challenge and potential for significant reductions in fuel burn, counter-rotating propfans (CRPs) are currently being investigated as potential alternatives to high-bypass turbofan engines. This paper introduces an integrated noise and performance assessment methodology for advanced propfan powered aircraft configurations. The approach is based on first principles and combines a coupled aircraft and propulsion system mission and performance analysis tool with 3D unsteady, full-wheel CRP computational fluid dynamics computations and aeroacoustic simulations. Special emphasis is put on computing CRP noise due to interaction tones. The method is capable of dealing with parametric studies and exploring noise reduction technologies. An aircraft performance, weight and balance, and mission analysis was first conducted on a candidate CRP powered aircraft configuration. Guided by data available in the literature, a detailed aerodynamic design of a pusher CRP was carried out. Full-wheel unsteady 3D Reynolds-averaged Navier-Stokes (RANS) simulations were then used to determine the time varying blade surface pressures and unsteady flow features necessary to define the acoustic source terms. A frequency domain approach based on Goldstein’s formulation of the acoustic analogy for moving media and Hanson’s single rotor noise method was extended to counter-rotating configurations. The far field noise predictions were compared to measured data of a similar CRP configuration and demonstrated good agreement between the computed and measured interaction tones. The underlying noise mechanisms have previously been described in literature but, to the authors’ knowledge, this is the first time that the individual contributions of front-rotor wake interaction, aft-rotor upstream influence, hub-endwall secondary flows, and front-rotor tip-vortices to interaction tone noise are dissected and quantified. Based on this investigation, the CRP was redesigned for reduced noise incorporating a clipped rear-rotor and increased rotor-rotor spacing to reduce upstream influence, tip-vortex, and wake interaction effects. Maintaining the thrust and propulsive efficiency at takeoff conditions, the noise was calculated for both designs. At the interaction tone frequencies, the redesigned CRP demonstrated an average reduction of 7.25 dB in mean sound pressure level computed over the forward and aft polar angle arcs. On the engine/aircraft system level, the redesigned CRP demonstrated a reduction of 9.2 dB in effective perceived noise (EPNdB) and 8.6 EPNdB at the Federal Aviation Regulations (FAR) 36 flyover and sideline observer locations, respectively. The results suggest that advanced open rotor designs can possibly meet Stage 4 noise requirements.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Pericles Ramón Mejía-Vásquez ◽  
Roberto Sánchez-Gómez ◽  
Sheila Serafim da Silva ◽  
Luis Vázquez-Suárez

PurposeThis research seeks to discover how the organisational form (franchising vs vertical integration) of 384 fashion stores belonging to a Spanish franchise chain influences unit-level performance measured through three key indicators commonly used in the retail literature: sales per square metre, sales per employee and service quality scores.Design/methodology/approachThe authors have analysed this research question using bivariate and multivariate analyses, with a panel dataset that includes quarterly establishment-level data covering the period from January 2018 to December 2019.FindingsThe aggregated data initially reveal weaker outcomes among franchised establishments. However, after controlling for other variables related to the fashion stores and their local markets, the authors have found that franchised establishments record higher sales both per square metre and per employee than vertically integrated stores. The findings also reveal that franchised establishments record lower service quality scores than their company-owned counterparts.Originality/valueNothing has been published on the differences between franchising and company ownership in terms of establishment-level performance in fashion retailing.


2017 ◽  
Vol 20 (1-2) ◽  
pp. 8-16 ◽  
Author(s):  
Emma Nilsson ◽  
Kerstin Nilsson

An increasing number of older people in the population will bring new challenges for the society and care coordination. One of the most important questions in care coordination is the employees’ work performance. The overall aim of this study was to examine care employees’ experience of factors that rule how they allocate their time and tasks in the care work. The study was qualitative and consists of focus group interviews with 36 employees in elderly care in five Swedish municipalities. Much of the work that care employees perform is controlled by others in the municipality organised health care. The employees had a limited possibility to decide what should be given priority in their work. However, the employees who participated in the focus group interviews did not want to prioritise tasks and duties they felt were faulty or in direct conflict with their own convictions. When employees experienced that the assistance assessments were correct and helpful to the individual elderly patient this contributed to the employees’ priority and performance of the task. The formal and informal control systems caused the employees’ priority to be mainly quantitative and visible work tasks, rather than more qualitative tasks and care giving to the elderly. In the intention to organise good care coordination that fit each elderly patients’ need it is important that those who work closest to the patient to a greater extent are given the opportunity to make their voice heard in decisions of care planning and assistance assessments.


Author(s):  
Peter Peeling ◽  
Linda M. Castell ◽  
Wim Derave ◽  
Olivier de Hon ◽  
Louise M. Burke

Athletes are exposed to numerous nutritional products, attractively marketed with claims of optimizing health, function, and performance. However, there is limited evidence to support many of these claims, and the efficacy and safety of many products is questionable. The variety of nutritional aids considered for use by track-and-field athletes includes sports foods, performance supplements, and therapeutic nutritional aids. Support for sports foods and five evidence-based performance supplements (caffeine, creatine, nitrate/beetroot juice, β-alanine, and bicarbonate) varies according to the event, the specific scenario of use, and the individual athlete’s goals and responsiveness. Specific challenges include developing protocols to manage repeated use of performance supplements in multievent or heat-final competitions or the interaction between several products which are used concurrently. Potential disadvantages of supplement use include expense, false expectancy, and the risk of ingesting banned substances sometimes present as contaminants. However, a pragmatic approach to the decision-making process for supplement use is recommended. The authors conclude that it is pertinent for sports foods and nutritional supplements to be considered only where a strong evidence base supports their use as safe, legal, and effective and that such supplements are trialed thoroughly by the individual before committing to use in a competition setting.


2016 ◽  
Vol 54 (4) ◽  
pp. 517-534 ◽  
Author(s):  
Aleksandra Anđelković ◽  
Marija Radosavljević ◽  
Danijela Stošić

Abstract The acceptance of lean philosophy in the company means not only respecting the lean principles in the manufacturing but in all the processes that are performed inside the company. All processes in the company that are a potential places for making losses and waste and thus require the application of lean principles. Among others, warehouse and warehouse operations, as a centre of costs and waste, must be supported through the implementation of lean philosophy in the company by respecting lean principles. The implementation of lean principles in the warehouse is a certain step of improvement warehouse process and performance, but also of the whole company. In that sense, the paper presents the analysis of the warehousing process and its performances before and after implementation of the lean tools in a selected Serbian company as a practical example. In addition, research shows which parts of warehousing need to be improved, in analysed company, as well as correlation between the individual parts of warehousing, according to employees' opinion from next sectors: purchasing, production and logistics.


2018 ◽  
Vol 13 (2) ◽  
Author(s):  
Naji J. Touma ◽  
Darren T. Beiko ◽  
Andrew E. MacNeily ◽  
Michael J. Leveridge

Introduction: Many factors impact the performance of graduating residents on certification exams. It is thought that most factors are related to the individual candidate’s ability, motivation, and work ethic. Less understood, however, is whether a training program has any impact on the preparation and performance of its graduates on certification exams. We present 20 years of results of a national preparatory exam that all graduating residents complete about three months before the Royal College of Physicians and Surgeons of Canada (RCPSC) qualifying urology exam. This exam, known colloquially as QUEST, aims to simulate the RCPSC exam with written and oral components. We aimed to analyze the impact of a training program on the performance of its residents. Methods: A retrospective review of exam results from 1997–2016 was conducted. During that time, 495 candidates from all 12 Canadian urology training programs undertook the exam. The performance of graduating residents from each individual program was grouped together for any given year. The different programs were anonymized, as the aim of this study is to assess the impact of a training program and not to rate the different programs. Statistical analysis using one-way ANOVA was conducted. Results: All training programs fall within one standard deviation of the mean for the written component, the oral component, and the overall score. The residents of four training programs had statistically better scores than the overall mean of the written component. The residents of three out of these four training programs also had statistically better scores than the overall mean of the oral component and the overall results of the exam. Conclusions: Most Canadian training programs prepare their residents adequately for this simulated certification exam in urology. However, there are some training programs that consistently prepare graduating residents to outperform their peers.


Sign in / Sign up

Export Citation Format

Share Document