scholarly journals ECOLOGICAL ASSESSMENT OF THE POWER LINE WOOD POLES PRODUCTION PROCESS

2001 ◽  
Vol 1 ◽  
pp. 94
Author(s):  
Ziedonis Miklaševičs
Keyword(s):  
Process Control ◽  
Production Process ◽  
Technological Process ◽  
Ecological Assessment ◽  
Power Line ◽  
Technological Scheme ◽  
Power Lines ◽  
Environmental Aspects ◽  
Hazard Estimate

For maintenance of the technological process, control and ecological assesment it is necessary to perform an estimate of environmental aspects that could have a sensible impact to environment. Environmental aspects and its impact is analyzed in the report. In the report is developed: 1. Friendly to environment technological scheme for production of wood poles for power lines. 2. Principial scheme and models o f hazard estimate 3. Hazard charts for the environmental defence 4. Algorithm of estimate of ecological for the environment That depends o f the problem’s topicality and enumeration of the hazard factors the specific problems solutions are offered that allow to controlthe manyfacturing process from the view of allowance need related to environmental defence.

scholarly journals ESTIMATION OF STRUCTURAL SIMILARITY FOR CONTROL OF MICROELECTRONIC PRODUCTS

2019 ◽  
Vol 1 (7) ◽  
pp. 14-18
Author(s):  
Yu. A. Gusman ◽  
Yu. A. Pichugin ◽  
A. O. Smirnov
Keyword(s):  
Production Process ◽  
Technological Process ◽  
Good Reason ◽  
Structural Similarity ◽  
Fixed Number ◽  
Crystal Plate ◽  
Technological Scheme ◽  
Real Sample ◽  
Numerical Example

In this paper we consider the technological process of manufacturing micromechanical gyroscopes, the output of which is divided into cells of the crystal plate and each cell contains a fixed number of product elements. The estimation of structural similarity for measurements of technical characteristics of various devices is offered. A relatively large value of structural similarity assessment means that there is a dependence of the quality of the manufactured devices on the position on the crystal plate. This gives a good reason for further work to improve the quality of the process or to change the technological scheme as a whole. The article considers a numerical example based on a real sample of microelectronic products. The proposed method can be used both in the process of adjustment of the production process and in the rejection of products, when further configuration of the equipment is no longer possible.

scholarly journals DETERMINATION OF RISK FACTORS FOR THE POWER LINE POLES PRODUCTION PROCESS

2001 ◽  
Vol 1 ◽  
pp. 85
Author(s):  
Ziedonis Miklaševičs
Keyword(s):  
Risk Factors ◽  
Production Process ◽  
Technological Process ◽  
Manufacturing Process ◽  
Power Line ◽  
Ecological Hazard

Today is necessary to solve many tasks related to manufacturing. It is necessary to perform activities in the environmental area. This process is related by management o f the activities o f products or service that impact the environment. The manufacturing process of wood poles is connected with possibility o f the environmental emergency because high toxic and reactive substances are used in the technology. The objective o f the report is to determine the factors of the technological process related to ecological hazard. The initiator events of emergency that are related to maintenance of technological machinery are analysed in the report. For analyses ofpossible machinery damages the methods o f hazard analyses are offered. Calculation are offered for possible emergency analyse, the methods of hazard analyses are offered and the effectiveness of specific methods related to problems of environmental defensive are analysed in the report.

scholarly journals Modeling the reliability of electrical power lines of the seaport in conditions forced electricity consumption

2021 ◽  
pp. 121-127
Author(s):  
А.П. Лицкевич ◽  
С.А. Лицкевич ◽  
О.Н. Лицкевич
Keyword(s):  
Mathematical Model ◽  
Technological Process ◽  
Operating Time ◽  
Electricity Consumption ◽  
Arbitrary Point ◽  
Power Line ◽  
Operating Conditions ◽  
Power Lines ◽  
Power Cable ◽  
Cable Line

В работе рассматривается задача оценки времени наработки силовой кабельной линии морского порта, с учетом форсирования технологического процесса в морском порту (погрузочно-разгрузочных работ) и, в связи с этим, повышения величины токовой нагрузки в силовой линии, превышающей допустимый предел, что ведет к повреждению линии. Для оценки влияния форсированного технологического процесса, на наработку силовых линий, вводятся основные факторы влияния: время длительности форсированного режима; величина тока в линии; температура окружающей среды. С их помощью вводится функция сокращающегося временного ресурса наработки силовой линии, которая отображает повреждения в силовой линии. Общая математическая модель наработки силовой кабельной линии включает повреждения в кабельной линии как основной фактор. Решение задач осуществляется с помощь разработанных программных средств и применения нечеткой математики, в среде Mathcad. Представленная математическая модель позволяет количественно оценить время наработки при использовании форсированных технологических режимов и повышенного потребления энергии, а также оценить степень снижения времени наработки, в результате суммарного действия повреждающих факторов, для произвольного момента времени в условиях эксплуатации. The paper considers the problem of estimating the operating time of the power, cable line of the seaport, taking into account the acceleration of the technological process in the seaport (loading and unloading operations) and, in this regard, the increase in the current load in the power line exceeding the permissible limit, which leads to damage lines. To assess the influence of the forced technological process on the operating time of the power lines, the main factors of influence are introduced: the duration of the forced mode; line current value; ambient temperature. With their help, the function of reducing the time resource of the operating time of the power line is introduced, which displays the damage in the power line). The general mathematical model of the power cable line operating time includes damage in the cable line as the main factor. The solution of problems is carried out with the help of the developed software and the use of fuzzy mathematics, in the Mathcad environment. The presented mathematical model makes it possible to quantitatively evaluate the operating time when using forced technological modes and increased energy consumption, as well as to assess the degree of reduction in the operating time, as a result of the total action of damaging factors, for an arbitrary point in time under operating conditions.

МODERNIZATION TECHNOLOGY REPAIRING ACENTRIFUGAL WATER PUMP

2018 ◽  
pp. 48-51
Author(s):  
Sh.U. Yuldashev ◽  
D.T. Abdumuminova
Keyword(s):  
Production Process ◽  
Technological Process ◽  
Energy Efficient ◽  
Technical Support ◽  
Ultrasonic Processing ◽  
Water Pump ◽  
The Real ◽  
Technological Processes ◽  
Efficient Management ◽  
Pump Shaft

The article provides an overview of the principle of the pump D630-90, as well as methods for studying the real conditions of technical support to improve maintainability and optimize technological processes and systems. A technological process for the restoration of the shaft of a centrifugal water pump has been developed and an algorithm for managing it has been proposed, on the basis of which the system for energy-efficient management of the recovery area has been implemented. Also in the article some questions of use, metal-filled compound SK812, and also application of ultrasonic processing of a surface of a shaft of the centrifugal water pump of mark D630-90 are mentioned and considered. The developed technological process of pump shaft restoration showed that it is characterized by simplicity, it fits well into the production process of repair and can be widely used in repair shops.

scholarly journals Comparison of Screening Configurations for the Mitigation of Voltages and Currents Induced on Pipelines by HVAC Power Lines

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3855
Author(s):  
Arturo Popoli ◽  
Leonardo Sandrolini ◽  
Andrea Cristofolini
Keyword(s):  
Finite Element Analysis ◽  
Cross Sections ◽  
Detrimental Effect ◽  
Power Line ◽  
Skin Depth ◽  
Power Lines ◽  
Element Analysis ◽  
3D Finite Element ◽  
Different Shapes ◽  
High Magnetic Permeability

In this paper, a strategy for reducing the electromagnetic interferences induced by power lines on metallic pipelines is proposed and numerically investigated. The study considers a set of steel conductors interposed between the power line and the pipeline. Different shapes of conductor cross sections and different magnetic permeabilities are considered, to identify the solution exhibiting the greatest mitigation efficiency for the same amount of material. The investigation is carried out by means of a quasi-3D finite element analysis. Results show that the main mechanism responsible for the mitigation is constituted by the currents induced in the screening conductors by the power line. Hence, a high magnetic permeability can have a detrimental effect since it reduces the skin depth to values below the size of the screening conductor. In this case, a reduction of the screening current and in the mitigation efficiency is observed. Nevertheless, the study shows that the use of strip-shaped screening conductors allows the employment of cheaper magnetic materials without compromising the mitigation efficacy of the screening conductors.

“These Power Lines Make Me Ill”: A Typology of Residents’ Health Responses to a New High-Voltage Power Line

Risk Analysis ◽  
2017 ◽  
Vol 37 (12) ◽  
pp. 2276-2288 ◽  
Author(s):  
Jarry T. Porsius ◽  
Liesbeth Claassen ◽  
Fred Woudenberg ◽  
Tjabe Smid ◽  
Danielle R. M. Timmermans
Keyword(s):  
High Voltage ◽  
Power Line ◽  
Power Lines

scholarly journals Dynamic Line Rating—An Effective Method to Increase the Safety of Power Lines

2021 ◽  
Vol 11 (2) ◽  
pp. 492
Author(s):  
Levente Rácz ◽  
Bálint Németh
Keyword(s):  
Expert System ◽  
Electric Field ◽  
High Voltage ◽  
Low Frequency ◽  
Power Line ◽  
Power Lines ◽  
Design Parameters ◽  
Monitoring Methods ◽  
Limit Value ◽  
Potential Applications

Exceeding the electric field’s limit value is not allowed in the vicinity of high-voltage power lines because of both legal and safety aspects. The design parameters of the line must be chosen so that such cases do not occur. However, analysis of several operating power lines in Europe found that the electric field strength in many cases exceeds the legally prescribed limit for the general public. To illustrate this issue and its importance, field measurement and finite element simulation results of the low-frequency electric field are presented for an active 400 kV power line. The purpose of this paper is to offer a new, economical expert system based on dynamic line rating (DLR) that utilizes the potential of real-time power line monitoring methods. The article describes the expert system’s strengths and benefits from both technical and financial points of view, highlighting DLR’s potential for application. With our proposed expert system, it is possible to increase a power line’s safety and security by ensuring that the electric field does not exceed its limit value. In this way, the authors demonstrate that DLR has other potential applications in addition to its capacity-increasing effect in the high voltage grid.

Development of technology for processing of chip wastes made of Al—Mg—Sc system alloy using hot extrusion method

2021 ◽  
pp. 123-129
Author(s):  
N.N. Zagirov ◽  
Yu.N. Loginov ◽  
E.V. Ivanov ◽  
V.G. Kuz’min
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Production Process ◽  
Liquid State ◽  
Hot Extrusion ◽  
Technological Scheme ◽  
System Alloy ◽  
Chip Processing ◽  
Extrusion Method

The problem of chip processing of aluminum alloy containing scandium is considered. The difficulty of remelting due to easy oxidation of the alloy components is noted. It is proposed to dispose of the shavings without transferring the metal to liquid state. The aim of the work is to construct technological scheme for the processing of waste chips of the Al—Mg—Sc alloy formed as result of machining cast billets by cutting. Results of experiments including cold briquetting, hot extrusion and drawing are presented. The mechanical properties of the product obtained according to several variants of the technological scheme are measured. The possibility of continuous drawing of semi-finished product is shown. The conclusion is made about the possibility of using the scheme in the production process.

scholarly journals Power line routing and configuration as major drivers of collision risk in two bustard species

Oryx ◽  
2020 ◽  
pp. 1-10 ◽  
Author(s):  
Ana Teresa Marques ◽  
Ricardo C. Martins ◽  
João Paulo Silva ◽  
Jorge M. Palmeirim ◽  
Francisco Moreira
Keyword(s):  
Abiotic Factors ◽  
Bird Species ◽  
Power Line ◽  
Power Lines ◽  
Mitigation Measures ◽  
Suitable Habitat ◽  
Collision Risk ◽  
Great Bustard ◽  
Line Configuration ◽  
Tetrax Tetrax

Abstract Collision with power lines is a major cause of mortality for many bird species. Understanding the biotic and abiotic factors that increase collision risk is therefore important for implementing mitigation measures to minimize mortality, such as power line rerouting or wire marking. Here, we used collision events registered during 2003–2015 along 280 km of transmission power lines in southern Portugal to analyse spatio-temporal patterns and collision risk factors in two sympatric, threatened, and collision-prone species: the great bustard Otis tarda and the little bustard Tetrax tetrax. The occurrence of collisions was not uniform across space and time, and variations could be explained by the species' ecological requirements, distribution patterns and behaviour. Although both species fly considerable distances between areas of suitable habitat, collisions were far more likely in power line sections with > 20% (for the little bustard) or > 50% (for the great bustard) of open farmland habitat in the surroundings. Power line configuration was also important: taller pylons and those with a higher number of wire levels posed a higher risk for both species. Wire marking had a small but significant effect for the little bustard, reducing collisions risk. There was, however, no similar effect for the great bustard, possibly a result of limited data. Mitigation measures should be implemented to prevent bustard collisions, including adequate route planning, ideally avoiding areas with > 20% of open habitat. Line configuration and wire marking are particularly important where such localities cannot be avoided and power lines cross areas with a high proportion of bustard habitat, including outside protected areas.

Sign in / Sign up

Export Citation Format

Share Document