scholarly journals Simulation and Style Design of Bridge Stability Supported on Large Diameter Piles

2021 ◽  
Vol 8 (6) ◽  
pp. 961-966
Author(s):  
Hussein Yousif Aziz ◽  
Hussein Kareem Sultan ◽  
Basim Jabbar Abbas
Keyword(s):  
Large Diameter ◽  
Suspension Bridge ◽  
Impact Loads ◽  
Analysis And Design ◽  
The Difference ◽  
The Stability ◽  
In The Beginning

In this paper, two types of bridges were taken to carry out the analysis and design according to the AASHTO Code and the SAP2000 program, in the beginning, work is done using AASHTO Code and both bridges are designed and analyzed, the first one was the suspension bridge and the second was a bridge supported in the pier region only. The two models, 16 piles with a diameter of 3.8 m were carried out on each pier. After that, the two models are analyzed and designed according to the SAP2000 program to calculate moment, shear and deflection for both bridges. So that the two models are compared based on torque, shear, impact loads and deflection to find out which one of the two models is more suitable for use in a long girder span. The comparison between the AASHTO Code and the SAP2000 program is also made based on the loading to show its effect on the stability design. The AASHTO code and the SAP2000 program are the most appropriate when analyzing and designing for two models. There is a slight difference in moment where the proportions were approximately (6-9)%. As for shear for both methods, the values for the suspension bridge were greater than those of the supported bridge. The difference was about (27-26)%.

Constraint Analysis on the Steel Mid Tower of a Tri Tower Suspension Bridge

2010 ◽  
Vol 163-167 ◽  
pp. 79-84
Author(s):  
Qiu Zhao ◽  
Chen Xu
Keyword(s):  
Suspension Bridge ◽  
Horizontal Displacement ◽  
Internal Force ◽  
Spring Stiffness ◽  
Fem Model ◽  
Stability Performance ◽  
The Difference ◽  
The Stability ◽  
Main Girder

A certain project of tri-tower suspension bridge of which the main span was 1080m was taken as a case study of the mid tower stability. A 3D beam FEM model has been carried out to investigate the global mechanical behavior of the bridge in which the internal force response to several different typical load cases were specifically concerned. Moreover, the cable spring stiffness to the mid tower was defined as the ratio of the initial horizontal forces acting on the top end of mid tower to the corresponding horizontal displacement. And the effect of this equivalent spring stiffness on the stability performance of the mid tower was compared to other tow constraint conditions to the tower including free constraint and pin constraint. The comparison showed that the cable equivalent stiffness was 4342kN/m when living load was acting along the whole main girder of the bridge while this value varied with different load cases. The difference between the effect caused by the cable spring stiffness and the free constraint was small indicating that the stability of the mid tower was not sensitive to the cable constraint. In addition, with the increase of the equivalent spring stiffness, the longitudinal buckling eigenvalue also became larger and gradually approached the condition of pin constraint.

Use of a Lyophilized Reference Plasma to Compare Coagulation Test Procedures

1975 ◽  
Vol 34 (02) ◽  
pp. 426-444 ◽  
Author(s):  
J Kahan ◽  
I Nohén
Keyword(s):  
Oral Anticoagulant Therapy ◽  
Repeated Measurements ◽  
Test Procedures ◽  
Coagulation Activity ◽  
Close Relationship ◽  
Measured Activity ◽  
Test Materials ◽  
The Difference ◽  
The Stability ◽  
The One

SummaryIn 4 collaborative trials, involving a varying number of hospital laboratories in the Stockholm area, the coagulation activity of different test materials was estimated with the one-stage prothrombin tests routinely used in the laboratories, viz. Normotest, Simplastin-A and Thrombotest. The test materials included different batches of a lyophilized reference plasma, deep-frozen specimens of diluted and undiluted normal plasmas, and fresh and deep-frozen specimens from patients on long-term oral anticoagulant therapy.Although a close relationship was found between different methods, Simplastin-A gave consistently lower values than Normotest, the difference being proportional to the estimated activity. The discrepancy was of about the same magnitude on all the test materials, and was probably due to a divergence between the manufacturers’ procedures used to set “normal percentage activity”, as well as to a varying ratio of measured activity to plasma concentration. The extent of discrepancy may vary with the batch-to-batch variation of thromboplastin reagents.The close agreement between results obtained on different test materials suggests that the investigated reference plasma could be used to calibrate the examined thromboplastin reagents, and to compare the degree of hypocoagulability estimated by the examined PIVKA-insensitive thromboplastin reagents.The assigned coagulation activity of different batches of the reference plasma agreed closely with experimentally obtained values. The stability of supplied batches was satisfactory as judged from the reproducibility of repeated measurements. The variability of test procedures was approximately the same on different test materials.

ANALISIS KESTABILAN LERENG DINDING AKHIR DI PIT BARATLAUT PADA PENAMBANGAN BATUBARA DI PT. PUTERA BARA MITRA , KECAMATAN MENTEWE, KALIMANTAN SELATAN

KURVATEK ◽  
2018 ◽  
Vol 3 (1) ◽  
pp. 21-34
Author(s):  
Untung Wahyudi ◽  
Excelsior T P ◽  
Luthfi Wahyudi
Keyword(s):  
Slope Stability ◽  
Mining Operation ◽  
Subsurface Water ◽  
Mining System ◽  
Mine Site ◽  
Analysis And Design ◽  
The Stability ◽  
End Wall ◽  
Wall Slope ◽  
Mining Slope

PT. Putera Bara Mitra used open mining system for mining operation, Yet the completion of study on the end wall slope stability that  undertaken by geotechnical PT. Putera Bara Mitra in Northwest Pit and the occured a failure in the low wall on the 1st June 2012 led to the need for analysis and design the overall slope at the mine site. To analyze and design the overall slope, used value of the recommended minimum safety. The value was based on company for single slope SF ≥ 1.2 and SF ≥ 1.3 for overall slope. The calculation used Bichop method with the help of software slide v 5.0. Geometry improvements was done at the low slopes that originally single wall with a 30 m bench height and a slope 70° with SF = 0.781, into 4 levels with SF = 1.305. The analysis explained the factors that affect the stability of the low wall included the mining slope geometry, unfavorable drainase system, material stockpiles and seismicity factors. It was necessary to do prevention efforts to maintain the stability of the slope included the redesign to slope geometry, handling surface and subsurface water in a way to control slopes draining groundwater, vegetation stabilization using and monitoring slope using Total Station with Prism and Crackmeter to determine the movement of cracks visible on the surface. 

In the stability of paints and varnishes for protective and decorative wood finish

2016 ◽  
Author(s):  
Ю.И. Цой
Keyword(s):  
Organic Solvents ◽  
Evaluation Criteria ◽  
Ternary Systems ◽  
Solubility Parameters ◽  
Formaldehyde Resin ◽  
Film Forming ◽  
The Difference ◽  
Molecular Forces ◽  
The Stability ◽  
Thermodynamic Interaction

Задача получения однородного состава ЛКМ сводится к правильному выбору пленкообразователей и соответствующих растворителей и, в случае необходимости, разбавителей и добавок. На основе положений теории растворимости была проведена оценка совместимости компонентов и стабильности таких систем. Критериями оценки были приняты параметры растворимости и термодинамического взаимодействия. Исследовали совместимость алкидных лаков с аминоформальдегидными смолами в бутаноле, и результаты этих исследований представлены в треугольной фазовой диаграмме. Для оценки совместимости смол по результатам расчета параметров термодинамического взаимодействия были построены спинодали для тройных систем. Как показывает анализ результатов проведенных исследований, даже при большой разности ?? = |?12 – ?13| = 0,2 наблюдается небольшая область несовместимости. С уменьшением разности ?? область несовместимости сужается. При ?23 > ?с область несовместимости расширяется как для ? = 0,2, так и для ?? = 0,1 и ?? = 0. Таким образом, для таких систем на совместимость компонентов, в первую очередь, влияет их взаимодействие между собой – чем оно больше, тем лучше они совместимы. Проведенные исследования показали, что парциальные параметры растворимости, учитывающие природу когезионных сил, более объективно характеризуют растворимость пленкообразующих смол в органических растворителях, чем их общий параметр растворимости. Растворимость пленкообразующих алкидных и этерифицированных аминоформальдегидных смол в органических растворителях обусловлена термодинамическим взаимодействием молекулярных сил различной природы. Стабильность смеси алкидной и этерифицированной аминоформальдегидной смолы в бутаноле обусловлена в большей степени термодинамическим взаимодействием молекулярных сил; при этом степень бутанолизации меламиноформальдегидной смолы оказывает наибольшее влияние на стабильность cистемы. Проведенные исследования по стабильности лакокрасочных смесей из различных пленкообразующих смол на основе рассмотренных критериев оценки могут быть использованы для совершенствования технологии защитно-декоративной отделки древесины. The problem of obtaining a homogeneous composition of the coatings is reduced to the proper selection of film-forming agents, and diluent and, if appropriate, diluents and additives. On the basis of the theory of solubility, we have carried out the assessment of the compatibility of the components and stability of such systems. The evaluation criteria were adopted the parameters of the solubility and thermodynamic interaction. Researched the compatibility with alkyd varnishes aminoformaldehyde resin in butanol, and the results of these studies are presented in the triangular phase diagram. To evaluate the compatibility of the resins according to the results of calculation of thermodynamic parameters of interaction were built spinodal for ternary systems. As the analysis of the results of the studies, even when the difference ??|?12 – ?13| = 0,2 there is a small area of incompatibility. With the decrease of the difference ? ? region incompatibility narrows. When ?23> ?с region incompatibility extends to ?? = 0,2, and for ?? = 0.1 and ?? = 0. Thus, for such systems, compatibility of components, primarily, affects their interaction with each other – the further away it is, the better they are compatible. Studies have shown that the partial solubility parameters, which take into account the nature of cohesive forces, more objectively characterize the solubility of film-forming resins in organic solvents than their total solubility parameter. The solubility and film-forming aminoformaldehyde esterified alkyd resins in organic solvents due to thermodynamic interaction of molecular forces of different nature. Тhe stability of the mixture and aminoformaldehyde esterified alkyd resin in butanol is generated largely by thermodynamic forces of molecular interaction; the degree of butanolate melamine-formaldehyde resin has the greatest effect on the stability of the system. Conducted research on the stability of the paint mixtures of various film-forming resins on the basis of the evaluation criteria can be used to improve the technology of protective and decorative wood finish.

Stability and mutual impact of perception of parental pressure and infants' social support – A study based on the difference between employment status and household income

2021 ◽  
pp. 002072092199705
Author(s):  
Yong Wang
Keyword(s):  
Household Income ◽  
Employment Status ◽  
Working Mothers ◽  
Social Research ◽  
Research Report ◽  
Parental Pressure ◽  
Income Levels ◽  
Significant Difference ◽  
The Difference ◽  
The Stability

The purpose of this study is to explore the stability and interaction between parental pressure and social research report, as well as the role of employment status and family income levels in this process. This study used a special study on Korean children (PSKC) 2–4 waves. Use t-test, correlation and autoregressive cross-delay modeling to analyze the data. The main findings of this study are: First, over time, parental pressure and mother’s social research report are consistent. Secondly, the pressure of motherhood and childcare has an obvious lagging effect on upbringing, and vice versa. Third, there is no significant difference between working mothers and non-working mothers in terms of the stability of working parents' pressure, social research report and social research report for children's pressure channels. However, parental pressure can only predict the social research report of working mothers. Fourth, there is no significant difference between the stability and interaction of these two structures in household income levels. In short, the results show that, over time, parental pressure is consistent with mother’s social research report. The results also show that there is a significant cross-lag effect between the mothers’ perceptions of mutual pressure analysis. In the process from parental pressure to social research report, I found the difference between working and non-working mothers. The advantage of this study is that the expected longitudinal design was adopted during infancy and the priority between the two structures can be considered. The results of this study can be used as a source of intervention plans to help parents withstand severe parenting pressure and lack of social research report.

scholarly journals Modeling and Analysis of BDS-2 and BDS-3 Combined Precise Time and Frequency Transfer Considering Stochastic Models of Inter-System Bias

2021 ◽  
Vol 13 (4) ◽  
pp. 793
Author(s):  
Guoqiang Jiao ◽  
Shuli Song ◽  
Qinming Chen ◽  
Chao Huang ◽  
Ke Su ◽  
...  
Keyword(s):  
Stochastic Models ◽  
Satellite System ◽  
Modeling And Analysis ◽  
System Bias ◽  
Frequency Transfer ◽  
Global Navigation ◽  
The Difference ◽  
The Stability ◽  
Global Navigation Satellite ◽  
Precise Time

BeiDou global navigation satellite system (BDS) began to provide positioning, navigation, and timing (PNT) services to global users officially on 31 July, 2020. BDS constellations consist of regional (BDS-2) and global navigation satellites (BDS-3). Due to the difference of modulations and characteristics for the BDS-2 and BDS-3 default civil service signals (B1I/B3I) and the increase of new signals (B1C/B2a) for BDS-3, a systemically bias exists in the receiver-end when receiving and processing BDS-2 and BDS-3 signals, which leads to the inter-system bias (ISB) between BDS-2 and BDS-3 on the receiver side. To fully utilize BDS, the BDS-2 and BDS-3 combined precise time and frequency transfer are investigated considering the effect of the ISB. Four kinds of ISB stochastic models are presented, which are ignoring ISB (ISBNO), estimating ISB as random constant (ISBCV), random walk process (ISBRW), and white noise process (ISBWN). The results demonstrate that the datum of receiver clock offsets can be unified and the ISB deduced datum confusion can be avoided by estimating the ISB. The ISBCV and ISBRW models are superior to ISBWN. For the BDS-2 and BDS-3 combined precise time and frequency transfer using ISBNO, ISBCV, ISBRW, and ISBWN, the stability of clock differences of old signals can be enhanced by 20.18%, 23.89%, 23.96%, and 11.46% over BDS-2-only, respectively. For new signals, the enhancements are −50.77%, 20.22%, 17.53%, and −3.69%, respectively. Moreover, ISBCV and ISBRW models have the better frequency transfer stability. Consequently, we recommended the optimal ISBCV or suboptimal ISBRW model for BDS-2 and BDS-3 combined precise time and frequency transfer when processing the old as well as the new signals.

scholarly journals Some remarks on the stability of the Cauchy equation and completeness

2021 ◽  
Author(s):  
Harald Fripertinger ◽  
Jens Schwaiger
Keyword(s):  
Normed Space ◽  
Additive Function ◽  
Functional Equations ◽  
Constant Function ◽  
Cauchy Equation ◽  
Cauchy Difference ◽  
International Conference ◽  
The Difference ◽  
The Stability ◽  
The Given

AbstractIt was proved in Forti and Schwaiger (C R Math Acad Sci Soc R Can 11(6):215–220, 1989), Schwaiger (Aequ Math 35:120–121, 1988) and with different methods in Schwaiger (Developments in functional equations and related topics. Selected papers based on the presentations at the 16th international conference on functional equations and inequalities, ICFEI, Bȩdlewo, Poland, May 17–23, 2015, Springer, Cham, pp 275–295, 2017) that under the assumption that every function defined on suitable abelian semigroups with values in a normed space such that the norm of its Cauchy difference is bounded by a constant (function) is close to some additive function, i.e., the norm of the difference between the given function and that additive function is also bounded by a constant, the normed space must necessarily be complete. By Schwaiger (Ann Math Sil 34:151–163, 2020) this is also true in the non-archimedean case. Here we discuss the situation when the bound is a suitable non-constant function.

The Effect of Electromagnetic Pulse Treatment on Thin – Wall Bearing Ferrules Dimensional Accuracy

2014 ◽  
Vol 887-888 ◽  
pp. 1328-1332
Author(s):  
Wang Biao Qiu ◽  
Wei Xing Chen
Keyword(s):  
Residual Stress ◽  
Electromagnetic Pulse ◽  
Optical Measurement ◽  
Dimensional Accuracy ◽  
Magnetic Treatment ◽  
Thin Wall ◽  
Pulse Treatment ◽  
The Difference ◽  
The Stability ◽  
Frequency Pulse

The article based on different frequency pulse equiponderance electromagnetic destressing comparison experiment, using vertical optical measurement to survey the changes of bearing ferrules size, study the difference between the effect of different frequency electromagnetic in removing residual stress, find the frequency of magnetic treatment pulse that help to maintain the stability of the thin-wall bearing collars' size, effectively improve the cycle of bearing ferrules process .

Measuring Surface Uniformity in Chemical Mechanical Polishing

2009 ◽  
Vol 76-78 ◽  
pp. 459-464
Author(s):  
Jae Won Baik ◽  
Chang Wook Kang
Keyword(s):  
Chemical Mechanical Polishing ◽  
Geometric Mean ◽  
Mechanical Polishing ◽  
Wafer Surface ◽  
Semiconductor Wafer ◽  
Statistical Process ◽  
Significant Step ◽  
The Difference ◽  
Thickness Variations ◽  
The Stability

Chemical mechanical polishing (CMP) is a technique used in semiconductor fabrication for planarizing the top surface of an in-process semiconductor wafer. Especially, Post-CMP thickness variations are known to have a severe impact on the stability of downstream processes and ultimately on device yield. Hence understanding how to quantify and characterize this non-uniformity is significant step towards statistical process control to achieve higher quality and enhanced productivity. The main reason is that the non-uniformed interface between the wafer and the machine-pad adversely affects the polishing performance and ultimate surface uniformity. The purpose of this paper is to suggest a new measure that estimates the uniformity of wafer surface considering the difference of the amount of abrasion between the center and the edge. This new measure which is called the Coefficient of Uniformity is defined as the following ratio: Geometric Mean (GM) / Arithmetic Mean (AM). This metric can be evaluated regionally to quantify the non-uniformity on the wafer surface from the center to the edge. Further simulations show that this new measure is insensitive to shift of the wafer center and sensitive to shift of the wafer edge. This trend indicates that this new measure is a very useful to test the non-uniformity of wafer after CMP polishing.

Dissipative instability of the MHD tangential discontinuity in magnetized plasmas with anisotropic viscosity and thermal conductivity

1996 ◽  
Vol 56 (2) ◽  
pp. 285-306 ◽  
Author(s):  
M. S. Ruderman ◽  
E. Verwichte ◽  
R. Erdélyi ◽  
M. Goossens
Keyword(s):  
Thermal Conductivity ◽  
Dispersion Equation ◽  
Viscosity Coefficient ◽  
Tangential Discontinuity ◽  
Stability Criteria ◽  
Threshold Velocity ◽  
Cold Plasmas ◽  
The Difference ◽  
The Stability ◽  
Anisotropic Viscosity

The stability of the MHD tangential discontinuity is studied in compressible plasmas in the presence of anisotropic viscosity and thermal conductivity. The general dispersion equation is derived, and solutions to this dispersion equation and stability criteria are obtained for the limiting cases of incompressible and cold plasmas. In these two limiting cases the effect of thermal conductivity vanishes, and the solutions are only influenced by viscosity. The stability criteria for viscous plasmas are compared with those for ideal plasmas, where stability is determined by the Kelvin—Helmholtz velocity VKH as a threshold for the difference in the equilibrium velocities. Viscosity turns out to have a destabilizing influence when the viscosity coefficient takes different values at the two sides of the discontinuity. Viscosity lowers the threshold velocity V below the ideal Kelvin—Helmholtz velocity VKH, so that there is a range of velocities between V and VKH where the overstability is of a dissipative nature.

Sign in / Sign up

Export Citation Format

Share Document