Man-Made Waste as a Raw Material Base for the Production of Modern Construction Composites

2019 ◽  
Vol 23 (7) ◽  
pp. 31-35
Author(s):  
M.S. Saydumov ◽  
S.-A.Y. Murtazaev ◽  
A.Kh. Alaskhanov ◽  
I.S. Dagin ◽  
M.R. Nakhayev
Keyword(s):  
Building Materials ◽  
Materials Science ◽  
Raw Materials ◽  
Construction Materials ◽  
Raw Material ◽  
Chemical Compositions ◽  
Material Base ◽  
Secondary Products ◽  
Natural Sand ◽  
Technogenic Raw Materials

The results of tests of secondary construction materials derived from man-made materials are presented. The granulometric and chemical compositions of secondary products from technogenic raw materials are investigated. The analysis of local natural and man-made raw materials base of the Chechen Republic. The possibilities of using local natural raw materials (crushed stone from gravel, natural sand, gravel, gypsum, cement, etc.) in the technology of building composite materials are shown. The suitability and efficiency of the use of technogenic raw materials in concrete and mortar technology, justified by the complex economic and environmental effect of its use in the practice of building materials science, have been experimentally proved. It has been established that with the introduction of advanced innovations in the field of concrete science it is possible to produce competitive products that are not inferior to foreign analogues.

scholarly journals Construction of affordable housing using local building materials

2020 ◽  
pp. 154-165
Author(s):  
V. V. Tytok
Keyword(s):  
Affordable Housing ◽  
Industrial Waste ◽  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Climatic Conditions ◽  
Raw Material ◽  
Material Base ◽  
Long Distance ◽  
The Cost

Trends in housing development should be based on the geographical location and climatic conditions of the region, national characteristics and culture, natural resources, transport links, density and living standards. Construction significantly affects the socio-economic development of the region. In this regard, increasing the sustainability of the regional construction complex, which is based on the building materials industry and the construction industry is a relevant and promising area of research.Demand in the building materials market continues to stimulate increased interest in the development of new types of efficient and inexpensive building materials. Since construction is one of the most material-intensive sectors of the economy, which consumes a large number of construction materials and products, various measures are taken to reduce their cost.In this regard, recently in the construction seek to make greater use of local building materials. This allows you to unload transport from long-distance transportation and significantly reduces the cost of construction. However, the building materials industry cannot develop by focusing only on natural sources of raw materials, as the costs of their extraction and processing are constantly growing. The use of man-made waste provides production with a rich source of cheap and often already prepared raw materials, which reduces the cost of manufacturing building materials.One of the promising areas in the construction of affordable housing is the maximum use of building materials and products that can be obtained from local raw materials and industrial waste. As local building materials are offered: clay, sand, soil, straw, reeds, flax. The use of industrial waste solves both environmental, fuel and energy problems and expands the raw material base of building materials.

scholarly journals PREPARING SOLUTIONS BASED ON INDUSTRIAL WASTE FOR FRACTURED SURFACE STRENGTHENING

2020 ◽  
Vol 5 (443) ◽  
pp. 13-20
Author(s):  
Aitkazinova Sh.A., ◽  
◽  
Bek А.А., ◽  
Derbisov K.T., ◽  
Donenbayeva N.S., ◽  
...  
Keyword(s):  
Fractured Rocks ◽  
Industrial Waste ◽  
Building Materials ◽  
Underground Mining ◽  
Raw Materials ◽  
Raw Material ◽  
Practical Significance ◽  
Material Base ◽  
Industrial Processing ◽  
Technogenic Raw Materials

Results of longstanding researches of Satbayev University scientists on the development of modified building materials to strengthen cracked mountain structures based on industrial waste are considered. Industrial processing of technogenic raw materials (enrichment and processing waste, overburden and enclosing rocks), which is similar in composition to natural and used in conventional trend, scarcely different from industrial processing of mineral raw materials. Creation of effective technologies for the processing of technogenic raw materials is an urgent task, which make it possible to obtain competitive products from it for various industries. Various methods of preparing solutions for strengthening of fractured rocks and building structures are analyzed. Research results of tailings of the Balkhash Mining and Metallurgical Combine and preparing solutions for strengthening fractured rocks and underground mining structures are presented. Rock mass strengthening in cracked areas is achieved by adding substances into the cracks, which after hardening and solidification with rocks, increase its shearing resistance characteristics. The most widespread hardening methods were cementation during mine workings (underground structures) in fractured rocks. Significance of obtained results for construction industry is in expansion and reproduction of raw material base of building materials industry through the use of Mining and metallurgical complex waste (tailings) and development of resource-saving technologies. Practical significance of work is in the detailed development of modified method for the production of building materials and products.

scholarly journals Problems and prospects of usage of secondary products of processing of natural phosphates for construction materials

2016 ◽  
Vol 4 ◽  
pp. 21-29
Author(s):  
Ilin A.P. ◽  
Kochetkov S.P. ◽  
Bryl S.V. ◽  
Rukhlin G.V.
Keyword(s):  
Building Materials ◽  
Classical Method ◽  
Raw Materials ◽  
Construction Materials ◽  
Road Construction ◽  
Total Output ◽  
Secondary Products ◽  
Apatite Concentrate ◽  
Technogenic Raw Materials ◽  
Phosphogypsum Waste

In the article the problems and prospects of using of secondary products of processing of natural phosphates for obtaining building materials. This technology for production of complex fertilizers is carried out on a Chemical enterprises in Russia: Veliky Novgorod, Dorogouge and Kirovo-Chepetsk. It is noted that from 1 ton of P2O5 of apatite it is produced of CaCO3 about 80 kg. Total output of manmade chalk if you use apatite concentrate represented 896 thousand ton and does not solve the problem of the shortfall of cement in Russia technogenic raw materials, in addition, all obtained in this process, liquid wastes and solid by-products are utilized within these companies without reference to the construction industry. To use the maximum amount of phosphogypsum waste produced by the best Perera-motivate on the spot in sulphuric acid, the who-rotated in the manufacturing associated with obtaining cement, sinter for road construction or lime (depending on the needs of the market). According to classical method on 1 ton of 100% sulfuric acid and 1 ton port lancement spent 2.05 ton hosphogypsum (in terms of dry dihydrate).

Serpentinite Magnesium Binders, Based on Technogenic Raw Materials

2021 ◽  
Vol 316 ◽  
pp. 1050-1054
Author(s):  
V.N. Zyryanova ◽  
E.V. Lytkina ◽  
A.P. Ochur-Ool
Keyword(s):  
Mechanical Strength ◽  
Water Resistance ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hardening Process ◽  
Dispersed System ◽  
Technogenic Raw Materials

Increasing water resistance and mechanical strength of hardening magnesian binders’ products can be achieved by introducing microfillings into a hardening dispersed system. It is shown that serpentine provides an increase strength and water resistance in hydration and hardening process, being as a structure-forming component, it intensifies this process. It allows expanding the raw material base for the production of magnesia binders for construction purposes.

Ceramic Composition Material with Mullite Crystals Obtained from the Clayy Raw Material of Yakutia

2020 ◽  
Vol 992 ◽  
pp. 253-258
Author(s):  
M.P. Lebedev ◽  
V.N. Tagrov ◽  
E.S. Lukin
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Practical Interest ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Strength Properties ◽  
Raw Material ◽  
Composition Material ◽  
Material Base ◽  
Wide Range

The article deals with the manufacture of modern structural ceramic materials from clay and loam deposits of the Republic of Sakha (Yakutia). The importance and relevance of the development of the production of building materials from local raw materials is emphasized, since this will certainly affect the effectiveness of the construction complex as a whole. The successful development of the construction complex is capable of not only stimulating growth in all sectors of the economy, but also contributes to solving the most pressing social problems. Today, Yakutia has huge reserves of mineral raw materials for the production of a wide range of building materials and products. Of practical interest are wall materials made from clay soils. Given the features of the region’s raw material base, this work focuses on additional processing of traditional material. Controlling the complex physicochemical and structural-mechanical transformations that occur during heat treatment, a methodology has been developed for creating a composite material that will allow competitive innovative materials with enhanced strength properties to be produced with a reinforcing element with a glassy phase matrix of mullite crystals. The fabricated samples have a wide range of physical and mechanical properties and allow using it as a high-quality structural building ceramics, as well as industrial floor technical tile.

Green gold of Africa – Can growing native bamboo in Ethiopia become a commercially viable business?

2014 ◽  
Vol 90 (05) ◽  
pp. 628-635 ◽  
Author(s):  
Felix Böck
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Wood Products ◽  
Raw Material ◽  
Sustainable Construction ◽  
Sustainable Business ◽  
Subtropical Zone ◽  
New Construction ◽  
Increasing Demand

With concerns about climate change and the search for sustainable construction materials, significant attention is now being paid to Africa's natural resources. Ethiopia, known as Africa's political capital, has a rapidly expanding economy with increasing demand for new construction materials. Through public private partnerships projects the country is developing a sustainable business model to promote bamboo as a raw material. The subtropical zone of Ethiopia is home to approximately 65% of Africa's bamboo resources, an area of over 1 million hectares. Bamboo is potentially an ideal source of local, sustainable purpose-engineered building materials for growing cities not only in Ethiopia but across Africa. Production of conventional construction materials such as steel and concrete is expensive, highly energy intensive and unsustainable, requiring large quantities of water and is strongly dependent on imported raw materials. Bamboo is a renewable building material widely cultivated in Ethiopia but not yet utilized in modern construction. Structural Bamboo Products (SBP), similar to engineered wood products, have excellent potential to partially replace the use of more energy-intensive materials. Projects such as African Bamboo are taking steps in managing, cultivating and using Ethiopian bamboo species to help mitigate rapid deforestation in East Africa by creating alternative “wood” sources and sustainable business opportunities.

scholarly journals Mixed magnesian binders using local silicate waste production

2021 ◽  
Vol 2131 (4) ◽  
pp. 042035
Author(s):  
E Lytkina
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Mining Industry ◽  
Raw Material ◽  
Similar Process ◽  
Environmental Aspect ◽  
Waste Production ◽  
Material Component ◽  
Additional Processing ◽  
Technogenic Raw Materials

Abstract Today, the waste of the mining industry is more than 8 billion tons. Analysis of the literature data showed that most of the man-made waste that is generated as a result of the development of mineral deposits is suitable for use in many industries, in particular, in the production of building materials. The use of technogenic raw materials allows us to solve the following tasks: Environmental aspect - reducing the number of dumps and reducing their volumes. And this, in turn, improves the ecology of regions and territories. 2. Economic aspect - reducing the cost of construction products through the use of almost free raw materials, the release of more competitive products. Of course, it is necessary to provide that part of the costs will be spent on additional processing, revision, activation, modification of this technogenic raw material component. But today we have to think about how to clear the territory of substandard “waste rock” and use it to reduce the production and consumption of natural raw materials. A similar process can create waste-free production.

scholarly journals Integrated use of technogenic raw materials in cement technology

2021 ◽  
pp. 19-24
Author(s):  
L.P. Chernyak ◽  
L.I. Melnyk ◽  
N.O. Dorogan ◽  
I.A. Goloukh
Keyword(s):  
Standardized Testing ◽  
Rice Husk ◽  
Power Plants ◽  
Raw Materials ◽  
Thermal Power ◽  
Raw Material ◽  
Cement Clinker ◽  
Material Base ◽  
Chemical Research ◽  
Technogenic Raw Materials

This work used a combination of modern physico-chemical research methods with standardized testing of technological and operational properties of raw materials, clinker, cement and compositions with its application. Results over of research of the silicate systems with rice husk and ash-fly as technogenic raw material for making of cement clinker are driven. The features of the chemical-mineralogical composition, phase transformations during burning and astringent properties of material at the use of 42,5-50,5 % industry wastes in composition initial raw material mixtures are shown. The object of the study were raw material mixtures for the production of Portland cement clinker based on the systems of chalk - clay - man-made raw materials and chalk - man-made raw materials. The possibility of replacing exhaustible and non-renewable natural raw materials with a complex of multi-tonnage wastes of agro-industry and heat energy, which meets the objectives of expanding the raw material base of cement production, resource conservation and environmental protection. Peculiarities of phase formation during firing of silicate systems of chalk-polymineral clay and chalk-technogenic raw materials taking into account changes in the quantitative ratio of components, in particular rice husk and ash-removal of thermal power plants are noted.

scholarly journals The use of screening of crushed granite stone for the production of building materials

2021 ◽  
Vol 340 ◽  
pp. 01004
Author(s):  
Fedor Gorbunov ◽  
Lilia Berdnikova ◽  
Victor Bulgakov ◽  
Alexandra Fadina ◽  
Andrey Lapin
Keyword(s):  
Compressive Strength ◽  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Processing Temperature ◽  
Crushed Granite ◽  
Liquid Products ◽  
Pore Liquid ◽  
Technogenic Raw Materials ◽  
Softening Coefficient

The possibility of using technogenic raw materials – the screening of crushed stone with the addition of cullet based on a silicate binder for the production of construction materials for structural purposes is studied. By varying the processing temperature, it was possible to increase the softening coefficient of the products and to achieve the pH neutrality of their pore liquid. Products processed at a temperature of 500700 °C have the following performance characteristics: the compressive strength 16.6-31.4 MPa, the bendingstrength 3.4-5.9 MPa.

scholarly journals Physicochemical, mineralogical and radiological properties of red mud samples as secondary raw materials

2017 ◽  
Vol 32 (3) ◽  
pp. 261-266 ◽  
Author(s):  
Snezana Nenadovic ◽  
Gabor Mucsi ◽  
Ljiljana Kljajevic ◽  
Miljana Mirkovic ◽  
Milos Nenadovic ◽  
...  
Keyword(s):  
Red Mud ◽  
Building Materials ◽  
Raw Materials ◽  
Preliminary Investigation ◽  
Construction Materials ◽  
Hazard Index ◽  
Raw Material ◽  
Radiation Hazard ◽  
Absorbed Dose Rate ◽  
Radium Equivalent Activity

The main goal of the presented research was the preliminary investigation of possibility of red mud - Hungarian dump sites Almasfuzito (sample A) and Ajka (sample B) - application as a pigment or as a raw material for use in the construction materials industry. Also, the aim of this work was the characterization of red mud as industrial waste generated by the Bayer process in the aluminum industry - which may cause environmental problems if appropriate treatment is not carried out. The main mineral phases of both red mud are hematite (Fe2O3), calcite (CaCO3), gibbsite (Al(OH)3) and they consists of particles of median particle size 2.1 mm (sample A) and 2.5 mm (sample B) and have a characteristic red color, which was the reason for its testing for use in the industry of building materials as a pigment for standard concrete mixtures. The radionuclides content in the samples was determined by gamma spectrometry, and the radiological hazards originating from 238U, 232Th, 40K in the samples, were assessed through the radium equivalent activity, and the external radiation hazard index. The absorbed dose rate and the annual effective dose were calculated in accordance with the UNSCEAR 2010 report and the results are presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document