Serpentinite Magnesium Binders, Based on Technogenic Raw Materials

2021 ◽  
Vol 316 ◽  
pp. 1050-1054
Author(s):  
V.N. Zyryanova ◽  
E.V. Lytkina ◽  
A.P. Ochur-Ool
Keyword(s):  
Mechanical Strength ◽  
Water Resistance ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hardening Process ◽  
Dispersed System ◽  
Technogenic Raw Materials

Increasing water resistance and mechanical strength of hardening magnesian binders’ products can be achieved by introducing microfillings into a hardening dispersed system. It is shown that serpentine provides an increase strength and water resistance in hydration and hardening process, being as a structure-forming component, it intensifies this process. It allows expanding the raw material base for the production of magnesia binders for construction purposes.

scholarly journals Integrated use of technogenic raw materials in cement technology

2021 ◽  
pp. 19-24
Author(s):  
L.P. Chernyak ◽  
L.I. Melnyk ◽  
N.O. Dorogan ◽  
I.A. Goloukh
Keyword(s):  
Standardized Testing ◽  
Rice Husk ◽  
Power Plants ◽  
Raw Materials ◽  
Thermal Power ◽  
Raw Material ◽  
Cement Clinker ◽  
Material Base ◽  
Chemical Research ◽  
Technogenic Raw Materials

This work used a combination of modern physico-chemical research methods with standardized testing of technological and operational properties of raw materials, clinker, cement and compositions with its application. Results over of research of the silicate systems with rice husk and ash-fly as technogenic raw material for making of cement clinker are driven. The features of the chemical-mineralogical composition, phase transformations during burning and astringent properties of material at the use of 42,5-50,5 % industry wastes in composition initial raw material mixtures are shown. The object of the study were raw material mixtures for the production of Portland cement clinker based on the systems of chalk - clay - man-made raw materials and chalk - man-made raw materials. The possibility of replacing exhaustible and non-renewable natural raw materials with a complex of multi-tonnage wastes of agro-industry and heat energy, which meets the objectives of expanding the raw material base of cement production, resource conservation and environmental protection. Peculiarities of phase formation during firing of silicate systems of chalk-polymineral clay and chalk-technogenic raw materials taking into account changes in the quantitative ratio of components, in particular rice husk and ash-removal of thermal power plants are noted.

scholarly journals PREPARING SOLUTIONS BASED ON INDUSTRIAL WASTE FOR FRACTURED SURFACE STRENGTHENING

2020 ◽  
Vol 5 (443) ◽  
pp. 13-20
Author(s):  
Aitkazinova Sh.A., ◽  
◽  
Bek А.А., ◽  
Derbisov K.T., ◽  
Donenbayeva N.S., ◽  
...  
Keyword(s):  
Fractured Rocks ◽  
Industrial Waste ◽  
Building Materials ◽  
Underground Mining ◽  
Raw Materials ◽  
Raw Material ◽  
Practical Significance ◽  
Material Base ◽  
Industrial Processing ◽  
Technogenic Raw Materials

Results of longstanding researches of Satbayev University scientists on the development of modified building materials to strengthen cracked mountain structures based on industrial waste are considered. Industrial processing of technogenic raw materials (enrichment and processing waste, overburden and enclosing rocks), which is similar in composition to natural and used in conventional trend, scarcely different from industrial processing of mineral raw materials. Creation of effective technologies for the processing of technogenic raw materials is an urgent task, which make it possible to obtain competitive products from it for various industries. Various methods of preparing solutions for strengthening of fractured rocks and building structures are analyzed. Research results of tailings of the Balkhash Mining and Metallurgical Combine and preparing solutions for strengthening fractured rocks and underground mining structures are presented. Rock mass strengthening in cracked areas is achieved by adding substances into the cracks, which after hardening and solidification with rocks, increase its shearing resistance characteristics. The most widespread hardening methods were cementation during mine workings (underground structures) in fractured rocks. Significance of obtained results for construction industry is in expansion and reproduction of raw material base of building materials industry through the use of Mining and metallurgical complex waste (tailings) and development of resource-saving technologies. Practical significance of work is in the detailed development of modified method for the production of building materials and products.

Man-Made Waste as a Raw Material Base for the Production of Modern Construction Composites

2019 ◽  
Vol 23 (7) ◽  
pp. 31-35
Author(s):  
M.S. Saydumov ◽  
S.-A.Y. Murtazaev ◽  
A.Kh. Alaskhanov ◽  
I.S. Dagin ◽  
M.R. Nakhayev
Keyword(s):  
Building Materials ◽  
Materials Science ◽  
Raw Materials ◽  
Construction Materials ◽  
Raw Material ◽  
Chemical Compositions ◽  
Material Base ◽  
Secondary Products ◽  
Natural Sand ◽  
Technogenic Raw Materials

The results of tests of secondary construction materials derived from man-made materials are presented. The granulometric and chemical compositions of secondary products from technogenic raw materials are investigated. The analysis of local natural and man-made raw materials base of the Chechen Republic. The possibilities of using local natural raw materials (crushed stone from gravel, natural sand, gravel, gypsum, cement, etc.) in the technology of building composite materials are shown. The suitability and efficiency of the use of technogenic raw materials in concrete and mortar technology, justified by the complex economic and environmental effect of its use in the practice of building materials science, have been experimentally proved. It has been established that with the introduction of advanced innovations in the field of concrete science it is possible to produce competitive products that are not inferior to foreign analogues.

The raw material base for the discovery of magnesium oxide production promising sources in the beneficiation processes

2021 ◽  
Vol 27 (3) ◽  
pp. 16-25
Author(s):  
А. Masalimov ◽  
◽  
А. Smirnov ◽  
N. Orekhova ◽  
I. Grishin ◽  
...  
Keyword(s):  
Magnesium Oxide ◽  
High Purity ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Oxide Production ◽  
Technogenic Raw Materials

The article contains the analyse of the raw material base of magnesia raw materials in Russia and its relationship with the existing deficit of high-purity magnesium oxide. Existing and promising sources of magnesia raw materials and their distribution by regions are considered in order to discover new sources that could be involved in the enrichment processes. The existing methods of enrichment of natural magnesites and the possibility of their application for technogenic raw materials are analyzed

Adjustment of a technology of cast iron smelting in the blast furnace of jsc "ural steel" w ith a volume of 1232 см3 with charge h a v in g 95% share of Mikhailovskii GOK pellets

2021 ◽  
Vol 77 (7) ◽  
pp. 768-775
Author(s):  
I. F. Iskakov ◽  
G. A. Kunitsyn ◽  
D. V. Lazarev ◽  
А. А. Red`kin ◽  
S. A. Trubitsyn ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Iron Ore ◽  
Raw Materials ◽  
Raw Material ◽  
Material Base ◽  
Hot Metal ◽  
Charging System ◽  
Iron Smelting ◽  
Gas Consumption ◽  
A Charge

To use effectively internal raw material base, JSC “Ural Steel” accomplished I category major overhaul of the blast furnace No. 2. The main purpose of the overhaul was to design a rational profile which could ensure an ability to operate with a charge containing 95 % of Mikhailovskii GOK (mining and concentrating plant) pellets having basicity of 0.5 by CaO/SiO2. The blast furnace No. 2 having useful volume of 1232 m3, was constructed by design of Danieli Corus, the Netherlands, and was blown in on December 30, 2020. In the process of guarantee tests, step-by-step increase of Mikhailovskii GOK pellets (Fetotal = 60.5 %, CaO/SiO2 = 0.5) content in the charge iron ore part was being accomplished from 55 to 95.1%. Charging of the blend containing pellets in the amount of 55% of iron ore part, was done by charging system 4OOCC + 1COOCC (Ore - Coke) with filling level 1.5 m. Under conditions of pellets part increase in the blend, the charging system was changed to decrease their content at the periphery, to increase it in the ore ridge zone and make it intermediate between periphery and the ore ridge. At the pellets share in the iron ore raw materials 0.75 the charging system was used as the following: 3OOCC + 1COOC + 1COOCC, while at the content 95.1% the following charging system was used: 2COOC + 2COOC + 1COOCC. It was noted that in the period of guarantee tests the furnace running was smooth. The average silicon content in the hot metal was 0.70% at the standard deviation 0.666. Sulfur content in the hot metal did not exceed 0.024%, the blowing and natural gas consumption figures were 2100 m3/min and 11000 m3/min correspondently, oxygen content in the blowing 26.5%, hot blowing and top smoke pressure figures were 226.5 and 109.8 KPa correspondently. The productivity of the furnace was reached as high as 2358 t/day at the specific coke rate 433 kg/t of hot metal. After guarantee tests completion, the pellets content in the iron ore part was decreased gradually from 95 down to 50%. The decreasing was made by 5% in every 6 hours of operation. Application of the mastered technology of the blast furnace No. 2 with the increased share of pellets will enable to stably supply the blast furnaces No. 1, 3 and 4 by iron ore raw materials in the proportion of 30-35% of pellets and 65-70% of sinter.

Technological aspects of alcohol distillates production from non-traditional sugar-raw materials

2021 ◽  
Vol 9 (16) ◽  
pp. 90-97
Author(s):  
Kateryna Danilova ◽  
◽  
Oksana Zavarzina ◽  
Keyword(s):  
Raw Materials ◽  
Biologically Active ◽  
Raw Material ◽  
Material Base ◽  
Growth Substances ◽  
Technological Properties ◽  
Actual Problem ◽  
Cane Molasses ◽  
Yeast Biomass ◽  
Nitrogen Phosphorus

An actual problem of the alcohol industry development is the expansion of the raw material base through the use of new, cheaper types of carbohydrate sources. Recently, glucose-fructose syrup has been of increasing interest to producers of ethanol. Among the producers of craft drinks, in particular rum-based drinks, cane molasses is in increasing demand. The article presents the technological aspects of the fermentation process of nonconventional sugar-containing raw materials on the example of glucose-fructose syrup and cane molasses in ethanol by different yeast strains. It is determined that glucose-fructose syrup and cane molasses are raw materials depleted of nitrogen, phosphorus and growth substances necessary for the yeast activity. To improve the technological properties of raw materials in the molasses, nitrogen, phosphorus nutrition and corn extract as a growth substance shall be added to a mash. Glucose-fructose syrup is of pH 3.68 and of acidity 0.12, which negatively affects the fermentation. It is established that in order to create optimal living conditions for yeast, it is necessary to add substances to the glucose-fructose syrup that will contribute to the safety of development and prevent the pH 3.5. It was determined that the alcohol yield from 1 ton of glucose-fructose syrup is 31.0 dal, from 1 ton of cane molasses is 24.0 dal on the yeast 46ED and 22 dal on the TegaYeast without the use of growth substances and vitamins necessary for the reproduction of yeast biomass. Under conditions of improving the technological properties of the mash from the glucose-fructose syrup and cane molasses by adding biologically active substances promoting the synthesis of yeast biomass, the ethanol content in the fermented mashes increases up to 11.9 12% vol.

scholarly journals Antimicrobial Activity and Polyphenol Profiles of Hydroalcoholic Extracts of Thymus rasitatus Klokov and Thymus eremita Klokov

2021 ◽  
Vol 9 (A) ◽  
pp. 313-317
Author(s):  
Svetlana Ivasenko ◽  
Ainur Zhumabekova ◽  
Agnieszka Ludwiczuk ◽  
Krystyna Skalicka–Wozniak ◽  
Alexandr Marchenko ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Chromatographic Analysis ◽  
Antimicrobial Agents ◽  
Raw Materials ◽  
Wide Spectrum ◽  
Raw Material ◽  
Thymus Vulgaris ◽  
Material Base ◽  
Ultrasound Assisted Extraction ◽  
Ethanol Extracts

BACKGROUND: A possible reduction in stocks of medicinal plant raw materials of Thymus serpyllum L. and Thymus vulgaris L. leads to the need to expand the raw material base of the official medicinal plants with using of endemic species of the flora of Kazakhstan, in particular, Thymus rasitatus Klokov, and Thymus eremita Klokov. AIM: The aim of the study was to study the possibility of using 70% ethanol extracts of T. rasitatus and T. eremita as antimicrobial agents. MATERIALS AND METHODS: The aerial parts of T. rasitatus and T. eremita were extracted with 70% ethanol using ultrasound assisted extraction. The qualitative and quantitative analyses of the 70% ethanol extracts were determined using the liquid chromatography-detection-ESI-mass spectrometry-(MS)/MS technique. The study of the antimicrobial activity of these extracts was performed for eight strains of Gram-positive bacteria, six strains of Gram-negative bacteria, and four cultures of fungi. RESULTS: Chromatographic analysis of hydroalcoholic extracts of both investigated Thymus species showed very similar phenolic compounds composition. In both cases, the major components are luteolin-7-O-glucoside and rosmarinic acid. About 70% ethanol extracts of T. rasitatus and T. eremita have a broad spectrum of antimicrobial activity, exhibit the bactericidal or bacteriostatic activity against all tested bacteria and fungi at concentration range of 0.0195–20 mg/ml, but differ in their potency against tested strains of microorganisms. CONCLUSION: About 70% ethanol extracts of T. rasitatus and T. eremita, endemic plants in the flora of Kazakhstan, can be considered as potential drugs with a wide spectrum of antimicrobial activity. The results of chromatographic analysis could be used for drug standardization.

scholarly journals Physical and Chemical Fundamentals and Technical Solutions for Recovery of Non-ferrous and Rare Metals from Industrial Wastes

2020 ◽  
Author(s):  
P.A. Kozlov ◽  
A.M. Panshin ◽  
L.I. Leontiev
Keyword(s):  
Russian Federation ◽  
Raw Materials ◽  
Block Diagram ◽  
Industrial Wastes ◽  
Raw Material ◽  
Material Base ◽  
Waelz Process ◽  
Zinc Cadmium ◽  
The Russian Federation ◽  
Increasing Demand

The increasing demand for zinc and a range of zinc-related metals (for example: lead; indium; tin; cadmium; and copper) in the Russian Federation cannot be satisfied by the existing production plants due to the lack of raw materials. At the same time, ferrous and non-ferrous metallurgy and the chemical industry have accumulated hundreds of millions of tons of zinc wastes (falling into the hazard categories 2 to 4), the processing of which could not only make up the raw material base, but also improve the environmental situation. In the world, over 85% of ferrous dust is recycled using the Waelz process. The Waeltz process is used for distilling separation of elements under reducing conditions. In this study, a block diagram for production of the following elements from industrial wastes is proposed: zinc, cadmium and indium in form of massive metals; zinc and indium in the form of fine powders; and clinker as a raw material for cement production. The technical and scientific details of this new process have been patented in the Russian Federation and abroad. For the first time, the following operations have been implemented with the use of large-sized Waelz kilns: vapour-oxidized Waeltz treatment of polymetallic wastes; recycling of heat from gases and solid products with generation of process fumes; and implementation of alternative flux (dolomite) and alternative fuel (petroleum coke). Keywords: Waelz process, industrial wastes, heat recycling, vapour-oxidized Waelz processing

scholarly journals PERSPECTIVES FOR DEVELOPMENT OF TECHNICAL BUILDING STONE- LIMESTONE IN THE REPUBLIC SRPSKA

2015 ◽  
Vol 1 (12) ◽  
Author(s):  
Slobodan Majstorović ◽  
Vladimir Malbašić ◽  
Miodrag Čelebić
Keyword(s):  
Raw Materials ◽  
Production Capacity ◽  
Mineral Resources ◽  
Building Stone ◽  
Raw Material ◽  
Material Base ◽  
Standard Quality ◽  
The Republic ◽  
Fragmentation Of Production ◽  
Republika Srpska

Curent situation of raw material base and study of limestone like construction stone deposits in the Republic of Serbian were relatively poorly considered during the last decades, and the main problems are the following: low production capacity fragmentation of production, needs for raw materials homogenization and delivering of standard quality, undeveloped market, the recession of the domestic economy and the economies in the region, the relatively low level of exploration by many deposits, especially lack of knowledge of the occurrence legality for certain types and quality of raw materials and lack of complete quality indicators for raw material, which sometimes causes the utilization of only the highest quality deposit parts.This paper provides an overview of active quarries in the Republic Srpska with exploitation of limestone like technical building stone and present an attempt to determine the basic quantitative and qualitative characteristics of the raw material and the current working conditions at these quarries. The purpose of such a review would be in an effort to create a clearer picture about production, market, social and other aspects of the limestone exploitation in the Republika Srpska and the realistic possibilities of maintaining and developing of these mineral resources utilization, which can certainlybe interesting for the development of many other industries in the Republic Srpska.

scholarly journals Construction sands of Podillya: patterns of distribution, resources and use

2019 ◽  
Vol 27 (3) ◽  
pp. 510-519
Author(s):  
M. Syvyj ◽  
B. Gavrychok
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Simultaneous Increase ◽  
Clay Material ◽  
Material Base ◽  
Resource Base ◽  
Apparent Correlation ◽  
The Baltic ◽  
Further Development

This article presents the characteristics of the resource base of building sands within the three Podillya regions, the patterns of sands distribution, and proposals for increasing the extraction of raw materials . The construction sands of Podillya are confined to the Upper Cretaceous, Neogene and Anthropogenicdeposits. The decrease of the thickness of the sandy strata of the Opilsk Neogene suite in the eastern direction was observed with the simultaneous increase in the thickness of the overlapping strata of the rocks. There is no apparent correlation between the thickness of sandy interlayers and the quality of sands. The interdependence of the chemical composition of Neogene sands and the sand size module is established.The genetic predisposition for the distribution of building sands in different parts of the Podillya territory has been established. Four groups of sand deposits of different age have been identified within the Podillya regions, which contrast sharply with single deposits in the neighbouring territories.There is a very uneven distribution of explored reserves of sandy raw materials across the region and accordingly in the provision of construction sands in the different oblasts /regions of Podillya. The areas best provided with sandy raw materials are the central districts of Ternopil region and Slavutsky district of Khmelnytsky region . Sands of the Baltic stage distributed in Vinnytsia region are mostly poor in quality, clogged with clay material and require enrichment. The further development of the mineral raw material base and the prospects for increasing the production of construction sand in the Podillya regions is associated with the increase in production at the prepared deposits, the commissioning of reserve deposits, the conducting of prospecting and exploration work in the proposed potentially exploitable areas and additional exploration of individual deposits that are exploited. The research allows us to evaluate objectively the existing base of sand raw materials for various purposes in the Podillya region and to develop on this basis measures to increase it. The importance of the study is determined by the acute shortage of the raw material in most administrative districts of Khmelnytsky and Vinnytsia regions, by the growth in the volume of construction work (and accordingly the requirements for sandy raw materials) both in Podillya and in the country.

Sign in / Sign up

Export Citation Format

Share Document