Ceramic Composition Material with Mullite Crystals Obtained from the Clayy Raw Material of Yakutia

2020 ◽  
Vol 992 ◽  
pp. 253-258
Author(s):  
M.P. Lebedev ◽  
V.N. Tagrov ◽  
E.S. Lukin
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Practical Interest ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Strength Properties ◽  
Raw Material ◽  
Composition Material ◽  
Material Base ◽  
Wide Range

The article deals with the manufacture of modern structural ceramic materials from clay and loam deposits of the Republic of Sakha (Yakutia). The importance and relevance of the development of the production of building materials from local raw materials is emphasized, since this will certainly affect the effectiveness of the construction complex as a whole. The successful development of the construction complex is capable of not only stimulating growth in all sectors of the economy, but also contributes to solving the most pressing social problems. Today, Yakutia has huge reserves of mineral raw materials for the production of a wide range of building materials and products. Of practical interest are wall materials made from clay soils. Given the features of the region’s raw material base, this work focuses on additional processing of traditional material. Controlling the complex physicochemical and structural-mechanical transformations that occur during heat treatment, a methodology has been developed for creating a composite material that will allow competitive innovative materials with enhanced strength properties to be produced with a reinforcing element with a glassy phase matrix of mullite crystals. The fabricated samples have a wide range of physical and mechanical properties and allow using it as a high-quality structural building ceramics, as well as industrial floor technical tile.

scholarly journals THE USE OF WASTE MINERAL WOOL IN THE PRODUCTION OF CERAMIC WALL MATERIALS

2019 ◽  
Vol 10 (3) ◽  
pp. 53-60
Author(s):  
V. Z Abdrakhimov
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Mineral Wool ◽  
Raw Material ◽  
Material Base ◽  
Fusible Clay ◽  
Environmental Situation ◽  
Wall Materials

The environmental situation in Russia is characterized by a high level of anthropogenic impact on the environment, significant environmental consequences of past economic activity. Their disposal and storage costs 8-10 % of the cost of products, so the disposal of such waste is of paramount importance.Due to the involvement of multi-tonnage waste in the production of ceramic materials of mass consumption, which include wall materials, it is possible to radically change the parameters of the raw material base of Russia, which also helps to reduce environmental tensions in the regions. The reduction of reserves of traditional natural raw materials makes us look for new ways to replace it with different types of waste. The experience of advanced foreign countries has shown the technical feasibility of this area and the use of more as a tool to protect the environment from pollution. However, almost all basic building materials can be made from waste or from waste in combination with natural raw materials. On the basis of fusible clay and waste basalt-gabbro-norite charge, which is formed in the production of mineral wool obtained ceramic brick with high physical and mechanical properties, brick grade M150 and above. The absolute advantage of the use of multi-tonnage waste is the unloading of the environmental situation, which contributes to the solution of industrial waste disposal and environmental protection. Innovative proposals for the use of waste from the production of mineral wool in the production of wall materials - ceramic bricks based on fusible clay, the novelty of which is confirmed by patents of the Russian Federation.

WASTE RECYCLING ENERGY AND NON-FERROUS METALS IN THE PRODUCTION OF CERAMIC BRICKS CONTRIBUTES TO THE ECOLOGICAL SAFETY OF THE BIOSPHERE

2019 ◽  
pp. 71-80
Author(s):  
Abdrakhimov
Keyword(s):  
Russian Federation ◽  
Building Materials ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Waste Recycling ◽  
Mineral Wool ◽  
Raw Material ◽  
Material Base ◽  
The Russian Federation

Environmental security is currently one of the main components of the national security of the Russian Federation and includes not only control over the state of the environment, but also the implementation of measures to prevent the occurrence of environmental crises and disasters. The reduction of reserves of tradi-tional natural raw materials makes us look for new ways to replace it with different types of waste. The expe-rience of advanced foreign countries has shown the technical feasibility of this area and the use of more as a tool to protect the environment from pollution. However, almost all basic building materials can be made from waste or from waste in combination with natural raw materials. Due to the involvement of multi-tonnage waste in the production of ceramic materials of mass consumption, which include ceramic bricks, it is possi-ble to radically change the parameters of the raw material base of Russia, which also helps to reduce envi-ronmental tensions in the regions. Production of ceramic bricks  one of the most material-intensive sectors of the economy, so the rational use of fuel, raw materials and other material resources is a decisive factor in its successful development in the context of economic reform. In this regard, the use of waste in ceramic mate-rials is of particular relevance. On the basis of beidellite clay, waste: energy ─ ash and slag material and non-ferrous metallurgy ─ sludge Nickel-skeletal catalyst obtained ceramic brick with high physical and mechanical properties. Innova-tive proposals for the use of waste from the production of mineral wool in the production of wall materials – ceramic bricks based on fusible clay, the novelty of which is confirmed by a patent of the Russian Federation.

The Use of Carbonate Sludge in the Production of Porous Aggregate

2020 ◽  
Vol 24 (6) ◽  
pp. 15-19
Author(s):  
A.V. Kolpakov ◽  
E.S. Abdrakhimova
Keyword(s):  
Industrial Waste ◽  
Liquid Glass ◽  
Glass Composition ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Environmental Safety ◽  
Raw Material ◽  
Material Base ◽  
Carbonate Sludge ◽  
The Russian Federation

The possibilities of obtaining porous fillers based on carbonate sludge and liquid-glass composition are considered. One of the issues of industrial waste disposal is the creation of waste-free technologies. The use of nanotechnology-based carbonate sludge in the production of porous aggregates increases environmental safety. A porous aggregate with high physical and mechanical properties was obtained. The use of carbonate sludge in the production of porous aggregate contributes to: a) recycling of industrial waste; b) environmental protection; C) expanding the raw material base for obtaining ceramic materials for construction. A patent of the Russian Federation was obtained for the obtained method of producing a porous aggregate using a liquid-glass composition.

scholarly journals STUDY ON THE GRINDING TIME DURATION IMPACT ON THE PROPERTIES OF PAPER FROM ALTERNATIVE RAW MATERIALS

2020 ◽  
Vol 2020 (3) ◽  
pp. 24-31
Author(s):  
Z Galimova ◽  
◽  
H Babakhanova ◽  
M Abdunazarov ◽  
I Ismoilov ◽  
...  
Keyword(s):  
Raw Materials ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
Strength Properties ◽  
Milling Process ◽  
Raw Material ◽  
Time Duration ◽  
Paper Production ◽  
Fiber Materials ◽  
The Impact

Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials for paper production, study the impact of processing method of the grinding process on paper forming properties. During grinding the mechanical processes of changes of fibers determine mainly structure of a paper sheet, and colloidal-physical processes - bind and ability of fibers to form strong, homogenous and smooth structure of paper. The structure of the sheet of paper facilitates excessive or "selective" ink absorption into the pores of the paper and thus predetermines the quality of reproduction during the printing process. Methods for determining the physical and mechanical properties of papers were used in this work, and changes in the surface structure of samples cast at various technological modes of the milling process were studied. The results of the study revealed that the addition of cellulose mass from the inner layer of mulberry twig bark helps to obtain a strong paper. The optical properties of the paper, which contains cotton and cellulose from the inner layer of mulberry branch bark, are explained by the whiteness of the added fibers themselves. The strength properties of the paper at a weight grinding degree of 300 CWR are explained by the bond between the split and strongly interwoven fibers of the cellulose fibers. It has been established that the addition of more than 30% cellulose from the inner layer of the mulberry branch bark to the paper pulp mass is undesirable, as this adversely affects the whiteness of the paper

Production of Cement Blocks and New Ceramic Materials with High Content of Glass Waste

2015 ◽  
Vol 663 ◽  
pp. 34-41 ◽  
Author(s):  
Fernanda Andreola ◽  
Isabella Lancellotti ◽  
Rosa Taurino ◽  
Cristina Leonelli ◽  
Luisa Barbieri
Keyword(s):  
Mechanical Properties ◽  
Environmental Impact ◽  
Economic Burden ◽  
Raw Materials ◽  
Glass Melting ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Raw Material ◽  
Added Value ◽  
Glass Waste

Virgin raw materials can be partially replaced by glass waste in order to reduce the environmental impact being its recycling a significant problem for municipalities worldwide. In Italy in 2013, approximately 1,600,000 tons of container glass have been collected but it was not possible to recycle all of them in the glass melting process.This work is focused on the valorization of glass waste as raw material in new cement and ceramic products, to convert it from an environmental and economic burden to a profitable, added-value resource in the formulation of new mixes. Several parameters, such as grinding, forming, firing, etc. have been studied.It has been optimized the grinding and the reclaiming step of waste to obtain an alternative raw material for hot and cold consolidation processes. Chemical, physical and mechanical properties of products were carried out. The results show new real possibilities to use high amounts of glass waste as an alternative raw material in products consolidated either by hot or cold techniques, reducing the management problems of the glass waste.

scholarly journals Ultramafic rocks of the Aganozero chromium ore deposit (South Karelia) as a non-conventional magnesium-silicate raw material for the production of new ceramic materials

2019 ◽  
Author(s):  
V.P. Ilyina ◽  
P.V. Frolov
Keyword(s):  
Raw Materials ◽  
Practical Interest ◽  
Magnesium Silicate ◽  
Ceramic Materials ◽  
Raw Material ◽  
Ultramafic Rocks ◽  
Practical Application ◽  
Ore Deposit ◽  
Chromium Ore ◽  
Technological Level

Ultramafic rocks of the Aganozero chromium ore deposit located in South Karelia are of practical interest as a high-Mg raw material for industrial application. The preliminary results of the study of high-Mg rocks and minerals from the Aganozero deposit for the production of new materials are reported. The high technological level and economic efficiency of the ceramic materials produced, based on Karelia’s high-Mg rocks and industrial minerals, were achieved by reducing energy consumption and simplifying the technological process. The practical application of local types of mineral products will increase the raw materials potential for the production of various types of refractories and industrial ceramics.

scholarly journals Construction of affordable housing using local building materials

2020 ◽  
pp. 154-165
Author(s):  
V. V. Tytok
Keyword(s):  
Affordable Housing ◽  
Industrial Waste ◽  
Building Materials ◽  
Raw Materials ◽  
Construction Materials ◽  
Climatic Conditions ◽  
Raw Material ◽  
Material Base ◽  
Long Distance ◽  
The Cost

Trends in housing development should be based on the geographical location and climatic conditions of the region, national characteristics and culture, natural resources, transport links, density and living standards. Construction significantly affects the socio-economic development of the region. In this regard, increasing the sustainability of the regional construction complex, which is based on the building materials industry and the construction industry is a relevant and promising area of research.Demand in the building materials market continues to stimulate increased interest in the development of new types of efficient and inexpensive building materials. Since construction is one of the most material-intensive sectors of the economy, which consumes a large number of construction materials and products, various measures are taken to reduce their cost.In this regard, recently in the construction seek to make greater use of local building materials. This allows you to unload transport from long-distance transportation and significantly reduces the cost of construction. However, the building materials industry cannot develop by focusing only on natural sources of raw materials, as the costs of their extraction and processing are constantly growing. The use of man-made waste provides production with a rich source of cheap and often already prepared raw materials, which reduces the cost of manufacturing building materials.One of the promising areas in the construction of affordable housing is the maximum use of building materials and products that can be obtained from local raw materials and industrial waste. As local building materials are offered: clay, sand, soil, straw, reeds, flax. The use of industrial waste solves both environmental, fuel and energy problems and expands the raw material base of building materials.

scholarly journals STUDY OF RECEIVING WOOD AND PLANT PLASTICS WITHOUT BINDERS IN THE PRESENCE OF CATALYSTS OF POLYOXOMETALLATES TYPE

2018 ◽  
Vol 8 (1) ◽  
pp. 132-138
Author(s):  
Виктор Бурындин ◽  
Viktor Buryndin ◽  
Лариса Бельчинская ◽  
Larisa Belchinskaya ◽  
Андрей Савиновских ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Functional Groups ◽  
Hot Pressing ◽  
Raw Materials ◽  
Flexural Modulus ◽  
Chemical Activation ◽  
Physical And Mechanical Properties ◽  
Strength Properties ◽  
Raw Material ◽  
Plastic Properties

The possibility of obtaining wood and plant plastics without a binder (WP-WB) in the presence of a catalyst of man-ganese-containing sodium vanadomolybdophosphate has been investigated. The use of this catalyst makes it possible to reduce the temperature of hot pressing in closed molds from 1,800°C to 1,600°C. The fractional composition of the initial press raw material influences physical and mechanical properties of WP-WB. Higher values of the plastic properties are obtained by using a 0.7 mm fraction, which is associated with an increased specific surface area of the particles compared to 1.3 mm particles. The results has showed that the samples obtained by using the catalyst have increase in strength properties (flexural strength, flexural modulus, hardness) at lower pressing temperature, but reduction of water resistance performance has been observed . This is explained by the increase in the content of functional groups when using a catalyst. The process of obtaining plastic can be broken down into two successive stages: the first is hydrothermal destruction of lignin-carbohydrate complex (initial moisture of the press raw material is 12%, the temperature of hot pressing in closed molds is 160 ... .180 ° C) and partial chemical activation of lignin as a result of hydrogen peroxide and catalyst application; the second stage - formation of plastic with the formation of a network structure due to the formed functional groups. It is established that the values of physical and mechanical properties of WP-WB are higher than those of plastic obtained on the basis of plant raw materials (PP-WB). This can be explained by the fact that lignin of coniferous species has the guaiacylpropane structure, while plant raw material has a hydroxyphenylpropane structure

STUDY OF MORPHOMETRIC CHARACTERISTICS OF ALDER LEAVES OF PHARMACOPOEIAL SPECIES

2021 ◽  
pp. 129-134
Author(s):  
Nesterov G.V. ◽  
Litvinova T.M. ◽  
Vasalatiy L.A.
Keyword(s):  
Raw Materials ◽  
Biologically Active ◽  
Raw Material ◽  
Food Plants ◽  
Wild Plants ◽  
Material Base ◽  
Black Alder ◽  
Plant Raw Materials ◽  
Wide Range ◽  
Promising Area

To expand the raw material base of medicinal plant raw materials, a promising area of research is the study of additional types of raw materials that can be harvested from already used medicinal and food plants. Given the complexity of harvesting alder seeds, researchers are interested in the leaves of this plant, a wide range of biologically active substances that cause anti-inflammatory, astringent and antioxidant effects. The first stage of standardization of raw materials is the definition of morphologically significant features, based on the generalization of which the section "External features" is developed. The analysis of morphological features of freshly harvested, dried and frozen leaves of gray alder (Alnus incana Moench) and black alder (A. glutinosa Gaerth) harvested from wild plants in mixed forests of the Moscow region revealed diagnostically significant features and found that the method of conservation does not affect the occurrence of the identified features. Since it is planned to use both types of alder for the preparation of a new type of raw material "Alder leaves", a generalized formulation is proposed for raw materials that are a mixture of species.

BIOECOLOGY AND COMPONENT COMPOSITION OF EPHEDRINE ALKALOIDS IN SPECIES IN THE DZUNGARIAN ALATAU

Vestnik ◽  
2021 ◽  
pp. 247-253
Author(s):  
Л.С. Кожамжарова ◽  
Н.Т. Аблайханова ◽  
З.Б. Есимсиитова ◽  
А.М. Мухитдинов ◽  
Е.Т. Аблайханов
Keyword(s):  
Raw Materials ◽  
Practical Interest ◽  
Complete Information ◽  
Component Composition ◽  
Raw Material ◽  
Practical Significance ◽  
Material Base ◽  
Full Spectrum ◽  
Plant Raw Materials ◽  
Pharmacological Data

Как показывают данные фармакологических исследований, природные алкалоиды обладают более высоким качеством терапевтического эффекта и срок действия их продолжительнее. При полноценном растительном сырье и достаточных его запасах или при успешной культуре растения тот или иной алкалоид, несомненно, удобнее и экономически выгоднее получать из натурального растительного сырья. В связи с этим практический интерес представляют работы по выявлению и пополнению сведений о фитохимическом составе ценных технических растений флоры Казахстана в свете последних достижений биохимии, биоорганической химии. В статье, для выяснения установление закономерностей изменения количественного содержания и качественного состава эфедриновых алкалоидов от экологических факторов были изучены биоэкологические особенности и выявлены популяции с высоким и пониженным содержанием компонентного состава эфедриновых алкалоидов у видов E.Equisetina в Джунгарском Алатау, а также, установлен полный спектр эфедриновых алкалоидов в вегетативных побегах изучаемого вида. Практическое значение результатов работы является основой для использования сырьевой базы вида E.Equisetina рода Ephedra L., в отечественной фармацевтической промышленности. According to pharmacological data, natural alkaloids have better therapeutic quality and longer duration. If the raw material is full and sufficient, or if the plant culture is successful, some alkaloid is certainly more convenient and economically more profitable to obtain from natural plant raw materials. In this connection, work to identify and complete information on the phytochemical composition of valuable technical plants in the flora of Kazakhstan, in the light of recent advances in biochemistry and bioorganic chemistry, is of practical interest. In the article, to determine the main regularities of changes in the quantitative content and qualitative composition of ephedrine alkaloids from environmental factors, bioecological features were studied and populations with high and low content of the component composition of ephedrine alkaloids in E. Equisetina species in the Dzungarian Alatau were identified. Also, was established the full spectrum of ephedrine alkaloids in vegetative shoots of the studied. The practical significance of the results is the basis for using the raw material base of the species E. Equisetina of the genus Ephedra L. in the domestic pharmaceutical industry.

Sign in / Sign up

Export Citation Format

Share Document