scholarly journals Deficit Irrigation in Peach Orchards under Water Scarcity Conditions

2020 ◽  
Author(s):  
António Canatário Duarte ◽  
Abel Veloso ◽  
António Ramos ◽  
Dora Ferreira ◽  
Maria Paula Simões
Keyword(s):  
Water Supply ◽  
Deficit Irrigation ◽  
Crop Production ◽  
Dilution Effect ◽  
Soluble Solids ◽  
Eastern Region ◽  
Total Production ◽  
Fruit Firmness ◽  
Total Soluble Solids ◽  
Average Production

The irrigation patterns in two peach orchards, located in the central eastern region of Portugal, called “Beira Interior”, and the effect of different amounts of irrigation on the total production and fruit quality were evaluated. The experiment was conducted in 2016, in two different orchards, and included three treatments correspondent to three different flow rates per tree: 8, 12 and 16 l/hour. The water balance, which included the water supplied by rain and irrigation and the crop evapotranspiration, was developed. At harvest, crop production, pulp firmness and percentage of the total soluble solids were evaluated. There were no significant differences between treatments in the average production per tree. However, in one of the orchards production increased with the volume of irrigation. In the same orchard, fruit firmness decreased with the increasing water supply. Total soluble solids had decreased with the increasing water supply in both orchards, probably as a consequence of the dilution effect due, directly, to the water incorporated in the fruits, or, indirectly, to the larger fruits produced by the trees that were irrigated more. In general, the treatments used in this study as well as in the farmers’ practices, the supplied water was in deficit, but the farmers tend empirically to follow closely the evolution of evapotranspiration. Keywords: Deficit irrigation, Peach tree, Production, Total soluble solids, Fruit firmness

scholarly journals Heterosis for post harvest and nutritional quality traits in tomato (Solanum lycopersicum L.)

2016 ◽  
Vol 8 (4) ◽  
pp. 1987-1991
Author(s):  
Rakesh Kumar ◽  
H. R. Sharma ◽  
Manish Kumar
Keyword(s):  
Ascorbic Acid ◽  
Shelf Life ◽  
Nutritional Quality ◽  
Soluble Solids ◽  
Quality Traits ◽  
Fruit Firmness ◽  
Total Soluble Solids ◽  
Post Harvest ◽  
Lycopene Content ◽  
Pericarp Thickness

A study was conducted in tomato using an 6 x 6 diallel crossing design excluding reciprocals to quantify the magnitude of heterosis and to identify the best heterotic combinations for post harvest and nutritional quality attributes viz. pericarp thickness (mm), fruit firmness (g/0.503 cm2), shelf life (days), total soluble solids (oBrix), lycopene content (mg/100g) and ascorbic acid (mg/100g) which are considered essential in present day hybrid varieties of tomato from consumer point of view. All the 22 entries (6 parents, 15 F1 hybrids and 1 standard check) were field evaluated using randomized complete block design with three replications during Kharif 2015-16. Highly significant heterosis (5% level of significance) of positive nature was found for pericarp thickness (22.90%, 32.20% and 5.62%), fruit firmness (17.32%, 56.72% and 9.21%), shelf life (17.54%, 24.87% and 9.57%), total soluble solids (24.44%, 51.44% and 34.20%), lycopene content (28.75%, 35.05% and 25.63%) and ascorbic acid (19.07%,30.00% and 17.85%) over the better, mid and standard check, respectively. Three promising crosses viz., Solan Lalima x EC-1055, Solan Lalima x EC-1057 and Solan Lalima x EC-1058 were identified as high yielding F1 combinations having superiority to post harvest and nutritional quality traits in tomato and can be promoted for release and commercial cultivation.

Climate and the efficiency of crop production in Britain

1977 ◽  
Vol 281 (980) ◽  
pp. 277-294 ◽  
Keyword(s):  
Solar Radiation ◽  
Water Supply ◽  
Crop Production ◽  
Energy Output ◽  
Total Production ◽  
Strongly Correlated ◽  
Arable Crops ◽  
Development Phases ◽  
Intercepted Radiation ◽  
Duration Of Development

The efficiency of crop production is defined in thermodynamic terms as the ratio of energy output (carbohydrate) to energy input (solar radiation). Temperature and water supply are the main climatic constraints on efficiency. Over most of Britain, the radiation and thermal climates are uniform and rainfall is the main discriminant of yield between regions. Total production of dry matter by barley, potatoes, sugar beet, and apples is strongly correlated with intercepted radiation and these crops form carbohydrate at about 1.4 g per MJ solar energy, equivalent to 2.4% efficiency. Crop growth in Britain may therefore be analysed in terms of ( a ) the amount of light intercepted during the growing season and ( b ) the efficiency with which intercepted light is used. The amount intercepted depends on the seasonal distribution of leaf area which, in turn, depends on temperature and soil water supply. These variables are discussed in terms of the rate and duration of development phases. A factorial analysis of efficiency shows that the major arable crops in Britain intercept only about 40 % of annual solar radiation and their efficiency for supplying energy through economic yield is only about 0.3%. Some of the factors responsible for this figure are well understood and some are immutable. More work is needed to identify the factors responsible for the large differences between average commercial and record yields.

scholarly journals Mitigation the adverse effect of salinity stress on the performance of the tomato crop by exogenous application of chitosan

2020 ◽  
Vol 44 (1) ◽  
Author(s):  
Naeem Ullah ◽  
Abdul Basit ◽  
Imran Ahmad ◽  
Izhar Ullah ◽  
Syed Tanveer Shah ◽  
...  
Keyword(s):  
Leaf Area ◽  
Plant Height ◽  
Salinity Stress ◽  
Fruit Juice ◽  
Stem Diameter ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Total Soluble Solids ◽  
Leaf Chlorophyll Content ◽  
Leaf Chlorophyll

Abstract Background In recent years, ecofriendly compounds such as chitosan has been used to alleviate the destructive effects of salt stress. Chitosan is a natural biodegradable compound with no toxicity in nature and act as a stress tolerance inductor involved in physiological processes and prevent water loss through transpiration. Tomato cv. Rio Grande grown in pots was subjected with salinity stress in the form of 4 levels (0, 50, 100 and 150 mM) whose effect was mediated by treating it with different concentration of chitosan (0, 50, 100 and 150 mg L−1). Results The data revealed that various application of salinity had a negative effect on almost all the studied parameters. Tomato plants treated with distilled water having no salinity (control) recorded maximum plant height (cm), average number of compound leaves plant−1, leaf area (cm2), stem diameter (mm), number of fruits plant−1, fruit firmness (kg cm−2), leaf chlorophyll content (SPAD), fruit juice pH, yield plant−1 (kg) and minimum total soluble solids (Brix°). Whereas, minimum plant height (cm), average number of compound leaves plant−1, leaf area (cm2), stem diameter (mm), number of fruits plant−1, fruit firmness (kg cm−2), leaf chlorophyll content (SPAD), fruit juice pH, yield plant−1 (kg) and maximum total soluble solids (Brix°) were found in plants treated with salinity level of 150 mM. Chitosan concentration of 150 mg L−1 significantly mediated the effect of salinity stress and recorded maximum plant height (cm), average number of compound leaves plant−1, leaf area (cm2), stem diameter (mm), number of fruits plant−1, fruit firmness (kg cm−2), leaf chlorophyll content (SPAD), total soluble solids (Brix°) and yield plant−1 (kg) with minimum fruit juice pH. Conclusion It is concluded that foliar application of chitosan at the rate of 150 mg L−1 and salinity stress 150 mM could have positive impact on performance of tomato.

scholarly journals EVALUATION OF THE IMPACT OF IRRIGATION ON FRUIT FIRMNESS AND TOTAL SOLUBLE SOLIDS CONTENT OF THE CLINGSTONE PEACH CV. 'ANDROSS'

2019 ◽  
Vol 35 ◽  
pp. 21-23
Author(s):  
Simeon Marnasidis ◽  
◽  
Thomas Sotiropoulos ◽  
Ioannis Manthos ◽  
◽  
...  
Keyword(s):  
Soluble Solids ◽  
Fruit Firmness ◽  
Soluble Solids Content ◽  
Total Soluble Solids ◽  
Solids Content ◽  
The Impact

scholarly journals Effect of Post-Harvest Degreening on Quality Parameters of Acid Lime Cv. Balaji

2020 ◽  
pp. 15-27
Author(s):  
Pooja Yaddanapudi ◽  
Kiran Kumar Adapa
Keyword(s):  
Ascorbic Acid ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Ambient Conditions ◽  
Total Soluble Solids ◽  
Post Harvest ◽  
Acid Lime

Analyze the effect of post-harvest degreening on quality parameters of Acid lime cv. Balaji. The present research was conducted at Post harvest laboratory of College of Horticulture, Sri Konda Laxman Telangana State Horticultural University, Rajendranagar, Hyderabad, during the year 2018-2019. Experiment was designated with two factorial completely randomized design with two factors viz., (A) Ethylene concentrations, (B) Number of pulsings were taken for test and executed with the objective: Effect of post-harvest degreening on quality parameters of Acid lime cv. Balaji. The Acid lime cv. Balaji fruits were harvested and subjected to degreening treatments for one day. The treated Acid lime fruits were stored for sixteen days at ambient conditions. Acid lime fruits picked randomly from treated lot and evaluated for Physiological loss in weight %, Peel thickness mm, Fruit firmness Kg/cm2, Total soluble solids °Bx, Titratable acidity %, Ascorbic acid mg/100 g, Juice recovery % at four days interval by adopting the respective methods. Among all the quality parameters there were gradual increase in Total soluble solids (TSS), Juice recovery, Physiological loss in weight (PLW) and there were decreased trend in Titratable acidity, Peel thickness, Fruit firmness and Ascorbic acid content. Ethylene @ 15 ppm proved the better results for the above parameters. Among different number of pulsings, 1 pulsing in 24 hours @ 24 hrs interval and 2 pulsings in 24 hr @ 12 hrs interval was best.

scholarly journals Effects of Forchlorofenuron (CPPU) treatment on fruit properties in the fruit of common guava

2019 ◽  
Vol 72 (2) ◽  
pp. 7
Author(s):  
Zeiynab Sabaghnia ◽  
Fariborz Zaree Nahandi
Keyword(s):  
Ascorbic Acid ◽  
Vitamin C ◽  
Principal Components ◽  
Fruit Size ◽  
Soluble Solids ◽  
Total Acidity ◽  
Fruit Firmness ◽  
Total Soluble Solids ◽  
Guava Fruit

<p>The common guava is a small tree from Myrtacaeae family which is cultivated for its fruits. Researches have explored new methods to promote fruit yields and quality of crops. Application of Forchlorofenuron or CPPU (with Molecular Formula: C12H10CIN3O) improves the fruit size as well as its quality, but there has not been an investigation evaluating its effects on common guava fruit under field conditions. This research was performed to study the effects of different doses of CPPU (0, 10, 20 and 40 mg L-1) on common guava fruit size and quality characteristics under field conditions. Analysis of variance and LSD (least significant differences) mean compression indicated that total soluble solids, total acidity, ascorbic acid or vitamin C, fruit firmness, phenolics, 1,1-Diphenyl-2-picrylhydrazyl (DPPH), polygalacturonase, pectin methyl esterase and ethylene were significantly different in most traits and CPPU-40 produced high means. The principal components (PC) analysis explained 95% of the total variation and the first two principal components (PC1 and PC2) explained 78% and 17% of the total variation, respectively. According to biplot, CPPU-40 had the highest values for all of the measured traits except DPPH, ethylene and polygalacturonase. The most prominent relations by biplot were a strong positive correlation among phenolics, fruit firmness, total acidity, total soluble solids and ascorbic acid as indicated by the small obtuse angles between their vectors. The measured traits were grouped into two clusters and cutoff point verified via Wilks’ lambda statistics. Cluster I consisted of three traits (ascorbic acid or vitamin C, fruit firmness and ethylene) while cluster II included total soluble solids. Findings of this study suggest that CPPU can be used as an effective growth regulator to improve the size and quality of common guava fruit.</p>

scholarly journals Influence of Putrescine Application on Storability, Postharvest Quality and Antioxidant Activity of Two Iranian Apricot (Prunus armeniaca L.) Cultivars

2013 ◽  
Vol 5 (2) ◽  
pp. 212-219 ◽  
Author(s):  
Gholamhossein DAVARYNEJAD ◽  
Mehdi ZAREI ◽  
Elham ARDAKANI ◽  
Mohamad Ebrahim NASRABADI
Keyword(s):  
Antioxidant Activity ◽  
Weight Loss ◽  
Ascorbic Acid ◽  
Total Phenolics ◽  
Titratable Acidity ◽  
Maturity Index ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Postharvest Storage ◽  
Total Soluble Solids

The limited postharvest storage life of apricot is the focus of this study. Presenting a solution to improve the postharvest storage of studied apricot cultivars is the goal. Studding the effect of different concentration of postharvest putrescine on quality attributes and antioxidant activity of two apricot cultivars during storage is the approach taken. The two apricot cultivars (‘Lasgerdi’ and ‘Shahrodi’) were harvested at the commercial ripening stage, and fruits were immerged in 1, 2, 3 and 4 mM putrescine as well as distilled water (control) for 5 min, then fruits were packed in boxes with polyethylene cover and stored at 4°C and 95% relative humidity for 20 days. The changes in weight loss, fruit firmness, total soluble solids, titratable acidity, pH, maturity index, ascorbic acid, total phenolics and antioxidant activity were estimated after 0, 5, 10, 15 and 20 days during storage. The results showed that the weight loss, total soluble solids, pH and maturity index increased significantly while the fruit firmness, titratable acidity, ascorbic acid, total phenolics and antioxidant activity decreased significantly during storage for both cultivars. During storage, a significant difference between control and putrescine treatments in all measured parameters is observed. The putrescine treatments reduced significantly the weight loss and maintained their firmness. In this condition, the highest and lowest of titratable acidity, ascorbic acid, total phenolics and antioxidant activity were observed in treatments of 4 mM putrescine and control, respectively. The data revealed that the quality of apricot fruits was improved by the use of putrescine treatment due to its effect on delaying the ripening processes.

scholarly journals (202) Quality of Sapote Mamey Fruits Treated with Hot Water and Stored at 12 °C

HortScience ◽  
2006 ◽  
Vol 41 (4) ◽  
pp. 1051E-1052
Author(s):  
Arturo Martinez-Morales ◽  
Iran Alia-Tejacal ◽  
Maria-Teresa Colinas-Leon ◽  
Victor Lopez-Martinez ◽  
Cecilio Bautista
Keyword(s):  
Water Treatment ◽  
Respiration Rate ◽  
Ethylene Production ◽  
Chilling Injury ◽  
Storage Period ◽  
Hot Water ◽  
Soluble Solids ◽  
Hot Water Treatment ◽  
Fruit Firmness ◽  
Total Soluble Solids

Sapote mamey (Pouteria sapota) fruit commercialization to different markets is limited due to the fact that it is a host of the fruit fly (A. serpentina), so there is a special interest in generating a quarantine treatment protocol. In the present study, fruits from Jalpa de Mendez, Tabasco, Mexico, were harvested at physiological maturity and divided in two groups: a) fruits treated with hot water (46.1 °C) for 1 h, and b) control fruits, with no hot water treatment. Fruits were then stored at 12 °C for 7, 14, 21, and 28 days. After storage, days to ripening as well as respiration rate, ethylene production, and weight loss were evaluated for 6 days. Pulp color (ligthness, hue angle, and chroma), fruit firmness, total soluble solids and sugars, and total phenols (at the end of storage and 6 days after) were also evaluated. Results show that fruits stored for 0 days ripened in 5.8 days, while fruits stored between 7 and 28 days took between 3.2 and 5.6 days to reach the ripe stage. Considering the storage periods, effective postharvest life was increased between 11 and 32 days. Respiration rate markedly increased in control fruits after 21 days of storage, but no chilling injury symptoms were observed. Hot water treatment did not affect ethylene production, sugar or phenol content, color, and fruit firmness. Total soluble solids and sugars increased as storage period increased and even more after storage, thus suggesting that storage temperature does not stop the ripening process. No significant changes were observed in the color components. Results suggest that the hot water inmersion treatment is an alternative to reach the quarantine protocol (not affecting quality) and when combined with refrigeration could be used to sent fruit to distant places.

scholarly journals Adubação potássica na produção e qualidade pós-colheita de goiaba ‘Paluma’ no semiárido potiguar

2016 ◽  
Vol 7 (1) ◽  
pp. 139 ◽  
Author(s):  
Renato Dantas Alencar ◽  
Grazianny Andrade Leite ◽  
Vander Mendonca Mendonça ◽  
Franciezer Vicente de Lima ◽  
Gustavo Alves Pereira ◽  
...  
Keyword(s):  
Titratable Acidity ◽  
Linear Increase ◽  
Soluble Solids ◽  
Average Weight ◽  
Total Production ◽  
Fruit Firmness ◽  
Guava Fruit ◽  
Commercial Yield ◽  
Solids Content

The aim of this study was to evaluate the effect of potassium fertilization on yield and final quality of guava fruit variety ‘Paluma’, grown at the Irrigated District of Baixo Açu-RN, Brazil. The experimental was carried out in a completelyrandomized blocks design in split plot with five treatments (0, 0.5, 1.0, 1.5 and 2.0 kg K2O plant-1) with four repetitions. The subplots were composed of two harvest seasons and the following characteristics were evaluated: number of fruits, commercial production, total production, commercial yield, average weight of commercial fruits and average weight of total fruit. For fruit quality the following characteristics were evaluated: vitamin C, soluble solids content, firmness, titratable acidity, flesh pH, fruit length and. With an increasie of K2O dose, a linear increase in the number of fruits was observed and ahigher yield was obtained when a dose of 0.370 kg K2O per plant was applied and a higher fruit firmness was obtained with a dose of 1.2 kg K2O per plant.

Sign in / Sign up

Export Citation Format

Share Document