scholarly journals CERTIFICATION DEPOT AS ONE OF WAYS TO ENHANCE PERFORMANCE MULTIPLE UNITS

2015 ◽  
Vol 2 (158) ◽  
Author(s):  
Anatoliy Falendysh ◽  
Vіktor Baikov ◽  
Olga Kletska
Keyword(s):  
Traffic Safety ◽  
Technical Condition ◽  
Rolling Stock ◽  
Multiple Units

The technical condition of the locomotive fleet is directly related to traffic safety. However,according to the Department's annual suburban passenger Ukrzaliznytsia analysis Traffic Safety negativetrend of the deteriorating condition of the motor-car rolling stock (MVPS) is stored.

scholarly journals SCIENTIFIC APPROACH TO THE METHODS OF INCREASING THE LIFE CYCLE OF WHEELS OF RAILWAY VEHICLES

2021 ◽  
Vol 1 (38) ◽  
pp. 164-172
Author(s):  
S. Sapronova ◽  
V. Tkachenko ◽  
N. Braikovska ◽  
Y. Zub
Keyword(s):  
Life Cycle ◽  
Traffic Safety ◽  
Technical Condition ◽  
Rolling Stock ◽  
Optimal Parameters ◽  
Maintenance And Repair ◽  
Complete Restoration ◽  
Scientific Approach ◽  
Wheel Profile ◽  
Railway Rolling Stock

The value of the life cycle of rolling stock wheels is determined by the frequency of maintenance, in the process of which the turning is carried out to restore the profiles of the rolling surfaces, or the replacement of completely worn wheels. Traffic safety depends on the technical condition of the wheels of locomotives and wagons. Maintenance and repair of wheelsets accounts for about 30% of all costs of Ukrzaliznytsia's rolling stock repair units. Wheel repair technologies are based on the complete restoration of wheel profiles by turning, using which, their life cycle is reduced, and costs increase by 20% or more. The railways of Ukraine use an outdated, unreasonable, inefficient system of control over the formation of rolling surfaces in operation. Therefore, there is a need to create a scientifically sound approach to methods of extending the life cycle of the wheels of locomotives and wagons while ensuring the safety of railway rolling stock. According to the proposed scientific approach, the wheel profile is restored to optimal parameters, which provides an extended life cycle of wheelsets. As a result of the developed scientific approach the life cycle of wheel pairs will increase by 15… 25% and the expenses of the railway for their repair will considerably decrease.

scholarly journals Improving the Methodology of Placing Peripheral Devices for Monitoring the Technical Condition of Rolling Stock

2021 ◽  
pp. 25-36
Author(s):  
V. V. Burchenkov
Keyword(s):  
Traffic Safety ◽  
Block Diagram ◽  
Research Work ◽  
Technical Condition ◽  
Rolling Stock ◽  
Functional Block Diagram ◽  
Process Step ◽  
Technical Control ◽  
Control Devices

Purpose. Based on the research work of units and parts of rolling stock undercarriage in transient modes of emergency situations it is proposed to optimize the sequential placing of peripheral contactless devices for technical control of locomotives and cars on railway lines. Methodology. Investigation of transient processes of temperature increase of faulty axle bearings of locomotives and cars during remote technical diagnosing allows one to organize theory and hardware construction of the peripheral systems for testing the rolling stock on the move. Automatic control of the technical state of the rolling stock on the move – the last and in some cases the only possible process step, which allows revealing unacceptable defects in rolling units and thereby prevent emergencies in railway transport. Findings. Based on the research it was proposed a solution to the optimization problem of placing peripheral control devices of rolling stock when moving according to the criteria of the linear and exponential nature of heating defective axle boxes of wheelsets and other units of undercarriage. The risks of train stop on the railway line because of the erroneous classification of normally heated axle boxes as overheated, as well as the consequences of classification of overheated axle box as normally heated axle boxes were evaluated. Originality. Optimization model of placing peripheral control devices based on probabilistic criteria for evaluating the degree of permissible risk that, at a minimum, should not be exceeded during the transition to control technical means. A functional block diagram of test hardware diagnostics for the wheelsets when determining the gradations of digital indicators of defects was proposed. Practical value. The value of the results obtained lies in the improvement of a method of placing technical control peripheral devices and diagnosing rolling stock when determining the distance between the control stations in the same direction and organizing tracking modes for railcars with developing defects. From a technical point, reduced error probability is directly related to traffic safety and diagnostic algorithms.

scholarly journals RESEARCH INTO SAFE TRAFFIC OF LITHUANIAN RAILWAY LINES

Transport ◽  
2005 ◽  
Vol 20 (4) ◽  
pp. 154-159
Author(s):  
Laura Černiauskaite ◽  
Igoris Podagelis ◽  
Kazys Sakalauskas
Keyword(s):  
Traffic Safety ◽  
Traffic Accidents ◽  
Human Factor ◽  
Technical Condition ◽  
Rolling Stock ◽  
The European Union ◽  
Stock Company ◽  
Traffic Incidents ◽  
First Results

The European Union directions pay a specific focus on traffic safety. Safety of railway transport traffic is among priority fields which has a direct effect on the quality of life of the population. It is most convenient to consider the number of breaks and accidents per year as the indicator of traffic safety. Reasons of traffic accidents can be very different. Most accidents occur due to poor technical condition of rolling‐stock and infrastructure, the human factor and the deficient organization of traffic. Stock Company “Lithuanian railways” can not assure safe traffic yet. The number of traffic incidents decreased in a few preserves only. Considering that, it is necessary to prepare a strategy for traffic safety and the program for its implementation. In 2002 specialists started preparing a study for safe traffic. The study is important for the preparation and implementation of the mentioned program. First results obtained from the research have already approved the importance of the influence of infrastructure, rolling‐stock and a human factor on traffic safety. The research carried out indicates positive changes in the situation of traffic safety of Lithuanian railways.

scholarly journals Experimental study of the rolling resistance of car wheels on a roller stand

2021 ◽  
Vol 12 (2) ◽  
pp. 68-75
Author(s):  
Igor Мarmut ◽  
◽  
Vitalii Kashkanov ◽  
Volodymyr Zuiev ◽  
◽  
...  
Keyword(s):  
Traffic Safety ◽  
Experimental Studies ◽  
Rolling Resistance ◽  
Resistance Coefficient ◽  
Technical Condition ◽  
Radial Force ◽  
Test Method ◽  
Rolling Stock ◽  
Passenger Cars ◽  
Wheel Rolling

The article considers the results of experimental studies of the rolling resistance of car wheels on a roller stand. Also, the dependence of the coefficient of total resistances during wheel rolling on the stand rollers on the speed was established. Monitoring and diagnosing the technical condition of the rolling stock of vehicles from the point of view of traffic safety is one of the most important problems. This control is especially important for systems whose technical condition affects traffic safety, first of all, brake systems, as well as the power unit in the traction test mode. Foreign and domestic experience testifies to the effectiveness of instrumental control. Its advantages lie in the reliability of the values of the checked parameters. The diagnostic equipment includes roller stands, on which you can check the braking and traction properties of cars. As shown by many studies, in particular, carried out at the Department of Technical Operation and Service of Automobiles, KhNADU (HADI), inertial stands provide more reliable information about the technical condition of the car. The inertial test method allows you to reproduce real speed and thermal modes of operation. To improve the accuracy of diagnosing a car on a roller stand, it is necessary to have an idea of the nature of the interaction of the car wheels with the stand rollers. Studies of wheel rolling on the stand rollers have been carried out by many authors since the 70s of the last century. However, all of these studies were conducted on old bias tires. Now, only radial tires are used on passenger cars, the rolling resistance of which on rollers has practically not been studied. Therefore, returning to the study of this issue is relevant. The rolling resistance of wheels on the rollers of the stand will significantly affect the nature of their interaction during long-term running tests (due to increased heating of contacting bodies, power losses, violation of similarity conditions, etc.). It was found that the value of the rolling resistance coefficient noticeably depends on the ratio of the radii of the roller and the wheel, as well as the contact load, that is, the radial force of pressing the wheel against the roller, and in addition, on the speed and duration of the mode. The obtained results of the experiment made it possible to improve the theory of the interaction of a car wheel with the rollers of an inertial diagnostic stand. Also, the results of the experiments can be extended to different types of tires and the ratio of the radii of the wheel and roller.

scholarly journals TECHNICAL DIAGNOSTICS-GUARANTEE OF HIGH-QUALITY AND EFFECTIVE MAINTENANCE OF TIMBER ROLLING STOCK

2021 ◽  
Vol 10 (4) ◽  
pp. 208-216
Author(s):  
Konstantin Yakovlev ◽  
Sergey Legostaev
Keyword(s):  
Traffic Safety ◽  
Road Safety ◽  
Technical Condition ◽  
Rolling Stock ◽  
Technical Diagnostics ◽  
Control Room ◽  
Safe Operation ◽  
Standard Analysis ◽  
Remote Transmission ◽  
Diagnostics System

A logging vehicle is a source of increased danger, and its serviceability affects road safety. Diagnostics of the technical condition of the car allows you to timely identify serious defects in components, mechanisms and aggregates without removing them and disassembling them, to have time to eliminate malfunctions in time and bring the technical characteristics to the standard. Analysis of the literature data has shown that diagnostics of the technical condition of a logging vehicle plays an important role in preventing accidents. Our task was to improve the reliability of the car and reduce the complexity of work during the next maintenance. In the article, we justify the criteria necessary for the organization of safe operation of logging vehicles when transporting timber on public roads. The age and technical condition of the timber rolling stock fleet is analyzed. The most frequent failures of forest transport vehicles on the example of cars of the KAMAZ family, affecting the organization of traffic safety, are determined. The necessity of pre-trip control inspections and Express diagnostics of vehicles is revealed. Taking into account the identified shortcomings, the scheme of post-trip removal of parameters from the built-in diagnostics system of a logging vehicle and subsequent remote transmission of data to the server of the control room of a motor transport enterprise has been developed. The conducted scientific research allowed us to find a solution to the problem, which is to allocate technical diagnostics in an independent type of technical impact. This measure will reduce the costs of premature technical impacts on the systems, components and aggregates of timber rolling stock without reducing the requirements for traffic safety

Investigation of the interaction of car wheels with the stand rollers during braking

2021 ◽  
Vol 13 (1) ◽  
pp. 68-77
Author(s):  
Igor Мarmut ◽  
◽  
Andriy Kashkanov ◽  
Vitaliy Kashkanov ◽  
◽  
...  
Keyword(s):  
Traffic Safety ◽  
Technical Condition ◽  
The Body ◽  
Power Model ◽  
Equilibrium Equations ◽  
Design Features ◽  
Complex Objects ◽  
Passenger Cars ◽  
Wheel Drive ◽  
Four Wheel Drive

The article discusses the issues of modeling conditions for obtaining diagnostic information about complex objects. As an example, the study of the braking qualities of four-wheel drive cars on an inertial roller stand is considered. Diagnosing the technical condition of cars from the point of view of traffic safety is one of the most important problems. This is especially important for systems whose technical condition affects traffic safety: especially braking systems. Foreign and domestic experience testifies to the effectiveness of instrumental control. The diagnostic equipment includes roller stands, on which you can check the braking properties of cars. As shown by many studies, in particular, carried out at the Department of Technical Operation and Service of Automobiles, KhNADU (HADI), inertial stands provide more reliable information about the technical condition of the car. Such stands allow you to reproduce the real speed and thermal modes of the brakes (especially those equipped with ABS). To improve the accuracy of diagnosing a car on a roller stand, it is necessary to have an idea of the nature of the interaction of the car wheels with the rollers. The studies of wheel rolling on the stand rollers have been carried out by many authors since the 80s of the last century. However, all these studies were carried out on uniaxial stands and for mono-drive vehicles. Nowadays, a large number of passenger cars have four-wheel drive. Rolling of the wheels of such cars on rollers and their interaction has practically not been studied. Therefore, a return to the study of this issue is relevant. A power model of the system of interaction between the car and the stand has been developed, taking into account the design features of the stand and the design features of the car's suspension. The power model of the system under consideration contains the equilibrium equations of the body and two bridges and the equations of motion of the rollers and wheels of the car. Based on the results of the analysis of the acting forces in the "car-stand" system, the braking moments on the wheels M and the coefficients of the use of the load q during the braking tests of a 4x4 vehicle were determined. The obtained research results allowed to improve the theory of interaction of a car wheel with the rollers of an inertial diagnostic stand.

“...LOCOMOTIVES WILL FREEZE, FAMINE IS COMING, AND THERE ARE CASES OF TYPHUS...”. RAILWAYS OF THE GREAT SIBERIAN CAMPAIGN 1919–1920

2021 ◽  
pp. 121-138
Author(s):  
Vasily Zh. Tsvetkov ◽  
Keyword(s):  
Civil War ◽  
Technical Condition ◽  
The State ◽  
Rolling Stock ◽  
Documentary Evidence ◽  
Eastern Front ◽  
History Of ◽  
The Russian Federation ◽  
State Archives ◽  
The Military

The publication of documentary materials reflects the history of the organization and conducting of the retreat of the units of Admiral A.V. Kolchak’s Eastern Front and the evacuation of civilian refugees from Omsk and other cities in Siberia in November 1919 – January 1920. The article considers the issues of the technical condition and operation of the TRANSSiberian railway and, in particular, the functioning of the rolling stock. Those aspects for the history of the Civil War in the East of Russia to this day remain poorly studied. Evidence is provided on the state of the military, refugee and civil trains, and about the situation of passengers. Consistently and with the involvement of documentary material, the stages of the preparation and implementation of evacuation measures are described, and the reasons for the failure of planned decisions are analyzed. The article presents evidence on the consequences of full-scale disaster with the railway accident that became part of the Civil War history in Siberia. The materials from the State Archives of the Russian Federation that have not been widely used in scientific research and have not been published yet, as well as some previously published documentary evidence, were used. The study of that aspect of the Civil War history in Siberia allows to get an idea of not only the military, but also of the political importance that the TRANS-Siberian railway played in the absence of developed transport communications in the East of Russia.

Monitoring the technical condition of the railway track using the method of continuous recording of dynamic processes occurring due to the interaction between rolling stock and railway track

2021 ◽  
pp. 66-82
Author(s):  
Yuriy P. BORONENKO ◽  
◽  
Aleksandr V. TRET’YAKOV ◽  
Rustam V. RAKHIMOV ◽  
Mariya V. ZIMAKOVA ◽  
...  
Keyword(s):  
Practical Importance ◽  
Stability Margin ◽  
Technical Condition ◽  
Continuous Recording ◽  
Railway Track ◽  
Lateral Interaction ◽  
Rolling Stock ◽  
Monitoring Method ◽  
Wheel Pair ◽  
Interaction Forces

Objective: To develop the method to monitor the technical condition of the railway track. Me-thods: A strain-gauge wheel pair is used for continuous recording of vertical and lateral interaction forces in a dynamic wheel–rail system. Results: Stability margin factors of a wagon relative to de-railment have been determined and the defective (prone to derailment) sections of a railway track have been identified with the exact identification of their location (GPS coordinates) on the map using navigation devices. Practical importance: The developed monitoring method makes it possi-ble to promptly re¬gister and eliminate railway track defects

Mathematical Justification of the New Method of Determination of Wheel Pair’s and Rail’s Damage

2009 ◽  
Author(s):  
Nikoloz Mgebrishvili ◽  
Guri Sharashenidze ◽  
Manana Moistsrapishvili ◽  
Sergo Sharashenidze ◽  
Liana Kuparashvili ◽  
...  
Keyword(s):  
Mathematical Model ◽  
Mobile Device ◽  
Traffic Safety ◽  
Economic Effect ◽  
Rolling Stock ◽  
Wheel Pair ◽  
Railway Traffic ◽  
Accuracy Of Measurement ◽  
Mathematical Justification

Development of modern railways largely depends on the control of intactness of the wheel pairs and rails. It is impossible to ensure safety and increase the speed of railway traffic without providing such control. Detection of the wheel pairs’ and rails’ wear and damage is one of the key problems of railway science. Many scientific works are accomplished and lot of devices are elaborated in this field, but the mentioned problem still remains urgent. In order to increase the traffic safety, the group of authors has proposed a constructional scheme of the mobile device for detection of wheel pairs’ and rails’ wear and damage, which will have increased accuracy of measurement. Increasing of accuracy of measurement is carried out on the basis of development of mathematical model, which provides the realization of equal wear of wheel pairs’ as well as ones no equal wear. By installation of the proposed device on each wheel pair of each railcar of the rolling stock, the automatic control of wheel pairs’ and rails’ condition will be achieved. Namely: -Detection of the worn out wheel pair and determination of wear degree; -Detection of the damaged wheel pair; -Identification of the worn out or damaged wheel pair. Besides, on the basis of elaborated mathematical model: -Detection of the worn out rail; -Detection of the damaged rail; -Identification of location of the worn out or damaged rail. The obtained information will be constantly connected to the locomotive computer system. Therefore, for checking rolling stocks, there will no longer be need to build expensive stationary systems, to move trains great distances for their inspection and in the result, the time lost for stoppage will be saved. So, with the help of proposed mobile device, the traffic safety increases and at the same time expenses for detection of wheel pairs’ wear and damage decrease, which results in significant economic effect.

scholarly journals The use of correlation and regression analysis for assessment of the energy effectiveness of the dc electric locomotives auxiliary equipment

2018 ◽  
Vol 239 ◽  
pp. 01038 ◽  
Author(s):  
Stanislav Istomin
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Electricity Consumption ◽  
Technical Condition ◽  
Rolling Stock ◽  
Multiple Regression Equation ◽  
Electric Locomotive ◽  
Distribution Law ◽  
Auxiliary Equipment ◽  
Environment Temperature

Through additional processing of the modern movement parameter recorders data of the DC electric locomotive 2ES6 the article first presents the results of the actual consumption of electricity for own needs and the proportion of these costs from the consumption of trains traction is determined, which in terms of operational depot is difficult to implement. The estimation of influencing factors on the energy consumption for own needs of 2ES6 series electric locomotives is made. As a result it was found that the internal energy consumption is influenced by such factors as rolling stock mass, axle load and environment temperature. Statistic models were made to normalize internal electricity consumption and their quality estimation was fulfilled. It is found that the remainders of the multiple regression equation, which take the above factors into account, obey the normal distribution law, indicating the adequacy of their further use to assess the energy efficiency of the 2ES6 series DC electric locomotives auxiliary equipment. The use of regression models will allow to identify electric locomotives with auxiliary equipment with low energy efficiency and to send them to unscheduled repairs in time to restore the required technical condition.

Sign in / Sign up

Export Citation Format

Share Document