scholarly journals Visual Measurement of Air-containing Level in Hydraulic Oil with Lab VIEW

2014 ◽  
Vol 7 (16) ◽  
pp. 3209-3215
Author(s):  
Hailian Wang ◽  
Xiaodong Zhang
2020 ◽  
pp. 77-78

The use of ultra-high molecular weight polyethylene (UHMW PE) for the manufacture of various parts, in particular cuffs for hydraulic drives, is proposed. The properties and advantages of UHMW PE in comparison with other polyethylene materials are considered. Keywords ultra-high molecular weight polyethylene, hydraulic pump, hydraulic motor, hydraulic control valve, hydraulic oil, low temperature. [email protected]


ROBOT ◽  
2011 ◽  
Vol 33 (3) ◽  
pp. 299-302 ◽  
Author(s):  
Yi WANG ◽  
Changjie LIU ◽  
Xueyou YANG ◽  
Shenghua YE

2012 ◽  
Vol 23 (3) ◽  
pp. 199-204 ◽  
Author(s):  
Bruno Carvalho de Vasconcelos ◽  
Leonardo de Alencar Matos ◽  
Elilton Cavalcante Pinheiro-Júnior ◽  
Antônio Sérgio Teixeira de Menezes ◽  
Nilton Vivacqua-Gomes

This study evaluated the accuracy of three electronic apex locators (Root ZX, Novapex, and Justy II) in root canal length determinations using different apical file sizes, considering the apical constriction (AC) and the major foramen (MF) as anatomic references. The diameter of the apical foramina of 40 single-rooted teeth was determined by direct visual measurement and the master apical file was established. Electronic measurements were then performed using 3 instruments: the selected master apical file (adjusted file), one size smaller (intermediate file), and two sizes smaller (misfit file). The distances from the tip of files fixed in the canals to the MF and to the AC were measured digitally. Precision at AC and at MF for the misfit, intermediate and adjusted apical files was as follows: 80%/88%/83% and 78%/83%/95% (Root ZX); 80%/85%/80% and 68%/73%/73% (Novapex); and 78%/80%/78% and 65%/78%/70% (Justy II). Considering the mean discrepancies, statistically significant differences were found only for the adjusted file at MF, with Root ZX presenting the best results at MF. The chi-square test showed significant differences between the acceptable measurements at AC and at MF for the Justy II and Novapex (± 0.5 mm) regardless of file adjustment. Under the conditions of the present study, all devices provided acceptable electronic measurements regardless of file adjustment, except for Root ZX which had its performance improved significantly when the precisely fit apical file was used. Justy II and Novapex provided electronic measurements nearest to the AC.


Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 150
Author(s):  
Hongpeng Zhang ◽  
Haotian Shi ◽  
Wei Li ◽  
Laihao Ma ◽  
Xupeng Zhao ◽  
...  

Hydraulic oil is the key medium for the normal operation of hydraulic machinery, which carries various wear debris. The information reflected by the wear debris can be used to predict the early failure of equipment and achieve predictive maintenance. In order to realize the real-time condition monitoring of hydraulic oil, an impedance debris sensor that can detect inductance and resistance parameters is designed and studied in this paper. The material and size of wear debris can be discriminated based on inductance-resistance detection method. Silicon steel strips and two rectangular channels are designed in the sensor. The silicon steel strips are used to enhance the magnetic field strength, and the double rectangular detection channels can make full use of the magnetic field distribution region, thereby improving the detection sensitivity and throughput of the sensor. The comparison experiment shows that the coils in series are more suitable for the monitoring of wear debris. By comparing and analyzing the direction and the presence or absence of the signal pulses, the debris sensor can detect and distinguish 46 µm iron particles and 110 µm copper particles. This impedance detection method provides a new technical support for the high-precision distinguishing measurement of metal debris. The sensor can not only be used for oil detection in the laboratory, but also can be made into portable oil detection device for machinery health monitoring.


2015 ◽  
Vol 667 ◽  
pp. 449-454
Author(s):  
Yang Hong ◽  
Xiang Zhang ◽  
Dong Xiang Shao ◽  
Guang Lin Wang ◽  
Li Sun

This paper proposes a hydraulic measurement model for measuring the Laval nozzle throat diameter size. Based on measurement principle of liquid pressure – flowrate, we can get the size of Laval nozzle throat diameter by measuring the fluid flowrate through hydraulic measurement model at the fixed pressure. With good viscosity-temperature performance, low temperature performance and oxidation stability, UCBO aviation hydraulic oil is selected as the measuring medium. In the hydraulic measurement model, the diameter of the mandrel which can be regarded as gauge will directly affect the sensitivity of diameter measurement. Therefore we need to optimize the design of the mandrel of the hydraulic model.


2017 ◽  
Vol 866 ◽  
pp. 375-378
Author(s):  
Sathitbunanan Sumate ◽  
Wirote Ritthong

The ball bearings are the rotating components which are widely spread to moving parts for all machinery operation in general industry. This paper presents the ball bearing resistance tool which has a proper size and can handle the maximum load of 300 kg by using an electric power. The ball bearing resistance tool was used to test the bearings No. 6011 cm. The series of tests was performed in the ball bearings lubricated; engine oil SAE 10W/40, auto transmission fluid Dexron, and hydraulic oil. The rotational speeds for testing were vary; 500, 600 and 700 rpm respectively. At each speed, there were various weight; 50, 70, 90,110,130,150, and 170 kg respectively. The results show that the hydraulic oil generated the smallest coefficients of friction and energy efficiency for ball bearing operation.


2019 ◽  
Vol 1288 ◽  
pp. 012071
Author(s):  
Lili Tang ◽  
Wei Huang ◽  
Jie You
Keyword(s):  
Lab View ◽  

CIRP Annals ◽  
2006 ◽  
Vol 55 (1) ◽  
pp. 1-6 ◽  
Author(s):  
A. Watanabe ◽  
S. Sakakibara ◽  
K. Ban ◽  
M. Yamada ◽  
G. Shen ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document