Expertise of fire and industrial safety of buildings and building structures with crane loads

2017 ◽  
pp. 5-10
Author(s):  
Rasul Akhtyamov
Keyword(s):  
Human Error ◽  
Hazard Analysis ◽  
Practical Importance ◽  
Industrial Safety ◽  
Building Structures ◽  
Repair Work ◽  
Equipment Safety ◽  
Hazardous Production ◽  
Scientific Substantiation ◽  
Lifting Equipment

Objective: Scientific substantiation of a sequence of expertise of fire and industrial safety of buildings and building structures with crane loads. Methods: Decision making theory. Results: Discusses the problem of crane equipment safety included in the lists of machinery and equipment subject to obligatory certification of conformity requirements of technical regulations on safety of machines and equipment. In accordance with the analysis of the causes of accidents of crane equipment, it is established that the main cause of accidents are human error (e. g., violation of regulatory requirements when conducting repair work). Allocated and describes the characteristics of fire and industrial safety expertise of buildings and building structures with crane loads. The main content of the expertise is the preliminary hazard analysis, which is a method of analysis whose purpose is to identify hazards, hazardous situations and events that could cause harm hazardous production facilities operating lifting equipment. The author focuses on the fact that during the expertise of industrial safety is calculated of the actual physical deterioration of the crane equipment, and buildings with crane loads, to determine its further exploitation. Cast lifting devices into compliance with the requirements of fire and industrial safety is based on: peer-diagnostic tests; retrofitting the necessary equipment and safety devices; carrying out major rehabilitation and equipment repair. Practical importance: Еxpertise of industrial safety of buildings and building structures with crane loads in the proposed sequences will provide the required level of security and reliability of the equipment used; will allow you to reduce the downtime of equipment and time to repair used equipment.

scholarly journals Procedure for risk assessment of initiation and progression of oxidation processes during development of pyrite ore deposits

2020 ◽  
Vol 192 ◽  
pp. 03005
Author(s):  
Gennady Einbinder ◽  
Natalia Mitishova ◽  
Dmitry Radchenko ◽  
Egor Knyazkin
Keyword(s):  
Risk Assessment ◽  
Hazard Analysis ◽  
Ore Deposits ◽  
Industrial Safety ◽  
Accident Risk ◽  
Hazard Degree ◽  
Increased Risk ◽  
Sulfide Ore ◽  
Hazardous Production

In the modern conditions, the scale of subsoil transformation in the process of mineral extraction is characterized by an increased risk of accidents, often accompanied by man-made disasters. In this regard, hazard analysis and accident risk assessment is the most important scientific and technical task, the solution of which is based on methods for identification of hazards, study of development trends and assessment of consequences of theoretically possible accidents. In relation to development conditions of sulfide ore deposits, only an accident risk assessment with determination of the possible accident hazard degree, as well as preparation and timely correction of measures aimed at reduction of accident risks can ensure an acceptable level of industrial safety at the hazardous production facility.

scholarly journals Risk-based approach in “personnel-machinery-production environment” system at the facilities running tower cranes

2019 ◽  
Vol 19 (1) ◽  
pp. 56-62
Author(s):  
E. V. Yegelskaya ◽  
A. A. Korotkiy ◽  
E. A. Panfilova ◽  
A. A. Kinzhibalov
Keyword(s):  
Web Applications ◽  
Safety Management ◽  
Hazard Analysis ◽  
Industrial Safety ◽  
Production Environment ◽  
Open Communication ◽  
Accident Rate ◽  
Tower Crane ◽  
Hazardous Production ◽  
Proper Operation

Introduction. The paper discusses the applicability of a riskbased approach in the “personnel-machinery-production environment” system at the facilities running tower cranes through the introduction of IT-technologies that provide open communication of the staff, management team of the operating organizations, and the National Supervisory Authority, to reduce the accident rate.  Materials and Methods. An example of a hazardous production facility running tower cranes is given. Materials on the analysis of operational status of tower cranes within the framework of the current legislation in the field of industrial safety are used. The necessity for innovations and transformations, one of whose methods is the risk-based approach allowing for the implementation of all required levels of control, is identified.Research Results. The stages of introduction of the riskoriented approach for tower crane operators implemented through IT-technologies using Web-applications on safety management under the tower crane operation based on the hazard analysis and risk assessment in gamut, algorithmically associated with the electronic block key of its local security system, are determined.Discussion and Conclusions. The application of a risk-based approach in the “personnel-machinery-production environment” system at the facilities running tower cranes through the introduction of IT-technologies will ensure the proper operation of all departments and each participant of the operation, as well as provide Supervisory bodies with an opportunity to access information on the operation for the implementation of control and supervision functions remotely.

Industrial Safety Audit of Hazardous Production Facilities

2019 ◽  
pp. 60-69 ◽  
Author(s):  
Yu.F. Karabanov ◽  
◽  
A.S. Pecherkin ◽  
V.A. Tkachenko ◽  
V.I. Sidorov ◽  
...  
Keyword(s):  
Industrial Safety ◽  
Hazardous Production ◽  
Production Facilities

Systematic Approach to the Assessment of Production Control Functioning at Hazardous Production Facilities of Oil and Gas Industry

2021 ◽  
pp. 70-75
Author(s):  
R.I. Fatkhutdinov ◽  
◽  
Keyword(s):  
Control System ◽  
Systematic Approach ◽  
Oil And Gas ◽  
Production Control ◽  
Point Of View ◽  
Industrial Safety ◽  
Production Control System ◽  
System Functioning ◽  
Hazardous Production ◽  
Integral Indicator

One of the main causes of accidents at hazardous production facilities of oil and gas production is the inefficient work of production control over compliance with industrial safety requirements. At present there are no criteria for its assessment in the Russian legislation. It is established in the study that that production control in the industrial safety management system performs the role of «control» in accordance with the Shewhart-Deming cycle PDCA, and its main function is to work with nonconformities. In connection with the above, it is proposed to approach production control not only from the point of view of the process, but also from the system approach. To assess the system functioning, the criteria of «effectiveness», «efficiency», «integral indicator» are considered. It is established that from the point of view of proactivity in achieving the goals of production control, the most preferable is the assessment of the integral indicator of the production control system functioning. The considered existing and possible approaches to the assessment of the production control system and the statistical processing of the results of the expert assessment of nineteen parameters confirmed the need for a systematic approach. Based on this, the hypothesis of the production control system functioning is proposed and statistically substantiated, and four main parameters for calculating the integral indicator of the production control system functioning are considered. The built mathematical model based on the fuzzy logic clearly demonstrates the dependence of the integral indicator of the production control system functioning on the considered input parameters. The proposed proactive approach to the assessment of the production control system through nonconformity management is universal and applicable to the «control» function of any control system. It can also be used in the work of Rostechnadzor and be an incentive for enterprises to improve the quality, efficiency, and effectiveness of the production control system.

Slinger Personal Protection System at Load-Lifting Mechanism Operation Employing Radio-Frequency Identification Devices

2021 ◽  
pp. 38-44
Author(s):  
A.A. Korotkiy ◽  
◽  
E.V. Egelskaya ◽  
V.V. Egelskiy ◽  
A.A. Maslennikov ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
Information Technologies ◽  
Industrial Safety ◽  
Personal Protection ◽  
Personal Protection Equipment ◽  
Usual Practice ◽  
Hazardous Production ◽  
Special Rules ◽  
Hazardous Zone ◽  
Special Working

The rapid implementation of information technologies into all strata of the civil society activities has already significantly modified lives of every citizen, including production processes. The usual practice is using electronic safety devices in the technical units, including hoisting cranes. The consumer market offers remote control systems for equipment; continuous video surveillance over workflows is widely employed. Unmanned productions and unmanned technologies are being implemented, which is especially relevant at operation of potentially harmful and hazardous units. However, for a human actively participating in workflows, control and maintenance of technical devices, his/her safety during fulfillment of working functions is still a matter of great importance. In Russia, the requirements to production employees safety are determined by legislative and regulatory documents in the sphere of labor protection. Special rules of industrial safety are applied to hazardous production facilities. An important aspect of slinger protection against hazardous and harmful factors of production during operation of a hoisting crane as well as observing production discipline is using personal protection equipment and special working clothes. The constant monitoring of safety requirements in order to ensure their implementation in the real-time mode via the RFID-tags integrated into the elements of personal protection equipment and special working clothes is substantiated. The information on slinger location and availability of the required protection equipment within the hazardous zone of hoisting crane operation received to a mobile device of a person responsible for safe operation enables control of the situation, prevention of adverse events and minimization of risk of injury.

Safety audit of rail transport in open pit mines

2020 ◽  
pp. 602-613
Author(s):  
Yu. A. Bakhturin
Keyword(s):  
Industrial Safety ◽  
Open Pit ◽  
Rail Transportation ◽  
Test Procedures ◽  
Open Pit Mines ◽  
Actual Performance ◽  
Braking Performance ◽  
Safety Requirements ◽  
Performance Specifications ◽  
Hazardous Production

In order that the industrial safety audit at hazardous operation objects becomes a source of reliable information, it is required to develop the appropriate regulations and procedures. Inasmuch as Rostekhnadzor has aimed to cancel obligatory expertise of industrial safety, the function of the approval testing, at least to a certain degree, can be given to auditing. This article discusses two auditing scenarios: in case of systematic safety expertise at hazardous production objects and in case of no such expertise undertaken. A procedure is proposed, which allows control over conformance of actual performance specifications of rail transportation stock at an open pit mine to the industrial safety requirements in the frameworks of the safety audit. The procedure includes sampling braking tests, or the comparison of the actual braking performance indices of trains in the most hazardous sections of track with the braking parameters from the dynamic calculations. The method developed at the Institute of Mining, Ural Branch RAS enables taking into account the specific type of braking equipment, is based on the actual physical values and features higher accuracy. The case-studies of the braking test procedures and modeling are given.

Analyzing common approaches of accident models for risk management in socio-technical systems

2021 ◽  
Author(s):  
M. Kiwan ◽  
D.V. Berezkin ◽  
M. Raad ◽  
B. Rasheed
Keyword(s):  
Risk Management ◽  
Complex Systems ◽  
Human Error ◽  
Practical Importance ◽  
Individual Characteristics ◽  
Sociotechnical Systems ◽  
Technical Aspects ◽  
The Social ◽  
Technical Systems ◽  
Traditional Approaches

Statement of a problem. One of the main tasks today is to prevent accidents in complex systems, which requires determining their cause. In this regard, several theories and models of the causality of accidents are being developed. Traditional approaches to accident modeling are not sufficient for the analysis of accidents occurring in complex environments such as socio-technical systems, since an accident is not the result of individual component failure or human error. Therefore, we need more systematic methods for the investigation and modeling of accidents. Purpose. Conduct a comparative analysis of accident models in complex systems, identify the strengths and weaknesses of each of these models, and study the feasibility of their use in risk management in socio-technical systems. The paper analyzes the main approaches of accident modeling and their limitations in determining the cause-and-effect relationships and dynamics of modern complex systems. the methodologies to safety and accident models in sociotechnical systems based on systems theory are discussed. The complexity of sociotechnical systems requires new methodologies for modeling the development of emergency management. At the same time, it is necessary to take into account the socio-technical system as a whole and to focus on the simultaneous consideration of the social and technical aspects of the systems. When modeling accidents, it is necessary to take into account the social structures and processes of social interaction, the cultural environment, individual characteristics of a person, such as their abilities and motivation, as well as the engineering design and technical aspects of systems. Practical importance. Based on analyzing various techniques for modeling accidents, as well as studying the examples used in modeling several previous accidents and review the results of this modeling, it is concluded that it is necessary to improve the modeling techniques. The result was the appearance of hybrid models of risk management in socio-technical systems, which we will consider in detail in our next work.

Tasks of the Development and Implementation of Enterprise Industrial Safety Management System when Operating Technical Devices

2021 ◽  
pp. 15-19
Author(s):  
N.A. Makhutov ◽  
◽  
A.P. Cherepanov ◽  
M.V. Lisanov ◽  
◽  
...  
Keyword(s):  
Management System ◽  
Safety Management ◽  
Technical Condition ◽  
Industrial Safety ◽  
Automated System ◽  
Practical Implementation ◽  
Technical Diagnostics ◽  
Technical Device ◽  
Safety Management System ◽  
Hazardous Production

Development and practical implementation of the enterprise industrial safety management system considering the new requirements of the legislation on creation of the state system for monitoring, remote control, technical certification, and diagnostics of technical devices at hazardous production facilities supervised by Rostechnadzor is discussed in the article. To perform automated collection, recording, generalization, systematization, and evaluation of the information on the parameters that characterize safety of the enterprise hazardous equipment as a whole and each technical device, a block diagram of the enterprise automated industrial safety management system is proposed. The basics are suggested for creating the automated system containing a database that includes all the technical documentation, certificates and expert opinions, repair documentation and accompanying documents (orders, instructions, audit conclusions, etc.) for the efficiency of tracking the technical condition in real time considering changes in all the controlled parameters of the enterprise technological complexes. It is noted in the article that the assessment of the technical condition and life of single and unique technical devices that make up the bulk of equipment in hazardous production should be carried out already at the manufacturing stage by combining technical control with technical diagnostics, and their results should be included in the technical passport of the device. The need in this information for the operators is invaluable, especially after working out the manufacturer’s designated period of safe operation and for evaluating the actual technical condition and comparing it with its original, which was documented during fabrication. Data on the initial state allows to qualitatively assess the degradation processes that are developing during operation and consider them when evaluating the life of a technical device and conduct a qualitative audit of the industrial safety management system.

scholarly journals Information and educational resources on safety problems of hazardous production facilities

10.12737/223 ◽  
2013 ◽  
Vol 2 (1) ◽  
pp. 73-80
Author(s):  
Егоров ◽  
Aleksandr Egorov ◽  
Виноградов ◽  
A. Vinogradov ◽  
Запасная ◽  
...  
Keyword(s):  
Higher Education ◽  
Education System ◽  
Educational Resources ◽  
Industrial Safety ◽  
Higher Education System ◽  
Hazardous Production ◽  
Educational Guidance ◽  
Production Facilities

Some aspects of training of specialists in higher education system on problems of industrial safety of hazardous production objects of chemical and allied industries are considered. Information and educational resources for training on safety problems of hazardous production objects are presented: the electronic educational guidance with knowledge self-checking system and video lessons for performance of laboratory works.

scholarly journals Automated Risk Management Systems

2020 ◽  
pp. 11-15
Author(s):  
Amanulla Kadyrov ◽  
◽  
Aziza Kadyrova ◽  
Keyword(s):  
Risk Management ◽  
Maximum Level ◽  
Industrial Safety ◽  
Management Systems ◽  
Risk Modeling ◽  
Logical Scheme ◽  
Industrial Enterprises ◽  
Level Of Automation ◽  
Hazardous Production ◽  
Production Facilities

Creating an industrial safety management system for enterprises requires the development and application of a set of mechanisms that ensure the prevention of accidents and incidents. Risk management systems are one of the most effective mechanisms for industrial safety. However, very little attention has been paid to automation of risk management. This article is devoted to the formation of the conceptual framework for creating automated risk management systems for industrial enterprises with hazardous production facilities. The paper analyzes the structural and logical scheme of risk management. It is shown that one of the most “risk-bearing” components of hazardous production facilities are technical devices. At the same time, the maximum level of automation is possible for technical devices in relation to their maintenance, repair, and risk management tasks. Analysis of the tasks related to risk management shows their complexity and diversity. The solution of these problems is possible through the use of modern information technologies. At the same time, it is necessary to create a unified database of hazardous production facilities, a comprehensive database of regulatory, technical and legal information, automation of risk modeling and analysis of control processes, and decision-making and implementation of processes that minimize risks. At the same time, the maximum level of automation is possible for technical devices in relation to their maintenance, repair, and risk management tasks.

Sign in / Sign up

Export Citation Format

Share Document