scholarly journals INVESTIGASI SIFAT MAGNET DAN LUAS PERMUKAAN BENTONIT TERMAGNETISASI SEBAGAI ADSORBEN CEPAT PISAH

2021 ◽  
Vol 15 (2) ◽  
pp. 108
Author(s):  
Dyah Ayu Pramoda Wardani ◽  
Akhmad Damsyik ◽  
Karelius Karelius ◽  
Suyanta Suyanta ◽  
Dwi Siswanta
Keyword(s):  
Vibrating Sample Magnetometer

Bentonit merupakan material alam yang memiliki kecenderungan yang tinggi membentuk koloid, ukuran partikelnya yang dapat membesar sampai beberapa kali lipat jika terkontak dengan air dan membentuk suspensi, akan menimbulkan kesulitan dalam proses pemisahannya dari fasa cair setelah proses adsorpsi. Salah satu upaya untuk mengatasi kelemahan tersebut ialah dengan melakukan modifikasi bentonit menggunakan magnetit (Fe3O4), yang akan mengakibatkan adanya sifat kemagnetan pada material tersebut. Sifat kemagnetan ini diharapkan memudahkan pemisahan partikel–partikel bentonit termodifikasi setelah proses adsorpsi dapat dilakukan dengan mudah dan cepat menggunakan medan magnet eksternal. Dalam studi ini dikaji sifat kemagnetan bentonit termagnetisasi menggunakan instrumen VSM (Vibrating Sample Magnetometer) dan dikaji luas permukaan bentonit teraktivasi dan bentonit termagnetisasi menggunakan SSA (Surface Sorption Analyzer) berdasarkan persamaan BET.Hasil penelitian menunjukkan bahwa analisis VSM memberikan nilai Ms pada Fe3O4 murni lebih besar (64 emu/g) dibandingkan bentonit termagnetisasi (11 emu/g). Berdasarkan data analisis SSA diperoleh bahwa sampel bentonit termagnetisasi memiliki luas permukaan spesifik yang lebih kecil bila dibandingkan dengan bentonit teraktivasi, yaitu masing-masing sebesar 222 dan 138 m2/g.

Effect of Temperature on Fe3O4 Magnetic Nanoparticles Prepared by Coprecipitation Method

2014 ◽  
Vol 900 ◽  
pp. 172-176 ◽  
Author(s):  
Ji Mei Niu ◽  
Zhi Gang Zheng
Keyword(s):  
Magnetic Nanoparticles ◽  
Coprecipitation Method ◽  
Effect Of Temperature ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Magnetic Carriers ◽  
Average Grain Size ◽  
Or Gene ◽  
Block Temperature

The Fe3O4 magnetic nanoparticles obtained by the aqueous coprecipitation method are characterized systematically using scanning electron microscope, X-ray diffraction and vibrating sample magnetometer. These magnetic nanoparticles are spheric, dispersive, and have average grain size of 50 nm. The size and magnetic properties of Fe3O4 nanoparticles can be tuned by the reaction temperature. All samples exhibit high saturation magnetization (Ms=53.4 emu·g-1) and superparamagnetic behavior with a block temperature (TB) of 215K. These properties make such Fe3O4 magnetic nanoparticles worthy candidates for the magnetic carriers of targeted-drug or gene therapy in future.

Effect of Annealing temperature on the Structural and Magnetic Properties of TbxY3-xFe5O12(x = 0.0, 1.0, 2.0) Thin Films Prepared by Sol-Gel Process

2012 ◽  
Vol 501 ◽  
pp. 236-241 ◽  
Author(s):  
Ftema W. Aldbea ◽  
Noor Bahyah Ibrahim ◽  
Mustafa Hj. Abdullah ◽  
Ramadan E. Shaiboub
Keyword(s):  
Thin Films ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
X Ray ◽  
Garnet Phase ◽  
Sol Gel Process ◽  
Amorphous Structures

Thin films nanoparticles TbxY3-xFe5O12 (x=0.0, 1.0, 2.0) were prepared by the sol-gel process followed by annealing process at various annealing temperatures of 700° C, 800° C and 900° C in air for 2 h. The results obtained from X-ray diffractometer (XRD) show that the films annealed below 900°C exhibit peaks of garnet mixed with small amounts of YFeO3 and Fe2O3. Pure garnet phase has been detected in the films annealed at 900°C. Before annealing the films show amorphous structures. The particles sizes measurement using the field emission scanning electron microscope (FE-SEM) showed that the particles sizes increased as the annealing temperature increased. The magnetic properties were measured at room temperature using the vibrating sample magnetometer (VSM). The saturation magnetization (Ms) of the films also increased with the annealing temperature. However, different behavior of coercivity (Hc) has been observed as the annealing temperature was increased.

scholarly journals Carbon-coated magnetic particles increase tissue temperatures after laser irradiation

2015 ◽  
Vol 08 (05) ◽  
pp. 1550018 ◽  
Author(s):  
Shupeng Liu ◽  
Na Chen ◽  
Fufei Pang ◽  
Zhengyi Chen ◽  
Tingyun Wang
Keyword(s):  
Laser Irradiation ◽  
Magnetic Particles ◽  
Laser Energy ◽  
Thermal Therapy ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fbg Sensor ◽  
Transmission Electron ◽  
Carbon Coated

Purpose: This work focused on the investigation the hyperthermia performance of the carbon-coated magnetic particles (CCMPs) in laser-induced hyperthermia. Materials and methods: We prepared CCMPs using the organic carbonization method, and then characterized them with transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectrophotometry, vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). In order to evaluate their performance in hyperthermia, the CCMPs were tested in laser-induced thermal therapy (LITT) experiments, in which we employed a fully distributed fiber Bragg grating (FBG) sensor to profile the tissue's dynamic temperature change under laser irradiation in real time. Results: The sizes of prepared CCMPs were about several micrometers, and the LITT results show that the tissue injected with the CCMPs absorbed more laser energy, and its temperature increased faster than the contrast tissue without CCMPs. Conclusions: The CCMPs may be of great help in hyperthermia applications.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

scholarly journals Facile Organometallic Synthesis of Fe-Based Nanomaterials by Hot Injection Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1141
Author(s):  
Georgia Basina ◽  
Hafsa Khurshid ◽  
Nikolaos Tzitzios ◽  
George Hadjipanayis ◽  
Vasileios Tzitzios
Keyword(s):  
Room Temperature ◽  
Colloidal Particles ◽  
Iron Pentacarbonyl ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Organometallic Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Hot Injection ◽  
The Stability

Fe-based colloids with a core/shell structure consisting of metallic iron and iron oxide were synthesized by a facile hot injection reaction of iron pentacarbonyl in a multi-surfactant mixture. The size of the colloidal particles was affected by the reaction temperature and the results demonstrated that their stability against complete oxidation related to their size. The crystal structure and the morphology were identified by powder X-ray diffraction and transmission electron microscopy, while the magnetic properties were studied at room temperature with a vibrating sample magnetometer. The injection temperature plays a very crucial role and higher temperatures enhance the stability and the resistance against oxidation. For the case of injection at 315 °C, the nanoparticles had around a 10 nm mean diameter and revealed 132 emu/g. Remarkably, a stable dispersion was created due to the colloids’ surface functionalization in a nonpolar solvent.

Research on Effects of Mo Element on the Magnetic Properties of 1J79 Alloy

2010 ◽  
Vol 160-162 ◽  
pp. 1787-1790
Author(s):  
Jing Cao ◽  
Yong Feng Wang ◽  
Chun Xue Wei
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Crystal Growth ◽  
Saturation Magnetization ◽  
Electron Probe ◽  
Electric Arc ◽  
Experimental Results ◽  
Vibrating Sample Magnetometer ◽  
Electron Probe Microanalyzer ◽  
Mo Content

1J79 alloy was prepared by vacuum electric arc smelting．The crystal growth and the content of impurity was observed by electron probe microanalyzer，and magnetic properties were measured by vibrating sample magnetometer(VSM)．Experimental results show that inclusions in the alloy are fewer and fewer, composition becomes more uniform with the increases of the Mo content, and grain size also becomes larger and larger with the increases of Mo content, to reduce coercivity. The small amount of Mo addition is useful to improve the saturation magnetization and reduce coercivity．

Study on optical and magnetic properties of FexNi1-xMn2O4 materials

2021 ◽  
Vol 66 (1) ◽  
pp. 57-64
Author(s):  
Hang Pham Vu Bich ◽  
Yen Nguyen Hai ◽  
Mai Phung Thi Thanh ◽  
Dung Dang Duc ◽  
Hung Nguyen Manh ◽  
...  
Keyword(s):  
Single Phase ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
Raman Scattering Spectrum ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scattering Spectrum ◽  
Diffraction Diagram ◽  
Optical And Magnetic Properties ◽  
Scanning Electron

In this study, we present the process of synthesis FexNi1-xMn2O4 (x = 0; 0.1; 0.3; 0.5; 0.7; 0.9; 1) by method sol-gel. Scanning electron microscope results shows that the particle size is about 50 nm. The X-ray diffraction diagram shows that the samples are single phase, changing structure clearly as the x ratio increases from 0 to 1. The lattice constant, the bond length also changes with x-value as shown on the Raman scattering spectrum. The results of the vibrating sample magnetometer show that the magnetism of the material FexNi1-xMn2O4 changes with the value of x and reaches a maximum in the range x from 0.5 to 0.7.

Sign in / Sign up

Export Citation Format

Share Document